DI-MISC-81397B.pdf

DATA ITEM DESCRIPTION

Title: HAZARDOUS MATERIALS MANAGEMENT PROGRAM (HMMP) REPORT USING

NAS 411

Number: DI-MISC-81397B Approved Date: 20110930 AMSC Number: F9242 Limitation: N/A DTIC Applicable: Yes GIDEP Applicable: Yes DTIC Midwestern Regional Office GIDEP Operations Center ATTN: DTIC-BPD, Rm. 103 Naval Warfare Assessment Center 2245 Monahan Way, Bldg 29 P.O. Box 8000 Wright-Patterson AFB OH 45433-7022 Corona CA 91718-8000

Office of Primary Responsibility: 11 Applicable Forms: N/A

Use/Relationship: The Hazardous Materials Management Program (HMMP) Report will be used to document the results of contractor’s efforts to eliminate or reduce the use of hazardous materials in the system, system component or support item being acquired.

a. This data will be used to reduce hazard risk and life cycle ESOH costs. The data will also enable compliance with the requirements of relevant laws and presidential executive orders, including the National Environmental Policy Act, and the regulations that implement those laws and orders.

b. This DID contains the format, content, and intended use information for the data resulting from the work task described in paragraph 4.4, including subparagraphs 4.4.1 through 4.4.3, of Aerospace Industries Association/National Aerospace Standard (NAS) 411.

1) The HMMP Report shall address hazardous materials imbedded in the system, produced by the system, and used or created by operation and maintenance of the system.

2) The basis for priority determination (NAS 411, paragraph 4.4.2) shall be the MIL-STD- 882 risk level determination for each material hazard.

3) The report shall additionally describe the reasonably anticipated hazardous waste(s) generated during normal O&M and emergency situations.

c. When hexavalent chromium (Cr6+) use is planned, the HMMP Report will address the following topics:

1) Cost effectiveness of alternative materials or processes over weapon life cycle.

2) Technical feasibility of alternative materials or processes.

3) Risks associated with the use of the Cr6+ or substitute materials in each specific application (use MIL-STD-882 system safety process).

4) Achieving a Manufacturing Readiness Level of at least 8 for any qualified alternative.

5) Material availability of Cr6+ and the proposed alternative over the projected life cycle of the system.

6) Corrosion performance difference of alternative materials processes compared with Cr6+.

Source: http://www.assistdocs.com -- Downloaded: 2014-04-18T17:59Z Check the source to verify that this is the current version before use.

d. The Report shall document risk mitigations including 1) special hazardous material training, handling, and storage requirements and 2) safe hazardous material requirements for demilitarization and disposal.

e. DI-MISC-81397B supersedes DI-MISC-81397A. It is intended for use by system acquisition Program Offices responsible for modifying systems where NAS 411 was used previously.

Requirements:

1. Reference documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2. Format. The HMMP Report shall be in the contractor’s format.

3. Content. The HMMP Report shall include the information required by paragraph 4.4 of NAS 411, including all subparagraphs, identify the hazardous materials and wastes created by operation and maintenance of the system and identify Cr6+ and material substitute data.

4. End of DI-MISC 81397B.

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

Source: http://www.assistdocs.com -- Downloaded: 2014-04-18T17:59Z Check the source to verify that this is the current version before use.