W50S7525BA0100002.pdf

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER.

If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

The purpose of this amendment is toBlock 14 (Description of Amendment/Modification):

A. Update Table of Contents with (Rev. 1) to add ATTACHMENT 4: RFI LOG, DATED 12 FEB 2025.

B. Update Section 00 21 00 with (Rev. 1) to close the RFI window on 12 FEB 2025.

C. Update Section 00 73 00 to reflect Wage Determination CA CA20250015 Mod-02.

D. Update FAR Clause 52.204-8 to reflect NAICS 238210.

E. The bid submission deadline remains unchanged.

F. All remaining solicitation terms and conditions remain in full force and effect.

Section 00 00 00 - Procurement and Contracting Requirements

The following changes have been made:

INFORMATION FROM TO

Party to receive Solicitation

W50S75

W7MX USPFO ACTIVITY CAANG

119 MULCAHEY DR, PORT

HUENEME CA 93041-4011

PORT HUENEME, CA 93041-4011

UNITED STATES

W50S75

W7MX USPFO ACTIVITY CAANG 146

KO FOR CAANG DO NOT DELETE,

119 MULCAHEY DR

PORT HUENEME, CA 93041-4011

UNITED STATES

Section 00 10 00 - Solicitation, Contract Line Item Number (CLIN) Schedule

Miscellaneous text in this section has been modified to:

TABLE OFCONTENTS (REV 1)

STANDARD FORM 1442 - SOLICITATION, OFFER, AND AWARD

SECTION00 10 00 - BID SCHEDULE, NOTES

SECTION 00 21 00 - INSTRUCTIONS, CONDITIONS, AND NOTICES TO BIDDERS

SECTION 00 45 00 - REPRESENTATIONS & CERTIFICATIONS

SECTION 00 70 00 - CONTRACT CLAUSES

SECTION 00 73 00 - SPECIAL CONTRACT REQUIREMENTS

W50S7525BA0100002

SECTION 01 00 00 - GENERAL REQUIREMENTS

ATTACHMENT 1 - PROJECT DJCF202101 DRAWINGS

ATTACHMENT 2 - PROJECT DJCF202101 SPECIFICATIONS

ATTACHMENT 3 - PROJECT DJCF202101 BRAND NAME JUSTIFICATION

ATTACHMENT 4 - RFI LOG, DATED 12 FEB 2025

SECTION 00 10 00 NOTES

1. All information relating to this Invitation for Bids (IFB), including pertinent changes/amendments and information will be posted to the Contract Opportunities module of the System for Award Management (SAM) website (www.sam.gov).

2. For security reasons, all potential bidders, plan rooms, printing companies, etc. are required to be registered with the SAM website to access secured files. Interested bidders are also required to submit their annual representations and certifications at the same site.

3. Facsimile and electronic transmission of bids is not authorized and will not be accepted.

4. A complete bid package must contain the following:

4.1. Standard Form (SF)1442, , front and back. Pursuant to Federal Solicitation, Offer, and Award Acquisition Regulation 4.102, , blocks 20A, 20B, and 20C must be signed Contractor's Signature by an official having the authority to contractually bind the company. One copy of the SF1442 is required to have an original signature.

4.2. Section 00 10 00, , all line items must be priced.Bid Schedule

4.3. A Bid Bond and Power of Attorney must be submitted with the bid and on the due date. Pursuant to Department of Defense (DOD)Deviation 2020-O0016, electronic signatures and electronic/mechanically applied, or printed dates may be used and shall be considered original signatures and dates. The bid bond must be on a SF24, Bid Bond. Rejection of a bid bond shall be handled in accordance with Federal Acquisition Regulation (FAR) 28.101-4, Noncompliance with Bid Guarantee Requirements.

4.4. Section 00 45 00, Representations and Certifications, completed. Complete and return only additional certifications that are included in this section but are not included with the bidder's current/complete representations and certifications(within the past year) in the Entity Information module of the SAM website.

4.5. Any/all amendments to the solicitation must be acknowledged. This may be accomplished either collectively using block 19 of theSF1442 (back side), or individually using a copy of each SF30, Amendment of Solicitation/Modification of Contract.

4.6. Mark the front of the envelope with the solicitation number (see block 1 of the SF1442), and the name and address of the Bidder. See block 13Aof the SF1442 for required number of copies of the bid that must be submitted.

5. Joint Venture Requirements.

5.1. Bidders wishing to submit a bid as a Joint Venture (JV) must also submit (with the pro forma documents) a copy of the JV agreement that is executed in accordance with FAR4.102(d).

Additionally, each JV partner shall submit evidence that its board of directors has approved its participation in the JV. For an unincorporated entity, submit an instrument of similarly binding character.

5.2. JV bidders are reminded that the JV entity must be registered in the Entity Information module of the SAM website. For solicitations that are set-aside, the JV must also meet the applicable size standard. If the JV entity has received a size determination from the Small Business Administration (SBA), submit a copy of that determination with the bid.

5.3. Pursuant to FAR19.302(b), the Contracting Officer may protest the small business representation or representation of a JV entity where one (1) or more of the party/parties appears to not meet the set-aside standard. All questions regarding JVs must be directed to SBA.

5.4. Pursuant to FAR52.204-8(d), , and 52.212-3(b), Annual Representations and Certifications Representations and , small Certifications--Commercial Products and Commercial Services business JV entities must submit the appropriate representations at 52.212-3(c)and 52.219-1(c).

(End of Section 00 10 00)

Section 00 21 00 - Instructions

Miscellaneous text in this section has been modified to:

SECTION 00 21 00 (REV. 1) INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

1. Description of the Project: Non-personal construction services to provide all plant, labor, transportation, materials, tools, equipment, appliances, and supervision necessary to perform and complete the Base Wide Fire Alarm Systems Repair project at the 146th Airlift Wing.

2. Instructions to Bidders.

2.1. You are invited to submit a bid in response to Invitation for Bids (IFB) W50S75-25-B-A010,"Repair Base Wide Fire Alarm Systems".

2.2. Asa result of this solicitation, the Government intends to award a firm-fixed-price contract resulting from this solicitation to the responsible bidder whose bid, conforming to the invitation for bids, will be most advantageous to the Government, considering only price.

2.3. This solicitation is set-aside 100% for small businesses.

3. Evaluation for Award. Additive or deductive bid items are not included in this acquisition.

4. Notice of Pre-Bid Conference and Site Visit.

4.1. A pre-bid conference on bid requirements and to answer questions will be held. Reference solicitation provision 52.236-27, Site Visit , for details. bidders and (Construction) All interested subcontractors are highly encouraged to attend. A site visit will be held following the conference.

4.2. must register for the conference and site visit no later than three (3) business days All attendees prior to the meeting. This will provide the installation's security forces adequate time to screen attendees and grant access to the installation. Providing this information is voluntary; however, failure to provide it may result in denial of access to the installation. Please note that individuals who already have access to the installation are required to register to ensure there is adequate seating.

4.3. Please direct all security access coordination through MSgt Randy Van Otten and MSgt Jaime Jimenez by emailing the information below (for each attendee) to randolph.van_otten.2@us.af.mil and jaime.jimenez.1@us.af.mil:

4.3.1. Firm's name;

4.3.2. Firm's telephone number;

4.3.3. Attendee's name;

4.3.4. Attendee's driver license number; and

4.3.5. Attendee's citizenship.

4.4. Attendees must process through the installation's main gate prior to arrival and will be required to present the following information:

4.4.1. Driver license;

4.4.2. Vehicle registration;

4.4.3. Rental car contract/agreement; and

4.4.4. Proof of vehicle insurance.

4.5. provided is protected under the Privacy Act and shall not be released unless All information permitted by law and/or consent of the individual.

4.6. at this conference or site visit shall not qualify the terms and conditions of Information provided the solicitation and specifications. Terms of the solicitation and specifications remain unchanged unless the solicitation is amended in writing. If an amendment is issued, normal procedures relating to the acknowledgment and receipt of solicitation amendments shall apply.

4.7. of the conference will be available to all prospective bidders through the Contract A record Opportunities module of the SAM website. The record will include minutes of the meeting, any questions asked, and any answers provided.

5. and Explanations to Bidders. Formal Communications

5.1. Use of the System for Award Management.

5.1.1. The solicitation and any technical and/or engineering data for this solicitation will be distributed using the Contract Opportunities module of the SAM website. Technical/engineering data may locked/secured and require bidders to request explicit access to this solicitation from the contracting office. Bidders may also request the data via export controlled access through the Defense Logistics Agency.

5.1.2. access locked/secure data through the contracting office will require the Requests to individual to have a registered account with the SAM website.

5.1.3. access to locked/secure data, you must provide your firm's name and When requesting either Unique Entity Identification (UEID) or Commercial and Government Entity(CAGE) code as part your request. This information is not provided automatically and failure to provide it will result in your request being denied.

5.1.4. (2) business days for the contracting office to process your access to the locked Allow two /secured data.

5.1.5. (to include training) is available through the SAM website. The Complete instructions California National Guard is unable to provide technical assistance with the site.

5.2. the Solicitation. Amendments to

5.2.1. to the solicitation or contract documents (i.e., drawings, plans, specifications, Any changes statements of work, etc.) shall be issued to bidders as a formal amendment and disseminated through Contract Opportunities.

5.2.2. must acknowledge all amendments either collectively on the SF1442(block 19, All bidders back side), or individually with each amendment's SF30, Amendment of Solicitation/Modification

. All acknowledgements for all amendments must be received by the time set for of Contract receipt of bids.

5.3. Pre-Bid Inquiries.

5.3.1. pre-bid inquiries that clarify or provide interpretations of the solicitation or Answers to contract documents will not be issued as an amendment and do not require acknowledgement.

or responses to inquiries will be provided through the Contract Opportunities All amendments module.

5.3.2. re-bid inquiries pertaining to this solicitation is closed on 12 Feb 2025. This provides P adequate time for the Government to answer the question and post its response to Contract Opportunities for the benefit of all bidders. Bidders are strongly encouraged to submit questions early in this process.

5.3.3. Do not contact the architect-engineer or technical personnel directly as this may delay the Government's response.

5.3.4. Please reference the solicitation number as part of the subject line (see block 1 of the SF1442), and include pertinent contact information with your inquiry to: 146AW.MSG.

Contracting@us.af.mil, william.tucker.32@us.af.mil and toni.wasgatt@us.af.mil

6. and Bid Opening. Bid Repository

6.1. Hand carried bids must be deposited in the provided bid repository before the time established for opening of bids. Bidders are cautioned that they will be required to process through the installation's security forces and should account for this time. See Paragraph 4 (above) for installation access procedures.

6.2. of bids caused by entry delays may not be deemed excusable and the Contracting Late receipt Officer may declare the bid late in accordance with FAR 14.304, Submission, Modification, and

.Withdrawal of Bids

6.3. The bid opening will occur at the time and date specified in Block 13 of the SF1442 or as amended. All interested offerors and their subcontractors are encouraged to attend the bid opening.

7. Wage Determination. Construction Wage Rates are applicable to this project and are provided in Section 00 73 00 of this solicitation.

8. Bid Preparation Expenses and Pre-Contract Costs. This IFB does not commit the Government to pay costs incurred in preparation and submission of bids or for any other costs incurred prior to award of a formal contract.

9. Clauses and Provisions. Clauses and provisions from the FAR, Defense FAR Supplement, and Army FAR Supplement are incorporated with this solicitation by reference and in full text. Those incorporated by reference have the same force and effect as if they were given in full text.

10. Disposition of Unsuccessful Bids. In compliance with FAR Subpart 4.8, Government Contract Files , one copy of all unsuccessful bids will be retained by the Government.

11. Bidder Qualifications. To establish a bidder's responsibility, the Government may request the apparent low bidder to submit a statement regarding their experience in performing comparable work, business and technical organization, financial and bonding resources, and available plant/equipment to be used in performing the work.

12. Brand Name or Sole Source Justifications. There are brand name/sole source justifications pertinent to this solicitation.

13. NG Agency Protest Program. Intended to encourage interested parties to seek resolution of their concerns with the National Guard (NG) as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods as if filed at the GAO. The NG protest decision goal is to resolve protests within 35 calendar days from filing.

An agency protest may be filed with either the Contracting Officer or the NG Agency's Protest Decision Authority, but not both, in accordance with NG protest procedures. To be timely, the protests must be filed with the periods specified in FAR 33.103. To file a protest under the NG Agency Protest Program, the protest must request resolution under that program and be sent to the address below:

National Guard Bureau Office of the Director of Acquisitions/ Head of Contracting Activity

ATTN: NGB-AQ-O

111 S. George Mason Dr.

Arlington, VA 22204 Email: ng.ncr.ngb-arng.mbx.ngb-task-order-ombudsman@mail.mil

All other agency-level protests should be sent to the Contracting Officer for resolution at the address in the solicitation. See FAR clause 52.233-2.

(End of Section 00 21 00)

Section 00 45 00 - Representations and Certifications

The following clauses were modified:

52.204-8Annual Representations and Certifications.May 2024 hereby reads as follows:

As prescribed in , insert the following provision:4.1202(a)

Annual Representations and Certifications (May 2024)

(a)

(1) The North American Industry Classification System (NAICS) code for this acquisition is 238210.

(2) The small business size standard is .$19,000,000.00

(3) The small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519 if the acquisition-

(i) Is set aside for small business and has a value above the simplified acquisition threshold;

(ii) Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or

(iii) Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(b)

(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.

(2) If the provision at 52.204-7, System for Award Management, is not included in this solicitation, and the Offeror has an active registration in the System for Award Management (SAM), the Offeror may choose to use paragraph (d) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The Offeror shall indicate which option applies by checking one of the following boxes:

(i) Paragraph (d) applies.

(ii) Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.

(c)

(1) The following representations or certifications in SAM are applicable to this solicitation as indicated:

(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless-

(A) The acquisition is to be made under the simplified acquisition procedures in part 13;

(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or

(C) The solicitation is for utility services for which rates are set by law or regulation.

(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.

(iii) 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation. This provision applies to all solicitations.

(iv) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204-7, System for Award Management.

(v) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that-

(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and

(C) Are for contracts that will be performed in the United States or its outlying areas.

(vi) 52.204-26, Covered Telecommunications Equipment or Services-Representation. This provision applies to all solicitations.

(vii) 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations-Representation.

(viii) 52.209-5, Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.

(ix) 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. This provision applies to all solicitations.

(x) 52.214-14, Place of Performance-Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.

(xi) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.

(xii) 52.219-1, Small Business Program Representations (Basic, Alternates I, and II). This provision applies to solicitations when the contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii).

(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.

(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.

(C) The provision with its Alternate II applies to solicitations that will result in a multiple-award contract with more than one NAICS code assigned.

(xiii) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii).

(xiv) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity.

(xv) 52.222-25, Affirmative Action Compliance. This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal Opportunity.

(xvi) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial products or commercial services.

(xvii) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of biobased products in USDA-designated product categories; or include the clause at 52.223-2, Reporting of Biobased Products Under Service and Construction Contracts.

(xviii) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA-designated items.

(xix) 52.223-22, Public Disclosure of Greenhouse Gas Emissions and Reduction Goals-Representation.

This provision applies to solicitations that include the clause at 52.204-7.

(xx) 52.225-2, Buy American Certificate. This provision applies to solicitations containing the clause at 52.225-1.

(xxi) 52.225-4, Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Basic, Alternates II and III.) This provision applies to solicitations containing the clause at 52.225-3.

(A) If the acquisition value is less than $50,000, the basic provision applies.

(B) If the acquisition value is $50,000 or more but is less than $100,000, the provision with its Alternate II applies.

(C) If the acquisition value is $100,000 or more but is less than $102,280, the provision with its Alternate III applies.

(xxii) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225-5.

(xxiii) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan-Certification. This provision applies to all solicitations.

(xxiv) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications. This provision applies to all solicitations.

(xxv) 52.226-2, Historically Black College or University and Minority Institution Representation. This provision applies to solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions.

(2) The following representations or certifications are applicable as indicated by the Contracting Officer:

[ ]Contracting Officer check as appropriate.

52.204-17, Ownership or Control of Offeror.(i)

52.204-20, Predecessor of Offeror.(ii)

52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products.(iii)

52.222-48, Exemption from Application of the Service Contract Labor Standards to Contracts for (iv) Maintenance, Calibration, or Repair of Certain Equipment- Certification.

52.222-52, Exemption from Application of the Service Contract Labor Standards to Contracts for (v) Certain Services-Certification.

52.227-6, Royalty Information.(vi)

Basic.(A)

Alternate I.(B)

52.227-15, Representation of Limited Rights Data and Restricted Computer Software.(vii)

(d) The offeror has completed the annual representations and certifications electronically in SAM website accessed through https://www.sam.gov. After reviewing the SAM information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [ ]. These offeror to insert changes, identifying change by clause number, title, date amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

FAR Clause # Title Date Change

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on SAM.

(End of provision)

Section 00 73 00 - Supplementary Conditions

Miscellaneous text in this section has been modified to:

"General Decision Number: CA20250015 02/07/2025

Superseded General Decision Number: CA20240015

State: California

Construction Types: Building, Heavy (Heavy and Dredging) and Highway

County: Ventura County in California.

BUILDING, DREDGING (does not include hopper dredge work), HEAVY (does not include water well drilling), AND HIGHWAY

CONSTRUCTION PROJECTS

Note: Contracts subject to the Davis-Bacon Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

Please note that these Executive Orders apply to covered contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but do not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(1).

|If the contract is entered |. Executive Order 14026 | |into on or after January 30, | generally applies to the | |2022, or the contract is | contract. | |renewed or extended (e.g., an |. The contractor must pay | |option is exercised) on or | all covered workers at | |after January 30, 2022: | least $17.75 per hour (or | | | the applicable wage rate | | | listed on this wage | | | determination, if it is | | | higher) for all hours | | | spent performing on the | | | contract in 2025. | |If the contract was awarded on|. Executive Order 13658 | |or between January 1, 2015 and| generally applies to the | |January 29, 2022, and the | contract. | |contract is not renewed or |. The contractor must pay all| |extended on or after January | covered workers at least | |30, 2022: | $13.30 per hour (or the | | | applicable wage rate listed| | | on this wage determination,| | | if it is higher) for all | | | hours spent performing on | | | that contract in 2025. |

The applicable Executive Order minimum wage rate will be adjusted annually. If this contract is covered by one of the Executive Orders and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must still submit a conformance request.

Additional information on contractor requirements and worker protections under the Executive Orders is available at http://www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/03/2025 1 01/24/2025 2 02/07/2025

ASBE0005-002 09/01/2023

Rates Fringes

Asbestos Workers/Insulator (Includes the application of all insulating materials, protective coverings, coatings, and finishes to all types of mechanical systems).....$ 49.58 25.27 Fire Stop Technician (Application of Firestopping Materials for wall openings and penetrations in walls, floors, ceilings and curtain walls)...........................$ 36.97 20.36

ASBE0005-004 07/04/2022

Rates Fringes

Asbestos Removal worker/hazardous material handler (Includes preparation, wetting, stripping, removal, scrapping, vacuuming, bagging and disposing of all insulation materials from mechanical systems, whether they contain asbestos or not)....$ 23.52 13.37

BOIL0092-003 01/01/2024

Rates Fringes

BOILERMAKER......................$ 51.98 42.11

* BRCA0004-012 05/01/2024

Rates Fringes

BRICKLAYER; MARBLE SETTER........$ 45.53 20.29

*The wage scale for prevailing wage projects performed in Blythe, China lake, Death Valley, Fort Irwin, Twenty-Nine Palms, Needles and 1-15 corridor (Barstow to the Nevada State Line) will be Three Dollars ($3.00) above the standard San Bernardino/Riverside County hourly wage rate

BRCA0018-004 06/01/2023

Rates Fringes

MARBLE FINISHER..................$ 40.21 15.23

TILE FINISHER....................$ 34.78 13.64

TILE LAYER.......................$ 48.29 19.18

BRCA0018-010 09/01/2023

Rates Fringes

TERRAZZO FINISHER................$ 39.95 14.65

TERRAZZO WORKER/SETTER...........$ 47.85 15.14

CARP0213-001 01/01/2024

Rates Fringes

CARPENTER

(1) Carpenter, Cabinet Installer, Insulation Installer, Hardwood Floor Worker and acoustical installer...................$ 48.86 22.88

(2) Millwright..............$ 49.36 22.88

(3) Piledrivermen/Derrick Bargeman, Bridge or Dock Carpenter, Heavy Framer, Rock Bargeman or Scowman, Rockslinger, Shingler (Commercial)................$ 48.99 22.88

(4) Pneumatic Nailer, Power Stapler...............$ 51.85 16.28

(5) Sawfiler...............$ 51.69 16.28

(6) Scaffold Builder.......$ 40.77 22.38

(7) Table Power Saw Operator....................$ 51.70 16.28

FOOTNOTE: Work of forming in the construction of open cut sewers or storm drains, on operations in which horizontal lagging is used in conjunction with steel H-Beams driven or placed in pre- drilled holes, for that portion of a lagged trench against which concrete is poured, namely, as a substitute for back forms (which work is performed by piledrivers): $0.13 per hour additional.

CARP0213-002 07/01/2021

Rates Fringes

Diver

(1) Wet.....................$ 834.40 16.28

(2) Standby.................$ 445.84 16.28

(3) Tender..................$ 437.84 16.28

(4) Assistant Tender........$ 413.84 16.28

Amounts in ""Rates' column are per day

CARP0213-004 01/01/2024

Rates Fringes

Drywall

DRYWALL INSTALLER/LATHER....$ 48.86 22.88

STOCKER/SCRAPPER............$ 20.80 9.97

CARP0721-001 07/01/2021

Rates Fringes

Modular Furniture Installer......$ 21.85 7.15

ELEC0952-001 09/30/2024

Rates Fringes

Electricians: (All work within 32 road miles from the nearest base point) Cable Splicer...............$ 56.47 30.55 Electrician Transportation Systems Technician Journeyman Wireman - Street Lighting & Traffic Signals..........$ 51.34 30.40 Transportation Systems Technician - Street Lighting & Traffic Signals..$ 38.51 30.02

ALL WORK MORE THAN 32 ROAD MILES FROM NEAREST BASE POINT:

Add $5.00 to the basic hourly rate. BASE POINTS: the main Post Office in the cities of Camarillo, Oak View, Oxnard, Santa Paula and Ventura.

ELEC0952-005 07/01/2024

COMMUNICATIONS AND SYSTEMS WORK

Rates Fringes

Communications System Installer...................$ 46.07 18.01

SCOPE OF WORK:

Installation, testing, service and maintenance of systems utilizing the transmission and/or transference of voice, sound, vision and digital for commercial, educational, security and entertainment purposes for the following: TV monitoring and surveillance, background-foreground music, intercom and telephone interconnect, inventory control systems, microwave transmission, multi-media, multiplex, nurse call systems, radio page, school intercom and sound, burglar alarms, fire alarm (see last paragraph below) and low voltage master clock systems in commercial buildings.

Communication Systems that transmit or receive information and/or control systems that are intrinsic to the above listed systems; inclusion or exclusion of terminations and testings of conductors determined by their function;

excluding all other data systems or multiple systems which include control function or power supply; excluding installation of raceway systems, conduit systems, line voltage work, and energy management systems. Does not cover work performed at China Lake Naval Ordnance Test Station. Fire alarm work shall be performed at the current inside wireman total cost package.

ELEV0018-001 01/01/2024

Rates Fringes

ELEVATOR MECHANIC................$ 66.63 37.885+a+b

FOOTNOTE:

a. PAID VACATION: Employer contributes 8% of regular hourly rate as vacation pay credit for employees with more than 5 years of service, and 6% for 6 months to 5 years of service.

b. PAID HOLIDAYS: New Year's Day, Memorial Day, Independence Day, Labor Day, Veterans' Day, Thanksgiving Day, Friday after Thanksgiving, and Christmas Day.

ENGI0012-004 08/01/2024

Rates Fringes

OPERATOR: Power Equipment

(DREDGING)

(1) Leverman................$ 64.10 38.75

(2) Dredge dozer............$ 58.13 38.75

(3) Deckmate................$ 58.02 38.75

(4) Winch operator (stern winch on dredge)............$ 57.47 38.75

(5) Fireman-Oiler, Deckhand, Bargeman, Leveehand...................$ 56.93 38.75

(6) Barge Mate..............$ 57.54 38.75

ENGI0012-024 07/01/2023

Rates Fringes

OPERATOR: Power Equipment (All Other Work)

GROUP 1....................$ 53.90 32.80

GROUP 2....................$ 54.68 32.80

GROUP 3....................$ 54.97 32.80

GROUP 4....................$ 56.46 32.80

GROUP 6....................$ 56.68 32.80

GROUP 8....................$ 56.79 32.80

GROUP 10....................$ 56.91 32.80

GROUP 12....................$ 57.08 32.80

GROUP 13....................$ 57.18 32.80

GROUP 14....................$ 57.21 32.80

GROUP 15....................$ 57.29 32.80

GROUP 16....................$ 57.41 32.80

GROUP 17....................$ 57.58 32.80

GROUP 18....................$ 57.68 32.80

GROUP 19....................$ 57.79 32.80

GROUP 20....................$ 57.91 32.80

GROUP 21....................$ 58.08 32.80

GROUP 22....................$ 58.18 32.80

GROUP 23....................$ 58.29 32.80

GROUP 24....................$ 58.41 32.80

GROUP 25....................$ 58.58 32.80

OPERATOR: Power Equipment (Cranes, Piledriving & Hoisting)

GROUP 1....................$ 55.25 32.80

GROUP 2....................$ 56.03 32.80

GROUP 3....................$ 56.32 32.80

GROUP 4....................$ 56.46 32.80

GROUP 5....................$ 56.68 32.80

GROUP 6....................$ 56.79 32.80

GROUP 7....................$ 56.91 32.80

GROUP 8....................$ 57.08 32.80

GROUP 9....................$ 57.25 32.80

GROUP 10....................$ 58.25 32.80

GROUP 11....................$ 59.25 32.80

GROUP 12....................$ 60.25 32.80

GROUP 13....................$ 61.25 32.80

OPERATOR: Power Equipment (Tunnel Work)

GROUP 1....................$ 55.75 32.80

GROUP 2....................$ 56.53 32.80

GROUP 3....................$ 56.82 32.80

GROUP 4....................$ 56.96 32.80

GROUP 5....................$ 57.18 32.80

GROUP 6....................$ 57.29 32.80

GROUP 7....................$ 57.41 32.80

PREMIUM PAY:

$10.00 per hour shall be paid on all Power Equipment Operator work on the followng Military Bases: China Lake Naval Reserve, Vandenberg AFB, Point Arguello, Seely Naval Base, Fort Irwin, Nebo Annex Marine Base, Marine Corp Logistics Base Yermo, Edwards AFB, 29 Palms Marine Base and Camp Pendleton

Workers required to suit up and work in a hazardous material environment: $2.00 per hour additional. Combination mixer and compressor operator on gunite work shall be classified as a concrete mobile mixer operator.

SEE ZONE DEFINITIONS AFTER CLASSIFICATIONS

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Bargeman; Brakeman; Compressor operator; Ditch Witch, with seat or similar type equipment; Elevator operator-inside; Engineer Oiler; Forklift operator (includes loed, lull or similar types under 5 tons;

Generator operator; Generator, pump or compressor plant operator; Pump operator; Signalman; Switchman

GROUP 2: Asphalt-rubber plant operator (nurse tank operator);Coil Tubing Rig Operator, Concrete mixer operator-skip type; Conveyor operator; Fireman; Forklift operator (includes loed, lull or similar types over 5 tons;

Hydrostatic pump operator; oiler crusher (asphalt or concrete plant); Petromat laydown machine; PJU side dum jack; Screening and conveyor machine operator (or similar types); Skiploader (wheel type up to 3/4 yd. without attachment); Tar pot fireman; Temporary heating plant operator; Trenching machine oiler

GROUP 3: Asphalt-rubber blend operator; Bobcat or similar type (Skid steer); Equipment greaser (rack); Ford Ferguson (with dragtype attachments); Helicopter radioman (ground);

Stationary pipe wrapping and cleaning machine operator

GROUP 4: Asphalt plant fireman; Backhoe operator (mini-max or similar type); Boring machine operator; Boxman or mixerman (asphalt or concrete); Chip spreading machine operator;

Concrete cleaning decontamination machine operator;

Concrete Pump Operator (small portable);Direct Push Operator (Geoprobe or similar types) Drilling machine operator, small auger types (Texoma super economatic or similar types - Hughes 100 or 200 or similar types -drilling depth of 30' maximum); Equipment greaser (grease truck); Guard rail post driver operator; Highline cableway signalman; Hydra-hammer-aero stomper; Micro Tunneling (above ground tunnel); Power concrete curing machine operator; Power concrete saw operator; Power-driven jumbo form setter operator; Power sweeper operator; Rock Wheel Saw/Trencher; Roller operator (compacting); Screed operator (asphalt or concrete); Trenching machine operator (up to 6 ft.); Vacuum or much truck

GROUP 6: Articulating material hauler; Asphalt plant engineer; Batch plant operator; Bit sharpener; Concrete joint machine operator (canal and similar type); Concrete planer operator; Dandy digger; Deck engine operator;

Derrickman (oilfield type); Drilling machine operator, bucket or auger types (Calweld 100 bucket or similar types

- Watson 1000 auger or similar types - Texoma 330, 500 or 600 auger or similar types - drilling depth of 45' maximum); Drilling machine operator; Hydrographic seeder machine operator (straw, pulp or seed), Jackson track maintainer, or similar type; Kalamazoo Switch tamper, or similar type; Machine tool operator; Maginnis internal full slab vibrator, Mechanical berm, curb or gutter(concrete or asphalt); Mechanical finisher operator (concrete, Clary-Johnson-Bidwell or similar); Micro tunnel system (below ground); Pavement breaker operator (truck mounted);

Road oil mixing machine operator; Roller operator (asphalt or finish), rubber-tired earth moving equipment (single engine, up to and including 25 yds. struck); Self-propelled tar pipelining machine operator; Skiploader operator (crawler and wheel type, over 3/4 yd. and up to and including 1-1/2 yds.); Slip form pump operator (power driven hydraulic lifting device for concrete forms);

Tractor operator-bulldozer, tamper-scraper (single engine, up to 100 h.p. flywheel and similar types, up to and including D-5 and similar types); Tugger hoist operator (1 drum); Ultra high pressure waterjet cutting tool system operator; Vacuum blasting machine operator

GROUP 8: Asphalt or concrete spreading operator (tamping or finishing); Asphalt paving machine operator (Barber Greene or similar type); Asphalt-rubber distribution operator;

Backhoe operator (up to and including 3/4 yd.), small ford, Case or similar types; Cable Bundling Machine Operator (excluding handheld); Cable Trenching Machine Operator (Spider Plow or similar types) Cast-in-place pipe laying machine operator; Combination mixer and compressor operator (gunite work); Compactor operator (self-propelled);

Concrete mixer operator (paving); Crushing plant operator;

Drill Doctor; Drilling machine operator, Bucket or auger types (Calweld 150 bucket or similar types - Watson 1500, 2000 2500 auger or similar types - Texoma 700, 800 auger or similar types - drilling depth of 60' maximum); Elevating grader operator; Grade checker; Gradall operator; Grouting machine operator; Heavy-duty repairman; Heavy equipment robotics operator; Kalamazoo balliste regulator or similar type; Kolman belt loader and similar type; Le Tourneau blob compactor or similar type; Loader operator (Athey, Euclid, Sierra and similar types); Mobark Chipper or similar; Ozzie padder or similar types; P.C. slot saw; Pneumatic concrete placing machine operator (Hackley-Presswell or similar type); Pumpcrete gun operator; RCM Cementing Unit Operator, Rail/Switch Grinder Operator (Harsco or similar types) Rock Drill or similar types; Rotary drill operator (excluding caisson type); Rubber-tired earth-moving equipment operator (single engine, caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. up to and including 50 cu. yds. struck);

Rubber-tired earth-moving equipment operator (multiple engine up to and including 25 yds. struck); Rubber-tired scraper operator (self-loading paddle wheel type-John Deere, 1040 and similar single unit); Self- propelled curb and gutter machine operator; Shuttle buggy; Skiploader operator (crawler and wheel type over 1-1/2 yds. up to and including 6-1/2 yds.); Soil remediation plant operator;

Surface heaters and planer operator; Tractor compressor drill combination operator; Tractor operator (any type larger than D-5 - 100 flywheel h.p. and over, or similar-bulldozer, tamper, scraper and push tractor single engine); Tractor operator (boom attachments), Traveling pipe wrapping, cleaning and bendng machine operator;

Trenching machine operator (over 6 ft. depth capacity, manufacturer's rating); trenching Machine with Road Miner attachment (over 6 ft depth capacity): Ultra high pressure waterjet cutting tool system mechanic; Water pull (compaction) operator

GROUP 10: Drilling machine operator, Bucket or auger types (Calweld 200 B bucket or similar types-Watson 3000 or 5000 auger or similar types-Texoma 900 auger or similar types-drilling depth of 105' maximum); Dual drum mixer, dynamic compactor LDC350 (or similar types); Monorail locomotive operator (diesel, gas or electric); Motor patrol-blade operator (single engine); Multiple engine tractor operator (Euclid and similar type-except Quad 9 cat.); Rubber-tired earth-moving equipment operator (single engine, over 50 yds. struck); Pneumatic pipe ramming tool and similar types; Prestressed wrapping machine operator;

Rubber-tired earth-moving equipment operator (single engine, over 50 yds. struck); Rubber tired earth moving equipment operator (multiple engine, Euclid, caterpillar and similar over 25 yds. and up to 50 yds. struck), Tower crane repairman; Tractor loader operator (crawler and wheel type over 6-1/2 yds.); Woods mixer operator (and similar Pugmill equipment)

GROUP 12: Auto grader operator; Automatic slip form operator;

Drilling machine operator, bucket or auger types (Calweld, auger 200 CA or similar types - Watson, auger 6000 or similar types - Hughes Super Duty, auger 200 or similar types - drilling depth of 175' maximum); Hoe ram or similar with compressor; Mass excavator operator less tha 750 cu.

yards; Mechanical finishing machine operator; Mobile form traveler operator; Motor patrol operator (multi-engine);

Pipe mobile machine operator; Rubber-tired earth- moving equipment operator (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck); Rubber-tired self- loading scraper operator (paddle-wheel-auger type self-loading - two (2) or more units)

GROUP 13: Rubber-tired earth-moving equipment operator operating equipment with push-pull system (single engine, up to and including 25 yds. struck)

GROUP 14: Canal liner operator; Canal trimmer operator;

Remote- control earth-moving equipment operator (operating a second piece of equipment: $1.00 per hour additional);

Wheel excavator operator (over 750 cu. yds.)

GROUP 15: Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. and up to and including 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine-up to and including 25 yds. struck)

GROUP 16: Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck)

GROUP 17: Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine, Euclid, Caterpillar and similar, over 50 cu. yds. struck);

Tandem tractor operator (operating crawler type tractors in tandem - Quad 9 and similar type)

GROUP 18: Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units -single engine, up to and including 25 yds. struck)

GROUP 19: Rotex concrete belt operator (or similar types);

Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units - single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds.and up to and including 50

cu. yds. struck); Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units - multiple engine, up to and including 25 yds. struck)

GROUP 20: Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units -single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck)

GROUP 21: Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units -multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck)

GROUP 22: Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (single engine, up to and including 25 yds. struck)

GROUP 23: Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. and up to and including 50 yds. struck); Rubber-tired earth-moving equipment operator, operating with the tandem push-pull system (multiple engine, up to and including 25 yds. struck)

GROUP 24: Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds.

struck)

GROUP 25: Concrete pump operator-truck mounted; Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck);

Spyder Excavator Operator, with all attachments

CRANES, PILEDRIVING AND HOISTING EQUIPMENT CLASSIFICATIONS

GROUP 1: Engineer oiler; Fork lift…