Attachment 0004 - Mass Simulant Requirements Drawing 13758029, 10 DEC 2019.pdf

APPROVEDDATEDESCRIPTIONREV.USED ONNEXT ASSEMBLY

REVISION HISTORYAPPLICATION

.XX .05

.XXX .010

US. ARMY

AVIATION AND MISSILE COMMAND

REDSTONE ARSENAL, ALABAMA 35898

SHEET 1 OF 1SCALE 3

REV.DRAWING NO.SIZE CAGE CODE

A 18876

TITLE

DATE

SUBMITTED

PREPARED

CHECKED

ENGINEER

ANGLE

UNLESS OTHERWISE SPECIFIED

DIMENISIONS ARE IN INCHES.

TOLERANCES ON

FRACTIONS DECIMALS

APPROVED BY ORDER OF

COMMANDER USA AMCOM

MATERIAL

- INITIAL RELEASE: MI-R6847 12/10/19

-13758029

SEE NOTE 7

12/10/19

MASS SIMULANT REQUIREMENTS

NOTES:

FIGURE 1: U3D IMBEDDED MODEL REPRESENTATION

1. CENTER OF GRAVITY (CG) MUST BE 37.50 INCHES ±0.25 FROM THE LEFT MOST SURFACE IN FIGURE 2 AND IN LINE WITH THE AXIS OF

SYMMETRY

FIGURE 2: PRIMARY 3D MODEL DIMENSIONS

2. MASS SIMULANT MUST WEIGH 377 POUNDS ±1

3. IF APPLICABLE, BREAK ALL SHARP EDGES

4. USE FIGURE 2 FOR CRITICAL DIMENSIONS

5. MUST BE ABLE TO WITHSTAND POP BOX DROP TESTING WITHOUT SUSTAINING MAJOR DAMAGE IN RELATIONSHIP TO THE ABOVE

REPRESENTATIONS AND NOTE 1’S CG

6. MASS SIMULANTS EXTERNAL FEATURES MUST COINCIDE WITH THE ABOVE REPRESENTATIONS

7. THIS DRAWING IS A REQUIREMENTS DRAWING, END ITEM MUST MEET ALL REQUIREMENTS IN THIS DOCUMENT, MATERIAL(S)

WILL DEPEND ON CONTRACTOR DESIGN

DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.