VT Owens Hall Chick-fil-A Renovations UBO Review Drawings_HFR Review 12-09-24 (002).pdf

PDF 7 MB Posted Feb 4, 2025

Attached to: Owens Hall Chick-fil-A Renovations
Solicitation number: 85722
Issued by: Middlesex County, Virginia

View the file

Other files

File	Type	Posted
IFB 306852501_Owens Hall Chickfila Renovations_Project Manual.pdf	PDF	Feb 11, 2025
IFB 306852501_Addendum 1.pdf	PDF	Feb 11, 2025
IFB 306852501_Addendum 3.pdf	PDF	Feb 11, 2025
IFB 306852501_Addendum 2.pdf	PDF	Feb 11, 2025
IFB 306852501_Addendum 3.pdf	PDF	Feb 11, 2025
IFB 306852501_Addendum 2.pdf	PDF	Feb 11, 2025
IFB 306852501_Addendum 1.pdf	PDF	Feb 11, 2025
VT Owens Hall Chick-fil-A Renovations UBO Review Drawings_HFR Review 12-09-24 (002).pdf	PDF	Feb 11, 2025
VT Owens Hall Chick-fil-A Renovations UBO Review Drawings_HFR Review 12-09-24 (002).pdf	PDF	Feb 11, 2025
IFB 306852501_Owens Hall Chickfila Renovations_Project Manual.pdf	PDF	Feb 11, 2025
IFB 306852501_Addendum 1.pdf	PDF	Feb 4, 2025
IFB 306852501_Addendum 2.pdf	PDF	Feb 4, 2025
IFB 306852501_Owens Hall Chickfila Renovations_Project Manual.pdf	PDF	Feb 4, 2025
IFB 306852501_Owens Hall Chickfila Renovations_Project Manual.pdf	PDF	Jan 29, 2025
VT Owens Hall Chick-fil-A Renovations UBO Review Drawings_HFR Review 12-09-24 (002).pdf	PDF	Jan 29, 2025
IFB 306852501_Addendum 1.pdf	PDF	Jan 29, 2025
VT Owens Hall Chick-fil-A Renovations UBO Review Drawings_HFR Review 12-09-24 (002).pdf	PDF	Jan 15, 2025
IFB 306852501_Owens Hall Chickfila Renovations_Project Manual.pdf	PDF	Jan 15, 2025

Show all 18

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

LOCATION MAP:

O W

E N

S H

C H

-F

-A R

E N

O V

A T

SOUTHGATE DRIVE

TECH

VIRGINIA

ROAD

AIN STREET

AIR

R T

460 BYPASS

U .S. R

O U

TECH

CORPORATE

PRICESFORK

R O

DRIL

FIE

AIRPORT

VIRGINIA

RESEARCH

CENTER

ASHIN

GTON S

TREET

EST CAM

D R

N O

R T

H D

RAPER RD

ROANOKE ST.

SEAL:

CODE INFORMATION: INDEX OF DRAWINGS:

Inc.

Alliance Architects The

ARCHITECT:

APPLICABLE CODES:

USE GROUP:

CONSTRUCTION CLASSIFICATION:

VUSBC OCCUPANCY:

DESIGN LIVE LOADS:

TOTAL BUILDING FLOOR AREA:

TOTAL RENOVATION AREA:

FIRE SUPPRESSION SYSTEM:

FIRE ALARM SYSTEM:

T1 LOCATION MAP, CODE INFORMATION, HAZARDOUS MATERIALS NOTES

LS1 KEY PLANS, CODE ANALYSIS NOTES, SCHEDULES

D1 FLOOR PLAN - EXISTING CONDITIONS & DEMOLITION, DEMOLITION NOTES

D2 REFLECTED CEILING PLAN - EXISTING CONDITIONS & DEMOLITION

A1 PARTIAL FIRST FLOOR DIMENSIONAL PLAN, NOTES

A1.1 WALL TYPE DETAILS, FINISH SCHEDULE, DOOR SCHEDULE, DOOR DETAILS, NOTES

A2 PARTIAL FIRST FLOOR REFLECTED CEILING PLAN

A3 PARTIAL FIRST FLOOR KITCHEN EQUIPMENT PLAN

A3.1 KITCHEN EQUIPMENT SCHEDULE

A4 INTERIOR ELEVATIONS

A5 INTERIOR ELEVATIONS

A6 SECTIONS & DETAILS

A7 DETAILS

A8 EQUIPMENT DETAILS

A9 OUTLINE SPECIFICATIONS

A10 OUTLINE SPECIFICATIONS

MD1 PARTIAL FIRST FLOOR PLAN - MECHANICAL DEMOLITION, NOTES

M1 PARTIAL FIRST FLOOR PLAN - MECHANICAL

M2 MECHANICAL OUTLINE SPECIFICATIONS, LEGENDS

PD1 PARTIAL FIRST FLOOR PLAN - PLUMBING DEMOLITION, DEMOLITION NOTES

P1 PARTIAL FIRST FLOOR PLAN - PLUMBING, NOTES

P2 PLUMBING OUTLINE SPECIFICATIONS, LEGENDS

ED1 ELECTRICAL FLOOR PLAN - EXIST. CONDITIONS/DEMOLITION, NOTES

ED2 ELECTRICAL REFLECTED CEILING PLAN - EXIST. CONDITIONS/DEMOLITION

ED3 EXISTING PANEL SCHEDULES

E1 ELECTRICAL NOTES, ELECTRICAL OUTLINE SPECIFICATIONS

E2.1 PARTIAL FIRST FLOOR POWER PLAN

E2.2 EQUIPMENT LIST - ELECTRICAL

E3 PARTIAL FIRST FLOOR REFLECTED CEILING PLAN - ELECTRICAL

E4 MODIFIED PANEL SCHEDULES

LEAD-CONTAINING MATERIALS NOTES:

ASBESTOS-CONTAINING MATERIALS NOTES:

ASBESTOS-CONTAINING MATERIALS OR PAINTS CONTAINING LEAD SHALL NOT BE USED IN ANY FORM ON STATE PROPERTY (VA TECH).

ALL INFORMATION RELATED TO ASBESTOS-CONTAINING AND LEAD-CONTAINING MATERIALS IS PROVIDED BY VIRGINIA TECH SAFETY COMPLIANCE OFFICER, WHO SHALL BE CONTACTED FOR ALL DETAILS AND PROCEDURES RELATED TO SUCH MATERIALS, AT 540.231.9397.

OWENS HALL CHICK-FIL-A RENOVATIONS

Gibson Engineering, LLC

ELECTRICAL ENGINEER:

Mann & Associates Inc.

MECHANICAL ENGINEER:

AN ASBESTOS INSPECTION HAS BEEN PERFORMED BY THE OWNER. A COPY OF THE ASBESTOS SURVEY/INSPECTION REPORT IS PROVIDED IN THE BID DOCUMENTS. IF A SUSPECT ASBESTOS-CONTAINING MATERIAL IS ENCOUNTERED IN THE COURSE OF THIS WORK, WORK SHALL STOP IMMEDIATELY AND THE SAFETY COMPLIANCE OFFICER SHALL BE CONTACTED AT 540.231.9397.

AN INSPECTION TO IDENTIFY LEAD-CONTAINING OR COATED BUILDING COMPONENTS HAS BEEN CONDUCTED. A COPY OF THE SURVEY/INSPECTION REPORT IS PROVIDED IN THE BID DOCUMENTS. THIS REPORT IS PROVIDED FOR THE CONTRACTOR'S USE AND MAY NOT BE ALL-INCLUSIVE. IT IS THE CONTRACTOR'S RESPONSIBILITY TO COMPLY WITH ALL VIRGINIA OCCUPATIONAL SAFETY & HEALTH REGULATIONS AS THEY PERTAIN TO EMPLOYEE EXPOSURES TO LEAD. IF A SUSPECT LEAD-CONTAINING MATERIAL IS ENCOUNTERED IN THE COURSE OF THIS WORK, WORK SHALL STOP IMMEDIATELY AND THE SAFETY COMPLIANCE OFFICER SHALL BE CONTACTED AT

540.231.9397. ALL LEAD AND LEAD-COATED BUILDING COMPONENTS SHALL BE RECYCLED TO THE EXTENT POSSIBLE.

2021 Virginia Uniform Statewide Building Code (VUSBC), Part II, adopted January 18, 2024, also known as the 2021 Virginia Existing Building Code (VEBC - Level 2 Alteration), and incorporating the 2021 International Building Codes with Virginia amendments

Americans with Disabilities Act 2010 ADA Standards for Accessible Design (ADA 2010), published September 15, 2010, and adopted March 1, 2011

Virginia Accessibility Code 2017 Virginia Plumbing Code 2021 Virginia Mechanical Code 2021 Virginia Electrical Code 2020 VT Construction and Professional Services Manual (CPSM), 2020 Edition, adopted January 24, 2020 VT Design and Construction Standards, effective July 1, 2023

B (Business), A2 (Assembly) - Non Separated Mixed Use - Unchanged IIB - Unchanged Unchanged

Not Applicable - No Structural Modifications required for this Project

97,688± GSF

1,200± GSF

Automatic Fire Extinguishing System (at Kitchen Exhaust Hoods) Automatic Fire Alarm System

DATE:

TAA PROJECT NO.: 96554

November 20, 2024

Virginia Polytechnic Institute & State University Commonwealth of Virginia 150 Kent Street, Blacksburg, VA 24061 VT Building #: 0195 VT Work Order #: ______

VT IFB #: _________

UBO NOTATION:

PROJECT

SITE

SHANE LARKIN

Lic. No. 016372

UBO REVIEW DRAWINGS

306852501 25-688542 dquick HFR Submittal

Blacksburg, Alliance Architects

Virginia

DATE:

PROJECT NO:

Inc.

The

CHECKED BY:

DRAWN BY:

K E

Y P

S , C

O D

E A

N A

O T

E S

, S C

H E

D U

O W

E N

S H

A L

L C

K −F

−A

R E

N O

V A

N S

T E

C H

U T

S T

A T

E U

E R

SLL

96554

11/20/24

LS1

1/16" = 1'-0"

0 2 4 6 10 20 40

KEY PLAN NOTES:

1. KEY PLAN DRAWINGS ARE SCHEMATIC, AND

ARE NOT DRAWN ACCURATELY TO SCALE. SEE

EXISTING CONDITIONS/DEMOLITION FLOOR

PLANS ON SHEETS D1 & D2 FOR MORE DETAILS

OF EXISTING CONDITIONS.

UBO NOTATION:

100D

100J

B25

B5B6

107B

107A

107C

B10

B12

B11

B13

B14

B15

114A

114B

B16

B17

100A 100B

100H

100F

100E

B21

B26

100C

100K

B22

100G

B24

100L

B29

101E 101D 101B

101C

104 102 102

B27B31

L O

A D

D O

C K

B23

B20

B19

B18

113A

101F

B32

B20A

B5A

103C 103B

103A

115A

108A

101A

117A

101G

113B

B33

DNUP

UP UP

102104

103B1

103B3

103B2

SCALE: 1/16"=1'-0"

FIRST FLOOR KEY PLANPLAN

NORTH

CODE ANALYSIS NOTES:

1. THE EXISTING BUILDING USE GROUP OF B AND A2 IS NOT CHANGED BY THIS PROJECT.

2. THE EXISTING BUILDING CONSTRUCTION CLASSIFICATION (ASSUMED IIB) IS NOT CHANGED BY

THIS PROJECT.

3. THE EXISTING BUILDING HEIGHT AND AREA ARE NOT CHANGED BY THIS PROJECT.

4. THE EXISTING BUILDING IS NOT SPRINKLERED. THE EXISTING BUILDING HAS AN AUTOMATIC

FIRE ALARM SYSTEM, WHICH WILL BE RE-CONFIGURED WITHIN THE RENOVATION AREAS AS

REQD. FOR COMPLIANCE WITH THE 2021 VCC.

5. THE CORRIDOR WALLS ARE REQD. TO HAVE A 1 HOUR FIRE RATING UNDER CURRENT CODE

(VCC TABLE 1020.1). THE RENOVATION AREA DOES NOT INCLUDE ANY CORRIDORS AND IS NOT

ADJACENT TO ANY CORRIDOR WALLS.

6. FLOOR ASSEMBLIES ARE NOT REQUIRED TO BE FIRE-RATED UNDER TYPE IIB CONSTRUCTION

(VCC TABLE 601). ALL EXIST. AND NEW FLOOR AND CEILING PENETRATIONS LOCATED IN

RENOVATED SPACES OR CHASES OR INSIDE WALLS THAT ARE ACCESSIBLE DURING THE WORK

OF THIS PROJECT WILL BE SEALED AGAINST THE PASSAGE OF FLAME OR SMOKE (VCC 714.6.1).

THROUGH-PENETRATION FIRESTOPPING ASSEMBLIES ARE NOT REQD.

7. THE 2021 VIRGINIA EXISTING BUILDING CODE (VEBC) IS APPLICABLE TO THIS PROJECT. THIS

PROJECT HAS BEEN DESIGNED AS A LEVEL 2 ALTERATION (VEBC 601.2.2). THE FOLLOWING

VEBC SECTIONS ARE PERTINENT TO THIS PROJECT:

A. 302.1: NEW MATERIALS WILL COMPLY WITH THE 2021 VCC.

B. 404.1: RENOVATIONS WILL MAINTAIN OR IMPROVE THE CURRENT LEVEL OF ACCESSIBILITY.

C. 404.3: THE ALTERATIONS INCLUDE AN AREA CONTAINING A "PRIMARY FUNCTION".

IMPROVEMENTS TO THE ACCESSIBLE ROUTE SERVING THE RENOVATION AREAS,

INCLUDING IMPROVEMENTS TO THE EXIST. TOILET FACILITIES AND WATER COOLERS HAVE

BEEN MADE AS A PART OF AN EARLIER RENOVATION.

D. 601.2.2: THIS PROJECT IS A LEVEL 2 ALTERATION, AS DEFINED IN THIS SECTION.

E. 601.4.6.1: ALTERED COMMERCIAL LIGHTING SHALL COMPLY WITH SECTION C405 OF THE

VECC. SEE ELECTRICAL SHEETS.

F. 602.2: EXISTING LEVELS OF FIRE PROTECTION AND MEANS OF EGRESS PROTECTION WILL

BE MAINTAINED.

G. 602.3: NEW BUILDING ELEMENTS, MATERIALS & METHODS WILL COMPLY WITH THE 2021

VCC.

H. 603.3: NEW CONSTRUCTION COMPONENTS, SYSTEMS & SPACES WILL COMPLY WITH THE

2021 VCC.

I. 603.5: MECHANICAL EXHAUST & VENTILATION AIR IS PROVIDED IN COMPLIANCE WITH THE

2021 VMC. SEE MECHANICAL SHEETS.

8. NO CORRIDORS WITH AN OCCUPANT LOAD GREATER THAN 30 ARE LOCATED WITHIN OR

ADJACENT TO THE RENOVATED AREA. FIRE RESISTANCE RATED CORRIDOR WALLS ARE NOT

REEQUIRED (VCC 1020.1 & TABLE 1020.2

9. EXISTING BUILDING OUTSIDE THE WORK AREA IS NOT RENOVATED FOR COMPLIANCE WITH

VIRGINIA ENERGY CONSERVATION CODE.

10. PORTABLE FIRE EXTINGUISHERS ARE NOT INCLUDED IN THIS PROJECT. PORTABLE FIRE

EXTINGUISHERS WILL BE PROVIDED BY THE OWNER.

11. STRUCTURAL AND SPECIAL INSPECTIONS ARE NOT REQUIRED FOR THE WORK OF THIS

PROJECT, AS STRUCTURAL MODIFICATIONS REQUIRING INSPECTIONS ARE NOT INCLUDED IN

THE WORK (VCC SECTION 1705).

SEE ENLARGED PLANS ON

ENGINEERING SHEETS

SERVING

103B5

KITCHEN

115B

KITCHEN

PASSAGE

103B4

43B

A25

18A5A7BA7

A26 A27

A10

41B

41C

41D

RAMP

8B 8C

19A

A7A

9A 9D

16A

41D1

A27B

A26A

41E

DN DN

DN UP

DNDN

A26B

41D2

41CR

SCALE: 1/16"=1'-0"

PARTIAL BASEMENT KEY PLANPLAN

NORTH

Lic. No. 016372

UBO REVIEW DRAWINGS

BUSINESS AREAS

PROJECT OCCUPANT SCHEDULE

SERVING

OF SPACE

195 GSF

KITCHEN COMMERCIAL KITCHEN 740 GSF

FUNCTION

NUMBER

SPACE

150 GROSS

PER OCCUPANT

200 GROSS

FLOOR AREA AREA

2 OCCUPANTS

LOAD

OCCUPANT

103B5

115B 4 OCCUPANTS

6 OCCUPANTS2035 SF

FIRE RESISTANCE RATING OF BUILDING ELEMENTS

BUILDING ELEMENT

PRIMARY STRUCTURAL FRAME 0

BEARING WALLS - EXTERIOR

FLOOR CONSTRUCTION

HOURS

NONBEARING WALLS - EXTERIOR

ROOF CONSTRUCTION

NONBEARING WALLS - INTERIOR

BEARING WALLS - INTERIOR

CORRIDOR WALLS - OCCUPANT LOAD GREATER THAN 30 (VCC 1020.1 & TABLE 1020.2) 1

(FROM VCC TABLE 601)

1. PROJECT OCCUPANT SCHEDULE CONTAINS AREA CALCULATIONS IMPACTING OCCUPANCY ONLY; SOME AREAS ARE LISTED AS NET

AREA CALCULATIONS. SEE T1.1 FOR TOTAL PROJECT AREA.

NAME

SPACE

CLASSIFICATION

USE

SEE ENLARGED PLANS ON

SHEETS D1, D2, A1, A2,

A3, & ENGINEERING

SHEETS

CORRIDOR WALLS - OCCUPANT LOAD LESS THAN 30 (VCC 1020.1 & TABLE 1020.2) 0

REMOVE EXIST.

VCT FLOORING

REMOVE EXIST. FLOOR

TILE & TILE BASE

REMOVE EXIST.RESINOUS

FLOOR COATING

SCALE: 1/4"=1'-0"

PARTIAL FIRST FLOOR PLAN - EXISTING CONDITIONS & DEMOLITION

Blacksburg, Alliance Architects

Virginia

DATE:

PROJECT NO:

Inc.

The

CHECKED BY:

DRAWN BY:

96554

11/20/24

SLL

DAR / SLL

C H

−F

−A R

E N

O V

A T

S O

W E

N S

H A

L L

V irg in ia

T e ch

B la ck sb u rg

, V irg in ia

O R

E X

C O

N D

N S

E M

N , D

E M

N N

O T

E S

PLAN

NORTH

DEMOLITION PLAN NOTES:

1. SEE IMPORTANT NOTES ON SHEET T1 REGARDING ASBESTOS-CONTAINING AND

LEAD-CONTAINING MATERIALS.

2. DRAWING IS BASED ON ROUGH FIELD MEASUREMENTS. VERIFY ALL DIMENSIONS & DETAILS IN

THE FIELD.

3. ALL EXIST. PIPING, DUCTWORK & ELECTRICAL IS NOT SHOWN. PROVIDE MISC. DEMOLITION AS

REQD. FOR PROPER INSTALLATION OF THE WORK OF THIS CONTRACT, INCL. ELECTRICAL &

PLUMBING WORK. PERFORM ALL CUTTING, DRILLING & PATCHING REQUIRED FOR

INSTALLATION OF PROPOSED SYSTEMS. SEE HVAC, ELECTRICAL & PLUMBING DRAWINGS FOR

ADDITIONAL DEMOLITION WORK.

4. REMOVE ALL EXIST. FASTENERS, ANCHORS, HANGERS, CEILING SUPPORTS,

SURFACE-MOUNTED COMPONENTS, ABANDONED WIRING AND CONDUITS, ABANDONED

PIPING, ABANDONED DUCTWORK, ABANDONED EQUIPMENT, AND ALL OTHER COMPONENTS

NOT REQD. FOR THE PROPOSED CONSTRUCTION. THESE DRAWINGS DO NOT PURPORT TO

SHOW ALL MISC. DEMOLITION. VERIFY THE SCOPE OF MISC. DEMOLITION WORK IN THE FIELD.

5. ALL WALLS ARE MTL. STUDS & GYP. BD., UNLESS NOTED OTHERWISE.

6. COMPLETELY REMOVE ALL EXIST. WALL COVERINGS, CHAIR RAIL, & CORNER GUARDS IN ALL

SPACES, UNLESS NOTED OTHERWISE. PATCH, REPAIR & PREPARE WALL SURFACES AS

REQUIRED TO RECEIVE THE SPECIFIED FINISHES.

7. USE EXTREME CARE TO PREVENT DAMAGE TO EXIST. MATERIALS SCHEDULED TO REMAIN.

REPAIR OR REPLACE ALL DAMAGED EXIST. MATERIALS.

DEMO PLAN LEGEND

EXIST. WALL TO REMAIN

ITEMS TO BE REMOVED SHOWN

DASHED

GYP. BD. WALL TO BE REMOVED

CFA

HG-1

DHG

HG-2

HG-5

EXIST. PARTIAL HGT. WALL TO REMAIN

REMOVE EXIST. CERAMIC

TILE WALL FINISH &

CEMENT BD. BACKER

REMOVE EXIST. STAINLESS

STL. WALL PANELS

REMOVE EXIST.

SOUND PANELS

UBO NOTATION:

1/2" = 1'-0"

0 2 53

UBO REVIEW DRAWINGS

Lic. No. 016372

EXIST. GLASS-FRONT

BEVERAGE REFRIG. TO

REMAIN (TYP. FOR 4)

REMOVE CMU AS REQD.

FOR PROPOSED DUCT

PENETRATION - SEE MECH.

EXIST. ELECT. PANELBOARD

TO REMAIN

REMOVE EXIST.

DOOR FRAME

REMOVE EXIST.

CASEWORK

REMOVE EXIST.

CASEWORK

REMOVE EXIST.

CASEWORK

REMOVE EXIST. CASEWORK

REMOVE EXIST. CERAMIC

TILE WALL FINISH &

CEMENT BD. BACKER

CAREFULLY COORD. EXTEND OF

VCT DEMOLITION W/ PROPOSED

WALL & FLOORING LOCATIONS (TYP.)

REMOVE EXIST. TILE BASE

EXIST. FLOOR DRAIN - SEE

PLUMB.

REMOVE EXIST.

BUILT-IN SEATING

SCALE: 1/2"=1'-0"

REFLECTED CEILING PLAN - EXISTING CONDITIONS & DEMOLITION

Blacksburg, Alliance Architects

Virginia

DATE:

PROJECT NO:

Inc.

The

CHECKED BY:

DRAWN BY:

96554

11/20/24

SLL

DAR / SLL

C H

−F

−A R

E N

O V

A T

S O

W E

N S

H A

L L

V irg in ia

T e ch

B la ck sb u rg

, V irg in ia

R E

C T

E D

C E

G P

G C

O N

D E

M O

PLAN

NORTH

BULKHEAD @ ±9'-0"

AFF (TYP. U.N.O.)

BULKHEAD @

±83" AFF

WALL-MTD.

LIGHT FIXTURE

BULKHEAD @ ±83" AFF

ACOUST. CLG. @

±9'-6" AFF

ACOUST. CLG. @

±12'-0" AFF

EXIST. MECH. REGISTERS

EXIST. LIGHT FIXTURES

EXIST. CAN LIGHT FIXTURE

EXIST. SMOKE DETECTOR

EXIST. CLG.-MTD. FIRE ALARM STROBE

EXIST. WALL-MTD. FIRE ALARM STROBE

EXIST. WALL-MTD. EMERGENCY LIGHT

EXIST. WALL-MTD. LIGHT FIXTURE

EXIST. HOOD - SEE

MECH.

DEMO RCP LEGEND

1/2" = 1'-0"

0 2 53

UBO NOTATION:

UBO REVIEW DRAWINGS

REMOVE SUSP. BULKHEAD

AS REQD. FOR GREASE DUCT

MODIFICATIONS - SEE MECH.

EXIST. GREASE

DUCT - SEE MECH.

REMOVE EXIST.

WALL-MTD. LIGHT

FIXTURE - SEE ELECT.

Lic. No. 016372

PARTIAL FIRST FLOOR DIMENSIONAL PLAN

Blacksburg, Alliance Architects

Virginia

DATE:

PROJECT NO:

Inc.

The

CHECKED BY:

DRAWN BY:

96554

11/20/24

SLL

DAR / SLL

C H

−F

−A R

E N

O V

A T

S O

W E

N S

H A

L L

V irg in ia

T e ch

B la ck sb u rg

, V irg in ia

P A

R T

S T

O R

E N

N A

L P

, N O

T E

PLAN

NORTH

Lic. No. 016372

1/2" = 1'-0"

0 2 53

CFA

HG-1

DHG

HG-2

HG-4

ACCESS.

HAND SINK

EXIST. ELECT.

PANELBOARD

UBO NOTATION:

UBO REVIEW DRAWINGS

SERVING

103B5

KITCHEN

115B

KITCHEN

PASSAGE

103B4

EXIST. GLASS DOOR

DISPLAY REFRIGERATOR

TO REMAIN (TYP. FOR 4)

EXIST. ELECT.

PANELBOARD

3 5/8" 3'-3" 3 5/8"

15'-6"± 3 5/8"

'-7

'-6

'-4

'-1

'-0

4'-0"±

29'-1 1/2"± 3 5/8"

1'-5"± 3 5/8"

TOOTH CMU INTO

EXIST. MASONRY

WALL

PROVIDE DOOR &

FRAME IN EXIST.

MASONRY OPENING

3 5/8" 3'-3"

ALIGN MTL. STUD

W/ FACE OF EXIST.

MASONRY

ALIGN MTL. STUD

W/ FACE OF EXIST.

MASONRY

INSTALL CURB FLUSH

W/ OUTER FACE OF

WALL SHEATHING

3 5/8" 1'-5"±3 5/8"

CMU & CONC. LINTEL @

PROPOSED ROUND DUCT

PENETRATION - SEE MECH.

INFILL W/ CMU WHERE

DUCTWORK IS

REMOVED - SEE MECH.

'-0

'-7

'-4

-4

'-7

'-9

'-1

ALIGN OUTER FACE OF MTL.

STUD FRAMING W/ EDGE OF

EXIST. FRAMING

'-4

'-5

'-8

ALIGN OUTER FACE OF MTL.

STUD FRAMING W/ EDGE OF

EXIST. FRAMING

1'-9"

1'-0"

EXIST. CMU WALL

EXIST. WALL

FINISH TO REMAIN

P1 P1

P3 P3

P5P5P5 P5 18"

EXTEND STAINLESS

STL. WALL PANELS

18" PAST EDGE OF

EXHAUST HOOD

ABOVE (DASHED)

EXTEND STAINLESS STL.

WALL PANELS 18" PAST

EDGE OF EXHAUST HOOD

P4P4P4

PROPOSED METAL STUD WALL

DIMENSIONAL PLAN LEGEND

EXIST. WALL TO REMAIN

000 ROOM NUMBER - SEE FINISH SCHEDULE

CONC. MASONRY WALL REPAIR

ELECT. PANEL - SEE ELECT.

1. VERIFY ALL EXIST. DIMENSIONS IN THE FIELD & VERIFY THE LAYOUT OF THE MTL. STUD PARTITIONS AS INDICATED ON THE DIMENSIONAL PLANS. REPORT ALL DISCREPANCIES FROM DIMENSIONAL PLANS TO THE A/E, PRIOR TO CONSTRUCTION OF MTL. STUD PARTITIONS. DIMENSIONS NOTED TO BE "CLR." ARE TAKEN FROM

FINISHED SURFACE TO FINISHED SURFACE.

2. PLAN DIMENSIONS INDICATED ARE TAKEN TO ONE OF THE FOLLOWING: (1) THE FACE OF THE EXIST.

CONCRETE MASONRY PARTITIONS, (2) THE FACE OF THE NEW MTL. FRAMING, OR (3) THE FACE OF OUTER LAYER OF WALL SHEATHING. PLAN DIMENSIONS ARE NOT TAKEN TO THE FACE OF THE CERAMIC TILE.

3. METAL STUD FRAMING IS 3 5/8" DEEP, UNLESS OTHERWISE DIMENSIONED ON THE PLANS.

4. SEE WALL TYPE DETAILS FOR NUMBERS & TYPES OF WALL SHEATHING LAYERS REQUIRED.

DIMENSIONAL PLAN NOTES:

PROPOSED METAL STUD WALL W/ ACOUSTICAL

BATT INSULATION

WALL SHEATHING TYPE - SEE WALL TYPE DETAILSP#

PT WD. CURB

2'-1 1/2"

A A1A4

B A1A4

C A1A4

D A1A4

E A1A4

F A1A5

G A1A5

H A1A5

K A1A5

J A1A5

L A1A5

M A1A5

N A1A5

103B dquick Cloud+ dquick Cloud+ THIS FOOTPRINT DOESN'T MATCH THE APPROVED SUP 1.4. THIS LAYOUT WILL NEED CFA DESIGN'S APPROVAL ADDITIONAL SPACE dquick Cloud+ dquick Cloud+

SWING GATE NEEDS TO FLIP TO MATCH SUP 1.4

WALL TYPE DETAILS

Blacksburg, Alliance Architects

Virginia

DATE:

PROJECT NO:

Inc.

The

CHECKED BY:

DRAWN BY:

A1.1

96554

11/20/24

SLL

DAR / SLL

C H

−F

−A R

E N

O V

A T

S O

W E

N S

H A

L L

V irg in ia

T e ch

B la ck sb u rg

, V irg in ia

W A

Y P

E D

E T

Lic. No. 016372

1/2" = 1'-0"

0 2 53

UBO NOTATION:

UBO REVIEW DRAWINGS

S E

E D

O O

R S

C H

E D

SEE DOOR

SCHEDULE

HOLLOW METAL

FRAME

DOOR TYPES

KICK PLATE

CEILING

FINISH SCHEDULE

FLOOR BASE WALLS REMARKS

SPACE NAME &

NO.

CEILING

HEIGHT

-DINING 103 EXIST.EXIST. EXIST. -

-VENDING 103B ACOUST.EXIST. VCT TILETILE 12'-0"±

-PASSAGE 103B4 EX. ACOUST.EXIST. EXIST.EXIST. -

1. PROVIDE VCT, BASE, SUSPENDED ACOUSTICAL CEILINGS & PAINT TO MATCH EXISTING AT

ALL WALL & CEILING LOCATIONS ADJACENT TO THE RENOVATED AREA.

FINISH SCHEDULE NOTES:

1. DOOR HARDWARE IS NOT SHOWN ON ELEVATIONS.

DOOR SCHEDULE NOTES:

REMARKSELEV. MAT'LNO. SIZE

102 A

DOOR SCHEDULE

3'-0" x 2'-10" WOOD

WOOD - -3'-0" x 7'-0"

JAMB HEAD

SILL

SET

HDW.

FRAME

CASEWK.

H.M.

101 B WOOD -3'-0" x 7'-0" ---H.M.

VCT

5/8" FRT PLYWD.

SUSPENDED CEILING OR

GYP. BD. - SEE SCHED.

EXTEND FRT PLYWD. & CEMENT

BACKERBOARD 6" ABOVE

SUSPENDED CEILING

5/8" CEMENT BACKERBOARD

BELOW PLYWD. - EXTEND 18"

ABOVE FLOOR SLAB

VCT

SUSPENDED CEILING OR

GYP. BD. - SEE SCHED.

EXTEND CEMENT

BACKERBOARD 6" ABOVE

SUSPENDED CEILING

5/8" CEMENT BACKERBOARD

WALL TILE - SEE SCHED.

COVE TILE BASE - SEE SCHED. COVE TILE BASE - SEE SCHED.

WALL TILE - SEE SCHED.

FLOOR TILE - SEE SCHED.

5/8" FRT PLYWD.

SUSPENDED CEILING OR

GYP. BD. - SEE SCHED.

EXTEND FRT PLYWD. & FRP 6"

ABOVE SUSPENDED CEILING

5/8" CEMENT BACKERBOARD

BELOW PLYWD. - EXTEND 18"

ABOVE FLOOR SLAB

FRP - SEE SCHED.

COVE TILE BASE - SEE SCHED.

EXTEND WATERPROOFING

MEMBRANE UP WALL 12" MIN.

CONT. WATERPROOFING MEMBRANE

EXTEND FRP 1" BEHIND COVE BASE

PROVIDE CONT. TRIM @

INTERSECTION OF FRP W/

GYP. BD. CEILINGS

EXIST. FLOOR TILE

SEE FLOOR PLAN FOR ADDITIONAL

MASONRY & WALL FRAMING

LOCATIONS & REQUIREMENTS

5/8" FRT PLYWD.

FRT PLYWD. & FRP TERMINATE

12'-0" AFF

5/8" CEMENT BACKERBOARD

BELOW PLYWD. - EXTEND 18"

ABOVE FLOOR SLAB

FRP - SEE SCHED.

COVE TILE BASE - SEE SCHED.

EXTEND FRP 1" BEHIND COVE BASE

PROVIDE CONT. TRIM @

INTERSECTION OF FRP W/

GYP. BD. CEILINGS

FLOOR TILE - SEE SCHED.

5/8" CEMENT BACKERBOARD

SUSPENDED CEILING OR

GYP. BD. - SEE SCHED.

EXTEND CEMENT

BACKERBOARD 24" ABOVE

SUSPENDED CEILING

STAINLESS STL. WALL

PANELS

COVE TILE BASE - SEE SCHED.

EXTEND WATERPROOFING

MEMBRANE UP WALL 12" MIN.

CONT. WATERPROOFING MEMBRANE

PROVIDE CONT. TRIM @

INTERSECTION OF

STAINLESS STL. PANELS

W/ CEILING

PROVIDE CONT. TRIM @

TOP OF PLYWD. & FRT

SEE FLOOR PLAN FOR ADDITIONAL

MASONRY & WALL FRAMING

LOCATIONS & REQUIREMENTS

SEE FLOOR PLAN FOR ADDITIONAL

MASONRY & WALL FRAMING

LOCATIONS & REQUIREMENTS

SEE FLOOR PLAN FOR ADDITIONAL

MASONRY & WALL FRAMING

LOCATIONS & REQUIREMENTS

SEE FLOOR PLAN FOR ADDITIONAL

MASONRY & WALL FRAMING

LOCATIONS & REQUIREMENTS

GYP. BD. CEILING - SEE SCHED.

5/8" CEMENT BACKERBOARD

WALL TILE - SEE SCHED.

SEE FLOOR PLAN FOR ADDITIONAL

MASONRY & WALL FRAMING

LOCATIONS & REQUIREMENTS

FLOOR TILE - SEE SCHED.

COVE TILE BASE - SEE SCHED.

EXTEND WATERPROOFING

MEMBRANE UP WALL 12" MIN.

CONT. WATERPROOFING MEMBRANE

GYP. BD. CEILING - SEE SCHED.

5/8" CEMENT BACKERBOARD

WALL TILE - SEE SCHED.

SEE FLOOR PLAN FOR ADDITIONAL

MASONRY & WALL FRAMING

LOCATIONS & REQUIREMENTS

FLOOR TILE - SEE SCHED.

COVE TILE BASE - SEE SCHED.

EXTEND WATERPROOFING

MEMBRANE UP WALL 12" MIN.

CONT. WATERPROOFING MEMBRANE1

5/8" FRT PLYWD.

5/8" CEMENT BACKERBOARD

BELOW PLYWD. - EXTEND 18"

ABOVE FLOOR SLAB

GYP. BD. CEILING - SEE SCHED.

(2) LAYERS 5/8" CEMENT

BACKERBOARD

WALL TILE - SEE SCHED.

SEE FLOOR PLAN FOR ADDITIONAL

MASONRY & WALL FRAMING

LOCATIONS & REQUIREMENTS

FLOOR TILE - SEE SCHED.

COVE TILE BASE - SEE SCHED.

EXTEND WATERPROOFING

MEMBRANE UP WALL 12" MIN.

CONT. WATERPROOFING MEMBRANE1

5/8" FRT PLYWD.

5/8" CEMENT BACKERBOARD

BELOW PLYWD. - EXTEND 18"

ABOVE FLOOR SLAB

NOTE: OMIT COVE TILE BASE

WHERE CASEWORK CURB OCCURS

NOTE: OMIT COVE TILE BASE

WHERE CASEWORK CURB OCCURS

MATCH HEIGHT OF EXIST. DINING AREA BULKHEADSSERVING 103B5 GYP. BD.TILE TILETILE 9'-1"±

-KITCHEN 107 ACOUST.EXIST. EXIST.EXIST. -

-KITCHEN 115 EXIST.EXIST. TILE -

-KITCHEN 115B ACOUST.TILE FRPTILE 9'-6"

EXIST.

TILE

EXIST.

FRP

TILE

EXIST.

ST. STL/FRP

GYP. BD.

TILE

EXIST.

TILE

EXIST,

ST. STL/FRP

S E

E D

O O

R S

C H

E D

SEE DOOR

SCHEDULE

NORTH EAST SOUTH WEST

EXIST. EXIST. EXIST.

PARTIAL FIRST FLOOR REFLECTED CEILING PLAN

Blacksburg, Alliance Architects

Virginia

DATE:

PROJECT NO:

Inc.

The

CHECKED BY:

DRAWN BY:

96554

11/20/24

SLL

DAR / SLL

C H

−F

−A R

E N

O V

A T

S O

W E

N S

H A

L L

V irg in ia

T e ch

B la ck sb u rg

, V irg in ia

P A

R T

S T

O R

R E

C T

E D

C E

G P

PLAN

NORTH

Lic. No. 016372

1/2" = 1'-0"

0 2 53

260/R

269/R

266/R

211B

UBO NOTATION:

UBO REVIEW DRAWINGS

SERVING

103B5

KITCHEN

115B

KITCHEN

PASSAGE

103B4

270/R

ACOUST. CLG. @

±12'-0" AFF

REMOVE & REINSTALL SUSP.

BULKHEAD AS REQD. FOR

GREASE DUCT MODIFICATIONS -

SEE MECH.

GYP. BD. CLG.

@ 9'-6" AFF

POWER DROP -

SEE ELECT.

PARTIAL FIRST FLOOR KITCHEN EQUIPMENT PLAN

Blacksburg, Alliance Architects

Virginia

DATE:

PROJECT NO:

Inc.

The

CHECKED BY:

DRAWN BY:

96554

11/20/24

SLL

DAR / SLL

C H

−F

−A R

E N

O V

A T

S O

W E

N S

H A

L L

V irg in ia

T e ch

B la ck sb u rg

, V irg in ia

C H

E N

E Q

M E

N T

PLAN

NORTH

Lic. No. 016372

1/2" = 1'-0"

0 2 53

CFA

HG-1

DHG

HG-2

HG-4

200S/R

200U/R

187A

182L

310/R

315W

102C

202A

355F

703L

703M

703S

187C

182L

187D

703S

703M

703L

308E

187B

420/R

300A

301C 182L

300B

300DL

300F

300X

300C 500A/R

122A

182L

120A

187F

438L

564A

420L/R

562A/R

580H

105D

563DL

563DA

105A

560A

187E

522L/R

260/R

522L/R

400L

269/R

562AT/R

1242S

580HT

122B

1242AS

121B

564AT

187G

503B 503T

422A 1114 1244S 443GLT

505VLT

505VA

266/R 524/R 523/R 523/R 523/R 523/R581/R 270R

1336 1336 1336

444D 444D/R 444SL/R

1374 431

1384 570

1141G

600A

1330 1332

305/R

620L

211B

1141F

1382 1372F

440C 202A

1382 1372F

440C

442WC

359L

360F

660 202

ACCESS.

HAND SINK

360F

359L

1141F

631M

1371F

EXIST. ELECT.

PANELBOARD TO

REMAIN

UBO NOTATION:

UBO REVIEW DRAWINGS

SERVING

103B5

KITCHEN

115B

KITCHEN

PASSAGE

103B4

EXIST. GLASS DOOR

DISPLAY REFRIGERATOR

TO REMAIN (TYP. FOR 4)

EXIST. ELECT.

PANELBOARD TO

REMAIN

1. SEE KITCHEN EQUIPMENT SCHEDULE ON SHEET A3.1.

KITCHEN EQUIPMENT PLAN NOTES:

dquick Snapshot dquick Cloud+ dquick Cloud+

MISSING COFFEE WARMER FROM PLAN, SHOWN IN ELEVATION; CHECK AGAINST SUP 1.4

Architects

Virginia

DATE:

PROJECT NO:

Inc.

The

CHECKED BY:

DRAWN BY:

A3.1

96554

11/20/24

SLL

DAR / SLL

C H

−F

−A R

E N

O V

A T

S O

W E

N S

H A

L L

V irg in ia

T e ch

B la ck sb u rg

, V irg in ia

E Q

M E

N T

S C

H E

D U

Lic. No. 016372

1/2" = 1'-0"

0 2 53

UBO NOTATION:

UBO REVIEW DRAWINGS

EQUIPMENT SCHEDULE

ITEM NO. DESCRIPTION OF EQUIPMENT APPROVED MANUFACTURER MODEL ITEM NO. REMARKS

101 1 SERVING COUNTER MILLWORK PROVIDER 101 REFER TO MANUFACTURER SHOP DRAWINGS

106 1 DESSERT COUNTER MILLWORK PROVIDER 106 REFER TO MANUFACTURER SHOP DRAWINGS

110 1 BACK SERVING COUNTER MILLWORK PROVIDER 110 REFER TO MANUFACTURER SHOP DRAWINGS 120 1 PRIMARY BOARDS COUNTER MILLWORK PROVIDER 120 REFER TO MANUFACTURER SHOP DRAWINGS

PROPRIETARY KITCHEN EQUIPMENT SCHEDULE

102c 1 MODULAR BEVERAGE CADDY KIT 3 MILLWORK PROVIDER 102c KIT INCLUDES (1) BACKPLATE, (4) LID HOLDERS, AND (1) STRAW HOLDER - (1) DRINK CARRIER TO BE PROVIDED PER RESTAURANT (NOT SHOWN ON DRAWINGS)

105 1 SERVING COUNTER FCC MODEL TBD 105 REFER TO MANUFACTURER SHOP DRAWINGS

105a 1 STAINLESS STEEL BIN HOLDER MILLWORK PROVIDER 105a 105d 1 PACKAGE BAG HOLDER MILLWORK PROVIDER 105d 111 1 STAINLESS STEEL UNDER COUNTER MOUNT HAND SINK VOLLRATH 10101-1 111 PROVIDED IN MILLWORK PACKAGE 120a 1 BUILT-IN BREAD RACK SLIDES MILLWORK PROVIDER 120a INCLUDE 2 BRACKETS PER SET - REFER TO MANUFACTURER SHOP DRAWINGS 563Da 1 DOUBLE TIER SANDWICH SLIDE STAND MILLWORK PROVIDER 563Da REFER TO MANUFACTURER SHOP DRAWINGS

KITCHEN EQUIPMENT SCHEDULE

(ITEMS TO BE REUSED/RELOCATED)

ITEM NO. DESCRIPTION OF EQUIPMENT APPROVED MANUFACTURER REMARKS

200SR 2 SLIM LINE TEA DISPENSER (SWEET) EQUIPMENT TO BE REUSED/RELOCATED 200SR

200UR 1 SLIM LINE TEA DISPENSER (UNSWEET) EQUIPMENT TO BE REUSED/RELOCATED 200UR

202R 1 SLIM JIM TRASH CAN EQUIPMENT TO BE REUSED/RELOCATED 202R

260R 1 60" BACKSHELF HOOD + 3" STANDOFF EQUIPMENT TO BE REUSED/RELOCATED 260R HOOD SHROUD BY VENT HOOD MANUFACTURER - REFER TO SHOP DRAWINGS 266R 1 118" BACKSHELF HOOD EQUIPMENT TO BE REUSED/RELOCATED 266R HOOD SHROUD BY VENT HOOD MANUFACTURER - REFER TO SHOP DRAWINGS 269R 1 FIRE SUPPRESSION SYSTEM EQUIPMENT TO BE REUSED/RELOCATED 269R REMOTE CABINET - REFER TO SHOP DRAWINGS 270R 1 FIRE SUPPRESSION SYSTEM EQUIPMENT TO BE REUSED/RELOCATED 270R LOCATED ABOVE HOOD BEHIND CLOSURE PANEL - REFER TO SHOP DRAWINGS

305R 1 TEA BREWER EQUIPMENT TO BE REUSED/RELOCATED 305R

310R 1 DOUBLE LEMONADE BUBBLER EQUIPMENT TO BE REUSED/RELOCATED 310R

420LR 1 SINGLE UNDERCOUNTER REFRIGERATOR (27") EQUIPMENT TO BE REUSED/RELOCATED 420LR HINGE LEFT 420R 1 SINGLE UNDERCOUNTER REFRIGERATOR (27") EQUIPMENT TO BE REUSED/RELOCATED 420R HINGE RIGHT

444DR 1 DOUBLE THAWING CABINET (52 1/8") EQUIPMENT TO BE REUSED/RELOCATED 444DR

444SLR 1 SINGLE THAWING CABINET (32") EQUIPMENT TO BE REUSED/RELOCATED 444SLR

500AR 1 VERTICAL CONTACT TOASTER EQUIPMENT TO BE REUSED/RELOCATED 500AR

522LR 2 SINGLE OPEN FRYER EQUIPMENT TO BE REUSED/RELOCATED 522LR

523R 4 PRESSURE FRYER EQUIPMENT TO BE REUSED/RELOCATED 523R

524R 1 DUAL SIDE CLAMSHELL GRILL EQUIPMENT TO BE REUSED/RELOCATED 524R

562AR 1 HIGH DENSITY HOT HOLDING TOWER EQUIPMENT TO BE REUSED/RELOCATED 562AR

562ATR 1 HIGH DENSITY HOT HOLDING TOWER EQUIPMENT TO BE REUSED/RELOCATED 562ATR

581R 1 CHICKEN TRANSFER STATION EQUIPMENT TO BE REUSED/RELOCATED 581R

631MR 1 FILET TABLE (30"x30") EQUIPMENT TO BE REUSED/RELOCATED 631MR 1324R 1 FLOOR SHELF UNIT (74" POST, 18"x48") EQUIPMENT TO BE REUSED/RELOCATED 1324R METROSEAL GRAY - 2 SHELVES ABOVE DUNNAGE SHELF & 1 SHELF BELOW DUNNAGE SHELF

EQUIPMENT SCHEDULE (FUTURE ITEMS)

F444S 1 FUTURE SINGLE THAWING CABINET (32") TRAULSEN RET132EWUT-FHS F444S HINGE RIGHT - ORDER WITH 6 1/4" CASTERS

F503T 1 FUTURE EGG STATION ANTUNES ES-600R 9300657 F503T

F523 1 FUTURE PRESSURE FRYER HENNY PENNY PFE-500 F523

GRUB HUB MASTER EQUIPMENT SCHEDULE

ITEM NO. Q

A N

DESCRIPTION OF EQUIPMENT REMARKS

187A 1 GRUB HUB BEVERAGE KDS MONITOR INCLUDES CHROMEBOX (#GRC-0000029), KEYBOARD (#GRC-0000070), AND BUMP BAR (#GRC-0000030C) 187a 6 GRUB HUB WALL MOUNT KDS ARM USED TO MOUNT ORDER MONITORS - ORDER MODEL #GH7000-1000 WITH WALL FLEXMOUNT AND KC3 BRACKET - NOT SHOWN ON DRAWINGS 187B 1 GRUB HUB DESSERT KDS MONITOR INCLUDES CHROMEBOX (#GRC-0000029), KEYBOARD (#GRC-0000070), AND BUMP BAR (#GRC-0000030C) 187C 1 GRUB HUB EXPO 1 KDS MONITOR INCLUDES CHROMEBOX (#GRC-0000029), KEYBOARD (#GRC-0000070), AND BUMP BAR (#GRC-0000030C) 187D 1 GRUB HUB EXPO 2 KDS MONITOR INCLUDES CHROMEBOX (#GRC-0000029), KEYBOARD (#GRC-0000070), AND BUMP BAR (#GRC-0000030C) 187E 1 GRUB HUB FRY KDS MONITOR INCLUDES CHROMEBOX (#GRC-0000029), KEYBOARD (#GRC-0000070), AND BUMP BAR (#GRC-0000030C) 187F 1 GRUB HUB PRIMARY BOARDS KDS MONITOR INCLUDES CHROMEBOX (#GRC-0000029), KEYBOARD (#GRC-0000070), AND BUMP BAR (#GRC-0000030C) 187G 1 GRUB HUB SECONDARY BOARDS KDS MONITOR INCLUDES CHROMEBOX (#GRC-0000029), KEYBOARD (#GRC-0000070), AND BUMP BAR (#GRC-0000030C)

188 1 GRUB HUB POS KIOSK REFER TO MANUFACTURER SHOP DRAWINGS

EQUIPMENT SCHEDULE

PREFERRED MANUFACTURER AND MODEL

181 1 CASH DRAWER APG 1816 (SERIES 4000) 181 PROVIDED BY CFA IT

182 1 RECEIPT PRINTER EPSON TM-T88IV 182 PROVIDED BY CFA IT

182L 5 LABEL PRINTER EPSON TM-L90 182L PROVIDED BY CFA IT

183c 1 COUNTER MOUNT POLE HONORBUILT 183c USED TO MOUNT ORDER MONITORS 200SR 2 SLIM LINE TEA DISPENSER (SWEET) EQUIPMENT TO BE REUSED/RELOCATED TCN040-SW 200SR 200UR 1 SLIM LINE TEA DISPENSER (UNSWEET) EQUIPMENT TO BE REUSED/RELOCATED TCN040-US 200UR

202 3 SLIM JIM TRASH CAN RUBBERMAID FG354060GRAY 202 PROVIDED BY CLARK

202A 2 SLIM JIM TRASH CAN RUBBERMAID 1971258 202A

202R 1 SLIM JIM TRASH CAN EQUIPMENT TO BE REUSED/RELOCATED FG354060GRAY 202R

206 4 SOAP DISPENSER ECOLAB 92211379 206 RE: ARCHITECTURAL SHEETS FOR DETAILS ON MOUNTING HEIGHTS AND LOCATIONS

210 1 INGREDIENT BIN RUBBERMAID 3602-88 210 PROVIDED BY CLARK

211B 2 FLY LIGHT PESTWEST 125-000502 (MANTIS QUALIS) 211B

225 1 FAT VAT PITCO FRIALATOR FAT VAT 225 PROVIDED BY CLARK

305R 1 TEA BREWER EQUIPMENT TO BE REUSED/RELOCATED TCTT-10000 305R

308e 1 SYRUP RACK MONIN P573 308e PROVIDED BY CLARK

310R 1 DOUBLE LEMONADE BUBBLER EQUIPMENT TO BE REUSED/RELOCATED CS-2D-16 310R

315W 1 10-HEAD BEVERAGE DISPENSER WITH ICE BIN LANCER 85-23710T-110-07-CFA 315W INCLUDES PORTION CONTROL VALVES

355F 1 FAUCET FOR DECK MOUNTED HAND SINK T&S B-0328-CR-VF05 355F

359 2 WALL MOUNTED SPLASH GUARD GC TO COORD. SPEC W/ FOOD SERVICE PROVIDER 359 RIGHT HAND MOUNT - 12 IN HIGH x 24 IN WIDE S/S WALL MOUNTED SIDE SPLASH WITH HEMMED EDGE 359L 3 WALL MOUNTED SPLASH GUARD GC TO COORD. SPEC W/ FOOD SERVICE PROVIDER 359L LEFT HAND MOUNT - 12 IN HIGH x 24 IN WIDE S/S WALL MOUNTED SIDE SPLASH WITH HEMMED EDGE

360A 1 HAND SINK EAGLE HSAN-10 360A WITH SIDE MOUNTING BRACKETS

360AF 1 FAUCET (WALL MOUNTED HAND SINK) T&S B-1146-CFA-VF05 360AF

360F 2 SENSOR FAUCET (WALL MOUNTED HAND SINK) TOTO TEL165-C20E#CP 360F

420LR 1 SINGLE UNDERCOUNTER REFRIGERATOR (27") EQUIPMENT TO BE REUSED/RELOCATED UHT27-ZCF 420LR HINGE LEFT 420R 1 SINGLE UNDERCOUNTER REFRIGERATOR (27") EQUIPMENT TO BE REUSED/RELOCATED UHT27-ZCF 420R HINGE RIGHT

500AR 1 VERTICAL CONTACT TOASTER EQUIPMENT TO BE REUSED/RELOCATED VCT-2 500AR

522LR 2 SINGLE OPEN FRYER EQUIPMENT TO BE REUSED/RELOCATED OFE-321.05 522LR

523R 4 PRESSURE FRYER EQUIPMENT TO BE REUSED/RELOCATED PFE-500 523R

524R 1 DUAL SIDE CLAMSHELL GRILL EQUIPMENT TO BE REUSED/RELOCATED CXPB12 524R

562AR 1 HIGH DENSITY HOT HOLDING TOWER EQUIPMENT TO BE REUSED/RELOCATED 562AR

562ATR 1 HIGH DENSITY HOT HOLDING TOWER EQUIPMENT TO BE REUSED/RELOCATED 18017713 562ATR

581R 1 CHICKEN TRANSFER STATION EQUIPMENT TO BE REUSED/RELOCATED 18008028 581R

631MR 1 FILET TABLE (30"x30") EQUIPMENT TO BE REUSED/RELOCATED 3ACF355 631MR

672 4 DIGITAL MENU BOARD (43") SAMSUNG QM43C 672 PROVIDED BY CINEPLEX

Q U

A N

Y Q

U A

N T

ITEM NO. DESCRIPTION OF EQUIPMENT APPROVED MANUFACTURER MODEL ITEM NO. REMARKSQ

A N

ITEM NO. DESCRIPTION OF EQUIPMENT MODEL ITEM NO. REMARKSQ

A N

ITEM NO. DESCRIPTION OF EQUIPMENT APPROVED MANUFACTURER MODEL ITEM NO. REMARKSQ

A N

Architects

Virginia

DATE:

PROJECT NO:

Inc.

The

CHECKED BY:

DRAWN BY:

96554

9/30/24

SLL

DAR / SLL

C H

−F

−A R

E N

O V

A T

S O

W E

N S

H A

L L

V irg in ia

T e ch

B la ck sb u rg

, V irg in ia

V A

N S

Lic. No. 016372

0' - 0"

9' - 6"

3"3"

(8) STYLES WITH (7) EQUAL PANELS

NOTE: ALL VERTICAL SEAMS IN FACE PANELS TO BE BEHIND VERTICAL STYLES

EXIST. CLG.

12'-0"

48"

T.O.SLAB

9'-1"

EQ EQ 31"

ELEVATION LEGEND

EQUIPMENT ITEM NUMBER

SERVING COUNTER/WALL SIDE ELEVATION

SCALE: 1/2"=1'-0"

B A1A4

SERVING COUNTER FRONT ELEVATION

SCALE: 1/2"=1'-0"

B A1A4

SCRIPT SIGN ELEVATION / SERVING COUNTER SECTION

SCALE: 1/2"=1'-0"

A A1A4

NEW CLG./

SOFFIT

0' - 0"

T.O.SLAB

'-6

'-4

'-6

6" 6" 1'-9" 2'-7" 1'-3" 6" 6"

'-0

10"

'-8

1'-0" 1'-0" 1'-6" 6" 11"

4" 4" 3'-11"

SERVING COUNTER REAR ELEVATION

SCALE: 1/2"=1'-0"

D A1A4

SERVING 103B5 BACK COUNTER ELEVATION

SCALE: 1/2"=1'-0"

E A1A4

5' - 11" CL OF

BLOCKING

4' - 0" TO CL OF

BLOCKING

6' - 0" CL OF

BLOCKING

3' - 8 3/4" TO CL OF

BLOCKING

4' - 5 1/4" TO CL OF

BLOCKING

5' - 1 3/4" TO CL OF

BLOCKING

5' - 10 1/4" TO CL OF

BLOCKING

7' - 0" PASS-THRU

BULKHEAD

CUT RAIL IN FIELD

TO FIT (TYP.)

CUT RAIL IN

FIELD TO FIT

MOUNT RAILS TO STUDS ON

EITHER SIDE OF PIN & SLEEVE

BOX - SEE DETAIL ON AX FOR

MORE INFO (TYP.)

T.O. ACCESSIBLE COUNTER

2'-10"

2'-6" 2'-1" 2'-0" 11'-9"

9'-1"

EXIST. CEILING

NEW CLG./ SOFFIT

9'-11"

#980 METAL

HALF WALL

OPEN TO

BEYOND

EXISTING

COLUMN

BEYOND

OPEN TO

BEYOND

OPEN TO

BEYOND

EXISTING FINISHES AT

PILASTERS TO REMAIN

PAINT TO MATCH

EXISTING

OPEN TO

BEYOND #980 METAL HALF WALL

OPEN TO

BEYOND

EXISTING

COLUMN

REMAIN

OPEN TO

BEYOND

#980 METAL

HALF WALL

EXISTING FINISHES

TO REMAIN

'-0

REUSED EQUIPMENT

ITEM NUMBER

ELECTRICAL DEVICE -

SEE ELECT.

4'-11" 5'-5" 2'-10"

1/2" = 1'-0"

0 2 53

UBO NOTATION:

UBO REVIEW DRAWINGS

'-0

8" 1'-0"

'-0

0' - 0" 2'-0"4'-0"

'-0

1'-2"

'-2

6" 1'-10" 1'-0" 1'-0" 1'-0" 1'-0" 1'-0"

'-0

1'-4" 4" 4"

11" 1'-6"

'-8

4" 4" 4"4" 4"

'-0

'-8

'-3

'-4

3'-0" 3'-6" 3'-0" 4'-0"

'-4

'-0

4'-0"2'-2"1'-9"1'-9"1'-4"1'-3"1'-8"1'-8"1'-8"1'-8"1'-4"1'-6"3'-6"

'-4

'-0

KITCHEN 115 ELEVATION

SCALE: 1/2"=1'-0"

L A1A4

KITCHEN 115B ELEVATION

SCALE: 1/2"=1'-0"

G A1A4

KITCHEN 115 ELEVATION

SCALE: 1/2"=1'-0"

H A1A4

KITCHEN 115B ELEVATION - BOARDS COUNTER

SCALE: 1/2"=1'-0"

F A1A4

KITCHEN 115 ELEVATION

SCALE: 1/2"=1'-0"

X A1A4

KITCHEN 115 ELEVATION

SCALE: 1/2"=1'-0"

J A1A4

KITCHEN 115 ELEVATION

SCALE: 1/2"=1'-0"

K A1A4

KITCHEN 115 DOOR ELEVATION

SCALE: 1/2"=1'-0"

N A1A4

Blacksburg, Alliance Architects

Virginia

DATE:

PROJECT NO:

Inc.

The

CHECKED BY:

DRAWN BY:

96554

9/30/24

SLL

DAR / SLL

C H

−F

−A R

E N

O V

A T

S O

W E

N S

H A

L L

V irg in ia

T e ch

B la ck sb u rg

, V irg in ia

V A

N S

Lic. No. 016372

GEN

FOR TASK LIGHT

PROVIDE

WP COVER

6' - 9" TO TOP

OF SHELF

8' - 0" CL OF

BLOCKING

5' - 7" TO TOP

OF SHELF

6' - 9" TO TOP

OF SHELF

8' - 0" CL OF

BLOCKING

GEN

6' - 11" TO TOP

OF SHELF

8' - 2" CL OF

BLOCKING

5' - 11" CL OF

BLOCKING

444SLR

8' - 2" CL OF

BLOCKING

6' - 11" TO TOP

OF SHELF

5' - 7" TO TOP

OF SHELF

442WC

8' - 0" CL OF

BLOCKING

5' - 7" TO TOP

OF SHELF

6' - 9" TO TOP

OF SHELF

FIRE

SUPPRESSION

CABINET

FIRE

SUPPRESSION

CABINET

562ATR

HOOD - SEE MECH.

DROP-CORD

RECEPTACLE

(FIVE TOTAL

REQUIRED)

0' - 0"

KITCHEN CLG.

9'-6"

T.O.SLAB

0' - 0"

KITCHEN CLG.

9'-6"

T.O.SLAB

0' - 0"

KITCHEN CLG.

9'-6"

T.O.SLAB

ELEVATION LEGEND

EQUIPMENT ITEM NUMBER

REUSED EQUIPMENT

ITEM NUMBER

ELECTRICAL DEVICE -

SEE ELECT.

'-1

HOOD - SEE MECH.

3" STAINLESS STEEL LEG

WITH ADJUSTABLE FOOT

(TYP. FOR 4)

DROP-CORD

RECEPTACLE

(SEVEN TOTAL

REQUIRED)

'-0

1/2" = 1'-0"

0 2 53

" 6

3/4" 3 /4

C U

T O

U T

2'-10"

'-3

2'-7 1/4"

MAIN CABINET

2 3/4" 2'-1 1/2" 4"

C U

T O

U T

" 6

2'-7 1/4"

MAIN CABINET

2'-10"

2 3/4" 2'-1 1/2" 4"

3/4"

4" 2'-1 3/8"

TILE BASE

3/4" MARINE GRADE

PLYWD. - COVER W/ WHITE

CABINET LINER (TYP.)

3/4" MARINE GRADE PLYWD.

DOOR W/ CONCEALED

HINGES - COVER W/ (PL-40)

ON SERVICE SIDE & WHITE

CABINET LINER AT

INTERIOR

2'-4"

ADJUSTABLE SHELF - 3/4" MARINE

GRADE PLYWD. - COVER W/ WHITE

CABINET LINER (TYP.)

INTEGRAL BACKSPLASH

WALL FINISH TO EXTEND

BEHIND CASEWORK TO

WD. CURB

'-0

2'-6"

FROM FACE OF FINISH

SOLID SURFACE

COUNTERTOP W/ INTEGRAL

TURNDOWNS OVER 3/4"

PLYWD. SUBSTRATE

ELECT

CHASE

BEVERAGE

CHASE

2'-7 1/4"

MAIN CABINET

3/4" X 3/4" ALUMINUM

ANGLE AT FACE

ADJUSTABLE SHELF - 3/4"

MARINE GRADE PLYWD. -

COVER W/ WHITE CABINET

LINER (TYP.)

TILE BASE

2'-10"

2 3/4" 2'-1 1/2" 4"

3/4"

1 1/4"

SOLID SURFACE COUNTERTOP W/ INTEGRAL

TURNDOWNS OVER 3/4" PLYWD. SUBSTRATE

TILE BASE

1/4" BOTTOM STILE -

FACE APPLIED

3/4" PLYWD. FACE

PANEL - ATTACH TO

MAIN CABINET AT BACK.

LINE OF 1/4" VERTICAL

STILE BEYOND - FACE

APPLIED

1/4" TOP STILE -

FACE APPLIED

'-3

" 2X6 PRESSURE TREATED

CURBS - SEE DIMENSIONAL

PLAN FOR LAYOUT

TILE BASE

1'-10"

'-1

3/4" MARINE GRADE

PLYWD. BRACE W/

(PL-3) ON ALL EXPOSED

SURFACES

TILE FINISH

2" X 2" ALUMINUM ANGLE VERT. & HORIZ. -

ATTACHE TO SIDE BRACKET W/ (4) SELF

TAPPING SCREWS - ATTACHE TO WALL W/

(4) 9-15 X 1 1/2" BUILDEX TRUGRIP

FASTENERS

'-0

2'-6"

FROM FACE OF FINISH

SOLID SURFACE COUNTERTOP W/

INTEGRAL TURNDOWNS OVER 3/4"

PLYWD. SUBSTRATE

" 3'-0"

TILE BASE

"PROVIDE FINISHED UNDERSIDE

2'-7" 1"

1/8"

5 1/4"

2 1/4"

EQ.

CONT. L2x2x1/4 SUPPORT

2'-4 5/8"

CABINET DEPTH8 5/8"

2'-1 3/8"

29 7/8" @ SIM. FRONT COUNTER

ADJUSTABLE SHELF - 3/4"

MARINE GRADE PLYWD. -

COVER W/ WHITE CABINET

LINER (TYP.)

TILE BASE

3/4" MARINE GRADE PLYWD. -

COVER W/ WHITE CABINET

LINER (TYP.)

SOLID SURFACE

COUNTERTOP W/ INTEGRAL

TURNDOWNS OVER 3/4"

PLYWD. SUBSTRATE

'-0

A T

. F R

O N

T C

O U

N T

E R

ELECT

CHASE

BEVERAGE

CHASE

3/4" MARINE GRADE

PLYWD. - COVER W/ WHITE

CABINET LINER (TYP.)

(PL-40 ) AT ALL EXTERIOR

FACES OF CASEWORK VISIBLE

TO SERVICE AREA

ALUMINUM PULL HANDLE

3/4" MARINE GRADE PLYWD.

DOOR W/ CONCEALED HINGES -

COVER W/ (PL-40) ON SERVICE

SIDE & WHITE CABINET LINER

AT INTERIOR

TILE FINISH

C U

T O

U T

2'-10"

'-3

2 3/4" 2'-1 1/2" 4"

C U

T O

U T

2 1/2"

3/4" X 3/4" ALUMINUM

ANGLE AT FACE

ADJUSTABLE SHELF;

3/4" MARINE GRADE

PLYWD. COVERED w/

WHITE CABINET LINER

(TYP.).

TILE BASE

2'-10"

2'-1 1/2" 4"

3/4"

SOLID SURFACE COUNTERTOP W/

INTEGRAL TURNDOWNS OVER 3/4"

PLYWD. SUBSTRATE

2X6 PRESSURE TREATED

CURBS - SEE DIMENSIONAL

PLAN FOR LAYOUT

2 1/2"

'-1

4 5/8"

ELECTRICAL OUTLET

(TURNED HORIZONTAL) -

SEE ELECT. - RECESS INTO

CASEWORK & PROVIDE

FLEXIBLE MC CONDUIT FOR

WIRING - SEE ELEVATIONS

HEIGHTS AND LOCATIONS

2" HOLE W/ STAINLESS

STEEL GROMMET

ELECTRICAL CHASE

BEVERAGE CHASE

ADJUSTABLE SHELF - 3/4"

MARINE GRADE PLYWD. -

COVER W/ WHITE

CABINET LINER (TYP.)

3/4" X 3/4" ALUMINUM

ANGLE AT FACE.

TILE BASE2X6 PRESSURE TREATED

CURBS - SEE DIMENSIONAL

PLAN FOR LAYOUT

1/4" BOTTOM STILE -

FACE APPLIED.

LINE OF 1/4" VERT.

STILE BEYOND - FACE

APPLIED.

3/4" PLYWD. FACE

PANEL - ATTACH TO

MAIN CABINET AT BACK.

1/4" BOTTOM STILE -

FACE APPLIED.

TILE BASE

SOLID SURFACE COUNTERTOP

W/ INTEGRAL TURNDOWNS OVER

3/4" PLYWD. SUBSTRATE

ELECTRICAL CHASE

BEVERAGE CHASE

2X6 PRESSURE TREATED

CURBS - SEE DIMENSIONAL

PLAN FOR LAYOUT

3/4" MARINE GRADE

PLYWD. - COVER

W/ WHITE CABINET

LINER (TYP.).

3/4" MARINE GRADE

PLYWD. - COVER

W/ WHITE CABINET

LINER (TYP.)

1/4" BOTTOM STILE -

FACE APPLIED.

LINE OF 1/4" VERT.

STILE BEYOND - FACE

APPLIED.

3/4" PLYWD. FACE

PANEL - ATTACH TO

MAIN CABINET AT BACK.

1/4" BOTTOM STILE -

FACE APPLIED.

TILE BASE

SOLID SURFACE

COUNTERTOP W/

INTEGRAL TURNDOWNS

OVER 3/4" PLYWD.

SUBSTRATE

2X6 PRESSURE TREATED

CURBS - SEE DIMENSIONAL

PLAN FOR LAYOUT

3/4" MARINE GRADE

PLYWD. - COVER W/

WHITE CABINET

LINER (TYP.).

3/4" MARINE GRADE

PLYWD. - COVER W/

WHITE CABINET

LINER (TYP.).

3/4" 3 /4

980 980

'-1

4 5/8"

(2) 1/8" DIAMETER PILOT

HOLES (TYPICAL) W/ #8-18

STAINLESS SCREWS, ONE

AT EACH END

2 1/4" X 5 1/4" X 28"

ALUMINUM ANGLE

COUNTER TOP: (2) LAYERS OF

1/2" MARINE GRADE PLYWD.

WRAPPED IN FULLY ADHERED

14 GA. STAINLESS STEEL

FRP WALL FINISH

3" DIA. STAINLESS STEEL LEG

w/ ADJUSTABLE FOOT

Blacksburg, Alliance Architects

Virginia

DATE:

PROJECT NO:

Inc.

The

CHECKED BY:

DRAWN BY:

96554

11/20/24

SLL

DAR / SLL

C H

−F

−A R

E N

O V

A T

S O

W E

N S

H A

L L

V irg in ia

T e ch

B la ck sb u rg

, V irg in ia

S E

C T

S A

N D

D E

T A

Lic. No. 016372

1 1/2" = 1'-0"

SECTION: CASH DRAWER

SCALE: 1-1/2"=1'-0"

A1A6

SECTION: COUNTER SECTION CUP DISPENSER

SCALE: 1-1/2"=1'-0"

A1A6

SECTION: COUNTER SECTION CUP DISPENSER w/980

SCALE: 1-1/2"=1'-0"

A1A6

SECTION: FRONT COUNTER OPEN SHELF w/980

SCALE: 1-1/2"=1'-0"

A1A6

SECTION: FRONT COUNTER OPEN SHELF

SCALE: 1-1/2"=1'-0"

A1A6

SECTION: STANDARD REAR COUNTER

SCALE: 1-1/2"=1'-0"

A1A6

SECTION: REAR COUNTER OPEN SHELF

SCALE: 1-1/2"=1'-0"

A1A6

SECTION: WALL MOUNTED SUPPORT

SCALE: 1-1/2"=1'-0"

A1A6

SECTION: BREAD RACK w/LEG SUPPORTS

SCALE: 1-1/2"=1'-0"

A1A6

(CG-3B) AT TILE

SCALE: 1-1/2"=1'-0"

A1A6

(CG-3B) AT FRP

SCALE: 1-1/2"=1'-0"

A1A6

(CG-3A) CORNER GUARD

SCALE: 1-1/2"=1'-0"

A1A6

STAINLESS STEEL END CAP (CG-3B) -

COORD. W/ WIDTH OF WALL &

FINISHES FOR TIGHT FIT

FIRE RETARDANT TREATED 2X

BLOCKING

FRP PANELS - SEE FINISH

SCHEDULE

SHEATHING - SEE WALL

TYPE DETAILS

CERAMIC WALL TILE - SEE FINISH

SCHEDULE

METAL STUDS

STAINLESS STEEL END CAP (CG-3B)

COORDINATE W/ WIDTH OF WALL

AND FINISHES FOR TIGHT FIT

FIRE RETARDANT TREATED 2X

BLOCKING

FRP PANELS - SEE FINISH

SCHEDULE

SHEATHING - SEE WALL

TYPE DETAILS

METAL STUDS

FRP PANELS - SEE

FINISH SCHEDULE

STAINLESS STEEL

CORNER GUARD (CG-3A)

METAL STUDS

SHEATHING - SEE

WALL TYPE DETAILS

FRP PANELS - SEE

FINISH SCHEDULE

PROVIDE CUT-OUTS FOR

BEVERAGE LINES AND

ELECTRICAL CONDUIT

ELECTRICAL OUTLET

(TURNED HORIZONTAL) -

SEE ELECT. - RECESS INTO

CASEWORK & PROVIDE

FLEXIBLE MC CONDUIT FOR

WIRING - SEE ELEVATIONS

HEIGHTS AND LOCATIONS

PROVIDE CUT-OUTS FOR

BEVERAGE LINES AND

ELECTRICAL CONDUIT

2X6 PRESSURE TREATED

CURBS - SEE DIMENSIONAL

PLAN FOR LAYOUT

2X6 PRESSURE TREATED

CURBS - SEE DIMENSIONAL

PLAN FOR LAYOUT

TILE BASE

H E

T S

E E

V A

S E

E E

A T

Pick Up

V A

S 6"

SCRIPT SIGN 171

SCALE: 3/4"=1'-0"

A1A7

ARTWORK 957

SCALE: 3/4"=1'-0"

A1A7

2'-1" 2'-1"

'-1

'-5

F I

C O

N A

N D

C K

5/8" CDX-FRT PLYWD.

BEHIND SHEATHING

1'-1" 1'-1"

'-5

E N

T E

R L

O F

C K

'-5

F B

L O

C K

'-3

F A

R T

W O

R K

10" 10"

'-8

F A

R T

W O

R K

'-9

F B

L O

C K

ITEM 956

SCALE: 1/2"=1'-0"

A1A7

ICON 950 - 36"X36"

SCALE: 1/2"=1'-0"

A1A7

ITEM 952

SCALE: 1/2"=1'-0"

A1A7

NOTE:

PROVIDE TRACK (SIZED TO MATCH STUDS) AT CONNECTIONS TO

KICKERS & CROSS BRACING AS NEEDED (TYP.)

3 5/8" METAL STUDS @

16" O.C

UNISTRUT - SUSPEND FROM

THREADED ROD @ 48" O.C. EA.

DIRECTION

HORIZONTAL

BRACING

3 5/8" MTL. STUD

BRACES SISTERED TO

ADJ. STUDS

5/8" DRYWALL - PAINT

DIGITAL MENU BOARD

WALL TILE

9'-1" AFF

SOFFIT HEIGHT

5/8" DRYWALL OVER MTL.

STUD - PAINT

1/2" ALL THREAD

SUSPENSION ROD

6" WIDE MIN. METAL TRACK @

ROD LOCATIONS

METAL STUD CEILING JOIST

UNISTRUT - RUN PARALLEL TO

SOFFIT WALLS

SOFFIT AT SERVICE

SCALE: 3/4"=1'-0"

A2A7

3 5/8" MTL. STUD FURRING @ 16" O.C. &

PERPENDICULAR TO FRAMING ABOVE

SHEATHING - SEE WALL TYPE DETAILS

FIELD TILE

METAL STUDS

FRP PANELS - SEE FINISH SCHEDULE

BULLNOSED TILE: AT FACE; ALIGN

W/ FACE OF TILE; CUT AS

NECESSARY FOR RUNNING PATTERN

FRT 2 X BLOCKING

EDGE PROTECTOR

TRIM (TR-1)

SEALANT

FLOOR FINISH - SEE FINISH SCHEDULE

Blacksburg, Alliance Architects

Virginia

DATE:

PROJECT NO:

Inc.

The

CHECKED BY:

DRAWN BY:

96554

11/20/24

SLL

DAR / SLL

C H

−F

−A R

E N

O V

A T

S O

W E

N S

H A

L L

V irg in ia

T e ch

B la ck sb u rg

, V irg in ia

D E

T A

Lic. No. 016372 6"0

3" = 1'-0"

TILE AT END WALL

SCALE: 3"=1'-0"

A1A7

BASE TILE AT FRP

SCALE: 3"=1'-0"

A1A7

BASE TILE AT TILE

SCALE: 3"=1'-0"

A1A7

BULLNOSED TILE AT CORNER

SCALE: 3"=1'-0"

A1A7

FIELD TILE: IN RUNNING BOND PATTERN -

CUT AS NECESSARY TO MAINTAIN

RUNNING BOND PATTERN

FRP - EXTEND 1" MIN. BEHIND BASE

BASE TILE W/ COVE BASE &

BULLNOSED TOP

WATERPROOF MEMBRANE

FIELD TILE - START TILE INSTALLATION AT

TOP OF BASE TILE - FULL TILE AT FIRST

ROW

BASE TILE W/ COVE BASE & BULLNOSED

TOP - CUT BULLNOSE WHERE ADJACENT TO

TILE ABOVE

FIELD TILE IN RUNNING BOND PATTERN -

CUT AS NECESSARY TO MAINTAIN

RUNNING BOND PATTERN

METAL STUDS

BULLNOSED TILE AT CORNER - ALIGN W/

FACE OF TILE AT FACE OF ADJACENT WALL -

CUT AS NECESSARY FOR RUNNING BOND

PATTERN

FIELD TILE IN RUNNING BOND PATTERN -

CUT AS NECESSARY TO MAINTAIN

RUNNING BOND PATTERN

SHEATHING - SEE WALL TYPE DETAILS

UBO NOTATION:

UBO REVIEW DRAWINGS

FLOOR FINISH - SEE FINISH SCHEDULE

WATERPROOF MEMBRANE

ICE CREAM MACHINE

4-PIECE CHUTE KIT

FRY WARMER

NOTE: UNIT BREATHS AIR

FROM BOTTOM THROUGH

CUT-OUT IN COUNTERTOP

FRY CARTON

DISPENSER RACK

FRY CARTON

DISPENSER BASE PLATE

TOWER

PANS (x4)

BIN HOLDERBIN

RAIL

BIN

WALL BRACKET

WALL SHELF

LIP OF WALL SHELF

GOES INSIDE WALL

BRACKET

WALL

MOUNT TO WALL USING

THE INCLUDED HARDWARE

WALL

RADIAL ARM

CANTILEVER ARM

TASK LIGHT

NOTE: TASK LIGHT BRACKET TO BE

INSTALLED BEFORE THE SHELF

SHELF

TASK LIGHT BRACKET

'-1

A F

12" MIN.

1'-6"

SPLASH GUARD

HAND SINK FAUCET

HAND SOAP DISPENSER

PAPER TOWEL DISPENSER

'-8

A F

SEE ELEVATIONS

CL OF TRACK

SEE ELEVATIONS

TOP OF SHELF

SEE ELEVATIONS

TOP OF SHELF

STEP 2: HANG UPRIGHTS

FROM TRACK 45" UPRIGHTS REQUIRED

FOR TWO TIERED SHELVING

24" DEEP WIRE SHELF (TYP.)

14" OR 18" DEEP SOLID OR

WIRE SHELF (TYP.)

STEP 3: ATTACH SHELF

BRACKETS TO UPRIGHTS

STEP 4: ATTACH ALL

SHELVES AND GRIDS

STEP 1: INSTALL TRACK

STEP 5: SECURE

UPRIGHTS TO WALL

4-TIER 5-TIER

74" POSTS

WIRE SHELF

DUNNAGE SHELVES

WIRE SHELF

86" POSTS

ADJ.FEET

.F .F

SHELF HEIGHTS

TOP (74")

54"

32"

SHELF HEIGHTS

TOP (86")

66"

46"

26"

WIRE SHELF

TUBE-STYLE

DUNNAGE SHELVES

FREEZER W/ TUBULAR-STEEL

86" OR 74" POSTS

FOOT PLATE

SHELF HEIGHTS

TOP (86")

66"

46"

26"

" M

A .F

WIRE SHELF

CROSS BAR &

BRACE KIT

ARM

86" UPRIGHT

LEG

SHELF MOUNT HOOK

& LOCKING WEDGE

LEG HOOK

76" UPRIGHT

4-TIER5-TIER

SHELF HEIGHTS

82"

64"

46"

28"

SHELF HEIGHTS

70"

50"

30"

WIRE SHELF

CROSS BAR & BRACE KIT

ARM

86" UPRIGHT, TYP.

DIVIDER

LEG

SHELF MOUNT HOOK

& LOCKING WEDGE

WIRE SHELF TYP.

(SOLID LOWER TIER

USED OVER ICE

BATH BREADING)

SHELF HEIGHTS

78"

64"

Blacksburg, Alliance Architects

Virginia

DATE:

PROJECT NO:

Inc.

The

CHECKED BY:

DRAWN BY:

96554

11/20/24

SLL

DAR / SLL

C H

−F

−A R

E N

O V

A T

S O

W E

N S

H A

L L

V irg in ia

T e ch

B la ck sb u rg

, V irg in ia

E Q

M E

N T

D E

T A

Lic. No. 016372

ICE CREAM MACHINE & ACCESSORIES

NOT TO SCALE

A3A8

FRY PACKAGING & FRY DUMP

NOT TO SCALE

A3A8

HIGH DENSITY HOT HOLD TOWER

NOT TO SCALE

A3A8

BIN HOLDER W/ BINS

NOT TO SCALE

A3A8

RAIL & BINS

NOT TO SCALE

A3A8

MILKSHAKE BASE DISPENSER & SHELF

NOT TO SCALE

A3A8

KPS ARM

NOT TO SCALE

A3A8

HAND SINK & ACCESSORIES

NOT TO SCALE

A3A8

SHELVING INSTALL DETAIL: WALL MTD.

NOT TO SCALE

A3A8

SHELVING DETAIL: FLOOR SHELVES

NOT TO SCALE

A3A8

CANTILEVER - DRY STORAGE

NOT TO SCALE

A3A8

CANTILEVER SHELVING - OVERHEAD

NOT TO SCALE

A3A8

TASK LIGHT

NOT TO SCALE

A3A8

TYP. HAND SINK DIMENSIONS

NOT TO SCALE

A3A8

NOTES:

1. HOT AIR PASSES FROM BASE OF

MACHINE TO INSERT PAN, HEATING

THE UNDERSIDE OF THE

PERFORATED PAN

2. MACHINE & PAN HOOK TOGETHER

TO FORM ONE UNIT

3. CUT-OUTS REQUIRED FOR INSERT

PAN AND BOTTOM BREATHING

AREA OF PACKAGE CHUTE

NOTES:

1. MARK AND DRILL (2) 5/32" DIA. (3.8mm)

HOLES TO FASTEN UNIT TO

COUNTERTOP

2. SEAL TRIM RING TO COUNTERTOP W/

CLEAR NSF APPROVED SILICONE

SEALENT (PROVIDED)

3. INSTALL (2) 5mm SCREWS (PROVIDED)

TO SECURE UNIT TO COUNTERTOP

COOKIE HOLDER

(MOUNTED TO FRONT

OF SIDE SADDLE)

MIXERS (MOUNTED

TO FRONT OF ICE

CREAM MACHINE)

ADDITIONAL DOME LID

HOLDER (HOOKS ONTO

BACK OF BUILT-IN DOME

LID HOLDER)

TOPPING DISPENSER/HOLDER

SIDE SADDLE (MOUNTED TO

SIDE OF ICE CREAM MACHINE)

NOTE: RIGHT HAND VERSION

SHOWN -LEFT HAND VERSION

AVAILABLE

PERFORATED REMOVABLE

HOLDING PAN

MOUNT TO WALL USING GC

PROVIDED (2) 3/8"x3-1/2"

SDS. MIN. 2-1/2" EMBED TO

BLOCKING/FRAMING

GUIDE FOR

DRIP TRAY

MILKSHAKE BASE

DISPENSER

NOTES:

1. BIN SIZES & QUANTITIES WILL VARY

- SEE K-SHEETS FOR SPECIFICS &

ADJUST BIN ARRANGEMENT IF

NEEDED TO AVOID CONFLICTS

2. WHEN NO BLOCKING IS PRESENT

DUE TO PIN & SLEEVE BOXES,

RAILS MUST BE MOUNTED TO

STUDS - ENSURE THAT MOUNTING

HARDWARE DOES NOT PENETRATE

BACK OF PIN & SLEEVE

PAPER TOWEL

DISPENSER

SOAP

DISPENSER

SPLASH-MOUNTED

FAUCET

WALL MOUNTED

SPLASHGUARD

EYE WASH STATION

HAND SINK

TRASH CAN

ALIGN FEET W/

LARGE HOLE THEN

SLIDE BACK TO

LOCK IN PLACE

1/2" = 1'-0"

0 2 53

UBO NOTATION:

UBO REVIEW DRAWINGS

AHA-READY

CAMERA MOUNT

AHA-READY

PAN MOUNT

DRILL (2) 5/32" HOLES IN TRIM RING &

USE INCLUDED 5MM SCREWS TO

SEAL TRIM RING TO COUNTERTOP

SECURE UNIT TO COUNTERTOP W/

CONT. BEAD OF NSF APPROVED

SILICONE SEALANT

LIP OF BIN GOES

O/ TOP RAIL

MOUNT TO WALL USING

2 1/2" #14 FASTENER -

MIN. 1" EMBED TO

BLOCKING / FRAMING

WALL

CUT RAILS IN

FIELD AS NEEDED

NOTE: NOT APPLICABLE TO ACCESSIBLE

HAND SINK INSTALLATIONS

Architects

Virginia

DATE:

PROJECT NO:

Inc.

The

CHECKED BY:

DRAWN BY:

R E

A T

96554

11/20/24

SLL

DAR / SLL

C H

−F

−A R

E N

O V

A T

S O

W E

N S

H A

L L

V irg in ia

T e ch

B la ck sb u rg

, V irg in ia

O U

N E

S P

E C

A T

Lic. No. 016372

1/2" = 1'-0"

0 2 53

UBO NOTATION:

UBO REVIEW DRAWINGS

GENERAL NOTES:

SECTION 01000 - GENERAL REQUIREMENTS (CONTINUED)

16. THE CONTRACTOR SHALL HAVE A COMPETENT FOREMAN OR SUPERINTENDENT ON THE

JOB SITE AT ALL TIMES WHEN WORK (BY THE CONTRACTOR OR ANY SUBCONTRACTOR) IS

UNDERWAY. THE SUPERINTENDENT SHALL BE A FULL-TIME EMPLOYEE OF THE

CONTRACTOR. THE SUPERINTENDENT SHALL BE APPROVED IN ADVANCE BY THE OWNER'S

REPRESENTATIVE, BASED ON QUALIFICATIONS SUBMITTED IN WRITING TO THE OWNER. THE

CONTRACTOR SHALL NOTIFY THE OWNER, IN WRITING, OF ANY PROPOSED CHANGES IN THE

SUPERINTENDENT, INCLUDING THE REASONS FOR MAKING SUCH CHANGES.

17. PROVIDE PROTECTIONS FOR ALL FIRE ALARM COMPONENTS IN THE AREA SURROUNDING

THE WORK, ADEQUATE TO PREVENT FALSE ALARMS. REMOVE TEMPORARY PROTECTIONS

FOR SMOKE AND HEAT DETECTORS WHEN NO WORK IS UNDERWAY & AT THE END OF EACH

WORKDAY. THE CONTRACTOR SHALL BE RESPONSIBLE FOR ALL COSTS RELATED TO

ALARMS CAUSED BY WORK OPERATIONS.

18. THE CONTRACTOR SHALL COORDINATE ALL WORK OPERATIONS WITH ANY

CONTRACTORS PERFORMING WORK IN THE BUILDING UNDER SEPARATE CONTRACTS,

CONCURRENT WITH THIS PROJECT.

19. THE CONTRACTOR SHALL USE EXTREME CAUTION TO PREVENT DAMAGE TO EXIST. LAWN

AREAS & LANDSCAPING. ALL RUTTED, COMPACTED, OR OTHERWISE DAMAGED LAWN AREAS

SHALL BE RESTORED TO ORIGINAL CONDITIONS WITH TOPSOIL & SOD OVERLAY, INCLUDING 1

INCH MINIMUM THICKNESS OF TOPSOIL & PLASTIC NETTING. SEEDING SHALL NOT BE

ACCEPTABLE FOR LAWN REPAIRS.

SECTION 01330 - SUBMITTALS

1. WITHIN 15 CALENDAR DAYS OF RECEIPT OF NOTICE TO PROCEED, SUBMIT TO THE A/E &

THE OWNER'S REPRESENTATIVE, DETAILED PRODUCT SUBMITTALS, WARRANTIES, COLOR

SAMPLES, AND SHOP DRAWINGS FOR ALL COMPONENTS & PRODUCTS PROPOSED TO BE

INCLUDED IN THE WORK. SUBMITTALS SHALL BE CAREFULLY CHECKED BY THE GENERAL

CONTRACTOR, PRIOR TO SUBMITTAL TO THE A/E. UNLESS OTHERWISE SPECIFIED BY THE

A/E, PROVIDE AN ELECTRONIC SUBMITTAL OF ALL PERTINENT INFORMATION IN PDF FORMAT,

TRANSMITTED VIA DIRECT EMAIL FROM THE CONTRACTOR TO THE OWNER & A/E. OWNER &

A/E SHALL NOT BE REQD. TO ACCESS A WEBSITE TO OBTAIN PROJECT INFORMATION.

SUBMITTALS SHALL BE PROVIDED FOR ALL PRODUCTS & MATERIALS TO BE INCLUDED IN THE

WORK, WHETHER OR NOT SPECIFIC SUBMITTAL ITEMS ARE LISTED BELOW. FOR ALL EMAIL

SUBMITTALS, THE SUBJECT LINE SHALL FOLLOW A CONSISTENT FORMAT TO BE SPECIFIED

BY THE A/E.

2. SUBMITTALS OF ALL FINISH SAMPLES, COLOR CHARTS AND OTHER MATERIAL SAMPLES

SHALL BE DELIVERED TO THE OWNER'S REPRESENTATIVE IN DUPLICATE. ALL SAMPLES

SHALL BE NEATLY LABELED WITH THE PROJECT NAME AND THE LOCATION WHERE THE

PROPOSED MATERIAL IS TO BE INSTALLED. FOR ALL MATERIAL SELECTIONS, PHYSICAL

SAMPLES MAY BE REQUESTED BY THE OWNER'S REPRESENTATIVE TO VERIFY PRELIMINARY

COLOR AND TEXTURE SELECTIONS MADE FROM PRINTED COLOR AND TEXTURE CHARTS.

3. ALL SUBMITTALS SHALL BE IDENTIFIED BY A COVER SHEET, INCLUDING THE PROJECT

INFORMATION, CONTRACTOR INFORMATION, DATE OF SUBMITTAL, AND A SEQUENTIAL

SUBMITTAL NUMBER IDENTIFYING THE ORDER OF DELIVERY OF THE SUBMITTAL.

RESUBMITTALS SHALL BE IDENTIFIED BY THE SAME SEQUENTIAL NUMBER WITH A LETTER OR

NUMERIC SUFFIX. COVER SHEETS SHALL INCLUDE THE CONTRACTOR'S SIGNED

CERTIFICATION SPECIFIED IN THE GENERAL CONDITIONS (SECTION 24), STATING THAT ALL

WORK INCLUDED IN THE SUBMITTAL INFORMATION HAS BEEN CHECKED BY THE

CONTRACTOR, AND THAT THE INFORMATION MEETS ALL REQUIREMENTS OF THE CONTRACT

DOCUMENTS. ALL SUBSTITUTIONS, DIMENSIONAL VARIATIONS, AND OTHER DEVIATIONS

FROM THE CONTRACT DOCUMENTS SHALL BE CLEARLY MARKED AS SUCH.

4. NO COMPONENTS SHALL BE ORDERED PRIOR TO RECEIPT OF THE A/E & OWNER'S

APPROVALS OF THE SUBMITTAL INFORMATION. WHEN SCHEDULING THE PROJECT PRIOR TO

BIDDING, INCLUDE 14 CALENDAR DAYS FOR THE A/E & OWNER'S REVIEW AND 14 CALENDAR

DAYS FOR POSSIBLE RE-REVIEW OF…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Feb 10, 2025.