I.B.08. Combined Synopsis_Attachment 2_Q&A.pdf
PDF 53 KB Posted
- Attached to
- 143d LRS Fall Protection
- Solicitation number
- W50S94-25-Q-0006
- Issued by
-
Department of the Army National Guard
About this file
This document is a Questions and Answers (Q&A) file related to a federal contract opportunity for fall protection systems. The Q&A provides technical details about a facility's structural specifications, including an 18' floor-to-roof elevation, a standing seam metal roof, and specific dimensional measurements for roof joists and radiant heater clearance. The document indicates the solicitation is requesting 2 systems, and the contractor will not be using existing self-retracting fall protection devices. Structural details such as steel support spacing and complete construction drawings are referenced as being available on attached sheets (A-301, A-351, M-301, and structural drawings).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| I.B.08. Combined Synopsis_UPDATED.docx | DOCX document | |
| I.B.08. Combined Synopsis_Attachment 4_PWS.pdf | ||
| I.B.08. Combined Synopsis_Attachment 3_Floor Plan.pdf | ||
| I.B.08. Combined Synopsis.docx | DOCX document | |
| I.B.08. Combined Synopsis_Attachment 1_Specifications.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Q. What is the elevation from floor to roof?
A. 18’ (Sheet A-301 in attached drawings)
Q. What is the elevation from top of vehicle to the first roof joist?
A. Depends on vehicle. Finished floor to bottom of joist is 16’-8½” (Sheet A-351)
Q. What is the clearance of the radiant heater hanging from the ceiling?
A. 3’6” (Sheet M-301)
Q. Are you using the existing self-retracting devices for fall protection?
A. No
Q. How many systems are you requesting?
A. 2
Q. What is the spacing between steel supports?
A. See attached structural drawings, joists, purlins, posts, lintels shown.
Q. What is the roof made of?
A. Standing seam metal roof
Q. A system like this requires some engineering and we will need the structural drawings showing the beam and purlin configuration/sizing.
Are you able to supply those drawings?
A. Complete construction drawings attached.
File details come from the government source that posted it. Updated .