TS-2663-1101135-B7.doc

Jet Propulsion Laboratory

California Institute of Technology

Security Requirements for a Classified Subcontract (RFP Attachment B-7)

The following security requirements will be required for work on the Classified Specimen Subcontract. No pre-award access to classified information will be required.

Level of Facility clearance required:

Safeguarding capability required:

Access requirements:

(Note: Only the items check-marked below apply.)

FORMCHECKBOX

2. Will the subcontractor receive classified documents or other material for reference only (no generation)?

FORMCHECKBOX

FORMCHECKBOX

FORMCHECKBOX

FORMCHECKBOX

FORMCHECKBOX

6.

Will the subcontractor require access to IPO information?

FORMCHECKBOX

FORMCHECKBOX

7.

Will the subcontract require access to restricted data?

FORMCHECKBOX

FORMCHECKBOX

8.

Will the subcontract require access to classified COMSEC information?

FORMCHECKBOX

FORMCHECKBOX

9.

Will the subcontract require cryptographic access authorization?

FORMCHECKBOX

FORMCHECKBOX

10.

Will the subcontract require access to SENSITIVE COMPARTMENTED INFORMATION?

FORMCHECKBOX

FORMCHECKBOX

11.

Will the subcontract require access to Special Access Program information?

FORMCHECKBOX

FORMCHECKBOX

12.

Will the subcontract require access to U.S. classified information outside of the U.S., Panama Canal Zone, Puerto Rico, U.S. Possessions, and Trust Territories?

FORMCHECKBOX

FORMCHECKBOX

13.

Will the subcontractor be authorized to request Defense Docu- mentation Center or Defense Information Analysis Center services?

FORMCHECKBOX

FORMCHECKBOX

14.

Will the subcontractor be involved in classified ADP processing at its facility?

FORMCHECKBOX

FORMCHECKBOX

EXPLANATION OF ACCESS REQUIREMENTS

The following is an explanation of the above access requirements:

Item 1:

Note the word "only." The subcontractor will not be required to have any safeguarding capability at the subcontractor's facility if this item is marked "Yes."

Item 2:

Note the word "only." The subcontractor will be required to have safeguarding capabilities.

Item 3:

The subcontractor will be required to have safeguarding capabilities.

Item 4:

If applicable, include as much information as possible to indicate if restricted or closed areas will be required.

Item 5:

Note the word "only." This type of subcontract would not require any specific classification guidance because the markings on the documents provided would be sufficient guidance for the subcontractor.

Item 6:

This means International Pact Organizations, such as North Atlantic Treaty Organization (NATO), Central Treaty Organization (CENTO), and Strategic Arms Reductions Talks (START). Permission of the Security Classification Officer is required before subcontracting.

Item 7:

This item includes access to FORMERLY RESTRICTED DATA and CRITICAL NUCLEAR WEAPONS DESIGN INFORMATION (CNWDI) and is information developed and controlled under the Atomic Energy Act of 1954. Note this item would always be marked "Yes" if access to CNWDI is required.

Item 8:

This requires coordination with the Security Classification Officer, and your should consult the Communications Security (COMSEC) Supplement to the Industrial Security Manual (ISM) for other requirements.

Item 9:

Coordination with the Security Classification Officer is required prior to contracting if Cryptographic Access Authorization is required.

Item 10:

If this information is involved, your facility will have a Special Security Officer who should be contacted before any contracting. Special security measures are required. Compliance with Defense Intelligence Agency Manual (DIAM) 50-5 and DIAM 50-3 is required.

Item 11:

These types of programs usually require additional security procedures or actions. These requirements are varied and may be different for each type of Special Access Program.

Item 12:

See Section XII, ISM, for special requirements if marked "Yes."

Item 14:

It does not apply if the subcontract is for a maintenance-type service when the subcontractor will be performing the work at a User Agency or another cleared facility. If this item is marked "Yes," the subcontractor will be required to prepare an Automatic Data Processing/Standard Practice Procedure(s) (ADP/SPP) for the subcontractor's ADP operations and the system will require approval of the cognizant security office in accordance with Section XIII, ISM.

JPL 2891-B7, 4/12