W15QKN22R0036 RFP.pdf

SOLICITATION, OFFER AND AWARD 1. This Contract Is A Rated Order Under

DPAS (15 CFR 700)

Rating Page of Pages

2. Contract Number 3. Solicitation Number 4. Type of Solicitation 5. Date Issued 6. Requisition/Purchase Number Sealed Bid (IFB)

Negotiated (RFP)

7. Issued By Code 8. Address Offer To (If Other Than Item 7)

NOTE: In sealed bid solicitations ‘offer’ and ‘offeror’ mean ‘bid’ and ‘bidder’.

SOLICITATION

9. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in item 8, or if handcarried, in the depository located in until (hour) local time (Date).

Caution - Late Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. For Information A. Name B. Telephone (No Collect Calls) C. E-mail Address

Call: Area Code Number Ext.

11. Table Of Contents

(X) Sec. Description Page(s) (X) Sec. Description Page(s)

Part I - The Schedule Part II - Contract Clauses A Solicitation/Contract Form I Contract Clauses

B Supplies or Services and Prices/Costs Part III - List Of Documents, Exhibits, And Other Attach.

C Description/Specs./Work Statement J List of Attachments D Packaging and Marking Part IV - Representations And Instructions E Inspection and Acceptance K Representations, Certifications, and F Deliveries or Performance Other Statements of Offerors G Contract Administration Data L Instrs., Conds., and Notices to Offerors H Special Contract Requirements M Evaluation Factors for Award

OFFER (Must be fully completed by offeror) NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

12. In compliance with the above, the undersigned agrees, if this offer is accepted within _____ calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. Discount For Prompt Payment 10 Calendar Days (%) 20 Calendar Days (%) 30 Calendar Days (%) Calendar Days (%) (See Section I, Clause No. 52.232-8)

14. Acknowledgment of Amendments (The offeror acknowledges Amendment No. Date Amendment No. Date receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

15A. Name and Code Facility 16. Name and Title of Person Authorized to Sign Offer Address of (Type or Print) Offeror

15B. Telephone Number 15C. Check if Remittance Address is 17. Signature 18. Offer Date Area Code Number Ext. Different From Above – Enter such

Address In Schedule

AWARD (To be completed by Government)

19. Accepted As To Items Numbered 20. Amount 21. Accounting And Appropriation

22. Authority For Using Other Than Full And Open Competition: 23. Submit Invoices To Address Shown In Item

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

24. Administered By (If other than Item 7) Code 25. Payment Will Be Made By Code

26. Name of Contracting Officer (Type or Print) 27. United States Of America 28. Award Date

(Signature of Contracting Officer)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION Standard Form 33 (Rev. 9-97) Previous edition is unusable Prescribed By GSA-FAR (48 CFR) 53.214(c)

W15QKN-22-R-0036

X

2022APR12

2022MAY1204:00pm

DOA6

2022APR12 SEE SCHEDULE

W15QKN

ARMY CONTRACTING COMMAND - NJ

PICATINNY ARSENAL, NJ 07806-5000

LAUREN MALINSKI

(973)724-9622

CCNJ-MC

LAUREN.M.MALINSKI.CIV@ARMY.MIL

1 92

X 1

X 5 X 16

X 28 X 32 X 33

X 34

X 37

X 40

X 58

X 59

X 70

X 83

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: LAUREN MALINSKI

Buyer Office Symbol/Telephone Number: CCNJ-MC/(973)724-9622

Type of Contract 1: Firm Fixed Price

Type of Contract 2: Cost Plus Fixed Fee

Kind of Contract: Service Contracts

*** End of Narrative A0000 ***

EXECUTIVE SUMMARY_________________

BACKGROUND:

The United States Army Contracting Command - New Jersey (CCNJ), on behalf of the Project Manager for Manuever Ammunition Systems (PM-

MAS), hereby issues a Request for Proposal (RFP) for Small Caliber Non-Recurring Engineering (NRE). The purpose of the proposed requirement is to acquire the following: test assets, engineering/technical support, studies and analysis, manufacturing production and process capability and capacity assessments, product and process design development, equipment, components, testing, training aides, fabrication and qualification of production representative products, and prove-out of manufacturing and inspection processes for new or existing small caliber munitions systems, testing/development equipment, failure analysis studies, and prove-out production items for the development and improvement of new or existing small caliber ammunition systems to include but not limited to 5.56mm, 7.62mm, Caliber .50, 9mm, 6.8mm and sniper ammunition.

COMPETITION APPROACH:_____________________

It is the Government's intention to award up to two Firm-Fixed Price (FFP)/Cost Plus Fixed Fee (CPFF), Indefinite Delivery/Indefinite

Quantity (IDIQ) contract(s) with five one-year ordering periods. The minimum guarantee for each contract is $100,000.00 with a Not-To-

Exceed (NTE) ceiling value of $25,000,000.00. The total, combined programatic ceiling of all awarded contracts will be $25,000,000.00

The delivery and performance period requirements will vary and be dependent on each individual task/delivery order requirements. The period of performance will be identified and called out within each task/delivery order RFP, competed amongst the awardees, and negotiated before execution of the resultant task/delivery order.

The Government anticipates that multiple Best Value awards will be made based on an integrated assessment of the factors/subfactors and their relative order of importance; however, the Government reserves the right to make a single award if it is determined to be the most advantageous to the Government. The Best Value approach allows award to the Offeror(s) whose proposal is the most advantageous to the

Government when considering factors in addition to price. These factors will include Technical, Price/Cost, Past Performance, and Small

Business Participation. For more information regarding proposal submission or the source selection evaluation factors, see Sections L and M of this solicitation.

Each Ordering Period (OP) of the resultant contract(s) shall be 12 months from the date of award. For example, with an estimated award date of 10 November 2022, the OPs would be as follows:

Ordering Period 1: 10 November 2022 to 9 November 2023

Ordering Period 2: 10 November 2023 to 9 November 2024

Ordering Period 3: 10 November 2024 to 9 November 2025

Ordering Period 4: 10 November 2025 to 9 November 2026

Ordering Period 5: 10 November 2026 to 9 November 2027

Orders will be placed using the applicable FFP and/or CPFF loaded labor rates for the OP during which the orders are issued regardless of when performance takes place. For instance, if an FFP and/or CPFF order is issued on the first day of OP2, then the applicable FFP and/or CPFF loaded labor rates for OP2 will be applicable; if an FFP and/or CPFF order is placed on the last day of OP2, then the applicable FFP and/or CPFF loaded labor rates for OP2 will still be applicable.

MINIMUM/MAXIMUM CONTRACT VALUE:_______________________________

MINIMUM AMOUNT MAXIMUM AMOUNT

$100,000.00 $25,000,000.00

PRICE MATRIX:

The Offeror shall fill in the Price Matrix, Attachment A0006, found in Section J of this solicitation.

2 92

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

See Sections B and H for further information, fill-ins and instructions.

GENERAL INFORMATION TO OFFERORS OR QUOTERS:___________________________________________

1. Responses must set forth full, accurate and complete information as required by this solicitation (including attachments). Fill-ins are provided on Standard Form 33, and other solicitation documents. Examine the entire solicitation carefully. The penalty for making false statements is prescribed in 18 U.S.C. 1001.

2. Responses must be plainly marked with the Solicitation Number and the date and local time set forth for bid opening or receipt of proposals in the solicitation document.

3. Information regarding the timeliness of response is addressed in the provision of the solicitation entitled either Late Submission, Modification and Withdrawal of Bid or Instructions to Offerors Competitive Acquisitions.

4. Procurement Information:

This procurement is being solicited using Other Than Full and Open Competition in accordance with Title 10 U.S.C. 2304(c)(3) as implemented by FAR 6.302-3(a)(2)(i).

5. Issuing Office:

U.S. Army Contracting Command - New Jersey

ATTN: Mariah L. Hanko

Title: Contracting Officer

Office Symbol: CCNJ-MC

Picatinny Arsenal, NJ 07806-5000

Email: mariah.l.hanko.civ@army.mil

6. All completed forms and requests shall be submitted to:

U.S. Army Contracting Command - New Jersey

ATTN: Lauren M. Malinski

Title: Contract Specialist

Email: lauren.m.malinski.civ@army.mil

Phone: (973) 724-9622

LIMITED DISTRIBUTION DATA INFORMATION INSTRUCTIONS:___________________________________________________

Note: The highest Distribution Level for this procurement is Distribution D.

DISTRIBUTION D: Distribution authorized to U.S. Department of Defense and U.S. DoD Contractors only to protect critical technology from public disclosure, as determined 16 September 2014.

All TDPs and Performance Specifications are Distribution D and export controlled and will be managed as such. To obtain these documents, Offerors are required to submit an AMSTA-AR 1350 Technical Data Request Questionnaire, a DD 2345 Military Critical Technical Data

Agreement, and a fully executed Non-Disclosure and Non-Use Agreement all of which are included as attachments to this solicitation. The

Handling/Destroying of Unclassified/Limited Distribution documents shall be handled using the same standard as "For Official Use Only

(FOUO)" material, and shall be destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

EXPORT CONTROL WARNING:_______________________

This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et. seq.)

or the Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et. seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of the DoD Directive 5230.25.

DESTRUCTION NOTICE:___________________

For Unclassified, Distribution Limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

DISCLOSURE OF UNIT PRICE INFORMATION:_____________________________________

3 92

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

This constitutes notification pursuant to Executive Order 12600, Pre-Disclosure Notification Procedures for Confidential Commercial

Information (June 23, 1987), of our intention to release unit prices in response to any request under the Freedom of Information Act, 5

USC 552. Unit price is defined as the contract price per unit or item purchased. We consider any objection to be waived unless the contracting officer is notified of your objection to such posting prior to submission of initial proposals.

IDENTIFICATION OF WORK PERFORMED AT A GOVERNMENT LOCATION:__________________________________________________________

1. Offerors shall specify the place(s) of performance of work in their proposal.

2. Where the place(s) of performance includes, in whole or part, a Government location, installation, facility, office space, etc. the offeror will:

a. Specify which work will be performed at a Government location and which will be performed at a contractor location.

b. Identify any Government locations, buildings, room numbers, areas etc. where that part of the work will be performed.

c. If a government location is provided under another contract, specify the contract number, PCO, COR or other Government point of contact, etc.

d. If any offeror personnel currently have access to a Government electronic mail account or have in their possession a

Government identification badge, specify all such persons, badge numbers, e-mail accounts, etc.

e. Specify any Government furnished equipment needed to perform the work under this solicitation such as office space, other space, utilities, physical access, e-mail accounts, and the like on which the proposal is based.

f. Separate in the proposal any differing overhead, G&A and other applicable cost or pricing information applicable to the work to be performed at a government location vs. contractor location.

g. If applicable, furnish a copy of any prior or current agreement for the use of such Government location(s).

DELIVERIES TO PICATINNY ARSENAL:

Trucks shall deliver Monday through Thursday, excluding holidays, between the hours of 7:30 A.M. and 2:00 P.M. Enter through the truck entrance and report to the Scale House for further assistance.

Schedule shipments with Combat Capabilities Development Command (CCDC) receiving personnel before delivery at telephone number (973) 724-

4243, 3384 or 2503. Failure to schedule delivery could result in delay of off-loading. If you cannot deliver by the contract/purchase order delivery date, you will notify the Contract Specialist cited on DD Form 1155, SF33 or SF18 for disposition instructions.

SECTION 806 DETERMINATION:__________________________

In accordance with Section 806, Procurement of Conventional Ammunition, of the Strom Thurmond National Defense Authorization Act for

Fiscal Year 1999, I certify the Single Manager for Conventional Ammunition has analyzed this conventional ammunition procurement action.

The planned procurement of Small Caliber Ammunition Systems Design, Manufacture and Non-Recurring Engineering is consistent with retaining the National Technology and Industrial Base (NTIB) in accordance with Section 806, Public Law 105-261. As such, the procurement approach is Full and Open Competition.

*** END OF NARRATIVE A0001 ***

4 92

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

LABOR CATEGORY DESCRIPTIONS___________________________

A. SCIENTIST/PROGRAM MANAGER:

Organizes, directs, and coordinates planning and implementation of all contract support activities. Interface with government personnel.

Formulate and review project feasibility studies, determine costs, ensure conformance to work standards. Interpret policies, purposes, and goals of the organizations for subordinates. Manage logistics support analysis for military systems. Manage systems safety studies.

Identify, acquire and utilize company resources to achieve project technical objectives.

B. SENIOR ENGINEER:

Performs a variety of engineering tasks, either independently or under supervision, which are broad in nature and are concerned with the design and implementation, including personnel, hardware, software and support facilities and/or equipment. Performs with latitude for un-reviewed actions and decisions. Must be capable of system conceptualization, system level requirements definition and system test and evaluation. Must be familiar with probability, reliability, statistical analysis methods, sampling and test and evaluation techniques, data collection and applicable regulations and standards.

C. GENERAL ENGINEER:

Under supervision performs a variety of engineering tasks, which are broad in nature and are concerned with the design and implementation, including personnel, hardware, software and support facilities and/or equipment. Performs with some latitude for unreviewed actions and decisions. Must be capable of system conceptualization, system level requirements definition and system test and evaluation. Must be familiar with probability, reliability, statistical analysis methods, sampling and test and evaluation techniques, data collection and applicable regulations and standards.

D. QUALITY CONTROL ENGINEER:

Has experience in probability, reliability, maintainability, statistical analysis methods, sampling and test and evaluation techniques, data collection and familiarity with applicable regulations and standards. Experience in the areas of development and operational testing at both component and system level; preparation, review and analysis of failure reports, verification of corrective actions;

requirement validation and their translation and trace to technical requirements and test specifications; and preparation and review of detailed test plans/procedures/reports.

E. ENGINEERING TECHNICIAN:

Provides highly technical expertise and skills in development and repair of prototype hardware, use of numerical control machines, and knowledge of shop practices, etc. Performs in all phases of hardware manufacturing process. Develop standards, procedures, and guidelines for tasks being performed. Perform in all phases of hardware testing, recording of test data, pointing out deviations resulting from equipment malfunction or observational errors. Participate in hardware evaluations. Develop test procedures and report test results.

F. DRAFTSMAN:

Prepares mechanical and electronic drawings, as well as, technical illustrations, assembly drawings, schematics, facility layouts, wiring diagrams and wire lists. Develops documentation of design from concept to completion.

G. MANUFACTURING:

Experience should include basic manufacturing planning, understanding of military specifications and certifications, raw material selection, engineering change process, design modification, use of CAD/CAM systems and manufacturing process development. Must be able to set-up and operate the full range of machine tools found in a well-equipped prototype development shop. Must be able to work from engineering design drawings and technical specifications. Must be able to maintain dimensional accuracy, to + or - 0.0001", during machining processes, through the use of measuring instruments (e.g. vernier calipers, inside/outside & depth micrometers, gage blocks, surface and height gages, and dial indicators).

H. INSPECTION & TESTING:

Must have experience and skills in outlining, setting up, and operating test equipment that will meet specification requirements.

Perform in all phases of hardware testing, recording of test data, pointing out deviations resulting from equipment malfunction or observational errors. Participate in hardware evaluations. Develop test procedures and report test results.

I. QUALITY CONTROL TECHNICIAN:

Knowledge should include a basic understanding of and familiarity with Military and DoD quality standards. Specific experience may

5 92

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

include: Destructive and/or non destructive testing; Collection of quality metrics; Execution of quality plans; prepare and execute quality related tests, collect data, repair appropriate reports; Assist in the conduct of subcontractor Source Inspections.

J. PRODUCTION CONTROL:

Plan, direct, or coordinate the work activities and resources necessary for manufacturing products for prototypes and low rate production in accordance with cost, quality, and quantity specifications.

K. TOOL/DIE/MODEL MAKER:

Must be able to fabricate and construct mechanisms, models and instruments that fulfill engineering requirements for equipment involving mechanical, electro-mechanical, hydraulic, optical and pneumatic principles. Determine necessity for special tools, dies and fixtures required to accomplish intricate machining and assembly operations and set-up and operate CNC machines (Machining Center, Lathe and Milling Machine).

L. CLERICAL/ADMINISTRATIVE:

Provides administrative-type support to technical and management-level personnel. This includes, but is not limited to, documentation planning and support, project administration, general office support, executive secretarial support, human resource planning, event planning and administration, office relocation planning, mail services, records, data input, etc.

*** END OF NARRATIVE B0001 ***

6 92

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0001 OP1 SMALL CALIBER NRE FFP REQUIREMENTS $ $ ______________________________________ ______________ __________________

COMMODITY NAME: OP1 SMALL CALIBER NRE FFP REQ

CLIN CONTRACT TYPE:

Firm Fixed Price

This CLIN is established to provide Firm Fixed Price

Requirements for Ordering Period 1 in accordance with the Statement of Work (SOW), set forth in Section C of this solicitation, Section F and Section H of this solicitation, and all other terms and conditions of this solicitation. Ordernig Period 1 is for one year, commencing at contract award.

Specific requirements and pricing will be set forth in each individual order.

The Delivery and/or Performance Schedule will be determined on an order-by-order basis.

Inspection, Acceptance, and Freight on Board (FOB)

Point will be specified in each individual order.

The specific tasks placed under this contract will be determined based on the availability of funds, Government program needs and scheduling. NOTE: For

Proposal purposes only, CLIN pricing is not required in Section B of this solicitation.

(End of narrative B001)

Packaging and Marking _____________________

Deliveries or Performance _________________________

FOB POINT:

SHIP TO:

(Y00000) SHIPPING INSTRUCTIONS FOR CONSIGNEE

(SHIP-TO) WILL BE FURNISHED PRIOR

TO THE SCHEDULED DELIVERY DATE FOR

ITEMS REQUIRED UNDER THIS

REQUISITION.

0002 OP1 SMALL CALIBER NRE CPFF REQUIREMENTS $ _______________________________________ __________________

SERVICE REQUESTED: OP1 SMALL CALIBER NRE CPFF

CLIN CONTRACT TYPE:

Cost Plus Fixed Fee

7 92

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

This CLIN is established to provide Cost Plus Fixed

Fee Requirements for Ordering Period 1 in accordance with the Statement of Work (SOW), set forth in

Section C of this solicitation, Section F and Section

H of this solicitation, and all other terms and conditions of this solicitation. Ordernig Period 1 is for one year, commencing at contract award.

Specific requirements and pricing will be set forth in each individual order.

The Delivery and/or Performance Schedule will be determined on an order-by-order basis.

Inspection, Acceptance, and Freight on Board (FOB)

Point will be specified in each individual order.

The specific tasks placed under this contract will be determined based on the availability of funds, Government program needs and scheduling. NOTE: For

Proposal purposes only, CLIN pricing is not required in Section B of this solicitation.

(End of narrative B001)

Deliveries or Performance _________________________

0003 OP2 SMALL CALIBER NRE FFP REQUIREMENTS $ $ ______________________________________ ______________ __________________

COMMODITY NAME: OP2 SMALL CALIBER NRE FFP

CLIN CONTRACT TYPE:

Firm Fixed Price

This CLIN is established to provide Firm Fixed Price

Requirements for Ordering Period 2 in accordance with the Statement of Work (SOW), set forth in Section C of this solicitation, Section F and Section H of this solicitation, and all other terms and conditions of this solicitation. Ordernig Period 2 is for one year, commencing at contract award.

Specific requirements and pricing will be set forth in each individual order.

The Delivery and/or Performance Schedule will be determined on an order-by-order basis.

Inspection, Acceptance, and Freight on Board (FOB)

Point will be specified in each individual order.

8 92

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

The specific tasks placed under this contract will be determined based on the availability of funds, Government program needs and scheduling. NOTE: For

Proposal purposes only, CLIN pricing is not required in Section B of this solicitation.

(End of narrative B001)

Packaging and Marking _____________________

Deliveries or Performance _________________________

FOB POINT:

SHIP TO:

(Y00000) SHIPPING INSTRUCTIONS FOR CONSIGNEE

(SHIP-TO) WILL BE FURNISHED PRIOR

TO THE SCHEDULED DELIVERY DATE FOR

ITEMS REQUIRED UNDER THIS

REQUISITION.

0004 OP2 SMALL CALIBER NRE CPFF REQUIREMENTS $ _______________________________________ __________________

SERVICE REQUESTED: OP2 SMALL CALIBER NRE CPFF

CLIN CONTRACT TYPE:

Cost Plus Fixed Fee

This CLIN is established to provide Cost Plus Fixed

Fee Requirements for Ordering Period 2 in accordance with the Statement of Work (SOW), set forth in

Section C of this solicitation, Section F and Section

H of this solicitation, and all other terms and conditions of this solicitation. Ordernig Period 2 is for one year, commencing at contract award.

Specific requirements and pricing will be set forth in each individual order.

The Delivery and/or Performance Schedule will be determined on an order-by-order basis.

Inspection, Acceptance, and Freight on Board (FOB)

Point will be specified in each individual order.

The specific tasks placed under this contract will be determined based on the availability of funds, Government program needs and scheduling. NOTE: For

Proposal purposes only, CLIN pricing is not required in Section B of this solicitation.

(End of narrative B001)

9 92

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Deliveries or Performance _________________________

0005 OP3 SMALL CALIBER NRE FFP REQUIREMENTS $ $ ______________________________________ ______________ __________________

COMMODITY NAME: OP3 SMALL CALIBER NRE FFP

CLIN CONTRACT TYPE:

Firm Fixed Price

This CLIN is established to provide Firm Fixed Price

Requirements for Ordering Period 3 in accordance with the Statement of Work (SOW), set forth in Section C of this solicitation, Section F and Section H of this solicitation, and all other terms and conditions of this solicitation. Ordernig Period 3 is for one year, commencing at contract award.

Specific requirements and pricing will be set forth in each individual order.

The Delivery and/or Performance Schedule will be determined on an order-by-order basis.

Inspection, Acceptance, and Freight on Board (FOB)

Point will be specified in each individual order.

The specific tasks placed under this contract will be determined based on the availability of funds, Government program needs and scheduling. NOTE: For

Proposal purposes only, CLIN pricing is not required in Section B of this solicitation.

(End of narrative B001)

Packaging and Marking _____________________

Deliveries or Performance _________________________

FOB POINT:

SHIP TO:

(Y00000) SHIPPING INSTRUCTIONS FOR CONSIGNEE

(SHIP-TO) WILL BE FURNISHED PRIOR

TO THE SCHEDULED DELIVERY DATE FOR

ITEMS REQUIRED UNDER THIS

REQUISITION.

0006 OP3 SMALL CALIBER NRE CPFF REQUIREMENTS $ _______________________________________ __________________

10 92

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SERVICE REQUESTED: OP3 SMALL CALIBER NRE CPFF

CLIN CONTRACT TYPE:

Cost Plus Fixed Fee

This CLIN is established to provide Cost Plus Fixed

Fee Requirements for Ordering Period 3 in accordance with the Statement of Work (SOW), set forth in

Section C of this solicitation, Section F and Section

H of this solicitation, and all other terms and conditions of this solicitation. Ordernig Period 3 is for one year, commencing at contract award.

Specific requirements and pricing will be set forth in each individual order.

The Delivery and/or Performance Schedule will be determined on an order-by-order basis.

Inspection, Acceptance, and Freight on Board (FOB)

Point will be specified in each individual order.

The specific tasks placed under this contract will be determined based on the availability of funds, Government program needs and scheduling. NOTE: For

Proposal purposes only, CLIN pricing is not required in Section B of this solicitation.

(End of narrative B001)

Deliveries or Performance _________________________

0007 OP4 SMALL CALIBER NRE FFP REQUIREMENTS $ $ ______________________________________ ______________ __________________

COMMODITY NAME: OP4 SMALL CALIBER NRE FFP

CLIN CONTRACT TYPE:

Firm Fixed Price

This CLIN is established to provide Firm Fixed Price

Requirements for Ordering Period 4 in accordance with the Statement of Work (SOW), set forth in Section C of this solicitation, Section F and Section H of this solicitation, and all other terms and conditions of this solicitation. Ordernig Period 4 is for one year, commencing at contract award.

Specific requirements and pricing will be set forth in each individual order.

The Delivery and/or Performance Schedule will be

11 92

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

determined on an order-by-order basis.

Inspection, Acceptance, and Freight on Board (FOB)

Point will be specified in each individual order.

The specific tasks placed under this contract will be determined based on the availability of funds, Government program needs and scheduling. NOTE: For

Proposal purposes only, CLIN pricing is not required in Section B of this solicitation.

(End of narrative B001)

Packaging and Marking _____________________

Deliveries or Performance _________________________

FOB POINT:

SHIP TO:

(Y00000) SHIPPING INSTRUCTIONS FOR CONSIGNEE

(SHIP-TO) WILL BE FURNISHED PRIOR

TO THE SCHEDULED DELIVERY DATE FOR

ITEMS REQUIRED UNDER THIS

REQUISITION.

0008 OP4 SMALL CALIBER NRE CPFF REQUIREMENTS $ _______________________________________ __________________

SERVICE REQUESTED: OP4 SMALL CALIBER NRE CPFF

CLIN CONTRACT TYPE:

Cost Plus Fixed Fee

This CLIN is established to provide Cost Plus Fixed

Fee Requirements for Ordering Period 4 in accordance with the Statement of Work (SOW), set forth in

Section C of this solicitation, Section F and Section

H of this solicitation, and all other terms and conditions of this solicitation. Ordernig Period 4 is for one year, commencing at contract award.

Specific requirements and pricing will be set forth in each individual order.

The Delivery and/or Performance Schedule will be determined on an order-by-order basis.

Inspection, Acceptance, and Freight on Board (FOB)

Point will be specified in each individual order.

The specific tasks placed under this contract will be determined based on the availability of funds, Government program needs and scheduling. NOTE: For

12 92

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Proposal purposes only, CLIN pricing is not required in Section B of this solicitation.

(End of narrative B001)

Deliveries or Performance _________________________

0009 OP5 SMALL CALIBER NRE FFP REQUIREMENTS $ $ ______________________________________ ______________ __________________

COMMODITY NAME: OP5 SMALL CALIBER NRE FFP

CLIN CONTRACT TYPE:

Firm Fixed Price

This CLIN is established to provide Firm Fixed Price

Requirements for Ordering Period 5 in accordance with the Statement of Work (SOW), set forth in Section C of this solicitation, Section F and Section H of this solicitation, and all other terms and conditions of this solicitation. Ordernig Period 5 is for one year, commencing at contract award.

Specific requirements and pricing will be set forth in each individual order.

The Delivery and/or Performance Schedule will be determined on an order-by-order basis.

Inspection, Acceptance, and Freight on Board (FOB)

Point will be specified in each individual order.

The specific tasks placed under this contract will be determined based on the availability of funds, Government program needs and scheduling. NOTE: For

Proposal purposes only, CLIN pricing is not required in Section B of this solicitation.

(End of narrative B001)

Packaging and Marking _____________________

Deliveries or Performance _________________________

FOB POINT:

SHIP TO:

(Y00000) SHIPPING INSTRUCTIONS FOR CONSIGNEE

(SHIP-TO) WILL BE FURNISHED PRIOR

TO THE SCHEDULED DELIVERY DATE FOR

ITEMS REQUIRED UNDER THIS

REQUISITION.

13 92

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0010 OP5 SMALL CALIBER NRE CPFF REQUIREMENTS $ _______________________________________ __________________

SERVICE REQUESTED: OP5 SMALL CALIBER NRE CPFF

CLIN CONTRACT TYPE:

Cost Plus Fixed Fee

This CLIN is established to provide Cost Plus Fixed

Fee Requirements for Ordering Period 5 in accordance with the Statement of Work (SOW), set forth in

Section C of this solicitation, Section F and Section

H of this solicitation, and all other terms and conditions of this solicitation. Ordernig Period 5 is for one year, commencing at contract award.

Specific requirements and pricing will be set forth in each individual order.

The Delivery and/or Performance Schedule will be determined on an order-by-order basis.

Inspection, Acceptance, and Freight on Board (FOB)

Point will be specified in each individual order.

The specific tasks placed under this contract will be determined based on the availability of funds, Government program needs and scheduling. NOTE: For

Proposal purposes only, CLIN pricing is not required in Section B of this solicitation.

(End of narrative B001)

Deliveries or Performance _________________________

0011 CONTRACT DATA REQUIREMENTS LIST (CDRL) - DD1423 _______________________________________________

A001 CONTRACT DATA REQUIREMENTS LIST - DD1423 $ ** NSP ** ________________________________________ __________________

SERVICE REQUESTED: CDRL 1423

CLIN A001 is associated with CDRLs A0001 - A0021.

Reference individual CDRLs for applicable instructions and delivery dates. The CDRLs apply to all Ordering Periods.

14 92

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Data items will be determined and delivered throughout the life of the contract on an order-by-order basis. See Exhibit A in Section J of this solicitation.

(End of narrative B001)

Deliveries or Performance _________________________

15 92

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

STATEMENT OF WORK

(SOW)

For

Small Caliber (SC) Engineering, Manufacturing, Design and Testing Support

1.0 Scope:

1.1 Objectives

1.1.1 The Product Manager of Small Caliber Ammunition (PD-SC), an element of the Project Manager for Maneuver Ammunition Systems within the Joint Program Executive Office-Armament & Ammunition (JPEO-A&A), is in continuous production and development of munitions for small caliber applications. PD-SC manages engineering development, testing, evaluation, qualification and production of Small Caliber munitions systems. Small Caliber munitions are defined as ammunition containing rifle, machine gun, or pistol projectiles having diameters Caliber .50 (and its metric equivalent) and smaller, and shot-shell cartridges. This Statement of Work (SOW) is for requirements related to the engineering, development, testing, evaluation, producibility assessment and manufacture of related munitions systems. The objectives are enhanced lethality accuracy, survivability, reliability and cost reduction for legacy and future munitions systems, improved production and manufacturing capabilities, and better munitions life cycle management.

1.1.2 For this SOW, when using the term order, it may mean a delivery order (supplies) or task order (services), depending on the item or task procured. The specific orders placed under this contract are determined based on the Governments need, the availability of funds, Government program needs and scheduling.

2.0 Applicable Documents

The requirements and applicable documents for each order stemming from this contract will be further defined, modified or revised as required. This determination will be made on an order-by-order basis. Thus, each order may include requirements for specific specifications, standards, drawings, safety assessment, hazard analysis, critical characteristic procedures, security provisions, reporting, packaging, transportation, Government Furnished Property/Government Furnished Equipment (GFP/GFE), distribution statements, etc, and depends on the item or task being procured. The specific requirements and documents will be addressed and tailored per order.

Unless otherwise specified, the Specifications and Standards to be used are listed in ASSIST http://assist.dla.mil . The most current revision at the time of issuance of the individual order shall apply. Copies of the below specifications, standards, handbooks, or publications are also available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-

5094. Any documents required by manufacturers in connection with specific acquisition functions may be obtained from the contracting activity or as directed by the contracting officer.

2.1 Mandatory Documents

| MIL-A-2550C Notice 2 | Military Specification: Ammunition, | 28 May 1999 |

| | General Specification for | |

| DTL 13038145 | Multi-Small Caliber Ammunition | June 2014 |

| | Test Procedure (MSCATP) | |

| Z299.3 1993 | ANSI/SAMMI Centerfire Pistol & | 1993 |

| | Revolver American National Institute | |

| | / Standard Sporting Arms & Ammunition | |

| | Manufacturers Institute Inc. | |

| Z299.4 1992 | ANSI/SAMMI Centerfire Rifle | 1992 |

| Z299.1 1992 | ANSI/SAMMI Rimfire | 1992 |

| Z299.2 1992 | ANSI/SAMMI Shotshell | 1992 |

| MIL-A-70625A, Notice 2 | Automated Acceptance Inspection | 24 Apr 00 |

| | Equipment Design, Testing and | |

| | Approval, Of | |

| MIL-STD-1168C | Ammunition Lot Numbering and | 10 Jun 08 |

| | Ammunition Data Cards | |

| MIL-STD-1916 | DoD Preferred Methods for | 1 Apr 96 |

16 92

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

| | Acceptance of Products | |

| MIL-STD-882 E | DoD Standard Practice for | 11 May 12 |

| | System Safety | |

| MIL-STD-129R | Standard Practice for Military Marking | 18 Feb 14 |

| DoD Directive 5100.76-M | Physical Security of Sensitive | 12 Aug 00 |

| | Conventional Arms, Ammunition, and | |

| | Explosives | |

| DoD Directive 5160.62 | Single Manager Responsibilities for | 3 Jun 11 |

| | Military Explosive Ordnance Disposal | |

| | Technology and Training | |

| DoD Instruction 5230.24 | Distribution Statements on | 23 Aug 12 |

| | Technical Documents | |

| DoD Directive 5230.25 | Withholding of Unclassified Technical | 18 Aug 95 |

| | Data from Public Disclosure | |

| DoD Manual 5200.1 Vol 4 | DoD Information Security Program: | 24 Feb 12 |

| | Controlled Unclassified Information | |

| AR 75-15 | Policy for Explosive Ordnance Disposal | 22 Feb 05 |

| AR 190-11 | Physical Security of Arms, Ammunition, | 17 Jan 19 |

| | and Explosives | |

| AMC-R 385-100 | Safety Manual | 26 Sep 95 |

| NAS 411, Rev 2 | Hazardous Materials Management | 29 Apr 94 |

| | Program (National Aerospace Standard) | |

| TB 700-2 | DoD Ammunition and Explosives Hazard | 30 Jul 12 |

| | Classification Procedures | |

| NCSL Z540.3 | Calibration Laboratories and Measuring | 1 Jan 08 |

| | and Test Equipment - General Requirements | |

| | (National Conference of Standards | |

| | Laboratories) | |

| ISO 9000:2015 | Quality Management Systems Requirements | 2015 |

| | (International Organization of Standards) | |

| DoD Instruction (DoDI 5000.02) | Operation of the Defense Acquisition | 7 Jan 15 |

| | System | |

| MIL-STD-1472G | DoD Design Criteria Standard, | 15 Sep 20 |

| | Human Engineering | |

| MIL-STD-46855A | DoD Standard Practice, Human Engineering | 24 Feb 16 |

| | Requirements for Military Systems, | |

| | Equipment, and Facilities | |

| ISO/IEC 17025:2005 | General Requirements for the Competence | 12 May 05 |

| | of Testing and Calibration Laboratories | |

| Public Law 102-484 | | |

| Section 326 | | |

| Part 173, Subpart C, Section | Assignment of Class and Division | |

| 173.58(a0) of Title 49, CFR | for Explosives | |

| Parts 106-180 | | |

17 92

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

| Part 173, Subpart C, Section | Explosives Definition and Procedures | |

| 173.56(b)(1) or 173.56(c) | for Classification and Approval | |

| of Title 49 CFR | | |

| Part 172, Subpart D, Section | General Marking Requirements for | |

| 172.301(a) and 172.302(a) of | Non-bulk Packaging | |

| Title 49 CFR | | |

| Title 49 CFR | Code of Federal Regulations Transportation | |

| ST/SG/AC.10/1 Rev.17 or later | United Nations Transport of Dangerous Goods | |

| N/A | Environmental Protection Agency Comprehensive | |

| | Procurement Guidelines | |

| INME-PIC-IM Form 3002 | Instructions for clearing technical | 1 Mar 11 |

| | material for release to the public and | |

| | sample clearance form | |

| ITAR Part 120 | International Traffic in Arms Regulation | |

| Title 22, U.S.C., Sec 2751, | Arms Export Control Act | |

| Et Seq | | |

| Title 50, U.S.C., App 2401 | Export Administration Act | 1979 |

| Et Seq | (as amended) | |

3.0 Requirements

3.1 General Requirements

3.1.1. With the exception of equipment and materials that the Government elects to furnish as GFP, the contractor shall provide all facilities, equipment, labor, materials and services necessary to carry out the requirements of the issued orders. The following mandatory documents shall apply to the contractor(s): General Specification for Ammunition: MIL-A-2550C Notice 2, ANSI/SAMMI Centerfire

Pistol & Revolver American National Standard Institute / Sporting Arms & Ammunition Manufacturers Institute Inc.: Z299.3 1993, ANSI/SAMMI Centerfire Rifle: Z299.4 1992, ANSI/SAMMI Rimfire: Z299.1 1992, ANSI/SAMMI Shotshell Z299.2 1992, Calibration Laboratories and Measuring and Test Equipment - General Requirements (National Conference of Standards Laboratories): NCSL Z540.3, General

Requirements for the Competence of Testing and Calibration Laboratories: ISO/IEC 17025:2005, DoD Design Criteria Standard, Human

Engineering: MIL-STD-1472G, and DoD Standard Practice, Human Engineering requirements for Military Systems, Equipment, and Facilities:

MIL-STD-46855A.

3.1.2. The Contractor shall support orders within the following type requirements:

3.1.2.1. Small caliber non-recurring engineering (NRE) effort to build prototypes, conduct NRE, Design, Develop, Manufacture and Test, and produce quantities for small caliber ammunition as follows, but not limited to: 5.56mm, 7.62mm, Cal .50, 9mm, 6.8mm and sniper ammunition. Efforts may include but are not limited to: fabrication and assembly of small caliber ammunition and components, comparison testing, modeling and simulation, packaging, modifications to small caliber munitions, loading, testing propellant and explosives, materiel demilitarization, tool and equipment design for manufacturability or inspections, firing and testing small caliber munitions, the use or purchase of ballistic gelatin and other ballistic test support items and equipment, and production quantities.

3.1.2.2. Design, develop, manufacture and test of mechanical and/or electronic components individually and/or as systems/syb-systems.

Miniaturization of these components may also be a requirement. In most cases, components and/or sub-systems and systems will be required to survive gun launch environments.

3.1.2.3. Handling, storing, designing, developing, manufacuring, assembling, testing and production of items and assemblies containing energetic materials (e.g. explosives, pyrotechnics and propellants). This shall include containers of raw energetics as well as the items and assemblies that contain them.

3.1.2.4. Marking and packing of small caliber ammunition.

3.1.2.5. Ballistic test and evaluation of small caliber ammunition to include equipment such as but not limited to barrels, propellant, surrogate target materials and ballistic powder. Maintenance of small caliber weapons. Support of small caliber ammunition ballistic test and evaluation at a contractor facility or Government facility.

18 92

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

3.1.2.6. Ammunition design and production engineering services.

3.1.2.7. Manufacture of small caliber ammunition solid and cut-away models.

3.1.2.8. Performing destructive and non-destructive testing of small caliber ammunition and components (e.g. x-ray, eddy current, ultrasonic testing, metallurgical evaluation, energetic material tests, etc).

3.1.2.9. Interior and exterior aero-ballistic analyses of small caliber projectiles.

3.1.2.10. Design, fabrication, and delivery of test, manufacturing and packaging equipment to support small caliber ammunition qualification, analysis and production.

3.1.2.11. Demilitarization of Small Caliber Ammunition.

3.2 Engineering Design

3.2.1. The contractor shall integrate into present/developmental/future munitions systems the design, development, testing, producibility and manufacture of various components/sub-systems/systems that will affect/enhance/improve the system safety, system reliability or performance parameters (e.g. ignition system ruggedness and munition lethality) of these munitions systems. In addition to specific components/sub-systems/systems, the contractor may be required to bring certain technologies to a level of maturity that can be integrated at the component/sub-system/system levels as required. A requirement may be the integration of developed technologies, components, sub-systems and systems at the munitions system level (e.g. technology integrated into a functional munition). The integration at the munitions system level shall include component and system performance analysis.

3.2.2. Integration of technologies may include the following areas outlined below. Details will be specified in any applicable order that is placed.

3.2.2.1. Ignition system performance improvements.

3.2.2.2. Propellant Energy/Performance robustness improvements.

3.2.2.3. Advanced warhead designs.

3.2.2.4. Non-Lethal technologies.

3.2.2.5. Training Specific Ammunition Technologies.

3.2.2.6. Novel penetrator, payload, ballast, jacket/sabot, cartridge case, primer designs and material.

3.2.2.7. Limited Range Projectile technologies.

3.2.2.8. Insensitive munitions technologies.

3.2.2.9. Packaging technologies.

3.2.2.10. Advanced material design and manufacture for cartridge and projectile components.

3.2.2.11. Advanced propulsion and ignition systems (e.g. propellant and primer optimization).

3.2.2.12. High speed/volume manufacturing cost reduction improvements to include economic analysis/ Business Case Analysis.

3.2.2.13. Computational stress analysis (Finite Element Analysis (FEA)).

3.2.2.14. Computational modeling of propellants/interior ballistics.

3.2.2.15. Extreme environment (e.g. heat and stress) system testing and survivability conditions.

3.2.2.16. Performance enhanced coatings.

3.2.2.17. Optimization of projectile aerodynamics/aeroballistics.

3.2.2.18. Advanced production and manufacturing techniques including design/fabrication/qualification/transportation of equipment.

3.2.2.19. Testing equipment improvements (e.g. targets materials, barrel technologies).

19 92

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

3.2.3. The contractor shall provide additional technology and hardware support, as required, to support the integration and demonstration of technologies as provided above and as outlined in each order placed.

3.3. Manufacturing / Technology

3.3.1. Manufacturing technology delivery orders will be focused on improving manufacturing techniques and production processes with the goal of cost reduction and quality improvement. Orders shall ensure an effective and economic means of fabrication, assembly, inspection, test, installation, inspection and acceptance of components, sub-systems, systems and equipment used on current and future munition systems. Requirements may include the following areas outlined below. Details will be specified in any applicable order that is placed.

3.3.1.1. Improved manufacturing techniques used in the fabrication/assembly of complete cartridges, cartridge cases and cartridge/munition components/subsystems for small caliber munitions.

3.3.1.2. Improved fabrication, assembly and inspection procedures of small caliber ammunition for anti-personnel and armor/barrier optimization.

3.3.1.3. Improved inspection techniques for low/high volume production of small caliber ammunition components.

3.3.1.4. Improved manufacturing techniques for all other cartridge components (energetic and non-energetic) not listed above.

3.3.1.5. Design and fabrication of component-level to full cartridge models used to support manufacturing technology or production programs.

3.3.1.6. Design and fabrication of test equipment (DTL 13038145 MSCATP (reference section 2.1)) including deviations from specified equipment and procedures necessary to accomplish order objectives and goals

3.3.1.7. Design and fabrication of manufacturing and packaging equipment.

3.3.1.8. Design and fabrication of inspection equipment, hard/soft gauges, automated inspection equipment, utilized to inspect ammunition and components to check product in process or off line quality checks.

3.4. Quality and Inspection Requirements: The requirements of NCSL Z540.3 and ISO/IEC 17025:2005 shall apply. The requirements listed below may or may not apply to a specific order. Each order will identify which of the sections of 3.4 requirements will apply.

3.4.1. Quality Management System: The contractor shall maintain a quality management system (ISO 9001:2008), or equivalent, and the supplemental requirements contained in paragraphs 3.4.3 and 3.4.4 herein. If the contractor desires to utilize an alternate quality management system, the details shall be provided with the proposal for the applicable order for Government review and approval.

3.4.2.…