Tab 02. 6645015449475.pdf

ITEM PURCHASE DESCRIPTION

General Services Administration

Printed on: 2/13/2020, 1:10:20 PM

6645-01-544-9475 UI: EA

WATCH, WRIST

DESCRIPTION

ITEM NAME WATCH, WRIST

I.A.W. MARATHON WATCH CO. P/N WW194013 OR

EQUAL COMMERCIAL

MIL-PRF-46374

TYPE: III - ANALOG, LONG LIFE (5-10 YEARS),

MAINTAINABLE, ANTIMAGNETIC, WATER-RESISTANT,

HIGH ALTITUDE, CORROSION-RESISTANT, WITH

ELAPSED TIME RING

CLASS: 1 - ELECTRICAL MOVEMENT, BATTERY

INSTALLED

CASE DIAMETER 41.00 MM

CASE MATERIAL RESIN; FIBRESHELL

UNIT TYPE MILITARY NAVIGATOR WITH DATE

UNIT SHAPE ROUND

USAGE DESIGN FOR HIGH ALTITUDE, PILOT / PARACHUTE OR

LAW ENFORCEMENT

TIME RING TYPE BI-DIRECTIONAL TIME ZONE

MOVEMENT TYPE ETA F06 QUARTZ

DISPLAY TYPE ANALOG WITH 2 TIME SCALE AND STOP

SECOND HIGH TORQUE MOVEMENT

BACKGROUND FACE COLOR BLACK

BACK OF WATCH MATERIAL ENGRAVED STAINLESS STEEL

DIAL NUMERAL COLOR WHITE

DIAL WINDOW MATERIAL ACRYLIC

CRYSTAL MATERIAL HESALITE FOR EXCESSIVE EXTERNAL

PRESSURE CHANGES

HAND TYPE SWEEP SECOND HAND

HAND QUANTITY 3

HAND DESIGNATION SECOND HAND, MINUTE HAND AND HOUR

HAND

LUMINOUS HANDS INCLUDED

HAND AND HOUR ILLUMINATION SELF LIGHTING TRITIUM TUBES

(ISOTOPE H3);

(ACTIVITY BETWEEN 26 AND 30 MILLICURIES)

BEZEL MATERIAL FIBRESHELL

BAND COLOR BLACK

BAND MATERIAL NYLON MIL SPEC STRAP (EXTRA LONG TO FIT

OVER UNIFORM) I.A.W. MIL-S-46383B, TYPE: III

BAND LENGTH DESIGN MEN'S STANDARD - EXTRA LONG TO FIT OVER

UNIFORM I.A.W. MIL-S-46383B, TYPE: III

SCALE DIAL QUANTITY 2

SCALE DIAL RANGE 0.0 / 12.0 HOUR AND 13.0 / 24.0 HOUR

SCALE DIAL FEATURE SHOWS STANDARD TIME AND SUPPLEMENTAL

MILITARY TIME

BATTERY REPLACEMENT TYPE BATTERY #371

BATTERY REPLACEMENT FEATURE END OF LIFE INDICATOR (EOL); THE

SECOND

HAND ADVANCES IN 4 SECOND INCREMENTS

NON-MAGNETIC YES

MANUFACTURE REQUIREMENT MUST MEET U.S. NRC LICENSE

REQUIREMENTS (10 CFR 32.22)

WARRANTY 1 YEAR

SPECIAL FEATURE DUST PROOF

ENVIRONMENTAL PROTECTION HIGH IMPACT AND WATER RESISTANT UP TO 6

ATM (60 METERS / 200 FFET); CORROSION

RESISTANT; MOVEMENT IS ACCURATE TO

-0.3/+ 0.5 SECONDS PER DAY

BIDDING ON:

Manufacturer's Name: __________________________

Brand___________________________________

Model or Part No. __________________________________

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage.

The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD 129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL

BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.