T2760 17DPP00114 Bid Solicitation~1.docx

Bid Solicitation/Request for Proposal Bid #17DPP00114

Vendor’s {Bidder’s} Electronic Question Due Date (Refer to Bid Solicitation {RFP} Section 1.3.1 for more information.)

Mandatory/Optional Pre-Quote {Proposal} Conference (Refer to Bid Solicitation {RFP} Section 1.3.6 for more information.)

Mandatory/Optional Site Visit (Refer to Bid Solicitation {RFP} Section 1.3.5 for more information.)

Not Applicable

Not Applicable

Quote {Proposal} Submission Date (Refer to Bid Solicitation {RFP} Section 1.3.2 for more information.)

Dates are subject to change. All times contained in the Bid Solicitation {RFP} refer to Eastern Time. All changes will be reflected in Bid Amendments {Addenda} to the Bid Solicitation {RFP} posted on the Division of Purchase and Property website and on www.njstart.gov.

Small Business Set-Aside Status |X| Not Applicable

|_| Entire Blanket P.O. {Contract}

|_| Partial Blanket P.O. {Contract}

|_| Subcontracting Only Category

|_| I

|_| II

|_| III

Bid Solicitation {RFP} Issued By Using Agencies

Division of Purchase and Property Trenton, New Jersey 086250230

Date: March 13, 2017

Table of Contents

1.0 INFORMATION FOR VENDORS {BIDDERS}

NOTICE: This Bid Solicitation {Request for Proposal (RFP)} is part of the NJSTART Procurement Program. The Vendor {Bidder} is advised to thoroughly read all sections, as many have been revised, and follow all instructions contained in this Bid Solicitation {RFP}, including the instructions on the Bid Solicitation’s {RFP’s} Offer and Acceptance Page {Signatory Page} and read through all Quick Reference Guides (QRGs) located on the NJSTART Vendor Support Page (http://www.state.nj.us/treasury/purchase/njstart/vendor.shtml), in preparing and submitting its Quote {Proposal}.

Terminology is listed by new NJSTART term; {existing term} appears in braces.

1.1 PURPOSE AND INTENT

This Bid Solicitation {RFP} is issued by the Procurement Bureau, Division of Purchase and Property (Division), Department of the Treasury on behalf of the Department of the Treasury, Bureau of Transportation Services. The purpose of this Bid Solicitation {RFP} is to solicit Quotes {Proposals} for OEM Automotive Parts and Accessories for Light Duty Vehicles.

The intent of this Bid Solicitation {RFP} is to award Master Blanket Purchase Orders (Blanket P.O.s) {Contracts} to those responsible Vendors {Bidders} whose Quotes {Proposals}, conforming to this Bid Solicitation {RFP} are most advantageous to the State, price and other factors considered. The State may award any and all price lines. The State, however, reserves the right to separately procure individual requirements that are the subject of the Blanket P.O. {Contract} during the Blanket P.O. {Contract} term, when deemed by the Director of the Division of Purchase and Property (Director) to be in the State’s best interest.

There are twelve (12) price line items, representing twelve (12) brands of OEM automotive parts, which are itemized in Section 3.1 of the Bid Solicitation {RFP}. The State intends to make up to four (4) Blanket P.O. {Contract} awards per region for each brand, one primary, one secondary, one tertiary and one quaternary, for each price line item.

The State of NJ Standard Terms and Conditions (SSTC) accompanying this Bid Solicitation {RFP} will apply to all Blanket P.O.s {Contracts} made with the State of New Jersey. These terms are in addition to the terms and conditions set forth in this Bid Solicitation {RFP} and should be read in conjunction with them unless the Bid Solicitation {RFP} specifically indicates otherwise.

The State of New Jersey (State) intends to extend the Blanket P.O.s {Contracts} awarded to the Division's Cooperative Purchasing Program participants. These participants include quasi-State entities, counties, municipalities, school districts, volunteer fire departments, first aid squads, independent institutions of higher learning, County colleges and State colleges. In order for the State Blanket P.O. {Contract} to be extended to Cooperative Purchasing Program participants, the Vendor {Bidder} must agree to the extension by executing the Cooperative Purchase Form. Also refer to Section 4.4.6 of this Bid Solicitation {RFP}. Although the State, with the consent of the Vendor(s) {Bidder(s)}, is making the use of any Blanket P.O. {Contract} resulting from this Bid Solicitation {RFP} available to non-State Agencies, the State makes no representation as to the acceptability of any State Bid Solicitation {RFP} terms and conditions under the Local Public Contracts Law or any other enabling statute or regulation.

1.2 BACKGROUND

1.2.1 This is a reprocurement of the product/services provided under the T-2760 OEM Automotive Parts and Accessories for Light Duty Vehicles (Class 4 or Lower, 15,000 lb. GVWR or Less) term Blanket P.O. {Contract}, presently due to expire on June 25, 2017. Vendors {Bidders} interested in the current Blanket P.O. {Contract} specifications and pricing information may review the current Blanket P.O. {Contract} (T-2760) at http://www.state.nj.us/treasury/purchase/noa/contracts/t2760_11-x-21682.shtml and are cautioned that this new Bid Solicitation {RFP} addresses current requirements.

1.2.2 Parts covered under other term Blanket P.O.s {Contracts}, including the following, are excluded from this Bid Solicitation {RFP}:

1.2.3 The Bid Solicitation {RFP} is designed to meet the quantitative, expeditious and cost efficient local delivery, parts interchangeability, standardization and compatibility requirements of the lead State Agency and is to extend to over 2,800 cooperative purchasing members. The list of OEM brands in Section 3.1 represents the needs of the lead State Agency, based upon experience and expertise in Fleet Management. This Bid Solicitation {RFP} will provide multiple Blanket P.O.s {Contracts} for each OEM price line item of parts in each of the three regions - North, Central and South - to accommodate varying needs of the Blanket P.O. {Contract} users, thereby increasing the total Blanket P.O. {Contract} utilization and, in turn, providing better pricing for future Blanket P.O. {Contract} reprocurement. As stated in Section 3.4 of this Bid Solicitation {RFP} (Blanket P.O. {Contract} Implementation – Ordering Process), this Bid Solicitation {RFP} will only provide convenience Blanket P.O.s {Contracts} with the best pricing for each OEM price line item in each region, but is not intended to replace an extensive Blanket P.O. {Contract} selection process to be carried out by the Blanket P.O. {Contract} users for each purchase transaction prior to issuance of a purchase order.

1.2.4 Please carefully review and comply with the requirements set forth in Sections 4.4.3.2 (Manufacturer’s Price List) and 4.4.3.3 (Manufacturer’s Certification) of the Bid Solicitation {RFP}.

1.3 Key Events

1.3.1 ELECTRONIC QUESTION AND ANSWER PERIOD

The Division will electronically accept questions and inquiries from all potential Vendors {Bidders} via the “Q&A” Tab of the Bid Solicitation {RFP} in NJSTART.

A. Questions should be directly tied to the Bid Solicitation {RFP} and asked in consecutive order, from beginning to end, following the organization of the Bid Solicitation {RFP}; and

B. Each question should begin by referencing the Bid Solicitation {RFP} page number and section number to which it relates.

Vendors {Bidders} may refer to the QRG “Submit a Quote” for additional instruction. QRGs are located on the NJSTART Vendor Support Page.

A Vendor {Bidder} must not contact the Using Agency and/or the Procurement Specialist directly, in person, by telephone or by e-mail, concerning this Bid Solicitation {RFP}.

The cut-off date for electronic questions and inquiries relating to this Bid Solicitation {RFP} is indicated on the Bid Solicitation {RFP} cover sheet. In the event that questions are posed by Vendors {Bidders}, answers to such questions will be issued by Bid Amendment {Addendum}. Any Bid Amendment {Addendum} to this Bid Solicitation {RFP} will become part of this Bid Solicitation {RFP} and part of any Blanket P.O. {Contract} awarded as a result of this Bid Solicitation {RFP}. Bid Amendments {Addenda} to this Bid Solicitation {RFP}, if any, will be posted as a File Attachment on the “Summary” page of the Bid Solicitation {RFP} in NJSTART after the cut-off date. (See Bid Solicitation {RFP} Section 1.4.1 for further information.)

1.3.1.1 EXCEPTIONS TO THE STATE OF NJ STANDARD TERMS AND CONDITIONS (SSTC)

Questions regarding the SSTC and exceptions to mandatory requirements must be posed during this Electronic Question and Answer period and shall contain the Vendor’s {Bidder’s} suggested changes and the reason(s) for the suggested changes.

1.3.2 SUBMISSION OF QUOTES {PROPOSALS}

In order to be considered for award, the Quote {Proposal} must be received by the Procurement Bureau of the Division at the appropriate location by the required time. Vendors {Bidders} shall submit a Quote {Proposal} either electronically through NJSTART or via hard copy.

Hard copy Quote {Proposal} must be submitted to the physical location noted below:

PROPOSAL RECEIVING ROOM – 9TH FLOOR

DIVISION OF PURCHASE AND PROPERTY

DEPARTMENT OF THE TREASURY

33 WEST STATE STREET, P.O. BOX 230

TRENTON, NJ 08625-0230

Directions to the Division are available on the web at http://www.state.nj.us/treasury/purchase/directions.shtml.

QUOTES {PROPOSALS} NOT RECEIVED PRIOR TO THE QUOTE {PROPOSAL} OPENING DEADLINE SHALL BE REJECTED. THE DATE AND TIME OF THE QUOTE {PROPOSAL} OPENING ARE INDICATED ON THE BID SOLICITATION {RFP} COVER SHEET AND IN THE “SUMMARY” PAGE OF THE BID SOLICITATION {RFP} IN NJSTART.

Note: A Vendor {Bidder} using U.S. Postal Service regular or express mail services should allow additional time since the U.S. Postal Service does not deliver directly to the Proposal Receiving Room. A Vendor {Bidder} should make every effort to submit its Quote {Proposal} well ahead of the Quote {Proposal} submission deadline to mitigate unforeseen delays or issues. The Vendor {Bidder} is solely responsible for the timely submission of its Quote {Proposal} in response to this Bid Solicitation {RFP}.

Procedural inquiries concerning this Bid Solicitation {RFP} may be directed to njstart@treas.nj.gov and/or (609) 341-3500.

The State will not respond to substantive questions related to the Bid Solicitation {RFP} or any other Blanket P.O. {Contract} via this e-mail address or phone number. For inquiries related to substantive questions refer to Section 1.3.1 (Electronic Question and Answer Period).

1.3.3 NJSTART

The Division is pleased to announce its new eProcurement solution “ .”

Vendor {Bidder} Support:

Vendors {Bidders} are strongly encouraged to visit the NJSTART Vendor Support Page, which contains Quick Reference Guides (QRGs), supporting videos, a glossary of NJSTART terms, and helpdesk contact information.

The Vendor {Bidder} should utilize the QRGs before attempting to submit its Quote {Proposal} using the NJSTART process. It is the Vendor’s {Bidder’s} responsibility to ensure that the NJSTART Quote {Proposal} and attachments have been properly submitted.

1.3.4 ELECTRONIC SIGNATURES

Vendors {Bidders} submitting Quotes {Proposals} through NJSTART may sign the forms listed in Section 4.4.1 (Forms, Registrations and Certifications Required with Quote {Proposal}) and Section 4.4.2 (Forms, Registrations and Certifications Required Before Blanket P.O. {Contract} Award and That Should Be Submitted with the Quote {Proposal}) of this Bid Solicitation {RFP} electronically by typing the name of the authorized signatory in the “Signature” block as an alternative to downloading, physically signing the form, scanning the form, and uploading the form to NJSTART.

Vendors {Bidders} submitting Quotes {Proposals} in hard copy format, must provide forms with original, physical signatures, otherwise its Quote {Proposal} may be deemed non-responsive.

1.3.5 MANDATORY/OPTIONAL SITE VISIT

Not applicable to this procurement.

1.3.6 MANDATORY/OPTIONAL PRE-QUOTE {PROPOSAL} CONFERENCE

Not applicable to this procurement.

1.3.7 PRE-QUOTE {PROPOSAL} DOCUMENT REVIEW

Not applicable to this procurement.

1.4 ADDITIONAL Information

1.4.1 BID AMENDMENTS {ADDENDA}: Revisions to this BID SOLICITATION {RFP}

In the event that it becomes necessary to clarify or revise this Bid Solicitation {RFP}, such clarification or revision will be by Bid Amendment {Addendum}. Any Bid Amendment {Addendum} to this Bid Solicitation {RFP} will become part of this Bid Solicitation {RFP} and part of any Blanket P.O. {Contract} awarded as a result of this Bid Solicitation {RFP}.

There are no designated dates for release of Bid Amendments {Addenda}. Those Vendors {Bidders} who are on the bidholder list either through commodity code registration in NJSTART or by acknowledging the bid in NJSTART should receive notification of any Bid Amendment(s) {Addenda}. If a Vendor {Bidder} is not on the bidholder list to receive notifications related to a Bid Solicitation {RFP}, Bid Amendments {Addenda} are still viewable on the “Summary” page of the Bid Solicitation {RFP} in NJSTART.

BID AMENDMENTS {ADDENDA} WILL BE ISSUED AS FILE ATTACHMENTS, AND ARE VIEWABLE ON THE “SUMMARY” PAGE OF THE BID SOLICITATION {RFP} IN NJSTART. Vendors {Bidders} may refer to the QRG “Submit a Quote” for additional instruction. QRGs are located on the NJSTART Vendor Support Page.

It is the sole responsibility of the Vendor {Bidder} to be knowledgeable of all Bid Amendments {Addenda} related to this procurement. An interested Vendor {Bidder} should check the NJSTART “Open Bids” Tab on a daily basis to ensure review of the most updated information.

1.4.2 VENDOR {BIDDER} Responsibility

The Vendor {Bidder} assumes sole responsibility for the complete effort required in submitting a Quote {Proposal} in response to this Bid Solicitation {RFP}. No special consideration will be given after Quotes {Proposals} are opened because of a Vendor’s {Bidder’s} failure to be knowledgeable as to all of the requirements of this Bid Solicitation {RFP}.

1.4.3 COST Liability

The State assumes no responsibility and bears no liability for costs incurred by a Vendor {Bidder} in the preparation and submittal of a Quote {Proposal} in response to this Bid Solicitation {RFP}.

1.4.4 CONTENTS of QUOTE {Proposal}

Quotes {Proposals} can be released to the public pursuant to N.J.A.C. 17:12-1.2(b) and (c), or under the New Jersey Open Public Records Act (OPRA), N.J.S.A. 47:1A-1 et seq., or the common law right to know.

After the opening of sealed Quotes {Proposals}, including Quotes {Proposals} submitted through the NJSTART electronic process, all information submitted by a Vendor {Bidder} in response to a Bid Solicitation {RFP} is considered public information notwithstanding any disclaimers to the contrary submitted by a Vendor {Bidder}. Proprietary and confidential information may be exempted from public disclosure by OPRA and/or the common law. When the Bid Solicitation {RFP} contains a negotiation component, the Quote {Proposal} will not be subject to public disclosure until a notice of intent to award a Blanket P.O. {Contract} is announced.

As part of its Quote {Proposal}, a Vendor {Bidder} may designate any data or materials it asserts are exempt from public disclosure under OPRA and/or the common law, explaining the basis for such assertion. The location in the Quote {Proposal} of any such designation should be clearly stated in a cover letter. The State reserves the right to make the determination as to what is proprietary or confidential, and will advise the Vendor {Bidder} accordingly. Any proprietary and/or confidential information in a Quote {Proposal} will be redacted by the State. The State will not honor any attempt by a Vendor {Bidder} to designate its entire Quote {Proposal} and/or prices as proprietary, confidential and/or to claim copyright protection for its entire Quote {Proposal}. Copyright law does not prohibit access to a record which is otherwise available under OPRA. In the event of any challenge to the Vendor’s {Bidder’s} assertion of confidentiality with which the State does not concur, the Vendor {Bidder} shall be solely responsible for defending its designation, but in doing so, all costs and expenses associated therewith shall be the responsibility of the Vendor {Bidder}. The State assumes no such responsibility or liability.

A Vendor {Bidder} shall not designate any price lists and/or catalogs submitted as exempt from public disclosure as the same must be accessible to State Using Agencies and Cooperative Purchasing Program participants (if the Bid Solicitation {Contract} has been extended to these participants) and thus must be made public to allow all eligible purchasing entities access to the pricing information.

1.4.5 ANNOUNCEMENT OF QUOTE {PROPOSAL} INFORMATION

On the date and time Quotes {Proposals} are due under the Bid Solicitation {RFP}, all information concerning the Quotes {Proposals} submitted may be publicly announced and shall be available for inspection and copying except as noted below:

Vendors {Bidders} submitting Quotes {Proposals} will be announced, and the contents of the Quotes {Proposals} shall not be available for inspection and copying until the Notice of Intent to Award is issued by the Director.

1.4.6 PRICE Alteration In Hard copy QUOTES {Proposals}

Hard copy Quote {Proposal} prices must be typed or written in ink. Any price change (including "white-outs") must be initialed. Failure to initial price changes shall preclude a Blanket P.O. {Contract} award from being made to the Vendor {Bidder}.

1.4.7 Proposal ERRORS

In accordance with N.J.A.C. 17:12-2.11, “Proposal errors,” a Vendor {Bidder} may withdraw its Quote {Proposal} as described below.

1.4.7.1 QUOTE {PROPOSAL} WITHDRAWAL PRIOR TO QUOTE {PROPOSAL} OPENING

NJSTART: A Vendor {Bidder} may withdraw its Quote {Proposal} submission in NJSTART prior to the Quote {Proposal} opening; however, Vendors {Bidders} should note that while withdrawn NJSTART Quotes {Proposals} remain viewable by the Vendor {Bidder} on its Vendor Profile Homepage, they are removed from the Division’s view and cannot be considered for Blanket P.O. {Contract} award. The Vendor {Bidder} may submit a revised Quote {Proposal} as long as the Quote {Proposal} is received prior to the announced date and time for Quote {Proposal} submission. Vendors {Bidders} may refer to the QRG “Submit a Quote” for additional instruction. QRGs are located on the NJSTART Vendor Support Page.

Hard Copy: A Vendor {Bidder} may request that its hard copy Quote {Proposal} be withdrawn prior to the Quote {Proposal} opening. Such request must be made, in writing, to the Supervisor of the Proposal Review Unit at the address provided in Section 1.4.7.2 below. The Vendor {Bidder} may submit a revised Quote {Proposal} as long as the Quote {Proposal} is received prior to the announced date and time for Quote {Proposal} submission and at the place specified.

1.4.7.2 QUOTE {PROPOSAL} WITHDRAWAL AFTER QUOTE {PROPOSAL} OPENING, BUT PRIOR TO

BLANKET P.O. {CONTRACT} AWARD

NJSTART and Hard Copy: If, after the Quote {Proposal} opening, but before Blanket P.O. {Contract} award, a Vendor {Bidder} discovers an error in its Quote {Proposal}, the Vendor {Bidder} may make a written request to the Supervisor of the Proposal Review Unit to withdraw its Quote {Proposal}, or a portion thereof, from consideration for award. If the Vendor’s {Bidder’s} request to withdraw is made in good faith, and the State will not be significantly prejudiced by granting the withdrawal of the Quote {Proposal} beyond the loss of the benefit of the bargain to the State of the withdrawing Vendor’s {Bidder’s} offer, the request shall be granted. Evidence of the Vendor’s {Bidder’s} good faith in making this request can be demonstrated by one (1) or more of the following factors: A mistake is so significant that to enforce the Blanket P.O. {Contract} resulting from the Quote {Proposal} would be unconscionable; that the mistake relates to a material feature or term of the Blanket P.O. {Contract}; and that the mistake occurred notwithstanding the Vendor’s {Bidder’s} exercise of reasonable care. After Quote {Proposal} opening, while pursuant to the provisions of this section a Vendor {Bidder} may request to withdraw its Quote {Proposal} and the Director may in her discretion allow said Vendor {Bidder} to withdraw it, the Division also may take notice of repeated or unusual requests to withdraw by a Vendor {Bidder} and take those prior requests to withdraw into consideration when evaluating the Vendor’s {Bidder’s} future Quotes {Proposals}.

All Quote {Proposal} withdrawal requests must include the Bid Solicitation {RFP} identification number and the final Quote {Proposal} submission date and be sent to the following address:

Department of the Treasury Division of Purchase and Property PO Box 039 33 West State Street – 9th Floor Trenton, New Jersey 08625-0039 Attention: Supervisor, Proposal Review Unit

If during a Quote {Proposal} evaluation process, an obvious pricing error made by a potential Blanket P.O. {Contract} awardee is found, the Director or her designee shall issue written notice to the Vendor {Bidder}. The Vendor {Bidder} will have up to five (5) business days after receipt of the notice to confirm its pricing. If the Vendor {Bidder} fails to respond, its Quote {Proposal} shall be considered withdrawn, and no further consideration shall be given to it.

If it is discovered that there is an arithmetic disparity between the unit price and the total extended price, the unit price shall prevail. If there is any other ambiguity in the pricing, other than a disparity between the unit price and extended price and the Vendor’s {Bidder’s} intention is not readily discernible from other parts of the Quote {Proposal}, the Director may seek clarification from the Vendor {Bidder} to ascertain the true intent of the Quote {Proposal}. If the Vendor {Bidder} inadvertently completes the “Discount” field and the “Unit Cost” field, the Discounted Unit Cost will prevail.

1.4.8 JOINT Venture

If a Joint Venture is submitting a Quote {Proposal}, the agreement between the parties relating to such Joint Venture should be submitted with the Joint Venture’s Quote {Proposal}. Authorized signatories from each party comprising the Joint Venture must sign the Offer and Acceptance Page {Signatory Page}. Each party to the Joint Venture must individually comply with all the forms and certification requirements in Sections 4.4.1 and 4.4.2 of this Bid Solicitation {RFP}.

1.4.9 Reciprocity for Jurisdictional Vendor {Bidder} Preference

In accordance with N.J.S.A. 52:32-1.4 and N.J.A.C. 17:12-2.13, the State of New Jersey will invoke reciprocal action against an out-of-State Vendor {Bidder} whose state or locality maintains a preference practice for its in-state Vendors {Bidders}. The State of New Jersey will use the annual surveys compiled by the Council of State Governments, National Association of State Procurement Officials, or the National Institute of Governmental Purchasing or a State’s statutes and regulations to identify States having preference laws, regulations, or practices and to invoke reciprocal actions. The State of New Jersey may obtain additional information as it deems appropriate to supplement the stated survey information.

A Vendor {Bidder} may submit information related to preference practices enacted for a State or Local entity outside the State of New Jersey. This information may be submitted in writing as part of the Quote {Proposal} response, including name of the locality having the preference practice, as well as identification of the county and state, and should include a copy of the appropriate documentation, i.e., resolution, regulation, law, notice to Vendor {Bidder}, etc. It is the responsibility of the Vendor {Bidder} to provide documentation with the Quote {Proposal} or submit it to the Director within five (5) business days after the deadline for Quote {Proposal} submission. Written evidence for a specific procurement that is not provided to the Director within five (5) business days of the public Quote {Proposal} submission date may not be considered in the evaluation of that procurement, but may be retained and considered in the evaluation of subsequent procurements.

1.4.10 QUOTE {PROPOSAL} ACCEPTANCES AND REJECTIONS

N.J.A.C. 17:12-2.7(d), the Director’s right to waive minor irregularities or omissions in a Quote {Proposal} and N.J.A.C. 17:12-2.2 which defines causes for Quote {Proposal} rejection, apply to all Quotes {Proposals}. In addition, pursuant to N.J.S.A. 52:34-12, the Director retains the right to reject all Quotes {Proposals} if it is in the public interest.

1.5 PRICE List and/or catalog pricing

The Vendor’s {Bidder's} signature guarantees that prices set forth within the applicable manufacturer's preprinted price lists and/or catalogs will govern until the manufacturer issues a new revised price list. By signature, the Vendor {Bidder} also acknowledges that any reference to conditions or provisions affecting the Quote {Proposal} pricing as entered for the Bid Solicitation {RFP} price lines, including, but not limited to, minimum orders, order threshold charges, service charges, price escalation clauses, FOB shipping point limitations, and shipping charges, contained in the preprinted price lists, catalogs, and/or literature, is not a condition or provision of its Quote {Proposal} and will not be part of any Blanket P.O. {Contract} awarded as a result of this Bid Solicitation {RFP}.

2.0 DEFINITIONS

2.1 CROSSWALK

2.2 General Definitions

The following definitions will be part of any Blanket P.O. {Contract} awarded or order placed as a result of this Bid Solicitation {RFP}.

Definitions are listed by new NJSTART terminology; {existing terminology} appears in braces.

All-Inclusive Hourly Rate – An hourly rate comprised of all direct and indirect costs including, but not limited to: labor costs, overhead, fee or profit, clerical support, travel expenses, per diem, safety equipment, materials, supplies, managerial support and all documents, forms, and reproductions thereof. This rate also includes portal-to-portal expenses as well as per diem expenses such as food.

Best and Final Offer or BAFO – Pricing timely submitted by a Vendor {Bidder} upon invitation by the Bureau after Quote {Proposal} opening, with or without prior discussion or negotiation.

Bid or Bid Solicitation {RFP or Solicitation} – This series of documents, which establish the bidding and Blanket P.O. {Contract} requirements and solicits Quotes {Proposals} to meet the needs of the Using Agencies as identified herein, and includes the Bid Solicitation {RFP}, State of NJ Standard Terms and Conditions (SSTC), price schedule, attachments, and Bid Amendments {Addenda}.

Bid Amendment {Addendum} – Written clarification or revision to this Bid Solicitation {RFP} issued by the Division of Purchase and Property. Bid Amendments {Addenda}, if any, will be issued prior to Quote {Proposal} opening.

Business Day - Any weekday, excluding Saturdays, Sundays, State legal holidays, and State-mandated closings unless otherwise indicated.

Calendar Day – Any day, including Saturdays, Sundays, State legal holidays, and State-mandated closings unless otherwise indicated.

Change Order {Contract Amendment} – An alteration or modification of the terms of a Blanket P.O. {Contract} between the State and the Vendor(s) {Contractor(s)}. A Change Order {Contract Amendment} is not effective until it is signed and approved in writing by the Director or Deputy Director, Division of Purchase and Property.

Cooperative Purchasing Program – The Division’s intrastate program that provides procurement-related assistance to New Jersey local governmental entities and boards of education, State and county colleges and other public entities having statutory authority to utilize select State Blanket P.O.s {Contracts} issued by the Division, pursuant to the provisions of N.J.S.A. 52:25-16.1 et seq.

Days After Receipt of Order (ARO) - The number of calendar days ‘After Receipt of Order’ in which the Using Agency will receive the ordered materials and/or services.

Director – Director, Division of Purchase and Property, Department of the Treasury, who by statutory authority is the Chief Contracting Officer for the State of New Jersey.

Discount - Means the standard discount applied by the Vendor {Bidder} to all items.

Discounted Unit Cost – Means “Unit Cost” field multiplied by (100 percent minus the “Discount” field percentage).

Division – The Division of Purchase and Property.

Evaluation Committee – A committee established or Division staff member assigned by the Director to review and evaluate Quotes {Proposals} submitted in response to this Bid Solicitation {RFP} and recommend a Blanket P.O. {Contract} award to the Director.

Firm Fixed Price – A price that is all-inclusive of direct cost and indirect costs, including, but not limited to, direct labor costs, overhead, fee or profit, clerical support, equipment, materials, supplies, managerial (administrative) support, all documents, reports, forms, travel, reproduction and any other costs.

Freight - Means Freight on Board (FOB) Destination.

Joint Venture – A business undertaking by two or more entities to share risk and responsibility for a specific project.

Master Blanket Purchase Order (“Blanket P.O.”) {Contract} – The Blanket P.O. {Contract} consists of the State of NJ Standard Terms and Conditions (SSTC), the Bid Solicitation {RFP}, the responsive Quote {Proposal} submitted by a responsible Vendor {Bidder} as accepted by the State, the notice of award, any Best and Final Offer, any subsequent written document memorializing the agreement, any modifications to any of these documents approved by the State and any attachments, Bid Amendment {Addenda} or other supporting documents, or post-award documents including Change Orders {Contract Amendments} agreed to by the State and the Vendor {Contractor}, in writing.

May – Denotes that which is permissible or recommended, not mandatory.

No Bid – The Vendor {Bidder} is not submitting a price Quote {Proposal} for an item on a price line.

No Charge – The Vendor {Bidder} will supply an item on a price line free of charge.

Ownership Disclosure Form – Refers to the Statement of Bidder/Vendor Ownership as utilized in NJSTART.

Primary Form – An electronic form contained within a Vendor’s {Bidder’s} NJSTART profile designated by the Vendor {Bidder} as the primary or principal version of the required form.

Procurement Bureau - The Division unit responsible for the preparation, advertisement, and issuance of Bid Solicitations {RFPs}, for the tabulation of Quotes {Proposals} and for recommending award(s) of Blanket P.O.(s) {Contract(s)} to the Director and the Deputy Director.

Project – The undertakings or services that are the subject of this Bid Solicitation {RFP}.

QRGs – Quick Reference Guides.

Quote {Proposal} – Vendor’s {Bidder’s} timely response to the Bid Solicitation {RFP} including, but not limited to, technical Quote {Proposal}, price Quote {Proposal}, and any licenses, forms, certifications, or other documentation required by the Bid Solicitation {RFP}.

Retainage - The amount withheld from the Vendor {Contractor} payment that is retained and subsequently released upon satisfactory completion of performance milestones by the Vendor {Contractor}.

Revision – A response to a BAFO request or a requested clarification of the Vendors {Bidders} Quote {Proposal}.

Shall or Must – Denotes that which is a mandatory requirement. Failure to meet a mandatory material requirement will result in the rejection of a Quote {Proposal} as non-responsive.

Should – Denotes that which is permissible or recommended, not mandatory.

Small Business – Pursuant to N.J.A.C. 17:13-1.2, “small business” means a business that meets the requirements and definitions of “small business” and has applied for and been approved by the New Jersey Division of Revenue and Enterprise Services, Small Business Registration and M/WBE Certification Services Unit as (i) independently owned and operated, (ii) incorporated or registered in and has its principal place of business in the State of New Jersey; (iii) has 100 or fewer full-time employees; and has gross revenues falling in one (1) of the three (3) following categories: (A) 0 to $500,000 (Category I); (B) $500,001 to $5,000,000 (Category II); and (C) $5,000,001 to $12,000,000, or the applicable federal revenue standards established at 13 CFR 121.201, whichever is higher (Category III).

State – State of New Jersey.

State Contract Manager or SCM – The individual, as set forth in Section 8.0, responsible for the approval of all deliverables, i.e., tasks, sub-tasks or other work elements in the Scope of Work. The SCM cannot direct or approve a Change Order {Contract Amendment}.

Subtasks – Detailed activities that comprise the actual performance of a task.

Subcontractor – An entity having an arrangement with a Vendor {Contractor}, whereby the Vendor {Contractor} uses the products and/or services of that entity to fulfill some of its obligations under its State Blanket P.O. {Contract}, while retaining full responsibility for the performance of all [the Vendor’s {Contractor's}] obligations under the Blanket P.O. {Contract}, including payment to the Subcontractor. The Subcontractor has no legal relationship with the State, only with the Vendor {Contractor}.

Task – A discrete unit of work to be performed.

Unit Cost – All-inclusive, firm fixed price charged by the Vendor {Bidder} for a single unit identified on a price line.

Using Agency[ies] – A State department or agency, a quasi-State governmental entity, or a Cooperative Purchasing Program participant, authorized to purchase products and/or services under a Blanket P.O. {Contract} procured by the Division. This Blanket P.O. {Contract} may be used by the Using Agencies or quasi-governmental entities specifically identified in the Bid Solicitation {RFP}. In addition, with the approval of the Director of the Division of Purchase and Property and the agreement of the Vendor {Contractor}, the Blanket P.O. {Contract} may be used by any Using Agency or quasi-governmental agency.

Vendor {Bidder} – An entity offering a Quote {Proposal} in response to the Division’s Bid Solicitation {RFP}.

Vendor {Contractor} – The Vendor {Bidder} awarded a Blanket P.O. {Contract} resulting from this Bid Solicitation {RFP}.

2.3 BLANKET P.O. {contract}-specific definitions/ACRONYMS

Aftermarket Component - Any component - utility body, snow plow, crane, liftgate or the like - installed on the vehicle chassis (prime unit) by manufacturer or installer (aftermarket installer) other than the chassis manufacturer (prime unit manufacturer).

ASTM - American Society for Testing Materials (http://www.astm.org/).

Dry Weight - Curb weight or tare weight of a vehicle - weight of an empty vehicle, without any payload, driver and passenger, with fluids filled to half capacity.

FMVSS - Federal Motor Vehicle Safety Standards, as established by National Highway Traffic Safety Administration (http://www.nhtsa.gov/cars/rules/import/FMVSS/).

GVWR - Gross Vehicle Weight Rating; the maximum legal weight carrying capacity of a vehicle, including its own weight, as published by the vehicle/chassis manufacturer. This Bid Solicitation {RFP} covers OEM parts and accessories for light duty vehicles – vehicles with 15,000 lb. GVWR or less (Class 4 or lower).

Materials in Solid Waste - Material found in the various components of the solid waste stream. General, solid waste has several components, such as municipal solid waste (MSW), construction and demolition debris (C&D), and nonhazardous industrial waste. Under RCRA Section 6002, EPA considers materials recovered from any component of the solid waste stream when designating items containing recovered materials.

NJMVC or NJDMV - New Jersey Motor Vehicle Commission, formerly known as Division of Motor Vehicles (http://www.state.nj.us/mvc/).

Non-State Agency - Any Using Agency other than the State agencies. Any quasi-State entity (New Jersey Turnpike, for example) or political sub-division is a non-State Agency. Quasi-State Entities include any agency, commission, board, authority or other such governmental entity which is established and is allocated to a State department or any bi-State governmental entity of which the State of New Jersey is a member.

OEM (Original Equipment Manufacturer) Parts - OEM parts are new or OEM remanufactured parts, which are designed, manufactured and/or approved by the vehicle manufacturer listed in Section 3.1 and supplied by its dealer/distribution network for use in its vehicle. Ford OEM parts, for example, are the parts designed, manufactured and/or approved by Ford Motor Co. and supplied by its dealer/ distribution network for use in its vehicles.

Ordering Agency - Any Using Agency, also referred to herein as a Blanket P.O. {Contract} user, placing a purchase order based upon the Blanket P.O. {Contract} resulting from this Bid Solicitation {RFP}.

Pre-Consumer Material - materials generated in manufacturing and converting processes, such as manufacturing scrap and trimmings/cuttings.

Post-Consumer Material - material or finished product that has served its intended use and has been diverted or recovered from waste destined for disposal, having completed its life as a consumer item. Post-consumer materials are part of the broader category of recovered materials.

Recovered Material - Waste material and byproduct that have been recovered or diverted from solid waste, but does not include materials and byproducts generated from, and commonly reused within, an original manufacturing process.

Recycling - The series of activities, including collection, separation, and processing, by which products or other materials are recovered from the solid waste stream for use in the form of raw materials in the manufacture of new products other than fuel for producing heat or power by combustion.

Recyclability - The ability of a product or material to be recovered from, or otherwise diverted from, the solid waste stream for the purpose of recycling.

RMAN - Recovered Materials Advisory Notices provide purchasing guidance and recommendations for recovered and post-consumer material content levels for designated items.

SAE - Society of Automotive Engineers (http://www.sae.org/).

USEPA - United States Environmental Protection Agency.

3.0 SCOPE OF WORK

3.1 OEM BRANDS OF LIGHT DUTY VEHICLE PARTS AND ACCESSORIES

3.1.1 This Bid Solicitation {RFP} covers the aforementioned twelve (12) OEM brands of light duty vehicle parts and accessories for each of the three (3) regions - North, Central and South. The parts specified herein must be provided by an OEM authorized dealer; non-OEM parts or aftermarket parts are not a part of this Bid Solicitation {RFP}.

3.1.2 Each of the twelve (12) brands of light duty vehicle parts and accessories constitutes one price line item.

3.2 REGIONAL JURISDICTION

3.2.1 Each of the three (3) regions - North, Central and South - is defined as follows. Vendors {Bidders} shall bid for one or more of the following region(s): North, Central and/or South. Vendors {Bidders} must service all counties within the region bid.

3.2.2 If the OEM manufacturer’s list of areas covered under each region does not agree with the list in Section 3.2.1 of the Bid Solicitation {RFP}, the Vendor {Bidder} shall provide the manufacturer's list of areas covered under each region on a separate sheet. If requested, the Vendor {Bidder} shall provide manufacturer's certification listing all areas covered under each region. If deemed in the best interest of the State, the manufacturer's list of areas covered under each region may be adopted, for the brand bid, superseding the list of areas specified in Section 3.2.1 of the Bid Solicitation {RFP}.

3.3 WARRANTY, DELIVERY AND PAYMENT

3.3.1 Warranty:

All parts furnished must be new or OEM remanufactured and in the manufacturer’s original standard package. Parts provided shall be guaranteed against faulty material and workmanship in accordance with the manufacturer’s standard warranty. Any faulty part must be replaced by the Vendor {Contractor} at no cost.

3.3.2 Delivery:

Vendor {Contractor} deliveries for all items shall be made within the delivery timeframes noted on the price sheet and in strict accordance with the instructions from the Using Agency. Prices for items in Quotes {Proposals} shall be submitted Freight On Board (F.O.B.) Destination. This Section supersedes Section 4.4.5.4 of the Bid Solicitation {RFP} unless the Delivery Days ARO fields on the price sheet are left blank. Please refer to Section 4.4.5.2, Step 4.

The Vendor {Contractor} will be required to deliver parts to Using Agencies on an as-needed basis. The Vendor {Contractor} shall make arrangements for delivery of parts upon receipt of a purchase order. All parts must be delivered in accordance with the Vendor’s {Contractor’s} delivery schedule.

All deliveries of parts will be made in accordance with the following schedule:

8:00 am to 12:00 noon and 1:00 pm to 3:00 pm, Monday thru Friday. The delivery location will be specified in the purchase order. Using Agencies may specify alternate delivery sites and /or hours, when necessary.

All deliveries must be made as instructed by the Using Agency, during working hours, except on legal holidays.

Deliveries shall not be made on the following State observed holidays:

· New Year’s Day;

· Martin Luther King Jr. Day;

· Presidents Day;

· Good Friday;

· Memorial Day;

· Independence Day;

· Labor Day;

· Columbus Day;

· Election Day;

· Veterans Day;

· Thanksgiving Day; and

· Christmas Day.

No parts will be accepted at the final delivery point without all supporting documentation and paperwork completed and delivered with the parts, which include the copy of the purchase order, payment voucher (if required by the Blanket P.O. {Contract} user), invoice and warranty documentation. No parts will be considered accepted until they have undergone final inspection at the delivery point.

3.3.3 Payment:

Invoices will be processed for payment only after final acceptance of the parts by the Using Agency and the delivery ticket has been signed off by an authorized representative of the Ordering Agency. Partial payments may be made for parts accepted, if billed separately. Timely payment discounts will be taken if offered by the Vendor {Contractor}. Please refer to Section 4.4.5.6 of the Bid Solicitation {RFP}. The State reserves the right to make payments directly or through a third party.

3.4 BLANKET P.O. {CONTRACT} IMPLEMENTATION (ORDERING PROCESS)

3.4.1 Blanket P.O. {Contract} users shall make purchases from that Vendor {Contractor} whose Blanket P.O. {Contract} terms and conditions are most advantageous, price and other factors considered. To ensure compliance, Blanket P.O. {Contract} users shall carry out a Blanket P.O.