22R0040 Attachment III - Water Jet RFIs.docx
DOCX document 19 KB Posted
- Attached to
- Water Jet Metal Cutter 60, 000 PSI
- Solicitation number
- W25G1V-22R0040
About this file
This document contains questions and answers regarding an existing water jet system and software. The existing system located less than one mile from its current location is to be removed and disposed of by the contractor, with the tank drained and residue removed by the government. The current version of SigmaNEST CAM software in use is X1.4SP0 (64-Bit).
The federal contract opportunity is for a water jet metal cutting machine with 60,000 PSI capabilities. The statement of work in the solicitation provides details for a turn-key design, supply, delivery, off-loading, transporting, locating, proper installation, cleaning, assembly, setup and training for one computer numerical controlled water jet cutting machine. The contracting agency is the Department of the Army Materiel Command Army Contracting Command located at Aberdeen Proving Ground.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 22R0040 Amendment 0005.pdf | ||
| 22R0040 Amendment 0004.pdf | ||
| 22R0040 Amendment 0003.pdf | ||
| 22R0040 Attachment II - IT Vendor Info for Water Jet.docx | DOCX document | |
| 22R0040 Amendment 0002.pdf | ||
| 22R0040 Attachment I - SOW for Water Jet.docx | DOCX document | |
| 22R0040 Amendment 0001.pdf | ||
| 22R0040 Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Water Jet RFI’s
Question #1 Is existing system to be removed for disposal? How far from the original location will the existing system need to be transported? Confirm that the tank of the existing waterjet will be emptied?
Answer: Existing system to be removed for disposal. Transport distance less than one mile on depot roadways. Tank will be drained and residue removed by the Government.
Question #2 What is the current version of SigmaNEST CAM software being used?
Answer: SigmaNEST X1.4SP0 (64-Bit)
File details come from the government source that posted it. Updated .