Attachment_0008_CONTRACT_C_REQUIREMENTS_20-APR-17.pdf

CONTRACT C REQUIREMENTS

PRON: P16C15 AMC:

TDPL: 9345348:19200

NSN: 1310-01-603-9255

AMSC:

TDPL DATE: 04/20/2017

NOMENCLATURE : BODY TUBE ASSEMBLY

ENGINEERING EXCEPTIONS: The Following Engineering Exceptions Apply To This Procurement Action(s):

TDPL:

DOCUMENT: DELETE: SUBSTITUTE:

DR 12991870 X - - -

DR 12991871 X - - -

DR 12991872 X - - -

DR 9345342 X - - -

GFM/GFE : DRAWING NO

Drawing Masters REQUIRED (Check One): ___________________ YES X___________________ NO

Telephone# ___________________ E-mail _______________________________

CERTIFICATION SIGNATURE(s) / CONCURRENCE :

Contract C Requirements Page 1 of 1 Pages

For Drawing 9345348:

-Add pull test information back to the drawing as Note 3

Change Note 3:

From: "3. -DELETED-"

To: "3. ASSEMBLY MUST WITHSTAND A PULL TEST OF 2,000 LBS WITHOUT MOVEMENT OF THE ADAPTER

IN ACCORDANCE WITH MIL-DTL-32285."

-Update Note 4 to add missing word "EXTERIOR"

Change Note 4:

From: "4. PROTECTIVE FINISH: FINISH 5.1.1 ON ALL SURFACES FOLLOWED BY 20.1 OR 20.2 OF MIL-STD-171 (TYPE II OF MIL-DTL-11195), COLOR WHITE NO. 37875 OF FED-STD-595 ON ALL SURFACES EXCEPT PRESS FIT SURFACE (2.224 ID), ENDS AND THREADS AS SHOWN. EXTERIOR SURFACES SHALL WITHSTAND A 48 HOUR EXPOSURE TO 5% SALT SPRAY IAW ASTM B117. MINIMUM COATING THICKNESS SHALL BE 1.0 MIL.

THE MAXIMUM MATERIAL CONDITION PRIOR TO PAINT, AND THE PAINT THICKNESS MUST BE

CONTROLLED TO PERMIT PASSAGE OF A MAXIMUM RING GAGE AFTER PAINT."

To: "4. PROTECTIVE FINISH: FINISH 5.1.1 ON ALL SURFACES FOLLOWED BY 20.1 OR 20.2 OF MIL-STD-171 (TYPE II OF MIL-DTL-11195), COLOR WHITE NO. 37875 OF FED-STD-595 ON ALL EXTERIOR SURFACES EXCEPT PRESS FIT SURFACE (2.224 ID), ENDS AND THREADS AS SHOWN. EXTERIOR SURFACES SHALL WITHSTAND A 48 HOUR EXPOSURE TO 5% SALT SPRAY IAW ASTM B117. MINIMUM COATING THICKNESS SHALL BE 1.0 MIL. THE MAXIMUM MATERIAL CONDITION PRIOR TO PAINT, AND THE PAINT THICKNESS

MUST BE CONTROLLED TO PERMIT PASSAGE OF A MAXIMUM RING GAGE AFTER PAINT."

POC____________________