QtAs (Rev. 1) - W15QKN-24-R-5017.docx

Questions & Answers

W15QKN-24-R-5017

March 5, 2024 Revised: March 11, 2024

CSS 92935

Q1: Can you please let us know the Wage rate of Tree cutting laborer/Landscaper ?

A1: All Wage Rates are within the applicable Wage Determinations. Wage Determinations are the three (3) attachments starting with the title “DBA…”.

Q2: Can you please let us know the height of the black vinyl coated fabric to install of 135ft ?

A2: The fence is 6 feet tall with a 1 foot barbed wire topper. Fence fabric is only to be replaced if damaged during tree removal. 9 gauge vinyl coated wire tires are required along the entire fence line, at rails and posts, not replacing fabric.

Q3: Can you please send us the picture for Overhead doors and Door C & D?

A3: This exhibit is already attached to the Solicitation, entitled “ME001 DOOR PLAN”.

CSS 94632

Q4: Are they ¼” steel guides or ½” guides?

A5: ¼” steel.

Q5: Will the seals be required on the inside or outside or both?

A5: Outside.

Q6: Is there an aluminum retainer needed for the seals or all in one standard seal?

A6: Standard all in one.

Q7: Is it a brush seal or rubber flap and what color.

A7: Brush seal (black)

Q8: Is the bottom just a bulb rubber or is it a sensing edge or pneumatic edge?

A8: They are pneumatic sensing edges for safety.

Q9: On page 5 of the solicitation, paragraph (e), It states, “Bid Guarantee IAW FAR 52.228-1, must be submitted with your proposal submission to be eligible for award. Failure to provide a bid guarantee will render your proposal unacceptable.”

How do you want the bid bonds for the 3 separate tasks. Do you want a bid guarantee for each individual task or all three added together?

A9: Please provide separate bonds for each individual project.

Q10: I didn't see a wage rate for NH in the solicitation or did I miss it.

A10: The Wage Determination for New Hampshire is attached to the Solicitation, entitled “DBA NH20240020 (Mod. 0) 1-5-2024”.

Q11: 11.3.9 Can you list how many oil product and how many DEX product you want in Aubrun. And the color for each product.

A11: 11.3.9 Auburn has 3 types of oil 80-90/15-40/ATF.

Q12: 11.4.3 At the site visit, Jm Reddy stated that door #7 was damaged also and needed to be replaced. Are you ging to add this door to the soliciation.

A12: 11.4.3. Door numbers were listed in the SOW. There are 5 doors being addressed in the SOW, no additional doors.

Q13: 11.4.6 It says to demp these hose reels but dosent have them being replaced in the INSTALL AND SERVICE part. Also can you list the number of oil and DEX products dispensers that are needed of each product. The color for each would also help. do you want the color on the dispenser like they are now?

A13: 11.4.6. The following is listed in the Install and Service section 11.3.9 All reels will be HD Premuim series with dual support arms and provide 60’ of dispense hose. The oil products will have an electronic preset meter with a rigid outlet. The DEX product reels will have a mechanical meter with a flex outlet nozzle. Included will be two sets of the colored shrouds to further identify the meter/product. The product is 80-90/15-40/ATF. It’s up to the RFOS on the color.

Q14: At the site visit in NH, He stated that the new doors were to be power coated in desert sand color. Is this correct or is there a different color that you prefer?

A14: Door color will be chosen by the RFOS. It should match the remaining doors.