Tab 02. 6645002504680.pdf

ITEM PURCHASE DESCRIPTION

General Services Administration

Printed on: 2/13/2020, 1:11:34 PM

6645-00-250-4680 UI: EA

STOPWATCH

DESCRIPTION

ITEM NAME STOPWATCH

DIAMETER SIZE 2.00 INCHES

OVERALL THICKNESS 0.50 INCHES

MINIMUM JEWEL QUANTITY 7

MAXIMUM BASIS WEIGHT 1 POUND

GRADUATION UNIT 1.00 MINUTE AND 0.200 (1/5) SECOND

TOTAL READER TIME 30 MINUTES

SCALE NAME MINUTE TOTALIZING AND SECONDS

SCALE QUANTITY 2

SCALE RANGE + 0.00 / + 30.00 MINUTE AND + 0.00/ + 60.00

SECOND

TOTALIZER DIAL RANGE + 0.00 / + 30.00 IN MINUTES

SWEEP HAND QUANTITY 1

MOVEMENT SIZE DESIGNATION 16

CASE MATERIAL ANY ACCEPTABLE

CASE SURFACE TREATMENT ANY ACCEPTABLE

JEWEL TYPE NATURAL OR SYNTHETIC SAPPHIRE, RUBY OR

GARNET

WATCH TYPE SINGLE ACTION

BEZEL TYPE ANY ACCEPTABLE

CRYSTAL TYPE ANY ACCEPTABLE

FACE TYPE OPEN POCKET

OVERALL BACKGROUND COLOR WHITE

OVERALL CRYSTAL COLOR CLEAR, UNCOLORED

INSCRIPTION COLOR ANY ACCEPTABLE

MAJOR GRADUATION COLOR ANY ACCEPTABLE

MINOR GRADUATION COLOR ANY ACCEPTABLE

DIAL BACKGROUND COLOR WHITE ENAMEL

DIAL NUMERAL COLOR BLACK

DIAL SCALE MARKING COLOR ANY ACCEPTABLE

DIAL SCALE MARKING LUMINOSITY NON-LUMINOUS

SEPARATE TOTALIZER DIAL INCLUDED

WINDING METHOD STEM

STEM OPERATION CONSECUTIVE CROWN DEPRESSIONS FOR STOP,

START AND

RETURN TO ZERO

MOVEMENT TYPE CONTINUOUS RUNNING

NON-MAGNETIC CHARACTERISTIC INCLUDED

ESCAPEMENT TYPE ANY ACCEPTABLE

SUBMERSIBILITY NON-SUBMERSIBLE

SHOCKPROOF FEATURE INCLUDED

WATER RESISTANT FEATURE INCLUDED

STRIKING MECHANISM NOT INCLUDED

CIVIL DATE INDICATOR NOT INCLUDED

LUMINOUS DIAL NOT INCLUDED

LUMINOUS HAND NOT INCLUDED

LUMINOUS NUMERAL NOT INCLUDED

SPECIAL FEATURE USED FOR LABORATORIES AND GEOLOGICAL SURVEYS

IN AREAS OF HIGH HUMIDITY AND DUST

ENVIRONMENTAL PROTECTION DUST, WATER, ANIT-MAGNETIC, SHOCK, CORROSION

AND

EROSION RESISTANT CAUSED BY ACIDS

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage.

The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD 129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL

BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.