Questions & Answers - W31P4Q-20-R-0006.pdf

Solicitation Number W31P4Q-20-R-0006

POP Box Solicitation Questions and Answers:

Question: Are these services being performed by a contractor? If so, can the incumbent name and contract number be provided?

Answer: Yes, Flick Lumber Co., Inc., Contract Number W31P4Q-17-D-0015

Question: Cleats/Skids on bottom of box, are they wood or molded poly urethane?

Answer: Skids are made of wood. Reference drawing 13640074 Revision F, sheet 3 of 4, zone C 2-4 for requirements of the skids.

Question: What are the Cleats/Skids dimensions?

Answer: 3.5” x 3.5” x 11.5”. Reference drawing 13640074 Revision F, sheet 3 of 4, zone C 2-4 for requirements of the skids.

Question: If Cleats/Skids are wood, what kind of wood?

Answer: Pine. Reference drawing 13640074 Revision F, sheet 1 of 4, zone B2, List of Material, find number 4, Skid. ASTM-D-6199 defines the wood type for the skids.

Question: If Cleats/Skids are poly urethane, what is color and density?

Answer: N/A. They are wood.

Question: Please address the following questions regarding the poly urethane parts:

Question: 11.1 x 11.1 x2 – 2 per – ?

Answer: Reference drawing 13640074 Revision F, sheet 1 of 4, List of Materials table, zone B3, find number 5. Quantity is 3.

Question: 6.25 x 23.50 x 1 – QTY?

Answer: Reference drawing 13640074 Revision F, sheet 1 of 4, List of Materials table, zone B3, find number 7. Quantity is 8.

Question: Item #4 shows 11.50 x ? What are the balance of the measurements and how many needed?

Answer: Dimensions of skids are 3.5” x 3.5” x 11.5”. Reference drawing 13640074 Revision F, sheet 3 of 4, zone C 2-4 for requirements of the skids. Reference sheet 1 of 4 zone B3, find number 4, quantity is 3.

Question: What is the poly urethane color and density?

Answer: Reference drawing 13640074 Revision F, sheet 1 of 4, List of Materials table, zone B3, Specification AA 59135.

Question: Are any of the poly urethane pieces glued into the container?

Answer: Reference drawing 13640074 Revision F, sheet 1 of 4, notes 3 and 7, zone D8. The pieces are not glued into the container.

Question: Printing on wood box-stencil or labeled?

Answer: Reference drawing 13640074 Revision F, sheet 1 of 4, note 9, zone C8. The markings are stenciled on the box.

Question: Drawing 13640074 Revision F states in Note 7 that one each of part number 6 is to be placed loosely in each box. What length does this metal strapping need to be?

Answer: Drawing 13640074 Revision F Note 7, Part Number 6 states this is a piece of foam insulation.

Solicitation Number W31P4Q-20-R-0006

The Dimensions are: 23.5" Long X 6.25" Height X 1.00" Thick. In Note 6, the Metal Band Strapping length is not specific. The length of the strapping should be long enough to "PLACE BAND STAPLES AS APPPROPIATE TO PREVENT HORIZONTAL BAND SHIFT." Page 4 of the drawing identifies the banding in zone C2-C3. Enough would be needed to go around the box three each time on the short side and 2 each times on the long side as shown.