W15QKN19R0014-0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Cost Plus Fixed Fee

0002 2018NOV02

W15QKN

ARMY CONTRACTING COMMAND - NJ

PICATINNY ARSENAL, NJ 07806-5000

JOHN SCOTT

EMAIL: JOHN.C.SCOTT158.CIV@MAIL.MIL

W15QKN-19-R-0014

2018OCT25

X

X

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 3

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: JOHN SCOTT

Buyer Office Symbol/Telephone Number: ACC-NJ-MC/(973)724-9061

Type of Contract 1: Cost Plus Fixed Fee

Type of Contract 2: Firm Fixed Price

Kind of Contract: Research and Development Contracts

*** End of Narrative A0000 ***

1. The purpose of Amendment 2 to W15QKN-19-R-0014 is to update the Section A Narrative to clarify that in accordance with 10 U.S.C.

2304(c)(1) as implemented by FAR 6.302-3, this acquisition is restricted to the United States and Canada for Cartridge Load, Assemble and Pack (LAP) for Low Rate Initial Production (LRIP) and Full Rate Production (FRP).

2. All other terms and conditions remain unchanged. The response date remains unchanged.

*** END OF NARRATIVE A0004 ***

Background:

The 40mm High Velocity (HV) High Explosive Dual Purpose Airburst (HEDP-AB) XM1176 Cartridge will provide the gunner with a munition that is able to engage targets in the open and defilade position while still having the capability to penetrate lightly armored vehicles. The

40mm HV XM1176 is intended to be fired from Mk19 Grenade Machine Guns (GMG) that are currently used for the Army close combat forces and sustainment units. The XM1176 is a high velocity (HV) round that will contain a cartridge case with a propellant charge, warhead, and fuze that is capable of functioning in both Airburst (AB) and Point Detonation (PD) modes. A Programming Unit (PU) shall be utilized to enable the 40mm HV XM1176 to airburst at a designated range. The PU shall act as a standalone programmer and have the ability to receive ranges from a Fire Control System (FCS).

Acquisition Approach:

In accordance with 10 U.S.C. 2304(c)(1) as implemented by FAR 6.302-3, this acquisition is restricted to the United States and Canada for Cartridge Load, Assemble and Pack (LAP) for Low Rate Initial Production (LRIP) and Full Rate Production (FRP). This acquisition will utilize full and open competition (F&OC) and Best Value/Subjective Trade-Off procedures.

This acquisition will consist of a competitive Engineering and Manufacturing Development (EMD) phase to include Design Engineering Tests

1 and 2 with up to two (2) awards made and a downselect to one (1) contractor for Developmental Test and Evaluation (DT&E), LRIP1, LRIP2, and Production. The contract type will be Cost Plus Fixed Fee (CPFF) for EMD. The LRIP1, LRIP2, and FRP options will be Firm

Fixed Price (FFP). The period of performance for the entire contract will be 72 months. This includes thirty-three (33) months of EMD, twenty-seven (27) months for LRIP1 and LRIP2, and twelve (12) months for FRP.

Near the end of Design Engineering Test (DET) 2, contractors that were awarded EMD contracts with LRIPs/FRP options must submit updated

Technical and Price proposals, from which the Government plans to down select to one (1) contractor for Developmental Test and

Evaluation (DT&E) and possible exercise of the FFP options for LRIP1, LRIP2, and FRP.

It is anticipated that up to two (2) awards will be made using the Best Value Subjective Trade-Off Source Selection Methodology and will be based on an integrated assessment of the Factors/Sub-Factors and their relative order of importance. However, the Government reserves the right to make a single award if it is determined to be in the best interest of the Government. Awards will be made to the best overall proposal(s) that are determined to be the most beneficial to the Government and within the constraints of available funding.

Should more than one contract be awarded in EMD, a second Best Value decision to select a single awardee for DT&E, LRIP1, LRIP2, and FRP will be made. The technical solution will be evaluated on the offerors ability to produce a cartridge and programming unit that is capable of meeting all threshold requirements while maximizing the reliability, repeatability, and lethal effects of air burst and point detonation performance against personnel and materiel targets across all operational environments to include contested Radio Frequency

(RF) environments.

Limited Distribution Data Information Instructions:

The following documents are labeled Distribution Statement D:

-Draft Performance Specifications

-Interface Control Drawings (ICDs)

-Quality Assurance Requirements

-Operations Security (OPSEC) Plan

In addition to being labeled Distribution D, the System Specification for the XM1176 HEDP-AB and XM101 Programming Unit is also determined to contain Export-Controlled technical data. The Handling/Destroying of Unclassified/Limited Distribution documents shall be handled using the same standard as "For Official Use Only (FOUO)" material, and shall be destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

2 3

W15QKN-19-R-0014

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

The highest classification level pertaining to the resultant contract is "SECRET".

To obtain these documents, Offerors are required to submit an AMSTA-AR 1350 Technical Data Request Questionnaire, a DD 2345 Military

Critical Technical Data Agreement, and a fully executed Non-Disclosure and Non Use Agreement all of which are included as attachments to this Request for Proposal (RFP) to the Contract Specialist and Contracting Officer. The Handling/Destroying of Unclassified/Limited

Distribution documents shall be handled using the same standard as "For Official Use Only (FOUO)" material, and shall be destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

*** END OF NARRATIVE A0001 ***

3 3

W15QKN-19-R-0014

SECTION A