W50S8A-21-B-5202 _RFI Tracker 9Sept21.xlsx

XLSX spreadsheet 27 KB Posted

Attached to
Repair Main Gate Federal contract opportunity
Solicitation number
W50S8A-21-B-5202
Issued by
Department of the Army New Hampshire Army National Guard

About this file

This document contains an RFI tracker and details of a federal contract solicitation for repair work at a main gate. The RFI tracker includes questions received from contractors between September 3-7 regarding the opportunity requirements, such as confirmation that no hazardous materials are present, responsibility for moving barriers, and basis of design information for the required gate. The attached solicitation is from the Department of the Army New Hampshire Army National Guard to repair the main gate at Pease Air National Guard Base under solicitation number W50S8A-21-B-5202. Bids are due by an unspecified date. The work includes demolition of the existing gate and construction of a new gate per the attached specification, plans and drawings.

View the file

Other files for this federal contract opportunity

Other files attached to Repair Main Gate, newest first.
File Type Posted
Abstract to Offerors_update 17Sept21.pdf PDF
Abstract to Offerors_main Gate.pdf PDF
Bid Opening Sign in-sheet.pdf PDF
NH20210025 16JUL21.pdf PDF
Amendment 0002.pdf PDF
Site Visit Sign in.pdf PDF
PAS Attachment 1 Pre-Award Survery Questionnaire.docx DOCX document
PAS Attachment 2 Determination of Responsibility Document.docx DOCX document
PAS Attachment 3 Construction Contractor Experience Data.pdf PDF
SF1442.pdf PDF
Site visit map.pptx PPTX presentation
Amendment 0001.pdf PDF
Show all 12

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

RFI Tracker

SZCQ192390 Repair Main Gate
RFI NumberRFI TextDate Received from CTRCOR Response TextKO/KS Response TextSketch Posted (Title or N/A)KO InitialsSAM.gov Date of Change
1Can the Government confirm if the existing or new security gate system needs to have any security work through Advantor performed?3-Sep-214-Sep-21There is no work required by AdvantorNA9-Sep-21
2Please confirm if there are any hazardous materials?3-Sep-21No hazardous materials have been reported. Pease is located on a known PFC contaminated aquifer with historically high levels of PFOA and PFAS. The contractor will follow the requirments of specification section 01 35 40, 3.4, c "Water Resources", (2) "Groundwater"NA9-Sep-21
3Should taxes be carried in proposals?3-Sep-21New Hampshire does not have state taxes.NA9-Sep-21
4Please confirm if any state, local or federal permits are required?3-Sep-21Comply with Specification Section 01 30 00, 1.12 "Permits"NA9-Sep-21
5During the site visit we notice a lot of concrete jersey barriers. Please confirm who is responsible for removing, storing, and reinstalling them?3-Sep-21The NHANG will move the barriers and place them in the location as shown on sheet G-003NA9-Sep-21
6Drawing G-003 General Note 5 states to arrange for a NHANG security detail when the secure perimeter cannot be maintained. Please confirm if the detail is provided by the NHANG at a no cost to the contractor or are we to carry a cost for the detail? Also, if required more than ten days will there be a cost and if so how much?3-Sep-21As long the temporary fence (8' foot temporary security fence with a single strand of barbed wire, anchored to the pavement to prevent intruders from scaling or getting under the fence) is the first thing you accomplish before you start demolition then the security detail will not be required. This fence only applys to the fence in front of the existing gate. The fence behind the gate can be a standard fence with no special features.NA9-Sep-21
7Can the Government provide boring logs?3-Sep-21Refer to Existing Keynote 19 on Sheet CX101 and 3/C-501 for available subsurface information. The depth to groundwater will vary due to seasonal and weather conditions.NA9-Sep-21
8Fence contractors are having a tough time finding a gate that will comply with the specifications and drawings. Can the government provide a basis of design?3-Sep-21The basis of design is TyMetal Corporation www.tymetal.com 1-800-328-4283NA9-Sep-21
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40

File details come from the government source that posted it. Updated .