Minimum Technical Requirements For Healthcare Furniture Attachment 2 Rev.xlsx

XLSX spreadsheet 204 KB Posted Apr 21, 2022

Attached to: 7110--Amend 001 RFQ Northern Colorado VA Clinic Furniture
Solicitation number: 36C25922Q0242
Issued by: Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 19

View the file

Other files

File	Type	Posted
36C25922Q0242 0001.docx	DOCX document	Apr 29, 2022
Statement of Work NOCO VA Clinic Furniture.docx	DOCX document	Apr 29, 2022
Questions and Answers.docx	DOCX document	Apr 29, 2022
BASIS OF DESIGN ELEVATIONS.pdf	PDF	Apr 21, 2022
FULL BASIS OF DESIGN FURNITURE PLAN.pdf	PDF	Apr 21, 2022
BASIS OF DESIGN AUDIOLOGY.pdf	PDF	Apr 21, 2022
BASIS OF DESIGN PACT FURNITURE PLAN.pdf	PDF	Apr 21, 2022
BASIS OF DESIGN PHARMACY.pdf	PDF	Apr 21, 2022
SEC C FURNITURE DESIGN PLAN.pdf	PDF	Apr 21, 2022
SEC B FURNITURE DESIGN PLAN.pdf	PDF	Apr 21, 2022
BASIS OF DESIGN EXERCISE TREAMENT AREA.pdf	PDF	Apr 21, 2022
SEC D FURNITURE DESIGN PLAN.pdf	PDF	Apr 21, 2022
SEC A FURNITURE DESIGN PLAN.pdf	PDF	Apr 21, 2022
VA NOCO BASIS OF DESIGN CUT SHEETS 020522.pdf	PDF	Apr 21, 2022
S02 Healthcare Furniture Services Attachment 1.docx	DOCX document	Apr 21, 2022
DESIGN LAB LAYOUT.pdf	PDF	Apr 21, 2022
36C25922Q0242.docx	DOCX document	Apr 21, 2022

Show all 17

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Sheet1

	Attachment II
Category: Casegoods Modular Desking
	GENERAL REQUIREMENTS FOR MODULAR DESKING SYSTEMS:
	a. Available in a variety of configurations with non- handed options to make Single desks, L shape Desks, U-shaped stations, as well as storage components.
	b. Coordinating Storage components to be utilized in waiting, conference, training, and other spaces to include wardrobe, storage towers, double door storage cabinets, low storage credenzas, TV cabinets, Mobile Pedestals, lateral files, and bookcases.
	c. Multiple lock options (Interchangeable in field, master key must be available for facility) All cabinets keyed with one lock number or any combination of key numbers at no extra cost
	d. Warranty: Limited lifetime
	e. Surfaces must be cleanable with hospital grade germicides and bleach solutions without harm to finishes.
	f. Vendor must be able to accommodate special requests and unique requirements.
	g. Master key must be available upon request
	h. Contain a minimum 50% recycled content.
	i. Meet SCS Indoor Air Quality standard.
MD1	Modular Desking System- HPL, Freestanding	MTR Quatity
	Salient Characteristics: To include minimum of the following specifications:	1
	a. Meet ANSI/BIFMA supporting loads.
	b. HPL tops and components of minimum 1” thick particleboard or MDF with moisture balancing backing sheet, pre-drilled metal to metal connections, and minimum 3mm vinyl T-mold or Thermoform edge in colors to match a variety of HPL tops to include solid colors, woodgrain, and flecked finished.
	c. Upper Storage component construction to be nominal 5/8” thick particle board or MDF substrate with HPL covering, 1mm edge banding, metal to metal connections, full adjustable hinges, locks available,
	d. Pedestal and drawer construction to be 5/8” thick particle board or MDF substrate with HPL covering, 1mm edge banding, metal to metal connections; integral file rails; locking; have noise dampening closures; and have 1” minimum adjustable floor glides with nylon foot. Staples are not acceptable.
	e. Full extension steel ball bearing suspension;
	f. Available in 2 depths to fit under 24” and 30”d tops
	g. BBF, FF, lateral file, multi- file, and Mobile pedestal configurations
	h. Drawer interiors to be clear finished MDF, wood, or laminate covered plywood with same material drawer bottoms. Paperboard is not acceptable.
	i. Lateral file drawer construction to be 5/8” thick particle board or MDF substrate with HPL covering, 1mm edge banding, metal to metal connections; integral file rails; locking; have noise dampening closures; and have 1” minimum adjustable floor glides with nylon foot. Staples are not acceptable.
	j. Lateral files must be available in widths from 30” – 42”
	k. Full extension steel ball bearing suspension
	l. Drawer interiors to be clear finished MDF, wood, or laminate covered plywood with same material drawer bottoms. Paperboard is not acceptable.
	Options:
	a. Modesty panels offered in frosted glass, perforated metal, patterned acrylic or glazing options.
	b. Door insert options of frosted or patterned acrylic and metal frame design.
	c. Option for mounting shall be freestanding and wall mounted.
	d. Drawer fronts and pulls to be field replaceable
MD1-A	Modular Desking System- HPL, Freestanding	MTR Quatity
	Salient Characteristics: To include minimum of the following specifications:	1
	a. Meet ANSI/BIFMA supporting loads.
	b. HPL tops and components of minimum 1” thick particleboard or MDF with moisture balancing backing sheet, pre-drilled metal to metal connections, and minimum 3mm vinyl T-mold or Thermoform edge in colors to match a variety of HPL tops to include solid colors, woodgrain, and flecked finished.
	c. Upper Storage component construction to be nominal 5/8” thick particle board or MDF substrate with HPL covering, 1mm edge banding, metal to metal connections, full adjustable hinges, locks available,
	d. Pedestal and drawer construction to be 5/8” thick particle board or MDF substrate with HPL covering, 1mm edge banding, metal to metal connections; integral file rails; locking; have noise dampening closures; and have 1” minimum adjustable floor glides with nylon foot. Staples are not acceptable.
	e. Full extension steel ball bearing suspension;
	f. Available in 2 depths to fit under 24” and 30”d tops
	g. BBF, FF, lateral file, multi- file, and Mobile pedestal configurations
	h. Drawer interiors to be clear finished MDF, wood, or laminate covered plywood with same material drawer bottoms. Paperboard is not acceptable.
	i. Lateral file drawer construction to be 5/8” thick particle board or MDF substrate with HPL covering, 1mm edge banding, metal to metal connections; integral file rails; locking; have noise dampening closures; and have 1” minimum adjustable floor glides with nylon foot. Staples are not acceptable.
	j. Lateral files must be available in widths from 30” – 42”
	k. Full extension steel ball bearing suspension
	l. Drawer interiors to be clear finished MDF, wood, or laminate covered plywood with same material drawer bottoms. Paperboard is not acceptable.
	Options:
	a. Modesty panels offered in frosted glass, perforated metal, patterned acrylic or glazing options.
	b. Door insert options of frosted or patterned acrylic and metal frame design.
	c. Option for mounting shall be freestanding and wall mounted.
	d. Drawer fronts and pulls to be field replaceable
MD1-B	Modular Desking System- HPL, Freestanding	MTR Quatity
	Salient Characteristics: To include minimum of the following specifications:	1
	a. Meet ANSI/BIFMA supporting loads.
	b. HPL tops and components of minimum 1” thick particleboard or MDF with moisture balancing backing sheet, pre-drilled metal to metal connections, and minimum 3mm vinyl T-mold or Thermoform edge in colors to match a variety of HPL tops to include solid colors, woodgrain, and flecked finished.
	c. Upper Storage component construction to be nominal 5/8” thick particle board or MDF substrate with HPL covering, 1mm edge banding, metal to metal connections, full adjustable hinges, locks available,
	d. Pedestal and drawer construction to be 5/8” thick particle board or MDF substrate with HPL covering, 1mm edge banding, metal to metal connections; integral file rails; locking; have noise dampening closures; and have 1” minimum adjustable floor glides with nylon foot. Staples are not acceptable.
	e. Full extension steel ball bearing suspension;
	f. Available in 2 depths to fit under 24” and 30”d tops
	g. BBF, FF, lateral file, multi- file, and Mobile pedestal configurations
	h. Drawer interiors to be clear finished MDF, wood, or laminate covered plywood with same material drawer bottoms. Paperboard is not acceptable.
	i. Lateral file drawer construction to be 5/8” thick particle board or MDF substrate with HPL covering, 1mm edge banding, metal to metal connections; integral file rails; locking; have noise dampening closures; and have 1” minimum adjustable floor glides with nylon foot. Staples are not acceptable.
	j. Lateral files must be available in widths from 30” – 42”
	k. Full extension steel ball bearing suspension
	l. Drawer interiors to be clear finished MDF, wood, or laminate covered plywood with same material drawer bottoms. Paperboard is not acceptable.
	Options:
	a. Modesty panels offered in frosted glass, perforated metal, patterned acrylic or glazing options.
	b. Door insert options of frosted or patterned acrylic and metal frame design.
	c. Option for mounting shall be freestanding and wall mounted.
	d. Drawer fronts and pulls to be field replaceable
MD2	Modular Desking System- HPL tops with Metal Components, Freestanding	MTR Quatity
	Salient Characteristics: To include minimum of the following specifications:	1
	a. Meet ANSI/BIFMA supporting loads.
	b. HPL tops and components of minimum 1” thick particleboard or MDF with moisture balancing backing sheet, pre-drilled metal to metal connections, and minimum 3mm vinyl T-mold or Thermoform edge in colors to match a variety of HPL tops to include solid colors, woodgrain, and flecked finished.
	c. Upper Storage component construction to be of 22 gauge cold rolled steel frame or better with powder coat paint; 18 gauge cold rolled steel or better sheet steel door and shelf with front and rear channel to hold task light; rear back stop; full adjustable hinges (if applicable) or lift assist pneumatic flipper door opening; noise dampening closure and locks available. Mounting options shall be freestanding or wall mounted.
	d. Pedestal and drawer construction to be of 22 gauge cold rolled steel frame or better with powder coat paint; 18 gauge cold rolled steel or better sheet steel drawer fronts; full extension telescoping steel ball bearing suspension; integral filing rails; locking; available in 2 depths to fit under 24” and 30”d tops; BBF, FF, lateral file, multi-file, and Mobile pedestal configurations; and have 1” minimum adjustable floor glides with nylon foot.
	Options:
	a. Modesty panels offered in frosted glass, perforated metal, patterned acrylic or glazing options.
	b. Door insert options of frosted or patterned acrylic and metal frame design.
	c. Option for mounting shall be freestanding and wall mounted.
	d. Drawer fronts and pulls to be field replaceable
MD2-A	Modular Desking System- HPL tops with Metal Components, Freestanding	MTR Quatity
	Salient Characteristics: To include minimum of the following specifications:	4
	a. Meet ANSI/BIFMA supporting loads.
	b. HPL tops and components of minimum 1” thick particleboard or MDF with moisture balancing backing sheet, pre-drilled metal to metal connections, and minimum 3mm vinyl T-mold or Thermoform edge in colors to match a variety of HPL tops to include solid colors, woodgrain, and flecked finished.
	c. Upper Storage component construction to be of 22 gauge cold rolled steel frame or better with powder coat paint; 18 gauge cold rolled steel or better sheet steel door and shelf with front and rear channel to hold task light; rear back stop; full adjustable hinges (if applicable) or lift assist pneumatic flipper door opening; noise dampening closure and locks available. Mounting options shall be freestanding or wall mounted.
	d. Pedestal and drawer construction to be of 22 gauge cold rolled steel frame or better with powder coat paint; 18 gauge cold rolled steel or better sheet steel drawer fronts; full extension telescoping steel ball bearing suspension; integral filing rails; locking; available in 2 depths to fit under 24” and 30”d tops; BBF, FF, lateral file, multi-file, and Mobile pedestal configurations; and have 1” minimum adjustable floor glides with nylon foot.
	Options:
	a. Modesty panels offered in frosted glass, perforated metal, patterned acrylic or glazing options.
	b. Door insert options of frosted or patterned acrylic and metal frame design.
	c. Option for mounting shall be freestanding and wall mounted.
	d. Drawer fronts and pulls to be field replaceable
MD2-B	Modular Desking System- HPL tops with Metal Components, Freestanding	MTR Quatity
	Salient Characteristics: To include minimum of the following specifications:	10
	a. Meet ANSI/BIFMA supporting loads.
	b. HPL tops and components of minimum 1” thick particleboard or MDF with moisture balancing backing sheet, pre-drilled metal to metal connections, and minimum 3mm vinyl T-mold or Thermoform edge in colors to match a variety of HPL tops to include solid colors, woodgrain, and flecked finished.
	c. Upper Storage component construction to be of 22 gauge cold rolled steel frame or better with powder coat paint; 18 gauge cold rolled steel or better sheet steel door and shelf with front and rear channel to hold task light; rear back stop; full adjustable hinges (if applicable) or lift assist pneumatic flipper door opening; noise dampening closure and locks available. Mounting options shall be freestanding or wall mounted.
	d. Pedestal and drawer construction to be of 22 gauge cold rolled steel frame or better with powder coat paint; 18 gauge cold rolled steel or better sheet steel drawer fronts; full extension telescoping steel ball bearing suspension; integral filing rails; locking; available in 2 depths to fit under 24” and 30”d tops; BBF, FF, lateral file, multi-file, and Mobile pedestal configurations; and have 1” minimum adjustable floor glides with nylon foot.
	Options:
	a. Modesty panels offered in frosted glass, perforated metal, patterned acrylic or glazing options.
	b. Door insert options of frosted or patterned acrylic and metal frame design.
	c. Option for mounting shall be freestanding and wall mounted.
	d. Drawer fronts and pulls to be field replaceable
MD2-C	Modular Desking System- HPL tops with Metal Components, Freestanding	MTR Quatity
	Salient Characteristics: To include minimum of the following specifications:	5
	a. Meet ANSI/BIFMA supporting loads.
	b. HPL tops and components of minimum 1” thick particleboard or MDF with moisture balancing backing sheet, pre-drilled metal to metal connections, and minimum 3mm vinyl T-mold or Thermoform edge in colors to match a variety of HPL tops to include solid colors, woodgrain, and flecked finished.
	c. Upper Storage component construction to be of 22 gauge cold rolled steel frame or better with powder coat paint; 18 gauge cold rolled steel or better sheet steel door and shelf with front and rear channel to hold task light; rear back stop; full adjustable hinges (if applicable) or lift assist pneumatic flipper door opening; noise dampening closure and locks available. Mounting options shall be freestanding or wall mounted.
	d. Pedestal and drawer construction to be of 22 gauge cold rolled steel frame or better with powder coat paint; 18 gauge cold rolled steel or better sheet steel drawer fronts; full extension telescoping steel ball bearing suspension; integral filing rails; locking; available in 2 depths to fit under 24” and 30”d tops; BBF, FF, lateral file, multi-file, and Mobile pedestal configurations; and have 1” minimum adjustable floor glides with nylon foot.
	Options:
	a. Modesty panels offered in frosted glass, perforated metal, patterned acrylic or glazing options.
	b. Door insert options of frosted or patterned acrylic and metal frame design.
	c. Option for mounting shall be freestanding and wall mounted.
	d. Drawer fronts and pulls to be field replaceable
Category: Filing and Storage
	GENERAL REQUIREMENTS FOR ALL FILING AND STORAGE:
	a. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet
	b. Limited Lifetime Warranty for parts and labor
	c. Multiple lock options (Interchangeable in field, master key must be available for facility) All cabinets keyed with one lock number or any combination of key numbers at no extra cost
	d. Contribute to LEED points
	GENERAL REQUIREMENTS FOR ALL VERTICAL AND LATERAL FILING AND STORAGE:
	a. A variety of heights based on drawer modules 2H, 3H, 4H, and 5H.
	b. Module heights must be available in multiple heights.
	c. Interior components for side to side or front to back filing rails, removable and interchangeable.
	d. Drawer pull options that meet ADA Accessibility Guidelines.
	e. Smooth or textured steel paint options to match most major metal furniture manufacturers.
	f. 20 gauge steel minimum construction.
LF1	File, Lateral, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	28
	a. 5H units may be comprised of a flip top retractable drawer face on the top module.
	b. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	c. Counterweight option must be able to be added in the field
	d. Ability to add on modules in the field
	e. Multiple base heights
	f. Positive interlock safety function allowing only one drawer to open at a time
	g. Drawers shall operate with full extension, telescoping, steel ball-bearing slides for full access to all drawer contents and smooth operation
	h. Leveling Glides that provide 1" adjustment range
	Options:
	a. Optional posting shelf
	b. Optional label holders
	c. Common top options to span over multiple units in either HPL or wood
	d. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
LF1-A	File, Lateral, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	42
	a. 5H units may be comprised of a flip top retractable drawer face on the top module.
	b. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	c. Counterweight option must be able to be added in the field
	d. Ability to add on modules in the field
	e. Multiple base heights
	f. Positive interlock safety function allowing only one drawer to open at a time
	g. Drawers shall operate with full extension, telescoping, steel ball-bearing slides for full access to all drawer contents and smooth operation
	h. Leveling Glides that provide 1" adjustment range
	Options:
	a. Optional posting shelf
	b. Optional label holders
	c. Common top options to span over multiple units in either HPL or wood
	d. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
LF1-B	File, Lateral, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	17
	a. 5H units may be comprised of a flip top retractable drawer face on the top module.
	b. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	c. Counterweight option must be able to be added in the field
	d. Ability to add on modules in the field
	e. Multiple base heights
	f. Positive interlock safety function allowing only one drawer to open at a time
	g. Drawers shall operate with full extension, telescoping, steel ball-bearing slides for full access to all drawer contents and smooth operation
	h. Leveling Glides that provide 1" adjustment range
	Options:
	a. Optional posting shelf
	b. Optional label holders
	c. Common top options to span over multiple units in either HPL or wood
	d. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
LF1-C	File, Lateral, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	2
	a. 5H units may be comprised of a flip top retractable drawer face on the top module.
	b. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	c. Counterweight option must be able to be added in the field
	d. Ability to add on modules in the field
	e. Multiple base heights
	f. Positive interlock safety function allowing only one drawer to open at a time
	g. Drawers shall operate with full extension, telescoping, steel ball-bearing slides for full access to all drawer contents and smooth operation
	h. Leveling Glides that provide 1" adjustment range
	Options:
	a. Optional posting shelf
	b. Optional label holders
	c. Common top options to span over multiple units in either HPL or wood
	d. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
LF1-D	File, Lateral, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	2
	a. 5H units may be comprised of a flip top retractable drawer face on the top module.
	b. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	c. Counterweight option must be able to be added in the field
	d. Ability to add on modules in the field
	e. Multiple base heights
	f. Positive interlock safety function allowing only one drawer to open at a time
	g. Drawers shall operate with full extension, telescoping, steel ball-bearing slides for full access to all drawer contents and smooth operation
	h. Leveling Glides that provide 1" adjustment range
	Options:
	a. Optional posting shelf
	b. Optional label holders
	c. Common top options to span over multiple units in either HPL or wood
	d. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
LF1-E	File, Lateral, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	1
	a. 5H units may be comprised of a flip top retractable drawer face on the top module.
	b. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	c. Counterweight option must be able to be added in the field
	d. Ability to add on modules in the field
	e. Multiple base heights
	f. Positive interlock safety function allowing only one drawer to open at a time
	g. Drawers shall operate with full extension, telescoping, steel ball-bearing slides for full access to all drawer contents and smooth operation
	h. Leveling Glides that provide 1" adjustment range
	Options:
	a. Optional posting shelf
	b. Optional label holders
	c. Common top options to span over multiple units in either HPL or wood
	d. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
LF1-F	File, Lateral, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	3
	a. 5H units may be comprised of a flip top retractable drawer face on the top module.
	b. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	c. Counterweight option must be able to be added in the field
	d. Ability to add on modules in the field
	e. Multiple base heights
	f. Positive interlock safety function allowing only one drawer to open at a time
	g. Drawers shall operate with full extension, telescoping, steel ball-bearing slides for full access to all drawer contents and smooth operation
	h. Leveling Glides that provide 1" adjustment range
	Options:
	a. Optional posting shelf
	b. Optional label holders
	c. Common top options to span over multiple units in either HPL or wood
	d. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
LF1-G	File, Lateral, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	1
	a. 5H units may be comprised of a flip top retractable drawer face on the top module.
	b. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	c. Counterweight option must be able to be added in the field
	d. Ability to add on modules in the field
	e. Multiple base heights
	f. Positive interlock safety function allowing only one drawer to open at a time
	g. Drawers shall operate with full extension, telescoping, steel ball-bearing slides for full access to all drawer contents and smooth operation
	h. Leveling Glides that provide 1" adjustment range
	Options:
	a. Optional posting shelf
	b. Optional label holders
	c. Common top options to span over multiple units in either HPL or wood
	d. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
LF2	File, Lateral, HPL	12
	Salient Characteristics: To include minimum of the following specifications:
	a. Availabe 36” wide and 20” deep (+/-2”)
	b. Counterweight required
	c. Positive interlock safety function allowing only one drawer to open at a time
	d. Drawers shall operate with full extension, telescoping, steel ball-bearing slides for full access to all drawer contents and smooth operation
	e. Leveling Glides that provide 1" adjustment range
	Options:
	a. Common top options to span over multiple units in either HPL or wood
	b. Additional widths and depths available
LK1-A	Lockers, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	4
	a. Variety of openings ranging from box to full height lockers (1 Tier, 2 Tier, 3 Tier, 4 Tier, 5 Tier and box openings)
	b. Available in 12 – 18” depth and 12” wide
	c. Hooks to be zinc plated forged steel, ball ends.
	d. Ventilated doors
	e. Multiple lock options including personal padlock hasps, integrated key or integrated combination lock
	f. Individual locker identification (numbers, letters, or combination)
	g. 16 gauge steel minimum construction
	h. Leveling Glides that provide 1" adjustment range
	Options:
	a. Interior shelf option for full height opening
	b. Variety of powder coated finish colors
	c. Factory assembled option
	d. ADA Compliant lockers (recessed handles with multi- point latch) option
	e. Additional accessories such as base enclosures, sloped top
	f. Filer panel offered as needed
LK1-B	Lockers, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	4
	a. Variety of openings ranging from box to full height lockers (1 Tier, 2 Tier, 3 Tier, 4 Tier, 5 Tier and box openings)
	b. Available in 12 – 18” depth and 12” wide
	c. Hooks to be zinc plated forged steel, ball ends.
	d. Ventilated doors
	e. Multiple lock options including personal padlock hasps, integrated key or integrated combination lock
	f. Individual locker identification (numbers, letters, or combination)
	g. 16 gauge steel minimum construction
	h. Leveling Glides that provide 1" adjustment range
	Options:
	a. Interior shelf option for full height opening
	b. Variety of powder coated finish colors
	c. Factory assembled option
	d. ADA Compliant lockers (recessed handles with multi- point latch) option
	e. Additional accessories such as base enclosures, sloped top
	f. Filer panel offered as needed
LK1-L	Lockers, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	49
	a. Variety of openings ranging from box to full height lockers (1 Tier, 2 Tier, 3 Tier, 4 Tier, 5 Tier and box openings)
	b. Available in 12 – 18” depth and 12” wide
	c. Hooks to be zinc plated forged steel, ball ends.
	d. Ventilated doors
	e. Multiple lock options including personal padlock hasps, integrated key or integrated combination lock
	f. Individual locker identification (numbers, letters, or combination)
	g. 16 gauge steel minimum construction
	h. Leveling Glides that provide 1" adjustment range
	Options:
	a. Interior shelf option for full height opening
	b. Variety of powder coated finish colors
	c. Factory assembled option
	d. ADA Compliant lockers (recessed handles with multi- point latch) option
	e. Additional accessories such as base enclosures, sloped top
	f. Filer panel offered as needed
LK1-R	Lockers, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	34
	a. Variety of openings ranging from box to full height lockers (1 Tier, 2 Tier, 3 Tier, 4 Tier, 5 Tier and box openings)
	b. Available in 12 – 18” depth and 12” wide
	c. Hooks to be zinc plated forged steel, ball ends.
	d. Ventilated doors
	e. Multiple lock options including personal padlock hasps, integrated key or integrated combination lock
	f. Individual locker identification (numbers, letters, or combination)
	g. 16 gauge steel minimum construction
	h. Leveling Glides that provide 1" adjustment range
	Options:
	a. Interior shelf option for full height opening
	b. Variety of powder coated finish colors
	c. Factory assembled option
	d. ADA Compliant lockers (recessed handles with multi- point latch) option
	e. Additional accessories such as base enclosures, sloped top
	f. Filer panel offered as needed
SC1	Storage Cabinet, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	4
	a. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	b. Counterweight option must be able to be added in the field
	c. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet
	d. Smooth or textured steel paint options to match most major metal furniture manufacturers
	e. Ability to add on modules in the field
	f. Multiple base heights from a minimum of 1” to 4” (+/- ¼”)
	g. Leveling Glides that provide 1" adjustment range
	h. 16 gauge steel minimum construction
	i. 180 degree door swing
	Options:
	a. Door pull options that meet ADA Accessibility Guidelines
	b. Common top options to span over multiple units in either laminate or wood
	c. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
SC1-A	Storage Cabinet, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	18
	a. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	b. Counterweight option must be able to be added in the field
	c. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet
	d. Smooth or textured steel paint options to match most major metal furniture manufacturers
	e. Ability to add on modules in the field
	f. Multiple base heights from a minimum of 1” to 4” (+/- ¼”)
	g. Leveling Glides that provide 1" adjustment range
	h. 16 gauge steel minimum construction
	i. 180 degree door swing
	Options:
	a. Door pull options that meet ADA Accessibility Guidelines
	b. Common top options to span over multiple units in either laminate or wood
	c. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
SC1-B	Storage Cabinet, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	2
	a. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	b. Counterweight option must be able to be added in the field
	c. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet
	d. Smooth or textured steel paint options to match most major metal furniture manufacturers
	e. Ability to add on modules in the field
	f. Multiple base heights from a minimum of 1” to 4” (+/- ¼”)
	g. Leveling Glides that provide 1" adjustment range
	h. 16 gauge steel minimum construction
	i. 180 degree door swing
	Options:
	a. Door pull options that meet ADA Accessibility Guidelines
	b. Common top options to span over multiple units in either laminate or wood
	c. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
SC1-C	Storage Cabinet, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	20
	a. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	b. Counterweight option must be able to be added in the field
	c. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet
	d. Smooth or textured steel paint options to match most major metal furniture manufacturers
	e. Ability to add on modules in the field
	f. Multiple base heights from a minimum of 1” to 4” (+/- ¼”)
	g. Leveling Glides that provide 1" adjustment range
	h. 16 gauge steel minimum construction
	i. 180 degree door swing
	Options:
	a. Door pull options that meet ADA Accessibility Guidelines
	b. Common top options to span over multiple units in either laminate or wood
	c. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
SC1-D	Storage Cabinet, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	6
	a. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	b. Counterweight option must be able to be added in the field
	c. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet
	d. Smooth or textured steel paint options to match most major metal furniture manufacturers
	e. Ability to add on modules in the field
	f. Multiple base heights from a minimum of 1” to 4” (+/- ¼”)
	g. Leveling Glides that provide 1" adjustment range
	h. 16 gauge steel minimum construction
	i. 180 degree door swing
	Options:
	a. Door pull options that meet ADA Accessibility Guidelines
	b. Common top options to span over multiple units in either laminate or wood
	c. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
SC1-E	Storage Cabinet, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	1
	a. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	b. Counterweight option must be able to be added in the field
	c. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet
	d. Smooth or textured steel paint options to match most major metal furniture manufacturers
	e. Ability to add on modules in the field
	f. Multiple base heights from a minimum of 1” to 4” (+/- ¼”)
	g. Leveling Glides that provide 1" adjustment range
	h. 16 gauge steel minimum construction
	i. 180 degree door swing
	Options:
	a. Door pull options that meet ADA Accessibility Guidelines
	b. Common top options to span over multiple units in either laminate or wood
	c. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
SC1-F	Storage Cabinet, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	1
	a. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	b. Counterweight option must be able to be added in the field
	c. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet
	d. Smooth or textured steel paint options to match most major metal furniture manufacturers
	e. Ability to add on modules in the field
	f. Multiple base heights from a minimum of 1” to 4” (+/- ¼”)
	g. Leveling Glides that provide 1" adjustment range
	h. 16 gauge steel minimum construction
	i. 180 degree door swing
	Options:
	a. Door pull options that meet ADA Accessibility Guidelines
	b. Common top options to span over multiple units in either laminate or wood
	c. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
SC1-G	Storage Cabinet, Metal	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	4
	a. A variety of widths 30”, 36” and 42” wide and 18” or 20” depths (+/- ¼”)
	b. Counterweight option must be able to be added in the field
	c. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet
	d. Smooth or textured steel paint options to match most major metal furniture manufacturers
	e. Ability to add on modules in the field
	f. Multiple base heights from a minimum of 1” to 4” (+/- ¼”)
	g. Leveling Glides that provide 1" adjustment range
	h. 16 gauge steel minimum construction
	i. 180 degree door swing
	Options:
	a. Door pull options that meet ADA Accessibility Guidelines
	b. Common top options to span over multiple units in either laminate or wood
	c. Additional modules for combination storage such as sliding door, double swing door or open shelving (bookcase)
SC2	Storage Cabinet, HPL	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	77
	a. Adjustable interior shelves
	b. Variety of heights to accommodate quantity of shelves needed
	c. 36”w x 15”d (+/- 3”)
	d. Universal box construction with finished tops, end panels and back panels
	e. Locking hinged doors
	f. Shelf height adjustability on 1” increments (+/- ½”)
	g. Must offer varying types of file storage such as drawers and open shelving for top tab and end tab record type storage via modular components as an option
	h. Leveling Glides that provide 1" adjustment range
SC2-A	Storage Cabinet, HPL	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	63
	a. Adjustable interior shelves
	b. Variety of heights to accommodate quantity of shelves needed
	c. 36”w x 15”d (+/- 3”)
	d. Universal box construction with finished tops, end panels and back panels
	e. Locking hinged doors
	f. Shelf height adjustability on 1” increments (+/- ½”)
	g. Must offer varying types of file storage such as drawers and open shelving for top tab and end tab record type storage via modular components as an option
	h. Leveling Glides that provide 1" adjustment range	MTR Quantity
SH1	Shelving, Metal L&T	6
	Salient Characteristics: To include minimum of the following specifications:
	a. Lock in place post and shelf system
	b. Variety of heights to accommodate types of file sizes and quantity of shelves needed
	c. Variety of widths ranging from 24 – 48” wide and depth of 10 – 36” deep
	d. Shelf height adjustability on 1” increments (+/- ½”)
	e. Must offer varying types of file storage such as drawers and open shelving for top tab and end tab record type storage via modular components
	f. Add on units that eliminate the duplication of full frame
	g. 18 gauge steel minimum construction
	h. Leveling Glides that provide 1" adjustment range
	i. Solid or slotted shelves
	j. HPL Common top options to span over multiple units
	k. Shelf dividers
	l. Variety of paint colors
	Options:
	a. Posting shelf, drawer or door options
	b. Closed back option
SH1-A	Shelving, Metal L&T	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	5
	a. Lock in place post and shelf system
	b. Variety of heights to accommodate types of file sizes and quantity of shelves needed
	c. Variety of widths ranging from 24 – 48” wide and depth of 10 – 36” deep
	d. Shelf height adjustability on 1” increments (+/- ½”)
	e. Must offer varying types of file storage such as drawers and open shelving for top tab and end tab record type storage via modular components
	f. Add on units that eliminate the duplication of full frame
	g. 18 gauge steel minimum construction
	h. Leveling Glides that provide 1" adjustment range
	i. Solid or slotted shelves
	j. HPL Common top options to span over multiple units
	k. Shelf dividers
	l. Variety of paint colors
	Options:
	a. Posting shelf, drawer or door options
	b. Closed back option
SH1-C	Shelving, Metal L&T	2
	Salient Characteristics: To include minimum of the following specifications:
	a. Lock in place post and shelf system
	b. Variety of heights to accommodate types of file sizes and quantity of shelves needed
	c. Variety of widths ranging from 24 – 48” wide and depth of 10 – 36” deep
	d. Shelf height adjustability on 1” increments (+/- ½”)
	e. Must offer varying types of file storage such as drawers and open shelving for top tab and end tab record type storage via modular components
	f. Add on units that eliminate the duplication of full frame
	g. 18 gauge steel minimum construction
	h. Leveling Glides that provide 1" adjustment range
	i. Solid or slotted shelves
	j. HPL Common top options to span over multiple units
	k. Shelf dividers
	l. Variety of paint colors
	Options:
	a. Posting shelf, drawer or door options
	b. Closed back option
SH1-D	Shelving, Metal L&T	6
	Salient Characteristics: To include minimum of the following specifications:
	a. Lock in place post and shelf system
	b. Variety of heights to accommodate types of file sizes and quantity of shelves needed
	c. Variety of widths ranging from 24 – 48” wide and depth of 10 – 36” deep
	d. Shelf height adjustability on 1” increments (+/- ½”)
	e. Must offer varying types of file storage such as drawers and open shelving for top tab and end tab record type storage via modular components
	f. Add on units that eliminate the duplication of full frame
	g. 18 gauge steel minimum construction
	h. Leveling Glides that provide 1" adjustment range
	i. Solid or slotted shelves
	j. HPL Common top options to span over multiple units
	k. Shelf dividers
	l. Variety of paint colors
	Options:
	a. Posting shelf, drawer or door options
	b. Closed back option
Category: Modular Cabinetry
	GENERAL REQUIREMENTS FOR MODULAR MILLWORK AND CASEGOODS :
	a. Surfaces must be cleanable with hospital grade germicides and bleach solutions without harm to finishes.
	b. Contributes to LEED points
	c. Warranty- Limited Lifetime
MM1	Modular Millwork
	Salient Characteristics: To include minimum of the following specifications:	1
	a. A component based line of cabinetry and coordinating work tops to be used in labs, patient rooms, storage rooms, pharmacy, supply areas, break rooms, dayrooms, and limited office spaces to supply a “built- in” look while maintaining the quality and flexibility of a modular approach.
	b. A wide variety of fully modular cabinet components available for upper and lower storage on 6” modules, allowing cabinets to be moved and reconfigured.
	c. Cabinets constructed of HPL or thermoform over a ½” minimal thickness low VOC substrate with all edges sealed with matching edge-band or thermo-formed radius edges.
	d. Cabinet interiors fully melamine or LPL lined with no exposed substrate.
	e. Drawer construction options of standard box type with replaceable drawer front and unitary interior box for use in healthcare.
	f. Full extension steel ball bearing drawer glides.
	g. Adjustable 4 way hinges.
	h. Adjustable height shelving, fully wrapped melamine surface.
	i. Work top surface options of HPL, Solid Surface, Chemical resistant HPL, epoxy resin, and Phenolic surfaces.
	j. Integral seamless backsplash, caulked and sealed at side seams and at wall.
	k. Integral sink and set in sink options.
	l. Ability to coordinate with building plumbing and medical gases.
MM1-A	Modular Millwork	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	8
	a. A component based line of cabinetry and coordinating work tops to be used in labs, patient rooms, storage rooms, pharmacy, supply areas, break rooms, dayrooms, and limited office spaces to supply a “built- in” look while maintaining the quality and flexibility of a modular approach.
	b. A wide variety of fully modular cabinet components available for upper and lower storage on 6” modules, allowing cabinets to be moved and reconfigured.
	c. Cabinets constructed of HPL or thermoform over a ½” minimal thickness low VOC substrate with all edges sealed with matching edge-band or thermo-formed radius edges.
	d. Cabinet interiors fully melamine or LPL lined with no exposed substrate.
	e. Drawer construction options of standard box type with replaceable drawer front and unitary interior box for use in healthcare.
	f. Full extension steel ball bearing drawer glides.
	g. Adjustable 4 way hinges.
	h. Adjustable height shelving, fully wrapped melamine surface.
	i. Work top surface options of HPL, Solid Surface, Chemical resistant HPL, epoxy resin, and Phenolic surfaces.
	j. Integral seamless backsplash, caulked and sealed at side seams and at wall.
	k. Integral sink and set in sink options.
	l. Ability to coordinate with building plumbing and medical gases.
MM1-B	Modular Millwork	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	1
	a. A component based line of cabinetry and coordinating work tops to be used in labs, patient rooms, storage rooms, pharmacy, supply areas, break rooms, dayrooms, and limited office spaces to supply a “built- in” look while maintaining the quality and flexibility of a modular approach.
	b. A wide variety of fully modular cabinet components available for upper and lower storage on 6” modules, allowing cabinets to be moved and reconfigured.
	c. Cabinets constructed of HPL or thermoform over a ½” minimal thickness low VOC substrate with all edges sealed with matching edge-band or thermo-formed radius edges.
	d. Cabinet interiors fully melamine or LPL lined with no exposed substrate.
	e. Drawer construction options of standard box type with replaceable drawer front and unitary interior box for use in healthcare.
	f. Full extension steel ball bearing drawer glides.
	g. Adjustable 4 way hinges.
	h. Adjustable height shelving, fully wrapped melamine surface.
	i. Work top surface options of HPL, Solid Surface, Chemical resistant HPL, epoxy resin, and Phenolic surfaces.
	j. Integral seamless backsplash, caulked and sealed at side seams and at wall.
	k. Integral sink and set in sink options.
	l. Ability to coordinate with building plumbing and medical gases.
MM1-C	Modular Millwork	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	1
	a. A component based line of cabinetry and coordinating work tops to be used in labs, patient rooms, storage rooms, pharmacy, supply areas, break rooms, dayrooms, and limited office spaces to supply a “built- in” look while maintaining the quality and flexibility of a modular approach.
	b. A wide variety of fully modular cabinet components available for upper and lower storage on 6” modules, allowing cabinets to be moved and reconfigured.
	c. Cabinets constructed of HPL or thermoform over a ½” minimal thickness low VOC substrate with all edges sealed with matching edge-band or thermo-formed radius edges.
	d. Cabinet interiors fully melamine or LPL lined with no exposed substrate.
	e. Drawer construction options of standard box type with replaceable drawer front and unitary interior box for use in healthcare.
	f. Full extension steel ball bearing drawer glides.
	g. Adjustable 4 way hinges.
	h. Adjustable height shelving, fully wrapped melamine surface.
	i. Work top surface options of HPL, Solid Surface, Chemical resistant HPL, epoxy resin, and Phenolic surfaces.
	j. Integral seamless backsplash, caulked and sealed at side seams and at wall.
	k. Integral sink and set in sink options.
	l. Ability to coordinate with building plumbing and medical gases.
MM1-D	Modular Millwork	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	2
	a. A component based line of cabinetry and coordinating work tops to be used in labs, patient rooms, storage rooms, pharmacy, supply areas, break rooms, dayrooms, and limited office spaces to supply a “built- in” look while maintaining the quality and flexibility of a modular approach.
	b. A wide variety of fully modular cabinet components available for upper and lower storage on 6” modules, allowing cabinets to be moved and reconfigured.
	c. Cabinets constructed of HPL or thermoform over a ½” minimal thickness low VOC substrate with all edges sealed with matching edge-band or thermo-formed radius edges.
	d. Cabinet interiors fully melamine or LPL lined with no exposed substrate.
	e. Drawer construction options of standard box type with replaceable drawer front and unitary interior box for use in healthcare.
	f. Full extension steel ball bearing drawer glides.
	g. Adjustable 4 way hinges.
	h. Adjustable height shelving, fully wrapped melamine surface.
	i. Work top surface options of HPL, Solid Surface, Chemical resistant HPL, epoxy resin, and Phenolic surfaces.
	j. Integral seamless backsplash, caulked and sealed at side seams and at wall.
	k. Integral sink and set in sink options.
	l. Ability to coordinate with building plumbing and medical gases.
MM1-E	Modular Millwork	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	1
	a. A component based line of cabinetry and coordinating work tops to be used in labs, patient rooms, storage rooms, pharmacy, supply areas, break rooms, dayrooms, and limited office spaces to supply a “built- in” look while maintaining the quality and flexibility of a modular approach.
	b. A wide variety of fully modular cabinet components available for upper and lower storage on 6” modules, allowing cabinets to be moved and reconfigured.
	c. Cabinets constructed of HPL or thermoform over a ½” minimal thickness low VOC substrate with all edges sealed with matching edge-band or thermo-formed radius edges.
	d. Cabinet interiors fully melamine or LPL lined with no exposed substrate.
	e. Drawer construction options of standard box type with replaceable drawer front and unitary interior box for use in healthcare.
	f. Full extension steel ball bearing drawer glides.
	g. Adjustable 4 way hinges.
	h. Adjustable height shelving, fully wrapped melamine surface.
	i. Work top surface options of HPL, Solid Surface, Chemical resistant HPL, epoxy resin, and Phenolic surfaces.
	j. Integral seamless backsplash, caulked and sealed at side seams and at wall.
	k. Integral sink and set in sink options.
	l. Ability to coordinate with building plumbing and medical gases.
MM1-F	Modular Millwork	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	19
	a. A component based line of cabinetry and coordinating work tops to be used in labs, patient rooms, storage rooms, pharmacy, supply areas, break rooms, dayrooms, and limited office spaces to supply a “built- in” look while maintaining the quality and flexibility of a modular approach.
	b. A wide variety of fully modular cabinet components available for upper and lower storage on 6” modules, allowing cabinets to be moved and reconfigured.
	c. Cabinets constructed of HPL or thermoform over a ½” minimal thickness low VOC substrate with all edges sealed with matching edge-band or thermo-formed radius edges.
	d. Cabinet interiors fully melamine or LPL lined with no exposed substrate.
	e. Drawer construction options of standard box type with replaceable drawer front and unitary interior box for use in healthcare.
	f. Full extension steel ball bearing drawer glides.
	g. Adjustable 4 way hinges.
	h. Adjustable height shelving, fully wrapped melamine surface.
	i. Work top surface options of HPL, Solid Surface, Chemical resistant HPL, epoxy resin, and Phenolic surfaces.
	j. Integral seamless backsplash, caulked and sealed at side seams and at wall.
	k. Integral sink and set in sink options.
	l. Ability to coordinate with building plumbing and medical gases.
MM1-G	Modular Millwork	MTR Quantity
	Salient Characteristics: To include minimum of the following specifications:	1
	a. A component based line of cabinetry and coordinating work tops to be used in labs, patient rooms, storage rooms, pharmacy, supply areas, break rooms, dayrooms, and limited office spaces to supply a “built- in” look while maintaining the quality and flexibility of a modular approach.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Apr 21, 2022.