Toilet Specs.pdf

This document is installation instructions for American Standard Millennium Flushometer wall-mounted toilets (Models 3351.101, 3352.101, 3353.101, 3354.101, 2257.101, 2257.101.NAF, 2633.101, 2634.101). The fixtures meet American Disabilities Act Guidelines and ANSI A117.1 requirements for physically challenged users.

The instructions specify that two people are recommended for handling due to product fragility and risk of breakage or injury. Proper operation requires a minimum of 30 psi working line pressure. Installation involves mounting fixture studs 58mm (2-1/4") from the finished wall face, with four mounting holes at 22mm (7/8") diameter. Critical dimensional specifications include a 660mm (26") finished wall distance, 470mm (18-1/2") fixture projection, 356mm (14") distance to four mounting holes, and 7mm (5/16") waste horn projection from finished wall. The installation requires bearing nuts and washers set to allow 1/16" (2mm) clearance between fixture and wall, with adjustment of back-up nuts to position a minimum 1/16" gap between fixture and wall surface. A level must be used to ensure proper vertical alignment of back-up nuts. Installation of the bowl on support requires a helper and uses cap nuts and fiber washers with back-up nuts. The top right fiber washer and cap nut must not be applied until other cap nuts are firmly tightened with a wrench, then hand-tightened approximately 1/4 turn. Sealant must be applied to gaps between bowl and finished wall, with excess removed. The instructions include regional contact information for warranty support in the United States, Canada, and Mexico.