W15QKN17R0140-0006.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0006 2017NOV16

W15QKN

ARMY CONTRACTING COMMAND - NJ

PICATINNY ARSENAL, NJ 07806-5000

MELISSA L. SENA

EMAIL: MELISSA.L.SENA.CIV@MAIL.MIL

W15QKN-17-R-0140

2017OCT12

X

X

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 9

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: MELISSA L. SENA

Buyer Office Symbol/Telephone Number: ACC-NJ-CC/(973)724-9002

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

1. The purpose of Amendment 0006 to solicitation W15QKN-17-R-0140 is as follows:

a) Section D Packaging and Marking, the following paragraphs in section C, entitled C. Item Nomenclature: Government Furnished

Property, are revised as follows:

FROM: C. ITEM NOMENCLATURE: GOVERNMENT FURNISHED PROPERTY: Transmitter Antenna; M16 Receiver; MK16 MOD 0 Receiver; Code Generator, MK152

MOD

0; Code Generator, M152 SOF; RF Board Tester; Receiver Controller Board Tester; Transmitter Controller Board Tester; Fire Pulse Monitor;

Fire Pulse Monitor (9V); Fire Board Tester; XMTR Frequency Adjust Unit; Antenna Adapter; Transmitter Code Reader; Transmitter RF Board

Tester; Fire Pulse Simulator; CAM Switch Assembly Tester; Transmitter Power Adapter; Teradyne Test Station with adapter

TO: C. ITEM NOMENCLATURE: GOVERNMENT FURNISHED PROPERTY: Transmitter Antenna; M16 Receiver; MK16 MOD 0 Receiver; Code Generator, MK152

MOD

0; Code Generator, M152 SOF; RF Board Tester; Receiver Controller Board Tester; Transmitter Controller Board Tester; Fire Pulse Monitor;

Fire Pulse Monitor (9V); Fire Board Tester; XMTR Frequency Adjust Unit; Antenna Adapter; Transmitter Code Reader; Transmitter RF Board

Tester; Fire Pulse Simulator; CAM Switch Assembly Tester; Transmitter Power Adapter; Teradyne Test Station with adapter; Transmitter

MK26 (Golden Unit)

FROM: TRANSPORTATION REQUIREMENT CHECKLIST: 1. Nomenclature of item(s) being procured: Transmitter Antenna; M16 Receiver; MK16 MOD 0

Receiver; Code Generator, MK152 MOD 0; Code Generator, M152 SOF; RF Board Tester; Receiver Controller Board Tester; Transmitter

Controller Board Tester; Fire Pulse Monitor; Fire Pulse Monitor (9V); Fire Board Tester; XMTR Frequency Adjust Unit; Antenna Adapter;

Transmitter Code Reader; Transmitter RF Board Tester; Fire Pulse Simulator; CAM Switch Assembly Tester; Transmitter Power Adapter;

Teradyne Test Station with adapter

TO: TRANSPORTATION REQUIREMENT CHECKLIST: 1. Nomenclature of item(s) being procured: Transmitter Antenna; M16 Receiver; MK16 MOD 0

Receiver; Code Generator, MK152 MOD 0; Code Generator, M152 SOF; RF Board Tester; Receiver Controller Board Tester; Transmitter

Controller Board Tester; Fire Pulse Monitor; Fire Pulse Monitor (9V); Fire Board Tester; XMTR Frequency Adjust Unit; Antenna Adapter;

Transmitter Code Reader; Transmitter RF Board Tester; Fire Pulse Simulator; CAM Switch Assembly Tester; Transmitter Power Adapter;

Teradyne Test Station with adapter; Transmitter MK26 (Golden Unit)

FROM: 2. Number of items being procured and the delivery schedule:

Qty Type P/N S/N Value

1 Transmitter Antenna 11752884 Denke Sample C $500 ea

1 M16 Receiver 11752886 A-R02100 $5,000 ea

1 MK16 MOD 0 Receiver 11753073 A-R02200 $5,000 ea

3 Code Generator, MK152 MOD 0 11753224 A-R02301 $15,000 ea

A-R02302, A-R02303

3 Code Generator, M152 SOF 11753237 A-R01797, $15,000 ea

A-R01883, A-R01899

2 RF Board Tester 11753233 A-R01796 $20,000 ea

A-R01896

2 Receiver Controller Board 11753235 A-R01786, $15,000 ea

Tester A-R01900

1 Transmitter Controller Board 11753249 A-R01791 $15,000 ea

Tester

3 Fire Pulse Monitor 11753240 A-R01789, $500 ea

A-R01790, A-R01885

3 Fire Pulse Monitor (9V) 11753241 A-R01892, $500 ea

A-R01893, A-R01894

2 Fire Board Tester 11753242 A-R01794, $25,000 ea

A-R01898

2 9

W15QKN-17-R-0140 0006

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

1 XMTR Frequency Adjust Unit 11753244 A-R01787 $30,000 ea

2 Antenna Adapter 11753246 A-R01882, $1,000 ea

A-R01897

1 Transmitter Code Reader 11753247 A-R01788 $20,000 ea

1 Transmitter RF Board Tester 11753251 A-R01793 $20,000 ea

3 Fire Pulse Simulator 11753253 A-R01795, $10,000 ea

A-R01891, A-R01901

1 CAM Switch Assembly Tester 11753504 A-R12403 $5,000 ea

1 Transmitter Power Adapter 11753255 A-R01880 $5,000 ea

1 Teradyne Test Station with adapter N-R06885 $15,000 ea

GFE to be provided to a TBD contractor 90 working days ACA.

TO: 2. Number of items being procured and the delivery schedule:

Qty Type P/N S/N Value

1 Transmitter Antenna 11752884 Denke Sample C $500 ea

1 M16 Receiver 11752886 A-R02100 $5,000 ea

1 MK16 MOD 0 Receiver 11753073 A-R02200 $5,000 ea

3 Code Generator, MK152 MOD 0 11753224 A-R02301 $15,000 ea

A-R02302, A-R02303

3 Code Generator, M152 SOF 11753237 A-R01797, $15,000 ea

A-R01883, A-R01899

2 RF Board Tester 11753233 A-R01796 $20,000 ea

A-R01896

2 Receiver Controller Board 11753235 A-R01786, $15,000 ea

Tester A-R01900

1 Transmitter Controller Board 11753249 A-R01791 $15,000 ea

Tester

3 Fire Pulse Monitor 11753240 A-R01789, $500 ea

A-R01790, A-R01885

3 Fire Pulse Monitor (9V) 11753241 A-R01892, $500 ea

A-R01893, A-R01894

2 Fire Board Tester 11753242 A-R01794, $25,000 ea

A-R01898

1 XMTR Frequency Adjust Unit 11753244 A-R01787 $30,000 ea

2 Antenna Adapter 11753246 A-R01882, $1,000 ea

A-R01897

1 Transmitter Code Reader 11753247 A-R01788 $20,000 ea

1 Transmitter RF Board Tester 11753251 A-R01793 $20,000 ea

3 Fire Pulse Simulator 11753253 A-R01795, $10,000 ea

A-R01891, A-R01901

1 CAM Switch Assembly Tester 11753504 A-R12403 $5,000 ea

1 Transmitter Power Adapter 11753255 A-R01880 $5,000 ea

1 Teradyne Test Station with adapter N-R06885 $15,000 ea

1 Transmitter MK26 (Golden Unit)11753072 Golden Unit $7,500 ea

GFE to be provided to a TBD contractor 90 working days ACA.

b) Section J List of Attachments is revised as follows:

1) Attachment 0014: Government Furnished Property List is replaced in its entirety as follows:

FROM: Attachment 0014, entitled: Government Furnished Property List, dated: 19-MAY-2017, pages: 009

TO: Attachment 0014, entitled: Revised Government Furnished Property List, dated: 15-NOV-2017, pages: 009

2) The following attachments are added:

Attachment 0022: Amendment 0006 TDP Questions and Responses Limited Distribution

Attachment 0023: 12977213_bag barrier_Distribution A

Attachment 0024: 8794342 - Distribution A

Attachment 0025: 8796522 - Distribution A

Attachment 0026: 8594163 - Distribution A

3 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Attachment 0027: 8794342AL - Distribution A

Attachment 0028: 800298 REV F - Limited Distribution - Export Control

c) Responses to the following solicitation questions received in regard to Solicitation W15QKN-17-R-0140 are as follows:

Amendment 0006 Question 1: see * below

Amendment 0006 Question 2: see * below

Amendment 0006 Question 3: see * below

Amendment 0006 Question 4: see * below

Amendment 0006 Question 5: We would like to request a delay of the submission date?

Response to Question 5: See Amendment 0005 which revised the solicitation close date to 04 December 2017, 02:00 pm.

Amendment 0006 Question 6: see * below

Amendment 0006 Question 7: L.22.4 SPECIFIC PROPOSAL INSTRUCTIONS states that "The narrative discussions shall also be related to the applicable SOW paragraph by placing the appropriate SOW number at the beginning of the discussion text." QUESTION: In order to be compliant with these instructions, is the USG indicating that they want a SOW reference preceding each paragraph of the Technical narratives or is it applicable to tie the technical narratives with the SOW references via a Compliance Matrix or Cross Reference

Matrix?

Response to Question 7: Offerors should follow the instructions provided in Section L of the solicitation addressing proposal preparation and submission. In accordance with Section L.22.4, the narrative discussions in the Technical Volumes shall also be related to the applicable SOW paragraph by placing the appropriate SOW number at the beginning of the discussion text. Submission of additional documentation is at the offerors discretion.

Amendment 0006 Question 8: see * below

* Amendment 0006 Questions 1, 2, 3, 4, 6, and 8 and Government Response are addressed as follows:

The Government has received technical questions 1, 2, 3, 4, 6, and 8 pertaining directly to the Technical Data Package (TDP) drawings which contains limited distribution statement markings. Consequently the questions, as well as the Governments response to the questions, will only be made available to Contractors who have submitted the appropriate paperwork and have been cleared to receive a copy of the TDP. Please note additional TDP drawings are included in the Government Response and are being incorporated into Section J of the solicitation as Attachment 0022 entitled Amendment 0006 TDP Questions and Responses.

To obtain a copies of any of the attachments incorporated via this amendment that contain limited distribution statements, please follow the procedures outlined in the solicitation for requesting a copy of the Technical Data Package.

PLEASE NOTE: Potential Offerors who have already submitted the required documentation and have already received a copy of the TDP DO NOT have to resubmit the DD Form 2345, AMSTA-AR Form 1350 or the Non Disclosure and Non Use Agreement forms, but MUST still submit a request specifying which attachments from this amendment they would like copies of.

Please submit your request via email to the points of contact identified in the solicitation.

2. All other terms and conditions remain unchanged.

*** END OF NARRATIVE A0008 ***

4 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION D - PACKAGING AND MARKING

A. ITEM NOMENCLATURE: Firing Device, Demolition: Radio Type, M152_________________________________________________________________

1. Commercial packaging requirement: N/A

Bar Code Requirements: see item 2.c.

2. Detailed Requirements shall apply to this procurement:

a. Detailed Preservation and Packaging Requirements: ARL DWG 11753014

b. Detailed Packing Requirements: ARL DWG 11753014

c. Detailed Marking Requirements: ARL DWG 11753064/11753014 and MIL-STD-129, 2D Bar Codes required.

d. Detailed Unitization Requirements: DAC DWG 19-48-4116/129B

e. Applicable Exception(s)/Special Notes to Packaging Requirements:

1) Wood Packaging Materials - Heat Treatment and Marking of Wood Packaging Materials: In accordance with the requirements of

International Standards for Phytosanitary Measures (ISPM) 15, the following commercial heat treatment process has been approved by the

American Lumber Standards Committee (ALSC) and is required for all Wood Packaging Material (WPM). WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process such as corrugated fiberboard, plywood, particleboard, veneer and oriented strand board. All WPM shall be constructed from Heat Treated (HT to 56 degrees Centigrade for 30 continuous minutes) lumber and certified by an accredited agency recognized by the ALSC in accordance with Wood Packaging Material Policy and Wood Packaging

Material Enforcement Regulations (see URL: ). All materials must include certification markings in accordance with ALSC standards and be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides and ends of the pallet and be contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ALSC approved DUNNAGE stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry.

2) Marking: In addition to any special marking and markings called out by the Special Packaging Instruction or drawing:

- All unit packages, intermediate packs, exterior shipping containers, and, as applicable, unitized loads shall be marked in accordance with MIL-STD-129, Revision R, dated February, 2014, including bar coding. The contractor is responsible for application of special markings as discussed in the Military Standard regardless of whether specified in the contract or not. Special markings include, but are not limited to, shelf-life markings, structural markings, and transportation special handling markings. The marking of pilferable and sensitive materiel will not identify the nature of the materiel.

NOTE: Passive RFID tagging is required in all contracts that contain DFARS clause 252.211-7006. Contractors must check the solicitation and/or contract for this clause. For details and most recent information, see for the current DoD Suppliers Passive RFID Information

Guide and Supplier Implementation Plan. If the item has Unique Item Identifier (UII) markings then the UII needs to be 2D bar coded and applied on the unit package, intermediate and exterior containers, and the unit load.

TRANSPORTATION REQUIREMENT CHECKLIST

1. Nomenclature of item(s) being procured: Firing Device, Demolition: Radio Type, M152

2. Number of items being procured and the delivery schedule: See Section B.

3. Destination of delivered items: See Section B.

4. Estimated weight of the item in its shipping container: Less than 200 pounds.

5. Security classification of the material to be shipped: Unclassified

6. DOT Container Marking / Hazard Classification (Explosive Only): Non Hazardous (No DOT Marking Required)

7. Transportation Security Category for Arms, Ammunition or Explosives (AA&E) as categorized in DoD 5100.76-M: Item is not AA&E

B. ITEM NOMENCLATURE: FIRING DEVICE, DEMOLITION: MK152 MOD 0____________________________________________________________

5 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

1. Commercial packaging requirement: N/A

Bar Code Requirements: see item 2.c.

2. Detailed Requirements shall apply to this procurement:

a. Detailed Preservation and Packaging Requirements: ARL DWG 11754204

b. Detailed Packing Requirements: ARL DWG 11754204

c. Detailed Marking Requirements: ARL DWG 11753699/11754204 and MIL-STD-129, 2D Bar Codes required.

d. Detailed Unitization Requirements: Standard requirement below applies until a specific procedure is available:

Unitization Drawing: Standard: Shipments of identical items going to the same destination shall be palletized if they have a total cubic displacement of 50 cubic feet or more unless skids or other forklift handling features are included on the containers. Pallet loads must be stable, and to the greatest extent possible, provide a level top for ease of stacking. A palletized load shall be of a size to allow for placement of two loads high and wide in a conveyance. The weight capacity of the pallet must be adequate for the load. The preferred commercial expendable pallet is a 40 x 48 inch, 4-way entry pallet although variations may be permitted as dictated by the characteristics of the items being unitized. The load shall be contained in a manner that will permit safe handling during shipment and storage.

e. Applicable Exception(s)/Special Notes to Packaging Requirements:

1) Wood Packaging Materials - Heat Treatment and Marking of Wood Packaging Materials: In accordance with the requirements of

International Standards for Phytosanitary Measures (ISPM) 15, the following commercial heat treatment process has been approved by the

American Lumber Standards Committee (ALSC) and is required for all Wood Packaging Material (WPM). WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process such as corrugated fiberboard, plywood, particleboard, veneer and oriented strand board. All WPM shall be constructed from Heat Treated (HT to 56 degrees Centigrade for 30 continuous minutes) lumber and certified by an accredited agency recognized by the ALSC in accordance with Wood Packaging Material Policy and Wood Packaging Material

Enforcement Regulations (see URL: ). All materials must include certification markings in accordance with ALSC standards and be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides and ends of the pallet and be contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ALSC approved DUNNAGE stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry.

2) Marking:

- All unit packages, intermediate packs, exterior shipping containers, and, as applicable, unitized loads shall be marked in accordance with MIL-STD-129, Revision R, dated February, 2014, including bar coding. The contractor is responsible for application of special markings as discussed in the Military Standard regardless of whether specified in the contract or not. Special markings include, but are not limited to, shelf-life markings, structural markings, and transportation special handling markings. The marking of pilferable and sensitive materiel will not identify the nature of the materiel.

NOTE: Passive RFID tagging is required in all contracts that contain DFARS clause 252.211-7006. Contractors must check the solicitation and/or contract for this clause. For details and most recent information, see for the current DoD Suppliers Passive RFID Information

Guide and Supplier Implementation Plan. If the item has Unique Item Identifier (UII) markings then the UII needs to be 2D bar coded and applied on the unit package, intermediate and exterior containers, and the unit load.

TRANSPORTATION REQUIREMENT CHECKLIST

1. Nomenclature of item(s) being procured: FIRING DEVICE, DEMOLITION: MK152 MOD 0

2. Number of items being procured and the delivery schedule: See Section B.

3. Destination of delivered items: See Section B

4. Estimated weight of the item in its shipping container: Less than 200 pounds.

5. Security classification of the material to be shipped: Unclassified

6. DOT Container Marking / Hazard Classification (Explosives only): Non Hazardous (No DOT Marking Required)

7. Transportation Security Category for Arms, Ammunition or Explosives (AA&E) as categorized in DoD 5100.76-M: Item is not AA&E

6 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

C. ITEM NOMENCLATURE: GOVERNMENT FURNISHED PROPERTY: Transmitter Antenna; M16 Receiver; MK16 MOD 0 Receiver; Code Generator, MK152 MOD________________________________________________________________________________________________________________________________________

0; Code Generator, M152 SOF; RF Board Tester; Receiver Controller Board Tester; Transmitter Controller Board Tester; Fire Pulse Monitor;_________________________________________________________________________________________________________________________________________

Fire Pulse Monitor (9V); Fire Board Tester; XMTR Frequency Adjust Unit; Antenna Adapter; Transmitter Code Reader; Transmitter RF Board_______________________________________________________________________________________________________________________________________

Tester; Fire Pulse Simulator; CAM Switch Assembly Tester; Transmitter Power Adapter; Teradyne Test Station with adapter; Transmitter_____________________________________________________________________________________________________________________________________

MK26 (Golden Unit)__________________

1. Commercial packaging requirement: See 52.211-4000 - Commercial Packaging Requirement (applicable to GFP only)

Bar Code Requirements: 2D Bar Codes NOT required.

2. Detailed Requirements shall apply to this procurement:

a. Detailed Preservation and Packaging Requirements: None

b. Detailed Packing Requirements: Pack in a vacuum heat sealed anti-static water-vapor-proof barrier bag with desiccant as needed.

c. Detailed Marking Requirements: Mark Qty, Nomenclature, PN, POC and Property # on outer container at minimum.

d. Detailed Unitization Requirements: None

e. Applicable Exception(s)/Special Notes to Packaging Requirements: None

TRANSPORTATION REQUIREMENT CHECKLIST____________________________________

1. Nomenclature of item(s) being procured: Transmitter Antenna; M16 Receiver; MK16 MOD 0 Receiver; Code Generator, MK152 MOD 0; Code

Generator, M152 SOF; RF Board Tester; Receiver Controller Board Tester; Transmitter Controller Board Tester; Fire Pulse Monitor; Fire

Pulse Monitor (9V); Fire Board Tester; XMTR Frequency Adjust Unit; Antenna Adapter; Transmitter Code Reader; Transmitter RF Board

Tester; Fire Pulse Simulator; CAM Switch Assembly Tester; Transmitter Power Adapter; Teradyne Test Station with adapter; Transmitter

MK26 (Golden Unit)

2. Number of items being procured and the delivery schedule:

Qty Type P/N S/N Value

1 Transmitter Antenna 11752884 Denke Sample C $500 ea

1 M16 Receiver 11752886 A-R02100 $5,000 ea

1 MK16 MOD 0 Receiver 11753073 A-R02200 $5,000 ea

3 Code Generator, MK152 MOD 0 11753224 A-R02301 $15,000 ea

A-R02302, A-R02303

3 Code Generator, M152 SOF 11753237 A-R01797, $15,000 ea

A-R01883, A-R01899

2 RF Board Tester 11753233 A-R01796 $20,000 ea

A-R01896

2 Receiver Controller Board 11753235 A-R01786, $15,000 ea

Tester A-R01900

1 Transmitter Controller Board 11753249 A-R01791 $15,000 ea

Tester

3 Fire Pulse Monitor 11753240 A-R01789, $500 ea

A-R01790, A-R01885

3 Fire Pulse Monitor (9V) 11753241 A-R01892, $500 ea

A-R01893, A-R01894

2 Fire Board Tester 11753242 A-R01794, $25,000 ea

A-R01898

1 XMTR Frequency Adjust Unit 11753244 A-R01787 $30,000 ea

2 Antenna Adapter 11753246 A-R01882, $1,000 ea

A-R01897

1 Transmitter Code Reader 11753247 A-R01788 $20,000 ea

1 Transmitter RF Board Tester 11753251 A-R01793 $20,000 ea

3 Fire Pulse Simulator 11753253 A-R01795, $10,000 ea

A-R01891, A-R01901

1 CAM Switch Assembly Tester 11753504 A-R12403 $5,000 ea

1 Transmitter Power Adapter 11753255 A-R01880 $5,000 ea

1 Teradyne Test Station with adapter N-R06885 $15,000 ea

1 Transmitter MK26 (Golden Unit)11753072 Golden Unit $7,500 ea

7 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

GFE to be provided to a TBD contractor 90 working days ACA.

3. Destination of delivered items: To Be Determined

4. Estimated weight of the item in its shipping container: Lesss than 200 pounds

5. Security classification of the material to be shipped: Unclassified

6. DOT Container Marking / Hazard Classification (Explosives only): Non Hazardous (No DOT Marking Required)

7. Transportation Security Category for Arms, Ammunition or Explosives (AA&E) as categorized in DoD 5100.76-M: Item is not AA&E

*** END OF NARRATIVE D0004 ***

8 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION J - LIST OF ATTACHMENTS

List of Number List of Number

Addenda Title Date of Pages Transmitted By Addenda Title Date of Pages Transmitted By________________ ____________________________________________________________ _______________ ____________ _______________________________ ____________________________________________________________ _______________ ____________ _______________

Attachment 0014 REVISED GOVERNMENT FURNISHED PROPERTY LIST 15-NOV-2017 009 DATA

Attachment 0022 AMENDMENT 0006 TDP QUESTIONS AND RESPONSES - LIMITED 002 DATA

DISTRIBUTION

Attachment 0023 12977213, BARRIER BAG_DISTRIBUTION A 29-JAN-1998 001 DATA

Attachment 0024 8794342 - DISTRIBUTION A 15-OCT-2005 001 DATA

Attachment 0025 8796522 - DISTRIBUTION A 20-APR-2017 003 DATA

Attachment 0026 8594163 - DISTRIBUTION A 09-JUN-2008 001 DATA

Attachment 0027 8794342 - DISTRIBUTION A 15-OCT-2005 001 DATA

Attachment 0028 800298 REV F - LIMITED DISTRIBUTION - EXPORT CONTROLLED 05-NOV-2009 001 DATA

9 9