W15QKN22R0036 Amendment 0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0002 2022MAY17

W15QKN

ARMY CONTRACTING COMMAND - NJ

PICATINNY ARSENAL, NJ 07806-5000

LAUREN MALINSKI

EMAIL: LAUREN.M.MALINSKI.CIV@ARMY.MIL

W15QKN-22-R-0036

2022APR12

X

X

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 4

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: LAUREN MALINSKI

Buyer Office Symbol/Telephone Number: CCNJ-MC/(973)724-9622

Type of Contract 1: Firm Fixed Price

Type of Contract 2: Cost Plus Fixed Fee

Kind of Contract: Service Contracts

*** End of Narrative A0000 ***

The purpose of amendment 0002 to W15QKN-22-R-0036 is to answer the following questions received:

1. Section 3.1a states that proposals shall be submitted via DoD SAFE. However, b. states that CD copies are required and must match paper copies. Can the government confirm that no CD copies are required?

Government Response: Proposal via CD copy is not required. Proposals may be submitted via DoD SAFE or CD copy as detailed in the solicitation.

2. If subcontractors have proprietary cost data, can they upload a sealed pack separately to DoD SAFE?

Government Response: Yes, subcontractors may submit proprietary cost data via DoD SAFE.

3. The Labor Category Descriptions do not contain desired years of experience or education, can the government please provide to ensure consistency in bidding among proposers?

Government Response: Please see Section B for amended Labor Category qualification criteria changes.

4. Does the government anticipate that proposers will submit a Sr., Mid, and Jr. level for each labor category description? If so, can the government provide applicable years of experience and education for each level?

Government Response: Please see Section B for amended Labor Category qualification criteria changes.

5. The Labor Category Description includes a Clerical/Administrative position however, this position is missing from the Attachment 006

Matrix. Can the government provide an updated matrix that includes the Clerical/Administrative role?

Government Response: This labor category was included in error. The Government assumes this role will be included as part of the

Offeror's G&A. This Labor Category has been removed from Section B in its entirety.

6. If Offeror submits its most recent DCMA SB audit in lieu of providing ISR reports, would this be acceptable?

Government Response: Offerors must comply with the requirements delineated in Section H of the Solicitation. Compliance with FAR 52.219-

9 is required.

*** END OF NARRATIVE A0003 ***

2 4

W15QKN-22-R-0036

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

LABOR CATEGORY DESCRIPTIONS___________________________

A. SCIENTIST/PROGRAM MANAGER:

Organizes, directs, and coordinates planning and implementation of all contract support activities. Interface with government personnel.

Formulate and review project feasibility studies, determine costs, ensure conformance to work standards. Interpret policies, purposes, and goals of the organizations for subordinates. Manage logistics support analysis for military systems. Manage systems safety studies.

Identify, acquire and utilize company resources to achieve project technical objectives.

QUALIFICATION CRITERIA: BS + 15 years experience or combination of higher education. E.g. MS, some business degree and 10+ years experience

B. SENIOR ENGINEER:

Performs a variety of engineering tasks, either independently or under supervision, which are broad in nature and are concerned with the design and implementation, including personnel, hardware, software and support facilities and/or equipment. Performs with latitude for un-reviewed actions and decisions. Must be capable of system conceptualization, system level requirements definition and system test and evaluation. Must be familiar with probability, reliability, statistical analysis methods, sampling and test and evaluation techniques, data collection and applicable regulations and standards.

QUALIFICATION CRITERIA: BS, 10+ years experience, or a combination of education and experience

C. GENERAL ENGINEER:

Under supervision performs a variety of engineering tasks, which are broad in nature and are concerned with the design and implementation, including personnel, hardware, software and support facilities and/or equipment. Performs with some latitude for unreviewed actions and decisions. Must be capable of system conceptualization, system level requirements definition and system test and evaluation. Must be familiar with probability, reliability, statistical analysis methods, sampling and test and evaluation techniques, data collection and applicable regulations and standards.

QUALIFICATION CRITERIA: BS in science or engineering field, 4+ years experience Mid-Level Engineer

D. QUALITY CONTROL ENGINEER:

Has experience in probability, reliability, maintainability, statistical analysis methods, sampling and test and evaluation techniques, data collection and familiarity with applicable regulations and standards. Experience in the areas of development and operational testing at both component and system level; preparation, review and analysis of failure reports, verification of corrective actions;

requirement validation and their translation and trace to technical requirements and test specifications; and preparation and review of detailed test plans/procedures/reports.

QUALIFICATION CRITERIA: BS, 1+ years experience, this category refers to Jr. Engineer

E. ENGINEERING TECHNICIAN:

Provides highly technical expertise and skills in development and repair of prototype hardware, use of numerical control machines, and knowledge of shop practices, etc. Performs in all phases of hardware manufacturing process. Develop standards, procedures, and guidelines for tasks being performed. Perform in all phases of hardware testing, recording of test data, pointing out deviations resulting from equipment malfunction or observational errors. Participate in hardware evaluations. Develop test procedures and report test results.

QUALIFICATION CRITERIA: Associate's Degree in engineering or Technical degree, minimum 3 years experience

F. DRAFTSMAN:

Prepares mechanical and electronic drawings, as well as, technical illustrations, assembly drawings, schematics, facility layouts, wiring diagrams and wire lists. Develops documentation of design from concept to completion.

QUALIFICATION CRITERIA: Associate's degree or 2 years experience

G. MANUFACTURING:

Experience should include basic manufacturing planning, understanding of military specifications and certifications, raw material selection, engineering change process, design modification, use of CAD/CAM systems and manufacturing process development. Must be able to set-up and operate the full range of machine tools found in a well-equipped prototype development shop. Must be able to work from

3 4

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

engineering design drawings and technical specifications. Must be able to maintain dimensional accuracy, to + or - 0.0001", during machining processes, through the use of measuring instruments (e.g. vernier calipers, inside/outside & depth micrometers, gage blocks, surface and height gages, and dial indicators).

QUALIFICATION CRITERIA: HS or equivalent, 1-2 years experience, this includes manufacturing technicians

H. INSPECTION & TESTING:

Must have experience and skills in outlining, setting up, and operating test equipment that will meet specification requirements.

Perform in all phases of hardware testing, recording of test data, pointing out deviations resulting from equipment malfunction or observational errors. Participate in hardware evaluations. Develop test procedures and report test results.

QUALIFICATION CRITERIA: HS or equivalent, 1-2 years experience

I. QUALITY CONTROL TECHNICIAN:

Knowledge should include a basic understanding of and familiarity with Military and DoD quality standards. Specific experience may include: Destructive and/or non destructive testing; Collection of quality metrics; Execution of quality plans; prepare and execute quality related tests, collect data, repair appropriate reports; Assist in the conduct of subcontractor Source Inspections.

QUALIFICATION CRITERIA: HS or equivalent, 1-2+ years experience

J. PRODUCTION CONTROL:

Plan, direct, or coordinate the work activities and resources necessary for manufacturing products for prototypes and low rate production in accordance with cost, quality, and quantity specifications.

QUALIFICATION CRITERIA: HS or equivalent, 2+ years experience

K. TOOL/DIE/MODEL MAKER:

Must be able to fabricate and construct mechanisms, models and instruments that fulfill engineering requirements for equipment involving mechanical, electro-mechanical, hydraulic, optical and pneumatic principles. Determine necessity for special tools, dies and fixtures required to accomplish intricate machining and assembly operations and set-up and operate CNC machines (Machining Center, Lathe and Milling Machine).

QUALIFICATION CRITERIA: HS or equivalent, 3+ years experience

*** END OF NARRATIVE B0001 ***

4 4