A018__DD1423_Failure_Analysis_and_CAR_revised_02_May_2017.docx
DOCX document 18 KB Posted
- Attached to
- 60mm and 81mm Body Tubes and Tail Cones
- Solicitation number
- W15QKN-17-R-0024
About this file
CDRL A018 Revised 02 May 2017
View the file
Other files
Show all 38
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
Form Approved CMB No. 0704-0188
Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 222202-2302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract. PR No. listed in Block E.
A. Contract Line Item No.
B. Exhibit
C. Category
D. System/Item.
Body Tube Assembly and Tail Cone Assembly for M721 and M767 Body Tube Assembly and Tail Cone for M853A1 and M816 Body Tube Assembly and Tail Cone Assembly for M819
E. Contract/PR NO.
F. Contractor
1. Data Item No A018
2. Title of Data Item:
Failure Analysis and Corrective Action Report
3. Subtitle:
Independent Verification
4. Authority (Data Acquisition Document No.)
DI-SESS-81315B
5. Contract Reference Sec C 12.2 & 12.3
6. Requiring Office
RDAR-MEM-P
7. DD 250
LT
9. Dist Statement Required
D
10. Frequency As Required
12. Date of First Submission At FAT
14. Distribution
8. APP Code
11. As of Date
13. Date of Subsequent Submission As Required
| a. Addressee |
| b. Copies |
| Draft |
| Final |
| Reg |
| Repro |
16. REMARKS
Block 10, 12 & 13.
Tensile Testing: see C.12.2 for submission frequency. First submission shall be at FAT.
Chemical Analysis: see C.12.3 for submission frequency. First submission shall be at FAT.
Block 14 Submit electronically to:
Address will be provided in Section G - Distribution List
ACC-NJ-CA
RDAR-MEM-P
RDAR-EIQ-MC
Government QAR
SFAE-AMO-CAS
RDAR-EIQ-PE
15. TOTAL
G. PREPARED BY
Cuong D Tran
H. DATE
02MAY17
I. APPROVED BY
Cuong D Tran
J. DATE
02MAY17
DD Form 1423-1, JUN 90 previous editions are obsolete Page of Pages
File details come from the government source that posted it. Updated .