VA NOCO BASIS OF DESIGN CUT SHEETS 020522.pdf

Cheyenne VA Medical Center CBOC Loveland, CO

PRODUCT CUT SHEETS

2/5/2022 Cheyenne VA Medical Center

• Product Specification sheets per IDIQ MTR Codes ‐ pg 3‐252

• Product Specification sheets for Open Market Items ‐ pg 253‐261

• MTR Code General Requirements – pg 262‐270

Table of Contents

Cheyenne VA Medical Center CBOC

MTR CODE: CC2

Item: Conf Room chair

Qty: 74

Basis of Design:

• Brand Name or Equal: National Jiminy Chair Folding Nesting chair N52GUAC

• Upholstered seat & back, with arms, on casters

• Arms fold with chair.

• 23.5”w x 22”d, 17.75” seat hgt.

• Midgrade vinyl in proposed manufacturer’s pricing.

• Frame and Back finish: 2 possible finishes

CC2 Nesting Conference Chair

Salient Characteristics: To include minimum of the following specifications:

a. Weight Capacity of a minimum of 300 lbs. steel reinforced seats

b. Arm version with 4‐leg caster base

c. Dual Wheel Casters for carpet

d. Folding Seat with nesting capability

Options

a. Multiple glide/caster options for hard surface, soft surface, rubber flooring or multi‐ function for varying floor types

b. Multiple seat and back materials to include, mesh, plastic, or multi‐density foam cushion seat

c. Textile options ranging from fabric to vinyl to include COM/Healthcare grade fabric and the ability to clean using germicide or bleach solution

d. Moisture barrier fabric backing or barrier wrapped foam

e. Multiple arm styles and materials

f. Wall Saver leg option

g. Flex back option

Warranty: 24/7 Continuous Shift, 10 year part replacement with a 5 year cylinder guarantee

2/5/2022

MTR CODE: CC2

Item: Conf Room chair

Qty: 74 Rooms:

Cheyenne VA Medical Center

MTR CODE: CM1

Item: Storage Credenza, HPL

Qty: 2

Basis of Design:

• Brand Name or Equal: OFS Brand Meeting Room

CC‐2419

• 12 year warranty

• Two 12"W Side Shelves Lift and Lock for additional Work Surface

• Keyboard Drawer‐ Upper section

• (1) Adjustable shelf‐ Lower Section

• Single Locking door‐ Lower Section

• 2.375" Black Nylon Twin Wheel Hooded Casters with Brake

Rooms: E‐103, P2‐135

2/5/2022 Cheyenne VA Medical Center

Cheyenne VA Medical Center CBOC

CM1 Cart, Media, HPL or Metal

Salient Characteristics: To include minimum of the following specifications:

a. Available in size 16”‐24”D x 24”‐48”W, 29”‐36”H

b. Available in HPL with 1mm edge band or Metal.

c. Adjustable shelf in an enclosed space.

d. Lock

e. Available with casters or glides. Casters to have 2 locking casters and 2 non‐ locking casters.

f. Vented door option for media.

g. Opening for power and cable managements with a minimum 2” diameter cutout in the bottom for wire access to floor, or in back for wire access to the wall.

MTR CODE: CM3

Item: Supply Cart

Qty: 50

Basis of Design:

• Brand Name or Equal: Herman Miller Mora Supply Cart

• Corian counter top with spill proof edge

• Corian top includes integral handle

• Keyless entry

• Laminate case

• Case finish applied thru out

• Wall saver function in all directions

• Soft tread casters

• Front casters to lock

CM3 Cart, Medical Supplies Storage and Procedure

Salient Characteristics: To include minimum of the following specifications:

a. Sizes 19”D x 18”W x 36”H

b. Modular system components shall be universal, and the drawers and accessories are interchangeable.

c. Components to have rounded exposed surfaces, free from sharp edges to prevent injury to patients, visitors, and staff.

d. Modular transport carts shall take into account infection control requirements and be fabricated with no exterior cracks, crevices, joints, corners, or angles that may facilitate bacteria.

e. Carts shall be easily moved by one person even when fully loaded. Pull handles are included with double wide carts.

MTR CODE: CM3 (pg 2)

f. Carts shall be made of uniform density, integral, highly durable, impact‐ resistant plastics and are resistant to rust. They are able to withstand cart washing requirements including temperatures up to 160 degrees F, and drain easily after being washed. Color is integrated into the plastic so there is no color chipping, even if surfaces are scratched.

g. Cupboards, overheads, and modular transport carts are lockable and can be keyed alike.

h. Integrated storage module drawers and frame doors shall be available in a minimum of eight colors to allow for color coding.

i. Triple locks on med carts and drawers provide optional security to protect drugs and supplies.

j. Components shall be capable of being assembled by simple hand action without tools, except for those components fastening to architectural elements or modular counter surfaces. These shall be secured with the use of simple hand tools. (i.e. Allen wrench, screwdriver)

k. Storage modules shall have integrally molded drawer/shelf guides at nominal three‐inch vertical increments on both sides of the module.

l. 3, 6, and 9 drawers hold assorted sub containers and dividers to custom fit the customer’s needs

m. Drawers extend fully without wobbling or failing, increasing the efficiency of stocking and restocking

n. Drawer should have an integrally molded drawer glide to function as a handle.

o. Drawers shall have the capability to accept Snap‐On label clips for clinical material designation

MTR CODE: CM3 (pg 3)

p. Drawer glides to have built‐in stops to prevent accidental removal.

q. Sub containers and dividers available for storing small loose or irregularly shaped items.

r. Tops are sturdy, built as part of the cart‐ not a slip on addition.

s. Basic hanging storage modules (frames and lockers)

t. shall have hooks integrally molded to the back. This will allow suspension from horizontal support elements fastened to walls. Integrally molded hooks provide for smooth surfaces to facilitate washing and to prevent the harboring of accumulated dirt.

u. Shelves shall have a continuous molded lip around perimeter to retain liquid spillage and to prevent dislodgment of materials in transport.

v. Wire shelves that are nylon coated and support a load of 50 lbs. option.

w. Wall rails support 250 pounds per linear foot.

x. No special wall construction is necessary when mounting products.

Standard wood or 20 gauge metal anchored studs are required per on layer of 5/8” drywall.

y. Units to be positioned on architectural walls, panel system or lab modules to permit approximately a 10 inch clearance from bottom of unit to floor for cleaning purpose.

z. Casters on mobile storage carts to be a minimum of 4”, all 4 casters swivel and 2 front locking casters.

aa. A minimum of 12 years, 24/7 shift warranty.

Options:

a. Option for wall mounted units that contain the same modular components.A788:B810A783:B810A775:B810B807AA780:B810

MTR CODE: CM3 (pg 4)

Item: Supply Cart Qty: 50 Rooms:

MTR CODE: CM3‐A

Qty: 1

Basis of Design:

• Brand Name or Equal: Herman Miller L‐Cart

• L‐cart (36”h x 23”w) with the following components

• (2) 6” drawers

• (1) 9” drawer

• (2) C‐frames

• (1)24”w counter top

• Colors TBD

CM3 Cart, Medical Supplies Storage and Procedure

Salient Characteristics: To include minimum of the following specifications:

a. Sizes to include 16” – 24”D x 24”W x 36”H

b. Modular system components shall be universal, and the drawers and accessories are interchangeable.

c. Components to have rounded exposed surfaces, free from sharp edges to prevent injury to patients, visitors, and staff.

d. Modular transport carts shall take into account infection control requirements and be fabricated with no exterior cracks, crevices, joints, corners, or angles that may facilitate bacteria.

e. Carts shall be easily moved by one person even when fully loaded. Pull handles are included with double wide carts.

Room: PM‐101

MTR CODE: CM3‐A (pg2)

f. Carts shall be made of uniform density, integral, highly durable, impact‐resistant plastics and are resistant to rust. They are able to withstand cart washing requirements including temperatures up to 160 degrees F, and drain easily after being washed. Color is integrated into the plastic so there is no color chipping, even if surfaces are scratched.

g. Cupboards, overheads, and modular transport carts are lockable and can be keyed alike.

h. Integrated storage module drawers and frame doors shall be available in a minimum of eight colors to allow for color coding.

i. Triple locks on med carts and drawers provide optional security to protect drugs and supplies.

j. Components shall be capable of being assembled by simple hand action without tools, except for those components fastening to architectural elements or modular counter surfaces. These shall be secured with the use of simple hand tools. (i.e. Allen wrench, screwdriver)

k. Storage modules shall have integrally molded drawer/shelf guides at nominal three‐inch vertical increments on both sides of the module.

l. 3, 6, and 9 drawers hold assorted sub containers and dividers to custom fit the customer’s needs

m. Drawers extend fully without wobbling or failing, increasing the efficiency of stocking and restocking

n. Drawer should have an integrally molded drawer glide to function as a handle.

o. Drawers shall have the capability to accept Snap‐On label clips for clinical material designation

MTR CODE: CM3‐B

Item: General Supply Cart

Qty: 1

Basis of Design:

• Brand Name or Equal: Herman Miller Cart 36”h

• Cart body, Sr20 double wide, raised edge top, full spine divider, with the following components

• (1) Set locking doors

• (2) Wire shelves

• (2) Solid shelves

• (4) 6” drawers

• Colors TBD

CM3 Cart, Medical Supplies Storage and Procedure

Salient Characteristics: To include minimum of the following specifications:

a. Sizes to include 23‐24”D x 28‐30”W x 36”H

b. Modular system components shall be universal, and the drawers and accessories are interchangeable.

c. Components to have rounded exposed surfaces, free from sharp edges to prevent injury to patients, visitors, and staff.

d. Modular transport carts shall take into account infection control requirements and be fabricated with no exterior cracks, crevices, joints, corners, or angles that may facilitate bacteria.

e. Carts shall be easily moved by one person even when fully loaded. Pull handles are included with double wide carts.

Room: PM‐101

MTR CODE: CM3‐B (pg 2)

f. Carts shall be made of uniform density, integral, highly durable, impact‐ resistant plastics and are resistant to rust. They are able to withstand cart washing requirements including temperatures up to 160 degrees F, and drain easily after being washed. Color is integrated into the plastic so there is no color chipping, even if surfaces are scratched.

g. Cupboards, overheads, and modular transport carts are lockable and can be keyed alike.

h. Integrated storage module drawers and frame doors shall be available in a minimum of eight colors to allow for color coding.

i. Triple locks on med carts and drawers provide optional security to protect drugs and supplies.

j. Components shall be capable of being assembled by simple hand action without tools, except for those components fastening to architectural elements or modular counter surfaces. These shall be secured with the use of simple hand tools. (i.e. Allen wrench, screwdriver)

k. Storage modules shall have integrally molded drawer/shelf guides at nominal three‐inch vertical increments on both sides of the module.

l. 3, 6, and 9 drawers hold assorted sub containers and dividers to custom fit the customer’s needs

m. Drawers extend fully without wobbling or failing, increasing the efficiency of stocking and restocking

n. Drawer should have an integrally molded drawer glide to function as a handle.

o. Drawers shall have the capability to accept Snap‐On label clips for clinical material designation

MTR CODE: CM3‐B (pg 3)

p. Drawer glides to have built‐in stops to prevent accidental removal.

q. Sub containers and dividers available for storing small loose or irregularly shaped items.

r. Tops are sturdy, built as part of the cart‐ not a slip on addition.

s. Basic hanging storage modules (frames and lockers)

t. shall have hooks integrally molded to the back. This will allow suspension from horizontal support elements fastened to walls. Integrally molded hooks provide for smooth surfaces to facilitate washing and to prevent the harboring of accumulated dirt.

u. Shelves shall have a continuous molded lip around perimeter to retain liquid spillage and to prevent dislodgment of materials in transport.

v. Wire shelves that are nylon coated and support a load of 50 lbs. option.

w. Wall rails support 250 pounds per linear foot.

x. No special wall construction is necessary when mounting products.

Standard wood or 20 gauge metal anchored studs are required per on layer of 5/8” drywall.

y. Units to be positioned on architectural walls, panel system or lab modules to permit approximately a 10 inch clearance from bottom of unit to floor for cleaning purpose.

z. Casters on mobile storage carts to be a minimum of 4”, all 4 casters swivel and 2 front locking casters.

aa. A minimum of 12 years, 24/7 shift warranty.

Options:

a. Option for wall mounted units that contain the same modular components.A788:B810A783:B810A775:B810B807AA780:B810

MTR CODE: CM3‐C

Item: Specialty/Procedure Cart

Qty: 1

Basis of Design:

• Brand Name or Equal: Herman Miller Cart, 36”h

• Cart body, Sr20, raised edge top with the following components

• (1) Locking door

• (1) Wire shelves

• (1) 6” drawer

• full ext drawer slide in top drawer

• Colors TBD

Cart, Medical Supplies Storage and Procedure

Salient Characteristics: To include minimum of the following specifications:

a. Sizes to include 23‐24”D x 28‐30”W x 36”H

b. Modular system components shall be universal, and the drawers and accessories are interchangeable.

c. Components to have rounded exposed surfaces, free from sharp edges to prevent injury to patients, visitors, and staff.

d. Modular transport carts shall take into account infection control requirements and be fabricated with no exterior cracks, crevices, joints, corners, or angles that may facilitate bacteria.

e. Carts shall be easily moved by one person even when fully loaded. Pull handles are included with double wide carts.

Room: MS‐135

MTR CODE: CM3‐C (pg 2)

f. Carts shall be made of uniform density, integral, highly durable, impact‐ resistant plastics and are resistant to rust. They are able to withstand cart washing requirements including temperatures up to 160 degrees F, and drain easily after being washed. Color is integrated into the plastic so there is no color chipping, even if surfaces are scratched.

g. Cupboards, overheads, and modular transport carts are lockable and can be keyed alike.

h. Integrated storage module drawers and frame doors shall be available in a minimum of eight colors to allow for color coding.

i. Triple locks on med carts and drawers provide optional security to protect drugs and supplies.

j. Components shall be capable of being assembled by simple hand action without tools, except for those components fastening to architectural elements or modular counter surfaces. These shall be secured with the use of simple hand tools. (i.e. Allen wrench, screwdriver)

k. Storage modules shall have integrally molded drawer/shelf guides at nominal three‐inch vertical increments on both sides of the module.

l. 3, 6, and 9 drawers hold assorted sub containers and dividers to custom fit the customer’s needs

m. Drawers extend fully without wobbling or failing, increasing the efficiency of stocking and restocking

n. Drawer should have an integrally molded drawer glide to function as a handle.

o. Drawers shall have the capability to accept Snap‐On label clips for clinical material designation

MTR CODE: CM3‐C (pg 3)

p. Drawer glides to have built‐in stops to prevent accidental removal.

q. Sub containers and dividers available for storing small loose or irregularly shaped items.

r. Tops are sturdy, built as part of the cart‐ not a slip on addition.

s. Basic hanging storage modules (frames and lockers)

t. shall have hooks integrally molded to the back. This will allow suspension from horizontal support elements fastened to walls. Integrally molded hooks provide for smooth surfaces to facilitate washing and to prevent the harboring of accumulated dirt.

u. Shelves shall have a continuous molded lip around perimeter to retain liquid spillage and to prevent dislodgment of materials in transport.

v. Wire shelves that are nylon coated and support a load of 50 lbs. option.

w. Wall rails support 250 pounds per linear foot.

x. No special wall construction is necessary when mounting products.

Standard wood or 20 gauge metal anchored studs are required per on layer of 5/8” drywall.

y. Units to be positioned on architectural walls, panel system or lab modules to permit approximately a 10 inch clearance from bottom of unit to floor for cleaning purpose.

z. Casters on mobile storage carts to be a minimum of 4”, all 4 casters swivel and 2 front locking casters.

aa. A minimum of 12 years, 24/7 shift warranty.

Options:

a. Option for wall mounted units that contain the same modular components.A788:B810A783:B810A775:B810B807AA780:B810

MTR CODE: CM3‐D

Qty: 4

Basis of Design:

• Brand Name or Equal: Herman Miller Cart, 42”h

• Cart body, Sr24, raised edge top, pull out shelf, with the following components

• (1) Keyed Lock bar‐ Right

• (5) 10 bin Cassette interior

• Colors TBD

Cart, Medical Supplies Storage and Procedure

Salient Characteristics: To include minimum of the following specifications:

a. Sizes to include 23‐24”D x 28‐30”W x 36”H

b. Modular system components shall be universal, and the drawers and accessories are interchangeable.

c. Components to have rounded exposed surfaces, free from sharp edges to prevent injury to patients, visitors, and staff.

d. Modular transport carts shall take into account infection control requirements and be fabricated with no exterior cracks, crevices, joints, corners, or angles that may facilitate bacteria.

e. Carts shall be easily moved by one person even when fully loaded. Pull handles are included with double wide carts.

Rooms: MS‐105, MS‐107, MS‐134

MS‐136

MTR CODE: CM3‐D (pg 2)

f. Carts shall be made of uniform density, integral, highly durable, impact‐ resistant plastics and are resistant to rust. They are able to withstand cart washing requirements including temperatures up to 160 degrees F, and drain easily after being washed. Color is integrated into the plastic so there is no color chipping, even if surfaces are scratched.

g. Cupboards, overheads, and modular transport carts are lockable and can be keyed alike.

h. Integrated storage module drawers and frame doors shall be available in a minimum of eight colors to allow for color coding.

i. Triple locks on med carts and drawers provide optional security to protect drugs and supplies.

j. Components shall be capable of being assembled by simple hand action without tools, except for those components fastening to architectural elements or modular counter surfaces. These shall be secured with the use of simple hand tools. (i.e. Allen wrench, screwdriver)

k. Storage modules shall have integrally molded drawer/shelf guides at nominal three‐inch vertical increments on both sides of the module.

l. 3, 6, and 9 drawers hold assorted sub containers and dividers to custom fit the customer’s needs

m. Drawers extend fully without wobbling or failing, increasing the efficiency of stocking and restocking

n. Drawer should have an integrally molded drawer glide to function as a handle.

o. Drawers shall have the capability to accept Snap‐On label clips for clinical material designation

MTR CODE: CM3‐D (pg 3)

p. Drawer glides to have built‐in stops to prevent accidental removal.

q. Sub containers and dividers available for storing small loose or irregularly shaped items.

r. Tops are sturdy, built as part of the cart‐ not a slip on addition.

s. Basic hanging storage modules (frames and lockers)

t. shall have hooks integrally molded to the back. This will allow suspension from horizontal support elements fastened to walls. Integrally molded hooks provide for smooth surfaces to facilitate washing and to prevent the harboring of accumulated dirt.

u. Shelves shall have a continuous molded lip around perimeter to retain liquid spillage and to prevent dislodgment of materials in transport.

v. Wire shelves that are nylon coated and support a load of 50 lbs. option.

w. Wall rails support 250 pounds per linear foot.

x. No special wall construction is necessary when mounting products.

Standard wood or 20 gauge metal anchored studs are required per on layer of 5/8” drywall.

y. Units to be positioned on architectural walls, panel system or lab modules to permit approximately a 10 inch clearance from bottom of unit to floor for cleaning purpose.

z. Casters on mobile storage carts to be a minimum of 4”, all 4 casters swivel and 2 front locking casters.

aa. A minimum of 12 years, 24/7 shift warranty.

Options:

a. Option for wall mounted units that contain the same modular components.A788:B810A783:B810A775:B810B807AA780:B810

MTR CODE: CM3‐E

Item: Linen Cart

Qty: 1

Basis of Design:

• Brand Name or Equal: Herman Miller Mora Cart

• Foot Pedal

• Plastic Lid

• Laminate case

• Case finish applied thru out.

• Wall saver function in all directions

• Soft tread casters

• Front casters to lock

CM3 Cart, Medical Supplies Storage and Procedure

Salient Characteristics: To include minimum of the following specifications:

a. Sizes 19”D x 16”W x 36”H

b. Modular system components shall be universal, and the drawers and accessories are interchangeable.

c. Components to have rounded exposed surfaces, free from sharp edges to prevent injury to patients, visitors, and staff.

d. Modular transport carts shall take into account infection control requirements and be fabricated with no exterior cracks, crevices, joints, corners, or angles that may facilitate bacteria.

e. Carts shall be easily moved by one person even when fully loaded. Pull handles are included with double wide carts.

Rooms: MS‐135

MTR CODE: CM3‐E (pg 2)

f. Carts shall be made of uniform density, integral, highly durable, impact‐ resistant plastics and are resistant to rust. They are able to withstand cart washing requirements including temperatures up to 160 degrees F, and drain easily after being washed. Color is integrated into the plastic so there is no color chipping, even if surfaces are scratched.

g. Cupboards, overheads, and modular transport carts are lockable and can be keyed alike.

h. Integrated storage module drawers and frame doors shall be available in a minimum of eight colors to allow for color coding.

i. Triple locks on med carts and drawers provide optional security to protect drugs and supplies.

j. Components shall be capable of being assembled by simple hand action without tools, except for those components fastening to architectural elements or modular counter surfaces. These shall be secured with the use of simple hand tools. (i.e. Allen wrench, screwdriver)

k. Storage modules shall have integrally molded drawer/shelf guides at nominal three‐inch vertical increments on both sides of the module.

l. 3, 6, and 9 drawers hold assorted sub containers and dividers to custom fit the customer’s needs

m. Drawers extend fully without wobbling or failing, increasing the efficiency of stocking and restocking

n. Drawer should have an integrally molded drawer glide to function as a handle.

o. Drawers shall have the capability to accept Snap‐On label clips for clinical material designation

MTR CODE: CM3‐E (pg 3)

p. Drawer glides to have built‐in stops to prevent accidental removal.

q. Sub containers and dividers available for storing small loose or irregularly shaped items.

r. Tops are sturdy, built as part of the cart‐ not a slip on addition.

s. Basic hanging storage modules (frames and lockers)

t. shall have hooks integrally molded to the back. This will allow suspension from horizontal support elements fastened to walls. Integrally molded hooks provide for smooth surfaces to facilitate washing and to prevent the harboring of accumulated dirt.

u. Shelves shall have a continuous molded lip around perimeter to retain liquid spillage and to prevent dislodgment of materials in transport.

v. Wire shelves that are nylon coated and support a load of 50 lbs. option.

w. Wall rails support 250 pounds per linear foot.

x. No special wall construction is necessary when mounting products.

Standard wood or 20 gauge metal anchored studs are required per on layer of 5/8” drywall.

y. Units to be positioned on architectural walls, panel system or lab modules to permit approximately a 10 inch clearance from bottom of unit to floor for cleaning purpose.

z. Casters on mobile storage carts to be a minimum of 4”, all 4 casters swivel and 2 front locking casters.

aa. A minimum of 12 years, 24/7 shift warranty.

Options:

a. Option for wall mounted units that contain the same modular components.A788:B810A783:B810A775:B810B807AA780:B810

MTR CODE: CR1

Item: Storage Credenza, HPL

Qty: 2

Basis of Design:

• Brand Name or Equal: OFS Brand Intermix CC‐M7136BCC

• 12 year warranty

• Square Edge

Rooms: L‐102, P1‐136

CR1 Storage Credenzas, HPL

Salient Characteristics: To include minimum of the following specifications:

a. Variety of sizes including 72”W, x 20””D x 36”H

b. A variety of edge details to include but not limited to Square, Knife, Bevel Radius and Bullnose

c. Design matches conference table

d. Hinged door(s) and sliding door(s) option.

e. Locks required

f. Adjustable shelves in 1” increments.

g. A minimum 12 year warranty

Options:

a. Pulls and knob options for doors and drawers.

b. Frosted Glass/Acrylic Door option. Glass to be tempered.

c. Drawer storage option.

d. Option with vented cabinet for media

e. Worksurface Grommet option

MTR CODE: CS2

Item: Monitor Arm, dual

Qty: 299

Basis of Design:

• Brand Name or Equal: Humanscale M/Flex for M2.1 Monitor Arm

• Dual Bracket for 2 Monitors

• Two‐Piece Clamp Mount

• Silver Trim

• Both Arms 8" Straight Link/Dynamic Link

• Standard Monitor Tile (one per monitor)

• Both Vesa Plates Standard 100mm x 100mm, gray

• 12" high Post

CS2 Computer Support Tools‐Monitor Arms

Salient Characteristics: To include minimum of the following specifications:

a. Adaptable to single or double

b. Gas assists lifting, one finger adjustment and 360 degree movement

c. Quick release monitor holder

d. Mounting option to include C‐clamp, bolt‐through, grommet and wall mount

e. Wire management down arm

f. Dual monitor arms move independent from each other

g. Dual monitor arms position two screens side by side with minimum gap

h. A minimum of 10 year warranty

Options:

a. Double pivot or Dual Joint Monitor arm allows for turning monitor 180 degrees

b. Sit‐to‐stand monitor arm option

c. Dual tandem monitor arm option

d. Triple monitor arm with independent movement or tandem option

MTR CODE: CS2

Item: Monitor Arm, dual

Qty: 299 Rooms:

MTR CODE: CS2‐A

Item: Monitor Arm‐ Dual

Qty: 13

Basis of Design:

• Brand Name or Equal: Humanscale M/Flex for M2.1 Monitor Arm

• Dual Bracket for 2 Monitors

• Bolt Through or Grommet Mount‐ Dealer required to drill grommet in field

• Silver Trim

• Both Arms 8" Straight Link/Dynamic Link

• Standard Monitor Tile (one per monitor)

• Both Vesa Plates Standard 100mm x 100mm, gray

• 12" high Post

CS2 Computer Support Tools‐Monitor Arms

Salient Characteristics: To include minimum of the following specifications:

a. Adaptable to single or double

b. Gas assists lifting, one finger adjustment and 360 degree movement

c. Quick release monitor holder

d. Mounting option to include C‐clamp, bolt‐through, grommet and wall mount

e. Wire management down arm

f. Dual monitor arms move independent from each other

g. Dual monitor arms position two screens side by side with minimum gap

h. A minimum of 10 year warranty

Options:

a. Double pivot or Dual Joint Monitor arm allows for turning monitor 180 degrees

b. Sit‐to‐stand monitor arm option

c. Dual tandem monitor arm option

d. Triple monitor arm with independent movement or tandem option

2/5/2022 Cheyenne VA Medical Center

Cheyenne VA Medical Center CBOC

Rooms: E‐103, L‐107, L‐115, P101, P102, PM‐100

SO‐101. SO‐102

MTR CODE: CS4

Item: Wall Mounted Workstation

Qty: 2

Basis of Design:

• Brand Name or Equal: Humanscale V6 V657‐0011‐13000

• 57”H Wall mounted Track

• Dual Independent Adjustable Arms

• Keyboard surface and arm‐ extends 42" from wall

• Laptop shelf‐ for docking station

• Integrated cable mgmt. system

• Quick release on monitors

• Warranty 5 year, 24/7

• Manufacturer requested to install unit

CS4 Computer Support Tools‐Wall Mount Workstation

Salient Characteristics: To include minimum of the following specifications:

a. Sit to stand height adjustment of 27‐57” high (+/‐ 1") or separate keyboard and monitor mounts in a single wall track

b. Extension arms to allow 36”‐ 56” (+/‐ 1") extension into room with 2 dynamic pivot joints to allow user to turn 90 degrees to wall

c. Fold flat against wall to store in 8” (+/‐ 1") Or less depth

d. Weight capacity up to 20 lb.

e. Independent monitor and keyboard height adjustments

f. Internal cable management

g. Keyboard and mouse platform to accommodate both functions on a single surface with integral cord catcher, cushioned palm rest of cleanable material, and integral pull handle

h. Fabricated of powder coated steel or aluminum frame, inherently anti‐ microbial

Options :

a. Pivot limiter

b. CPU Holder for top or bottom mount

c. Writing surface

Room: PM‐101

MTR CODE: CS4‐A

Item: Wall Mounted Workstation

CS4 Computer Support Tools‐Wall Mount Workstation

Salient Characteristics: To include minimum of the following specifications:

a. Sit to stand height adjustment of 27‐57” high (+/‐ 1") or separate keyboard and monitor mounts in a single wall track

b. Extension arms to allow 36”‐ 56” (+/‐ 1") extension into room with 2 dynamic pivot joints to allow user to turn 90 degrees to wall

c. Fold flat against wall to store in 8” (+/‐ 1") Or less depth

d. Weight capacity up to 20 lb.

e. Independent monitor and keyboard height adjustments

f. Internal cable management

g. Keyboard and mouse platform to accommodate both functions on a single surface with integral cord catcher, cushioned palm rest of cleanable material, and integral pull handle

h. Fabricated of powder coated steel or aluminum frame, inherently anti‐ microbial

Options :

a. Pivot limiter

b. CPU Holder for top or bottom mount

c. Writing surface

Qty: 2

Basis of Design:

• Brand Name or Equal: Humanscale V6 V657‐0011‐13000

• 57”H Wall mounted Track

• Single Independent Adjustable Arm

• Keyboard surface and arm‐ extends 42" from wall

• Laptop shelf‐ for docking station

• Integrated cable mgmt. system

• Quick release on monitors

• Warranty 5 year, 24/7

• Manufacturer requested to install unit

Rooms: RS‐102, RS‐106

MTR CODE: CT1

Item: Flip‐top Table

Qty: 8

Basis of Design:

• Brand Name or Equal: OFS Brand Applause A7224R

• Deuce Base flip and nest offset column base (AFC)

• 12 year warranty

• Square Edge

• Wire management

• Power Source from floor boxes

• Power, plug in end required (PS‐84S, PWF3, SCJ72)

Rooms: E‐103, P2‐135

CT1 Conference Table, HPL

Salient Characteristics: To include minimum of the following specifications:

a. A variety of top sizes to include 72”” Long 24” Deep

b. A variety of shapes to include round, rectangle, boat, sight line,

c. A variety of HPL options including wood grain and non‐wood grain with hard wood edging option.

d. A variety of edge details to include but not limited to, T‐Mold/Edgeband, Square and Knife.

e. Power/USB/data/voice port options with the option of grommet hole(s) and cover, Power Island, troughs or power cove(s).

f. Power options to be corded or hardwired.

g. Wire management underneath conference table.

h. A variety of bases to include metal, wood, powder coated, cylinder, Panel, four post, and rectangle.

i. Leveling glides for carpet or hard floors

Options:

a. Casters

b. Coordinating Storage Credenza and Tower options

MTR CODE: CT1‐A

Item: Flip‐top Table

Qty: 2

Basis of Design:

• Brand Name or Equal: OFS Brand Applause A6024R

• Deuce Base flip and nest offset column base (AFC)

• 12 year warranty

• Square Edge

• Wire management

• Power Source from floor boxes

• Power, plug in end required (PS‐84S, PWF3, SCJ72)

Rooms: E‐103

CT1 Conference Table, HPL

Salient Characteristics: To include minimum of the following specifications:

a. A variety of top sizes to include 72”” Long 24” Deep

b. A variety of shapes to include round, rectangle, boat, sight line,

c. A variety of HPL options including wood grain and non‐wood grain with hard wood edging option.

d. A variety of edge details to include but not limited to, T‐Mold/Edgeband, Square and Knife.

e. Power/USB/data/voice port options with the option of grommet hole(s) and cover, Power Island, troughs or power cove(s).

f. Power options to be corded or hardwired.

g. Wire management underneath conference table.

h. A variety of bases to include metal, wood, powder coated, cylinder, Panel, four post, and rectangle.

i. Leveling glides for carpet or hard floors

Options:

a. Casters

b. Coordinating Storage Credenza and Tower options

MTR CODE: CT1‐B

Item: Collaboration Table, high

Qty: 2

Basis of Design:

• Brand Name or Equal: OFS Brand Kintra

• 72”w x 36”d x 36”h

• Top 2.25” thick

• Wire mgmt end panels

• No Power cut outs

• Waterfall edge

2/5/2022 ERNEST CHILDERS CBOC PROJECT 32

CT1 Conference Table, HPL

Salient Characteristics: To include minimum of the following specifications:

a. A variety of top sizes to include 36” – 240” Long 30”‐ 60” Deep

b. A variety of shapes to include round, rectangle, boat, sight line,

c. A variety of HPL options including wood grain and non‐wood grain with hard wood edging option.

d. A variety of edge details to include but not limited to, T‐Mold/Edgeband, Square and Knife.

e. Power/USB/data/voice port options with the option of grommet hole(s) and cover, Power Island, troughs or power cove(s).

f. Power options to be corded or hardwired.

g. Wire management underneath conference table.

h. A variety of bases to include metal, wood, powder coated, cylinder, Panel, four post, and rectangle.

i. Leveling glides for carpet or hard floors

Options:

a. Casters

b. Coordinating Storage Credenza and Tower options

Rooms: L‐105, L‐109

MTR CODE: CT1‐C

Item: Collaboration Table

Qty: 2

Basis of Design:

• Brand Name or Equal: OFS Brand Kintra

• 72”w x 36”d x 30”h

• Top 2.25” thick

• Wire mgmt end panels

• Power cut out on both ends

• (2) power modules with (1) 12 amp outlet, (2)USB ports, silver, 9’ power cord

• Waterfall edge

2/5/2022 ERNEST CHILDERS CBOC PROJECT 33

CT1 Conference Table, HPL

Salient Characteristics: To include minimum of the following specifications:

a. A variety of top sizes to include 36” – 240” Long 30”‐ 60” Deep

b. A variety of shapes to include round, rectangle, boat, sight line,

c. A variety of HPL options including wood grain and non‐wood grain with hard wood edging option.

d. A variety of edge details to include but not limited to, T‐Mold/Edgeband, Square and Knife.

e. Power/USB/data/voice port options with the option of grommet hole(s) and cover, Power Island, troughs or power cove(s).

f. Power options to be corded or hardwired.

g. Wire management underneath conference table.

h. A variety of bases to include metal, wood, powder coated, cylinder, Panel, four post, and rectangle.

i. Leveling glides for carpet or hard floors

Options:

a. Casters

b. Coordinating Storage Credenza and Tower options

Rooms: L‐105, L‐109

MTR CODE: DA1

Item: Work Tools

Qty: 163

Basis of Design:

• Brand Name or Equal: Herman Miller UBI work tools, 15”w shelf with backdrop and USB power module

• #YT300.1508SBL 15”w x 8”d shelf with surface clamp, backdrop and insert

• Color: TBD

DA1 Desk Accessories‐ Slat Wall, Rail and freestanding tools

Salient Characteristics: To include minimum of the following specifications:

a. Widths in 24”‐60”, 12”‐18” High

b. Must be able to mount on system furniture panels, wall mount and be available freestanding

c. Minimum support weight shall be 60 lbs

d. Variety of work/organizing tools meeting 5 of the folling 13 items; binder holder, letter tray, pen/pencil cup, double square dish, hanging brackets, paper manager, utility hook, slat shelf dividers, universal shelf, telephone caddy, marker board, glove box/tissue box holder, and tack strip

e. Made with heavy duty plastic in a variety of colors to match system’s furniture.

f. 10 year warranty

MTR CODE: DA1

Item: Work Tools

Qty: 163 Rooms:

MTR CODE: DA1‐A

Item: Side Screen

Qty: 12 (5 left, 7 Right)

Basis of Design:

• Brand Name or Equal: Herman Miller Pari Delineation Screen

• Tackable, thin and frameless screen

• Mounted to worksurface side

• 46” h x 30” d, Sits 17.5” above the worksurface

• Fabric: Midgrade in proposed manufacturer’s pricing

DA1 Desk Accessories‐ Slat Wall, Rail and freestanding tools

Salient Characteristics: To include minimum of the following specifications:

a. Widths in 24”‐60”, 12”‐18” High

b. Must be able to mount on system furniture panels, wall mount and be available freestanding

c. Minimum support weight shall be 60 lbs

d. Variety of work/organizing tools meeting 5 of the folling 13 items; binder holder, letter tray, pen/pencil cup, double square dish, hanging brackets, paper manager, utility hook, slat shelf dividers, universal shelf, telephone caddy, marker board, glove box/tissue box holder, and tack strip

e. Made with heavy duty plastic in a variety of colors to match system’s furniture.

f. 10 year warranty

2/5/2022 Cheyenne VA Medical Center

Cheyenne VA Medical Center CBOC

Rooms: BS‐100, D‐109, L‐107, PM‐105, PS‐100

VS‐101

MTR CODE: DA1‐B

Item: Privacy Screen, 60”w

Qty: 13

Basis of Design:

• Brand Name or Equal: Herman Miller Pari Privacy Screen for Hgt Adj Tables Y1116.D60R

• Tackable, thin and frameless screen

• Mounted to worksurface back edge

• 60”w, Sits 17.5” above the worksurface and 10” below surface (R)

• With cable management trough

• Fabric: Midgrade in proposed manufacturer’s pricing

DA1 Desk Accessories‐ Slat Wall, Rail and freestanding tools

Salient Characteristics: To include minimum of the following specifications:

a. Widths in 24”‐60”, 12”‐18” High

b. Must be able to mount on system furniture panels, wall mount and be available freestanding

c. Minimum support weight shall be 60 lbs

d. Variety of work/organizing tools meeting 5 of the folling 13 items; binder holder, letter tray, pen/pencil cup, double square dish, hanging brackets, paper manager, utility hook, slat shelf dividers, universal shelf, telephone caddy, marker board, glove box/tissue box holder, and tack strip

e. Made with heavy duty plastic in a variety of colors to match system’s furniture.

f. 10 year warranty

Rooms: D‐107, D‐109, ES‐100, MH‐108, MH‐116, MS‐106, P1‐135B, PS‐101

MTR CODE: DA1‐C

Item: Privacy Screen, 54”w

Qty: 13

Basis of Design:

• Brand Name or Equal: Herman Miller Modesty Panel for Hgt Adj Tables

FV694.P12A54

• Translucent Plastic

• Mounted to worksurface back edge

• 54”w, Sits 12” below the worksurface

• Finish : TBD

DA1 Desk Accessories‐ Slat Wall, Rail and freestanding tools

Salient Characteristics: To include minimum of the following specifications:

a. Widths in 54”, 12”‐18” High

b. Must be able to mount on system furniture panels, wall mount and be available freestanding

c. Minimum support weight shall be 60 lbs

d. Variety of work/organizing tools meeting 5 of the folling 13 items; binder holder, letter tray, pen/pencil cup, double square dish, hanging brackets, paper manager, utility hook, slat shelf dividers, universal shelf, telephone caddy, marker board, glove box/tissue box holder, and tack strip

e. Made with heavy duty plastic in a variety of colors to match system’s furniture.

f. 10 year warranty

Rooms: AS‐103, AS‐105, AS‐106, AS‐107, AS‐109, AS‐111, AS‐113, L‐102, MS‐112, MS‐114, P‐104, P‐105

MTR CODE: DA1‐D

Item: Power Module, Clamp Mounted

Qty: 283

Basis of Design:

• Brand Name or Equal: Herman Miller Logic Power Unit Y1423.AA06

• Clamp Mount

• 2 Simplex Receptacles, 2 USB Ports

• 6 foot plug in power cord

• Finish : TBD

DA1 Desk Accessories‐ Slat Wall, Rail and freestanding tools

Salient Characteristics: To include minimum of the following specifications:

a. Widths in 24”‐60”, 12”‐18” High

b. Must be able to mount on system furniture panels, wall mount and be available freestanding

c. Minimum support weight shall be 60 lbs

d. Variety of work/organizing tools meeting 5 of the folling 13 items; binder holder, letter tray, pen/pencil cup, double square dish, hanging brackets, paper manager, utility hook, slat shelf dividers, universal shelf, telephone caddy, marker board, glove box/tissue box holder, and tack strip

e. Made with heavy duty plastic in a variety of colors to match system’s furniture.

f. 10 year warranty

MTR CODE: DA1‐D

Item: Power Module, Clamp Mounted

Qty: 283 Rooms:

MTR CODE: DC2

Item: Glass Markerboard

Qty: 25

Basis of Design:

• Brand Name or Equal: Clarus

• Float magnetic Glass whiteboard, with T‐Tray, set of 6 square gray magnets

• Glass ¼” thick, 36”h x 48” w

• Finish: Pure White C100

• Edgework: Flat Polish‐ No frame

• No graphics

DC2 Display/Communication Board‐Magnetic White Board

Salient Characteristics: To include minimum of the following specifications:

a. White porcelain enamel fused to 28 gauge steel

b. Glare reducing surface option for use as projection screen with 60‐70% glare reduction.

c. Anodized aluminum frame

d. Radius corners and edges

e. No use of metal bottom projecting rails/trays

f. Wall mount concealed hardware and fasteners to be included

g. 20 year warranty

Options:

a. Integrated map rail

MTR CODE: DC2

Qty: 25 Rooms:

MTR CODE: DC2‐A

Qty: 2

Basis of Design:

• Brand Name or Equal: Clarus

• Float magnetic Glass whiteboard, with T‐Tray, set of 6 square gray magnets

• Glass ¼” thick, 48”h x 72” w

• Finish: Pure White C100

• Edgework: Flat Polish‐ No frame

• No graphics

DC2 Display/Communication Board‐Magnetic White Board

Salient Characteristics: To include minimum of the following specifications:

a. White porcelain enamel fused to 28 gauge steel

b. Glare reducing surface option for use as projection screen with 60‐70% glare reduction.

c. Anodized aluminum frame

d. Radius corners and edges

e. No use of metal bottom projecting rails/trays

f. Wall mount concealed hardware and fasteners to be included

g. 20 year warranty

Options:

a. Integrated map rail

Room: ES‐100

MTR CODE: DT1

Item: Break Room Table

Basis of Design:

• Brand Name or Equal: Herman Miller Everywhere DT1BS.4242LX

• Square 42”W x 42”D x 30”H

• Top : HPL laminate, 1.1875” thick with matching 3mm polypropylene edge

• HPL color TBD

• Edge color to match top

• Base finish: TBD

DT1 Dining Table, HPL, Pedestal Base

Salient Characteristics: To include minimum of the following specifications:

a. Variety of sizes and shapes, 24”‐60” square, 24”‐60” round, 24”‐30”W x 36”‐60”L rectangle.

b. Variety of Pedestal base options, powder coated frames, and Polished Chrome option.

c. Leveling glides that won’t scratch or mar the floor.

d. Table top edge profiles to include but not limited to, T‐molding, No drip, Fluted, Square, Reverse knife, wood bullnose.

Options:

a. Pneumatic Height adjustable option

b. Cafe height option at 38”‐42” with foot ring

c. Wheelchair height option.

d. Flip‐top Mechanism option.

e. Solid Surface top option.

f. Custom Graphic top option

Qty: 4

Rooms: P2‐136, P3‐136

MTR CODE: DT1‐A

Basis of Design:

• Brand Name or Equal: Herman Miller Everywhere DT1CS.36LX

• Round table with 4 column base

• 36” round x 30”H

• Top : HPL laminate, 1.1875” thick with matching 3mm polypropylene edge

• HPL color TBD

• Edge color to match top

• Base finish: TBD

DT1 Dining Table, HPL, Pedestal Base

Salient Characteristics: To include minimum of the following specifications:

a. Variety of sizes and shapes, 24”‐60” square, 24”‐60” round, 24”‐30”W x 36”‐60”L rectangle.

b. Variety of Pedestal base options, powder coated frames, and Polished Chrome option.

c. Leveling glides that won’t scratch or mar the floor.

d. Table top edge profiles to include but not limited to, T‐molding, No drip, Fluted, Square, Reverse knife, wood bullnose.

Options:

a. Pneumatic Height adjustable option

b. Cafe height option at 38”‐42” with foot ring

c. Wheelchair height option.

d. Flip‐top Mechanism option.

e. Solid Surface top option.

f. Custom Graphic top option

Qty: 16

Rooms: AS‐115, C‐100, MH‐114, MS‐106, PL‐102, PM‐105, SS‐101, VS‐101

MTR CODE: DT1‐B

Basis of Design:

• Brand Name or Equal: Herman Miller Everywhere

• Round table with 4 column base

• 30” round x 30”H

• Top : HPL laminate, 1.1875” thick with matching 3mm polypropylene edge

• HPL color TBD

• Edge color to match top

• Base finish: TBD

DT1 Dining Table, HPL, Pedestal Base

Salient Characteristics: To include minimum of the following specifications:

a. Variety of sizes and shapes, 24”‐60” square, 24”‐60” round, 24”‐30”W x 36”‐60”L rectangle.

b. Variety of Pedestal base options, powder coated frames, and Polished Chrome option.

c. Leveling glides that won’t scratch or mar the floor.

d. Table top edge profiles to include but not limited to, T‐molding, No drip, Fluted, Square, Reverse knife, wood bullnose.

Options:

a. Pneumatic Height adjustable option

b. Cafe height option at 38”‐42” with foot ring

c. Wheelchair height option.

d. Flip‐top Mechanism option.

e. Solid Surface top option.

f. Custom Graphic top option

Qty: 1

Room: D‐109

MTR CODE: DT1‐C

Basis of Design:

• Brand Name or Equal: Herman Miller Everywhere DT3CS.30LX

• Round table with 4 column base

• 30” round x 42”H

• Top : HPL laminate, 1.1875” thick with matching 3mm polypropylene edge

• HPL color TBD

• Edge color to match top

• Base finish: TBD

DT1 Dining Table, HPL, Pedestal Base

Salient Characteristics: To include minimum of the following specifications:

a. Variety of sizes and shapes, 24”‐60” square, 24”‐60” round, 24”‐30”W x 36”‐60”L rectangle.

b. Variety of Pedestal base options, powder coated frames, and Polished Chrome option.

c. Leveling glides that won’t scratch or mar the floor.

d. Table top edge profiles to include but not limited to, T‐molding, No drip, Fluted, Square, Reverse knife, wood bullnose.

Options:

a. Pneumatic Height adjustable option

b. Cafe height option at 38”‐42” with foot ring

c. Wheelchair height option.

d. Flip‐top Mechanism option.

e. Solid Surface top option.

f. Custom Graphic top option

Qty: 7

Rooms: C‐100, SS‐101

MTR CODE: DT2

Basis of Design:

• Brand Name or Equal: National Waveworks Epic Table WWN3072WSSDL

• Rectangular, H bases CBV3034HBS

• 72W” x 30”D x 36”H

• Top : HPL laminate, 1.9/16” thick with matching softened PVC edge

• HPL color TBD

• Edge color to match top

• Base finish: TBD

Qty: 4

Rooms: C‐100, SS‐101

DT2 Dining Table, Leg Base, HPL

Salient Characteristics: To include minimum of the following specifications:

a. Variety of sizes and shapes, 24”‐60” square, 24”‐60” round, 24”‐30”W x 36”‐60”L rectangle.

b. Stationary legs on all four corners, 3 post for 24”‐30” Diameter tables.

c. Leg Finish: Powder Coated, polished chrome, or laminate.

d. Leveling glides that won’t scratch or mar the floor.

e. Table top edge profiles to include but not limited to, T‐molding, No drip, Fluted, Square, Reverse knife, wood bullnose.

Options:

a. Wheelchair height option.

b. Folding mechanism free of pinch points, operable with one hand.

c. Solid Surface top option.

MTR CODE: DT2‐A

Basis of Design:

• Brand Name or Equal: National Waveworks Epic Table WWN3048WSSDL

• Rectangular, H bases CBV3028HBS

• 48W” x 30”D x 29”H

• Top : HPL laminate, 1‐9/16” thick with matching softened PVC edge

• HPL color TBD

• Edge color to match top

• Base finish: TBD

Qty: 4

Rooms: C‐100, SS‐101

DT2 Dining Table, Leg Base, HPL

Salient Characteristics: To include minimum of the following specifications:

a. Variety of sizes and shapes, 24”‐60” square, 24”‐60” round, 24”‐30”W x 36”‐60”L rectangle.

b. Stationary legs on all four corners, 3 post for 24”‐30” Diameter tables.

c. Leg Finish: Powder Coated, polished chrome, or laminate.

d. Leveling glides that won’t scratch or mar the floor.

e. Table top edge profiles to include but not limited to, T‐molding, No drip, Fluted, Square, Reverse knife, wood bullnose.

Options:

a. Wheelchair height option.

b. Folding mechanism free of pinch points, operable with one hand.

c. Solid Surface top option.

MTR CODE: DT2‐B

Basis of Design:

• Brand Name or Equal: National Waveworks Epic Table WWN3048WSSDL

• Rectangular, H bases CBV3034HBS

• 48W” x 30”D x 36”H

• Top : HPL laminate, 1.9/16” thick with matching softened PVC edge

• HPL color TBD

• Edge color to match top

• Base finish: TBD

Qty: 1

Room: SS‐101

DT2 Dining Table, Leg Base, HPL

Salient Characteristics: To include minimum of the following specifications:

a. Variety of sizes and shapes, 24”‐60” square, 24”‐60” round, 24”‐30”W x 36”‐60”L rectangle.

b. Stationary legs on all four corners, 3 post for 24”‐30” Diameter tables.

c. Leg Finish: Powder Coated, polished chrome, or laminate.

d. Leveling glides that won’t scratch or mar the floor.

e. Table top edge profiles to include but not limited to, T‐molding, No drip, Fluted, Square, Reverse knife, wood bullnose.

Options:

a. Wheelchair height option.

b. Folding mechanism free of pinch points, operable with one hand.

c. Solid Surface top option.

MTR CODE: GC1

Item: Folding Chair (Exam Rms)

Qty: 52

Basis of Design:

• Brand Name or Equal: Wieland , Perk chair and Smart rail

• Resin, upholstered folding chair and wall mount.

• 20” w x 22.75 dx 32.5 h/ 18” seat hgt.

• Multiple fabrics on each chair

• Fabric: Must be bleach cleanable, hospital grade vinyl or polyurethane. Midgrade in proposed manufacturer’s pricing.

• Warranty 10 years

GC1 Basic Guest Chair

Salient Characteristics: To include minimum of the following specifications:

a. Built‐in cleanout

b. Weight Capacity of a minimum of 300 lbs. steel reinforced seats

c. Non‐marring glide

Options

a. Self leveling glide

b. Multiple seat materials to include, mesh, plastic, or multi‐density foam cushion seat

c. Textile options ranging from fabric to vinyl to include COM/Healthcare grade fabric and the ability to clean using germicide or bleach solution

d. Moisture barrier fabric backing and barrier wrapped foam

e. 4‐Leg chair with or without arms

f. Steel Tube Legs and Arms, with powder coat silver metallic finish option

g. Ability to stack

h. Wall Saver leg option

Accessories:

Transport or Storage Cart with two swivel and two fixed hard rubber casters

Warranty: 24/7 Continuous Shift, 10 year part replacement

MTR CODE: GC1 (pg2)

Item: Folding Chair (Exam Rms)

Qty: 52 Rooms:

MTR CODE: GC1‐A

Item: Break Room Chair

Basis of Design:

• Brand Name or Equal: Sit On It Lumin 1011FT1.PS

• 4 Leg, no arms

• Plastic Seat and plastic perforated back

• 21.3”w x 22.6”d x 33.4” h , seat ht 17.9”

GC1 Basic Guest Chair

Salient Characteristics: To include minimum of the following specifications:

a. Built‐in cleanout

b. Weight Capacity of a minimum of 300 lbs. steel reinforced seats

c. Non‐marring glide

O…