Suggested_Products.pdf

Product File

INSTALL NEW INTRUSION & FIRE

ALARM SYSTEM

James Garfield National Historic Site

Mentor, Ohio

Design Development

PMIS No. 319395

1 December, 2023

AXIS M3014 Network Camera Ultra-discreet, recessed-mount video surveillance solution

AXIS M3014 Network Camera, with its innovative and unique design, is specifically developed for recessed mounting in drop ceilings, offering unmatched, discreet video surveillance solution that is ideal for retail stores, banks and other office buildings.

With its ultra-discreet fixed dome design, AXIS M3014 measures only 9 cm (3.6 in) wide and protrudes only 3 cm (1.2 in) from the ceiling. To suit interior design the cover ring is available in a range of colors.

The camera is innovatively designed for quick and easy installation in drop ceilings. Power over Ethernet (IEEE 802.3af) supplies power to the camera via the network, eliminating the need for power cables and reducing installation costs.

The camera uses progressive scan, providing full resolu-tion images of moving objects without distortion, at 30 frames per second. AXIS M3014 delivers HDTV 720p or 1 megapixel video, perfect for critical areas such as entrances or checkouts that need to be monitored in greater detail.

Multiple H.264 streams, as well as Motion JPEG streams, can be provided simultaneously either in full frame rate or individually optimized for different quality needs and bandwidth constraints.

DATASHEET

> Ultra-discreet fixed dome design

> HDTV quality

> Multiple H.264 streams

> Easy installation

> Power over Ethernet

Technical Specifications - AXIS M3014 Network Camera

Camera Image sensor 1/4” Progressive scan RGB CMOS 1 megapixel

Lens 2.8 mm, F2.0, fixed iris Horizontal angle of view: 80°

Light sensitivity 1–100000 lux, F2.0

Shutter time 1/25000 s to 1/6 s

Video Video compression

H.264 (MPEG-4 Part 10/AVC), Motion JPEG

Resolutions 1280x800 to 160x90

Frame rate 25 fps with power line frequency 50 Hz 30 fps with power line frequency 60 Hz

Video streaming Multiple, individually configurable streams in H.264 and Motion JPEG Controllable frame rate and bandwidth, VBR/CBR H.264

Pan/Tilt/Zoom Digital PTZ, Preset positions, Guard tour

Image settings Compression, Color, Brightness, Sharpness, Contrast, White balance, Exposure control, Exposure zones, Backlight compensation, Fine tuning of behavior at low light, Rotation, Text and image overlay, Privacy mask, Mirroring of images

Network Security Password protection, IP address filtering, HTTPSa encryption, IEEE 802.1Xa network access control, Digest authentication, User access log

Supported protocols

IPv4/v6, HTTP, HTTPSa, SSL/TLSa, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP™, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS

System integration Application Programming Interface

Open API for software integration, including VAPIX® and AXIS Camera Application Platform; specifications at www.axis.com AXIS Video Hosting System (AVHS) with One-Click Camera Connection.

ONVIF; specification at www.onvif.org

Intelligent video Video motion detection, Active tampering alarm Support for AXIS Camera Application Platform enabling installation of additional applications

Event triggers Intelligent video

Event actions File upload: FTP, HTTP and email Notification: email, HTTP and TCP Pre- and post-alarm video buffering Video recording to edge storage

Built-in installation aids

Pixel counter

General Casing Metal camera module holder, Plastic camera module casing, Plastic transparent cover and white cover ring

Memory 128 MB RAM, 128 MB Flash

Power Power over Ethernet IEEE 802.3af/802.3at Type 1 Class 1

Connectors RJ45 10BASE-T/100BASE-TX PoE

Edge storage Support for recording to network share (network-attached storage or file server)

Operating conditions

0 °C to 45 °C (32 °F to 113 °F) Humidity 20–80% RH (non-condensing)

Approvals EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22 Class B, KCC KN22 Class B, KN24, EN/UL 60950-1, MIC Class B

Weight 260 g (0.6 lb)

Included accessories

Installation Guide, Installation and Management Software CD, Windows decoder 1-user license

Video management software

AXIS Camera Companion (included), AXIS Camera Station and video management software from Axis’ Application Development Partners (not included). For more information, see www.axis.com/products/video/software

Warranty Axis 1–year warranty and AXIS Extended Warranty option, see www.axis.com/warranty

a. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/), and cryptographic software written by Eric Young (eay@cryptsoft.com).

More information is available at www.axis.com

Dimensions Optional accessories Different color options for cover rings www.axis.com

©2014 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right to introduce modifications without notice.

7/

EN

/M 1.

3/

AXIS M3026-VE Network Camera Outdoor-ready, day/night fixed dome with HDTV 1080p

AXIS M3026-VE is a light-sensitive fixed dome providing detailed wide-angle views. It has day and night functionality, maintaining high image quality even in low-light conditions. It supports multi-view streaming, enabling different areas of a scene to be cropped from the full view and streamed simultaneously for viewing or recording. It also has support for Axis’ Corridor Format for vertically oriented video streams, and for AXIS Camera Application Platform enabling the installation of intelligent video applications such as people counting. The vandal-resistant, outdoor-ready camera has IP66 and NEMA 4X ratings for protection against dust, rain and snow.

> Compact, vandal-resistant, outdoor-ready design

> HDTV 1080p/3 MP

> Day/night

> Multi-view streaming

> Power over Ethernet

Datasheet

AXIS M3026-VE Network Camera

Image sensor 1/3.6” (effective) progressive scan RGB CMOS

Lens M12 mount, Fixed iris, IR corrected

2.0 mm, F2.0 Horizontal field of view: 106° Vertical field of view: 78°

Day and night Automatically removable infrared-cut filter

Light sensitivity/ minimum illumination

Color: 0.3-200000 lux, F2.0, B/W: 0.06 lux, F2.0

Shutter time 1/30500 s to 2 s

Camera angle adjustment

Pan ±175°, Tilt 70°, Rotation ±180°

Video Video compression

H.264 (MPEG-4 Part 10/AVC) Baseline and Main Profile Motion JPEG

Resolutions 2048x1536 (3 MP) to 160x120

Frame rate 2 MP (1600x1200) and HDTV 1080p (1920x1080) capture modes:

25/30 fps with power line frequency 50/60 Hz 3 MP capture mode:

16/20 fps with power line frequency 50/60 Hz

Video streaming Multiple, individually configurable streams in H.264 and Motion JPEG Controllable frame rate and bandwidth

VBR/MBR H.264

Multi-view streaming

Up to 8 individually cropped out view areas. When streaming 4 view areas and 1 overview in VGA resolution, the frame rate is 16/20 fps per stream with power line frequency 50/60 Hz (3 MP capture mode)

Pan/Tilt/Zoom Digital PTZ, Preset positions, Guard tour

Image settings Compression, color, brightness, sharpness, contrast, white balance, exposure control, backlight compensation, Wide Dynamic Range – dynamic contrast, text and image overlay, mirroring of images, privacy mask Rotation: 0°, 90°, 180°, 270°, including Corridor Format Exposure zones, fine tuning of low light behavior

Network Security Password protection, IP address filtering, HTTPSa encryption, IEEE 802.1Xa network access control, Digest authentication, User access log, Centralized Certificate Management

Supported protocols

IPv4/v6, HTTP, HTTPSa, SSL/TLSa, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SFTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH

System integration Application Programming Interface

Open API for software integration, including VAPIX® and AXIS Camera Application Platform; specifications at www.axis.com AXIS Video Hosting System (AVHS) with One-Click Connection ONVIF® Profiles S and G, specifications at www.onvif.org

Analytics AXIS Video Motion Detection 3, Active tampering alarm Support for AXIS Camera Application Platform enabling installation AXIS Cross Line Detection, AXIS Digital Autotracking and third-party applications, see www.axis.com/acap

Event triggers Analytics, Edge storage events, External input

Event actions File upload: FTP, SFTP, HTTP, HTTPS, network share and email Notification: email, HTTPS and TCP External output activation

Video recording to edge storage Pre- and post-alarm video buffering Go to PTZ preset, Guard tour

Data streaming Event data

Built-in installation aids

Pixel counter

General Casing IP66- and NEMA 4X-rated, IK10 impact-resistant aluminum casing with transparent, polycarbonate cover and dehumidifying membrane, Encapsulated electronics, Captive screws (resitorx 10) Color: White NCS S 1002-B For repainting instructions of skin cover or casing and impact on warranty, contact your Axis partner.

Memory 512 MB RAM, 128 MB Flash

Power Power over Ethernet IEEE 802.3af/802.3a Type 1 Class 2 max 4.5 W

Connectors Male RJ45 10BASE-T/100BASE-TX PoE on a 2 m (6.6 ft) network cable, warranty can be maintained even when cable is cut-for more information, contact your Axis partner Terminal block for 1 alarm input and 1 output

Storage Support for microSD/microSDHC/microSDXC card Support for recording to dedicated network-attached storage (NAS) For SD card and NAS recommendations see www.axis.com

Operating conditions

-30 °C to 50 °C (-22 °F to 122 °F) Humidity 10–100% RH (condensing)

Approvals EMC EN 55022 Class B, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, RCM AS/NZS CISPR 22 Class B, KCC KN22 Class B, KN24 Safety

IEC/EN/UL 60950-22

Environment EN 50581, IEC 60529 IP66, NEMA 250 Type 4X, IEC 62262 IK10

Dimensions Ø 132 x 93 mm (Ø 5 3/16 x 3 11/16 in)

Weight 740 g (1.6 lb)

Included accessories

Installation Guide, Windows decoder 1-user license, Drill hole template, Resitorx L-key, Terminal block connector

Optional accessories

AXIS T91 Mount Accessories, AXIS T94F01D Pendant Kit, AXIS T94F01L Recessed Mount Kit, AXIS T94F01M J-Box/Gang Box Plate, AXIS T94F01P Conduit Back Box, AXIS T94F01S Mount Bracket, AXIS T94F02D Pendant Kit with sunshield, Network Cable Coupler IP66, Network Cable Coupler Indoor, Network Cable Coupler Indoor Slim, Skin covers (White/Black)

Video management software

AXIS Companion, AXIS Camera Station and video management software from Axis’ Application Development Partners (not included). For more information, see www.axis.com/products/video/software

Languages English, German, French, Spanish, Italian, Russian, Simplified Chinese, Japanese, Korean, Portuguese, Traditional Chinese

Warranty Axis 3-year warranty and AXIS Extended Warranty option, see www.axis.com/warranty

a. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/), and cryptographic software written by Eric Young (eay@cryptsoft.com).

Environmental responsibility:

www.axis.com/environmental-responsibility www.axis.com

©2014 - 2016 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right to introduce modifications without notice.

9/

EN

/M 2.

3/

AXIS P1357-E Network Camera Outdoor-ready, fixed camera with 5-megapixel or HDTV 1080p

AXIS P1357-E delivers multiple H.264 and Motion JPEG video streams in 5-megapixel resolution or full frame rate HDTV 1080p resolution. Wide dynamic range and day and night functionality provide superb image quality in daylight and dark conditions. P-Iris control gives optimal depth of field and image sharpness. The camera supports Power over Ethernet (PoE) and High PoE in temperatures from -40 ºC to 50 ºC (-40 ºF to 122 ºF). It offers digital pan/tilt/zoom, multi-view streaming and a serial port for communication with auxiliary equipment. The remote back focus function enables fine-tuning of the focus from a computer.

> HDTV 1080p/5 MP quality

> Outdoor-ready, IP66 rating

> P-Iris control

> Digital PTZ

> Multi-view streaming

Datasheet

AXIS P1357-E Network Camera

Image sensor Progressive scan RGB CMOS 1/3.2”

Lens IR-corrected, CS-mount lens P-Iris Varifocal 2.8-8 mm: 80°-32° viewa, F1.2

Day and night Automatically removable infrared-cut filter

Minimum illumination

Color: 0.2 lux, F1.2, B/W: 0.04 lux, F1.2

Shutter time Power line frequency 50/60 Hz: 1/24000 s to 2 s

Video Video compression

H.264 (MPEG-4 Part 10/AVC), H.264 Baseline and Main Profile, Motion JPEG

Resolutions 2592x1944 (5 MP) to 160x90

Frame rate Capture mode 2 MP/1080p@25/30 fps (50/60 Hz) Capture mode 3 MP@16/20 fps (50/60 Hz) Capture mode 5 MP@12.5/12 fps (50/60 Hz)

Video streaming Multiple, individually configurable streams in H.264 and Motion JPEG, Controllable frame rate and bandwidth, VBR/CBR H.264

Multi-view streaming

Up to 8 individually cropped out view areas When streaming 4 view areas and 1 overview in VGA resolution, the frame rate is 12 fps per stream (5 MP capture mode) or 20 fps per stream (3 MP capture mode)

Image settings Compression, Color, Brightness, Sharpness, Contrast, White balance, Exposure control, Exposure zones, Backlight compensation, Fine tuning of behavior at low light, WDR

- dynamic contrast, Text and image overlay, Privacy mask, Mirroring of images

Audio Audio streaming Two-way, full duplex

Audio compression

AAC LC 8/16 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz, Configurable bit rate

Audio input/output

External microphone input or line input, line output

Network Security Password protection, IP address filtering, HTTPSb encryption, IEEE 802.1Xb network access control, Digest authentication, User access log

Supported protocols

IPv4/v6, HTTP, HTTPSb, SSL/TLSb, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP™, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS

System integration Application Programming Interface

Open API for software integration, including VAPIX® and AXIS Camera Application Platform, specifications at www.axis.com AXIS Video Hosting System (AVHS) with One-Click Connection ONVIF Profile S, specification at www.onvif.org

Analytics Video motion detection, Active tampering alarm, Audio detection Support for AXIS Camera Application Platform enabling installation of AXIS Video Motion Detection 3, AXIS Cross Line Detection, AXIS Digital Autotracking and third-party applications, see www.axis.com/acap

Event triggers Intelligent video, Edge storage events, External input, Audio level, Time scheduled

Event actions File upload: FTP, HTTP, Network share and email Notification: email, HTTP and TCP Video and audio recording to edge storage, Pre- and post-alarm video buffering, PTZ preset, Guard tour, External output activation, Play audio clip, Day/Night switching, Status LED activation

Data streaming Event data

Built-in installation aids

Focus assistant, Pixel counter, Remote back focus

General Casing Color: White NCS S 1002-B

IP66- and NEMA 4X-rated, IK10 impact resistant aluminum enclosure

Memory 512 MB RAM, 128 MB Flash

Power Power over Ethernet (PoE) IEEE 802.3af max. 12.95 W or High PoE max. 25.5 W

Connectors RJ45 10BASE-T/100BASE-TX PoE I/O: 4-pin 2.5 mm terminal block, for 1 alarm input and 1 output RS485/RS422, 2 pcs, 2 pos, full duplex, terminal block DC input, terminal block, 3.5 mm mic/line in, 3.5 mm line out P-Iris connector (compatible with DC-iris)

Edge storage Support for microSD/microSDHC card Support for recording to dedicated network-attached storage

(NAS)

For SD card and NAS recommendations see www.axis.com

Operating conditions

-30 °C to 50 °C (-22 °F to 122 °F) with PoE, down to -40 °C (-40 °F) with High PoE Humidity 10-100% RH (condensing)

Approvals EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22 Class B, KCC KN22 Class B, KN24, IEC/EN/UL 60950-1, IEC/EN/UL 60950-22

EN 50121-4/IEC 62236, IEC/EN/UL 60950-22, IEC/EN 60529 IP66,

NEMA 250 Type 4X, IEC 60068-2-6, IEC 60068-2-27, IEC/EN 62262 IK10

Dimensions 404 x 161 x 142 (15 15/16 x 6 5/16 x 5 9/16 in)

Weight 3.1 kg (6.8 lb)

Included accessories

Connector kit, Installation Guide, Windows decoder 1-user license AXIS T94Q01A Wall Mount, Sunshield

Optional accessories

Axis mounts, Axis lenses, Axis midspans

Warranty Axis 3-year warranty and AXIS Extended Warranty option, see www.axis.com/warranty

a. Horizontal Angle of View

b. This product includes software developed by the OpenSSL Project for use in the

OpenSSL Toolkit (http://www.openssl.org/), and cryptographic software written by Eric Young (eay@cryptsoft.com).

More information is available at www.axis.com www.axis.com

©2014 - 2015 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right to introduce modifications without notice.

6/

EN

/M

1.

2/

Rack-mounted solution with high-grade hardware provides reliable, high-end performance

Interactive monitoring for prompt response

Interactive and multi-layered maps give a graphical overview of the surveillance installation

Alarm Manager is integrated with the map function for a consolidated overview of security and system alarms

Advanced video search tools quickly locate recordings for use as high-quality evidence

Multi-channel, two-way audio for message broadcasts or direct communications

Easy to deploy with proven performance

Automatic camera discovery detects and configures cameras

Configuration wizards make installation easy with just a few clicks

Smoother performance and up to 75 percent reduced CPU load with hardware accelerated decoding

Optional RAID 5 or 10 storage

Hybrid option with integrated encoder for existing analog cameras

Based on testing, the hardware is optimized to work with the VMS

Reliable solution that works with any camera

Preloaded with an NVR-optimized version of XProtect Professional

Choose from more than 6,000 cameras from more than 100 manufacturers

Industry’s best mobile app for free

Connect multiple Milestone Husky NVRs together in master/slave setup

Supports third-party integrations and Milestone add-on products

Includes 3-year hardware warranty

Product highlights

Top-level performance for the mid-market

Copyright Milestone Systems 2017

All rights reserved www.milestonesys.com

Form factor Rack-mounted, 2U

Type of deployment Single or multi-unit setup

Dimensions 43(W) x 40(D) x 8.8(H) cm

16.9(W) x 16.4(D) x 3.5(H) in

Maximum number of cameras 128 / With RAID: 80

Maximum recording rate 544 Mbit/s

Maximum local display 300 fps @ 720p

Camera licenses included 8

Add-on camera licenses 4 pack

Maximum number of users Unlimited

Dual network interface cards Yes

CPU i7-3610QE 2.3Ghz

Passmark 6193

Operating system support Windows 10 IoT Enterprise

Memory 16GB

Hybrid option Yes

Storage system Detail

Video storage 8TB / 16TB / 32TB / 48TB

8 HDD bays, SATA

Drive type Western Digital Purple Drives

VMS/OS storage 64GB mSATA SSD

Hot plug disk drives Yes

Optional RAID storage Yes, 5 or 10

Video management system Detail

VMS preloaded Optimized XProtect Professional 2016

Milestone Care Basic Included

Milestone Care Plus Optional

Hardware warranty Three years included

Automatic camera discovery Yes

Setup wizards Yes

Supports ONVIF cameras Yes

Codec support H.264, MJPEG, MPEG4, MxPEG

Multiple video export formats Yes

Pan-tilt-zoom (PTZ) support Yes

Audio support Yes, two-way

Third-party application support Yes

Milestone Interconnect support Yes

Customer Dashboard support Yes, with Milestone Care Plus

Electrical Detail

Power input 200W / 100~240V

Maximum power consumption 90-120W

Environmental Detail

Operation temperature 0~40°C

Storage temperature -20°C ~70°C

Humidity 10~90% relative humidity

(non-condensing)

Other Detail

Regulatory compliance CE (class A), WEEE, FCC (class A), RCM, UL, VCCI, Mexico (CoC), South Africa (CoC)

Product specifications subject to change without notice.

General Detail

Days of recording

Number of cameras

64 128

7 2TB 5TB

15 5TB 10TB

30 10TB 20TB

45 15TB 30TB

60 20TB 40TB

90 30TB --

Milestone

HUSKY TM M50

Front and rear panel Specification

Selecting the right Husky M50

Ordering information

Calculations for 20% motion-based recording for:

5MP @ 4fps 1080p @ 10fps 720p @ 22fps 4CIF @ 60fps

For more precise results, please use the Milestone Husky calculator.

Please contact your local Milestone representative to order Milestone Husky M50.

Front

Rear interfaces A. 3 x COM ports B. 1 x HDMI / 1 x DVI C. 2 x GbE RJ45 D. 4 x USB 3.0 E. 1 x Line-out / MIC-in / Line-in F. 1 x Power switch G. 1 x Power input

A B C D E F G

Description

8x1TB, 8 licenses, i7, 16GB RAM

8x2TB, 8 licenses, i7, 16GB RAM

8x4TB, 8 licenses, i7, 16GB RAM

8x6TB, 8 licenses, i7, 16GB RAM

8x2TB, 8 licenses, i7, 16GB RAM, RAID 5 or 10

8x4TB, 8 licenses, i7, 16GB RAM, RAID 5 or 10

8x6TB, 8 licenses, i7, 16GB RAM, RAID 5 or 10

8x2TB, 8 IP/32 analog licenses, i7, 16GB RAM, Hybrid

Add-on licenses, 4-pack

1 year Care Plus

SKU

HM50-8T-8

HM50-16T-8

HM50-32T-8

HM50-48T-8

HM50-16TR-8

HM50-32TR-8

HM50-48TR-8

HM50-16T-8H

HMCL-4

HMCP-XP

REV A 09/01/10 OA

GENESIS SERIES

Description: 14 AWG 2/C SOL FPL-CL2 Compliance: UL Standards 13 & 1424; NEC Articles 725 & 760

Construction:

Conductor 14 AWG Solid Bare Copper No. of Conductors 2

Insulation Type Polypropylene Color Black, Red Thickness 0.008" nom.

Diameter 0.080" nom.

Lay Length 5.0” nom.

Jacket Type PVC Color Red or White Thickness 0.015" nom.

Diameter 0.190" nom.

Legend (Ink Print) HONEYWELL P/N 4113 2C14 E175105 (UL) FPL OR CL2 SUN RES 75C (RoHS)

W/O# XXXXXX-XXXXXX XXXXX FT DEVICE/ZONE A B C D E F 1 2 3 4 5 6 7 8 9

Properties:

Temperature Rating -20 to 75 oC Operating Voltage 300 Volts max.

Capacitance 22 pf/ft nom.

Impedance 68 Ohms nom.

DC Resistance 2.6 Ohms/M' at 20oC Flame Rating UL 1685 Vertical Tray

Power Limited Fire Alarm Cable

Part No. 4113

Project Information

Company Name:

Address:

City:

State & Zip:

Phone:

Project Name:

City:

State: www.alliedeg.com

E-Z Pull® EMT

• Hot galvanized steel using patented inline Flo-Coat® process for long lasting exterior protection

• E-Z Pull interior coating provides a smooth raceway for fast, easier wire-pulling

• Excellent mechanical protection for conductors

• Ductility for faster and easier bending

• Optimal EMI shielding characteristics

• Listed to Underwriters Laboratories Safety Standard UL 797

• Manufactured in accordance with ANSI C80.3

• Available in sizes 1/2 (16) - 4 (103)

True Color™ EMT

• All the benefits of E-Z Pull EMT

• Instant identification of multiple circuits

• Fire Alarm® Red EMT

• Healthcare Green EMT

• Data Com Blue EMT

• Available in 8 colors

• Available in sizes 1/2 (16) - 4 (103)

Electrical Metallic Tubing (EMT) and True Color™ EMT

Black EMT

• Blends in dark colored areas

Fire Alarm® EMT

• Emergency circuits

• Fire alarm and Security systems

Orange EMT

• Construction/research areas

• Fiber optic systems

• Auto repair/maintenance

Yellow EMT

• High voltage wiring

• Caution areas

• Special equipment

Green EMT

• Hospital and healthcare areas

• Nurse call stations

• Critical circuits

Blue EMT

• Low voltage wiring

• Data com/video

• Network security

Purple EMT

• Specialty wiring systems

• Security systems

White EMT

• Blends in light colored areas

Silver EMT

• Standard Use

• Contemporary architecture

Quality Electrical Metallic Tubing

Identify Important Circuits Instantly!

True Color™ Applications

NOTE: Special orders are non-cancelable, non-returnable and non-refundable www.alliedeg.com 16100 S. Lathrop Ave., Harvey, IL 60426 Phone / 708.339.1610 • Toll-Free / 800.882.5543

Manufactured for Long Life Allied Tube & Conduit® EMT is precision manufactured from high grade mild strip steel for exceptional durability and long-lasting life. Allied EMT is hot galvanized using a patented inline Flo-Coat® process. This process combines zinc, a conversion coating, and a clear organic polymer topcoat to form a triple layer of protection against corrosion and abrasion.

E-Z Pull® EMT combines strength with ductility, providing easy bending, cutting and joining while resisting flattening, kinking and splitting. Available in sizes 1/2 (16) - 4 (103).

Coatings Allied’s EMT (Electrical Metallic Tubing) has a special low friction ID coating called E-Z Pull that greatly improves the slip properties between conduit and wire. With E-Z Pull EMT, wire pulls through the EMT smoothly and easily, making installation easier and faster.

EMI Shielding Allied EMT is very effective in reducing electromagnetic field levels for encased power distribution circuits, shielding computers and other sensitive electronic equipment from the effects of electromagnetic interference.

For more information on EMT shielding, visit www.alliedeg.com to obtain the GEMI (Grounding and Electro- Magnetic Interference) software analysis program.

Codes & Standards Compliance Allied EMT is listed to Underwriters Laboratories Safety Standard UL 797 and meets ANSI C80.3. These standards have been adopted as federal specifications in lieu of WWC

563. EMT is recognized as an equipment grounding conductor by NEC Section 250-118. Documentation for compliance with NEC Article 250 is also available in the GEMI (Grounding and Electro-Magnetic Interference) analysis software and related research studies found at the www.alliedeg.com website.

Installation of EMT shall be in accordance with the National Electrical Code and the UL listing information. Allied EMT is listed in category FJMX. Master bundles conform to NEMA Standard RN2.

Specification Data To specify Allied EMT, include the following: Electrical Metallic Tubing shall be equal to that manufactured by Allied Tube & Conduit Corporation. EMT shall be hot galvanized steel O.D.

with an organic corrosion resistant I.D. coating, and shall be listed to UL Safety Standard 797 and manufactured in accordance with ANSI C80.3.

Electrical Metallic Tubing (EMT) and True Color™ EMT in mm in mm lb kg ft m ft m 1/2 16 0.706 17.93 0.042 1.07 30 13.6 7000 2135 3500 1066.8 3/4 21 0.922 23.42 0.049 1.24 46 20.9 5000 1525 2500 762.0 1 27 1.163 29.54 0.057 1.45 67 30.4 3000 915 1500* 457.2 1-1/4 35 1.510 38.35 0.065 1.65 101 45.8 2000 610 2000 609.6 1-1/2 41 1.740 44.20 0.065 1.65 116 52.6 1500 457.5 1500 457.2 2 53 2.197 55.80 0.065 1.65 148 67.1 1200 366.0 1200 365.7 2-1/2 63 2.875 73.03 0.072 1.83 216 98.0 610 186.1 610 185.9 3 78 3.500 88.90 0.072 1.83 263 119.3 510 155.6 510 155.4 3-1/2 91 4.000 101.60 0.083 2.11 349 158.3 370 112.9 370 112.7 4 103 4.500 114.30 0.083 2.11 393 178.3 300 91.5 300 91.5 1Outside diameter tolerances: +/- .005 in. (.13mm) for trade sizes 1/2 (16mm) through 2 (53mm);

+/- .010 in. (.25mm) for trade sizes 2-1/2 (63mm);

+/- .015 in. (.38mm) for trade size 3 (78mm);

+/- .020 in. (.51mm) for trade sizes 3-1/2 (91mm) and 4 (103mm).

FEATURES & SPECIFICATIONS

*Blue trade size 1 master bundle size: 3000 ft / 915 m ** Other Color Trade Sizes 2 - 4 are available thru special order NOTE: Length = 10 ft. (3.05m) with a tolerance of +/- .25 in. (6.35 mm)

Trade Size

Metric Designator

Approximate

Weight Per

100 Ft. (30.5M)

Outside Diameter1

Nominal Wall Thickness2

Red and Galvanized Master Bundle

Quantity

True Color** Bundle Qty.

Electrical Metallic Tubing (EMT) and True Color™ EMT Listed to Underwriters Laboratories Safety Standard UL 797 Manufactured in accordance with ANSI C80.3 www.alliedeg.com 16100 S. Lathrop Ave., Harvey, IL 60426 Phone / 708.339.1610 • Toll-Free / 800.882.5543

Electrical Metallic Tubing (EMT) Elbows

Trade Size

Metric Designator

Radius (A)1 Offset (B)2 Straight (D)1

Approximate Weight Per 100 Pieces

Standard Package in mm in mm in mm lb kg

1/2 16 4 102 5 7/8 149 1 1/2 38 25 11.3 25 3/4 21 4 1/2 114 7 178 1 1/2 38 46 20.9 50 1 27 5 3/4 146 8 3/4 222 1 7/8 48 84 38.1 25

1 1/4 35 7 1/4 184 10 1/8 257 2 51 144 65.3 20 1 1/2 41 8 1/4 210 11 3/4 298 2 51 193 87.5 15

2 53 9 1/2 241 14 356 2 51 296 134.3 10 2 1/2 63 10 1/2 267 16 1/4 413 3 76 504 228.6 1

3 78 13 330 18 3/4 476 3 1/8 79 701 318.0 1 3 1/2 91 15 381 21 1/4 540 3 1/4 83 1047 474.9 1

4 103 16 406 23 3/8 594 3 3/8 86 1310 594.2 1

EMT 90° Elbows Listed to Underwriters Laboratories Safety Standard UL 797 Manufactured in accordance with ANSI C80.3

Trade Size

Metric Designator

Radius (A)1 Offset (B)2 Offset (C)2 Straight (D)1

Approximate Weight Per 100 Pieces

Standard Package in mm in mm in mm in mm lb kg

1/2 16 4 102 6 1/8 156 2 1/2 64 1 1/2 38 18 8.2 25 3/4 21 4 1/2 114 7 3/8 187 3 1/8 79 1 1/2 38 33 15.0 50 1 27 5 3/4 146 8 3/4 222 3 5/8 92 1 7/8 48 56 25.4 25

1 1/4 35 7 1/4 184 10 1/8 257 4 1/8 105 2 51 97 44.0 20 1 1/2 41 8 1/4 210 13 1/8 333 5 3/8 137 2 51 145 65.8 15

2 53 9 1/2 241 13 1/8 333 5 1/2 140 2 51 185 83.9 10 2 1/2 63 10 1/2 267 17 1/2 445 7 1/4 184 3 76 360 163.3 1

3 78 13 330 17 1/2 445 7 1/4 184 3 1/8 79 438 198.7 1 3 1/2 91 15 381 26 1/8 664 10 7/8 276 3 1/4 83 873 396.0 1

4 103 16 406 26 1/4 667 10 7/8 276 3 3/8 86 983 445.9 1

EMT 45° Elbows Listed to Underwriters Laboratories Safety Standard UL 797 Manufactured in accordance with ANSI C80.3

1Minimum requirement as per UL Standard 2Dimensions and weights are approximate Sizes 2-1/2 (63) and larger shipped in palletized cartons or bulk.

Also available in the following Degrees (60°, 45°, 30°, 22-1/2°, 15° & 11-1/4°)

1Minimum requirement as per UL Standard 2Dimensions and weights are approximate Sizes 2-1/2 (63) and larger shipped in palletized cartons or bulk.

Also available in the following Degrees (90°, 60°, 30°, 22-1/2°, 15° & 11-1/4°)

45˚ 60˚ 90˚

15˚

45˚

EMT Elbow - Dimen

B

C

A

D

D

B

B

D

A

D www.alliedeg.com 16100 S. Lathrop Ave., Harvey, IL 60426 Phone / 708.339.1610 • Toll-Free / 800.882.5543

Trade Size

Metric Designator

Radius (A) Offset (B)2 Straight (D)2

Approximate Weight Per 100 Pieces in mm in mm in mm lb kg

1 27 12 305 20 5/8 524 8 5/8 219 201 91.2 1 27 15 381 24 1/4 616 9 1/4 235 235 106.6 1 27 18 457 27 7/8 708 9 7/8 251 268 121.6 1 27 24 610 34 5/8 879 10 5/8 270 329 149.2 1 27 30 762 41 1041 11 279 385 174.6 1 27 36 914 46 3/4 1187 10 3/4 273 436 197.8 1 27 42 1067 54 1372 12 305 503 228.2 1 27 48 1219 60 1/4 1530 12 1/4 311 558 253.1

1 1/4 35 12 305 20 5/8 524 8 5/8 219 303 137.4 1 1/4 35 15 381 24 1/4 616 9 1/4 235 354 160.6 1 1/4 35 18 457 27 7/8 708 9 7/8 251 404 183.3 1 1/4 35 24 610 34 5/8 879 10 5/8 270 497 225.4 1 1/4 35 30 762 41 1041 11 279 581 263.5 1 1/4 35 36 914 46 3/4 1187 10 3/4 273 657 298.0 1 1/4 35 42 1067 54 1372 12 305 758 343.8 1 1/4 35 48 1219 60 1/4 1530 12 1/4 311 842 381.9 1 1/2 41 15 381 24 1/4 616 9 1/4 235 406 184.2 1 1/2 41 18 457 27 7/8 708 9 7/8 251 464 210.5 1 1/2 41 24 610 34 5/8 879 10 5/8 270 570 258.6 1 1/2 41 30 762 41 1041 11 279 667 302.6 1 1/2 41 36 914 46 3/4 1187 10 3/4 273 754 342.0 1 1/2 41 42 1067 54 1372 12 305 870 394.6 1 1/2 41 48 1219 60 1/4 1530 12 1/4 311 967 438.6

2 53 15 381 24 1/4 616 9 1/4 235 518 235.0 2 53 18 457 27 7/8 708 9 7/8 251 592 268.5 2 53 24 610 34 5/8 879 10 5/8 270 728 330.2 2 53 30 762 41 1041 11 279 851 386.0 2 53 36 914 46 3/4 1187 10 3/4 273 962 436.4 2 53 42 1067 54 1372 12 305 1110 503.5 2 53 48 1219 60 1/4 1530 12 1/4 311 1233 559.3

2 1/2 63 18 457 27 7/8 708 9 7/8 251 864 391.9 2 1/2 63 24 610 34 5/8 879 10 5/8 270 1062 481.7 2 1/2 63 30 762 41 1041 11 279 1242 563.4 2 1/2 63 36 914 46 3/4 1187 10 3/4 273 1404 636.9 2 1/2 63 42 1067 54 1372 12 305 1620 734.8 2 1/2 63 48 1219 60 1/4 1530 12 1/4 311 1800 816.5

EMT Large Radius 90° Elbows Listed to Underwriters Laboratories Safety Standard UL 797 Manufactured in accordance with ANSI C80.3

2For information only, not a requirement as per UL Standard Chart continued on the next page Sizes 2-1/2 (63) and larger shipped in palletized cartons or bulk.

Also available in the following Degrees (60°, 45°, 30°, 22-1/2°, 15° & 11-1/4°)

Electrical Metallic Tubing (EMT) Elbows

45˚ 60˚ 90˚

B

B

A www.alliedeg.com 16100 S. Lathrop Ave., Harvey, IL 60426 Phone / 708.339.1610 • Toll-Free / 800.882.5543

Trade Size

Metric Designator

Radius (A) Offset (B)2 Straight (D) 2 Approximate Weight Per 100 Pieces in mm in mm in mm lb kg 3 78 15 381 24 1/4 616 9 1/4 235 921 417.8 3 78 18 457 27 7/8 708 9 7/8 251 1052 477.2 3 78 24 610 34 5/8 879 10 5/8 270 1293 586.5 3 78 30 762 41 1041 11 279 1512 685.8 3 78 36 914 46 3/4 1187 10 3/4 273 1710 775.7 3 78 42 1067 54 1372 12 305 1973 895.0 3 78 48 1219 60 1/4 1530 12 1/4 311 2192 994.3

3 1/2 91 18 457 27 7/8 708 9 7/8 251 1396 633.2 3 1/2 91 24 610 34 5/8 879 10 5/8 270 1716 778.4 3 1/2 91 30 762 41 1041 11 279 2007 910.4 3 1/2 91 36 914 46 3/4 1187 10 3/4 273 2269 1029.2 3 1/2 91 42 1067 54 1372 12 305 2618 1187.5 3 1/2 91 48 1219 60 1/4 1530 12 1/4 311 2908 1319.1

4 103 24 610 34 5/8 879 10 5/8 270 1932 876.4 4 103 30 762 41 1041 11 279 2260 1025.1 4 103 36 914 46 3/4 1187 10 3/4 273 2555 1158.9 4 103 42 1067 54 1372 12 305 2948 1337.2 4 103 48 1219 60 1/4 1530 12 1/4 311 3275 1485.5

EMT Large Radius 90° Elbows (continued) Listed to Underwriters Laboratories Safety Standard UL 797 Manufactured in accordance with ANSI C80.3

2For information only, not a requirement as per UL Standard Sizes 2-1/2 (63) and larger shipped in palletized cartons or bulk.

Also available in the following Degrees (60°, 45°, 30°, 22-1/2°, 15° & 11-1/4°)

Electrical Metallic Tubing (EMT) Elbows

45˚ 60˚ 90˚

B

B

D

Steel City ® Commercial Fittings

In this section...

Steel City® Commercial Fittings

Overview ....................................................................E-520–E-521

Electrical Metallic Tubing (EMT) Fittings ......................E-522–E-529

Rigid Conduit/IMC Fittings ...........................................E-530–E-537

Non-Metallic Sheathed Cable Fittings..........................E-538–E-539

Armored Cable/Flexible Metallic Conduit Fittings .........E-540–E-545

Accessories ................................................................E-546–E-549

Liquidtight Flexible Metallic Conduit Fittings:

Zinc Die Cast .............................................................E-550–E-552 jkonen Line jkonen Line jkonen Line jkonen Line jkonen Line jkonen Line www.tnb.com United States Tel: 901.252.8000 800.816.7809 Fax: 901.252.1354

Technical Services Tel: 888.862.3289

E-520

Co nd ui t &

F itt in gs

S te el

C ity

C om m er ci al F itt in gs

Overview

Couplings and Connectors Superior Quality and Design

• Strict tolerances throughout fitting ensures a straight conduit run with no sagging over extreme lengths

• Chamfered entry provides lead-in for conduit insertion

Dependable Pipe Stop

• 360° groove traveling the circumference ensures that conduit forcefully inserted won’t break through to the opposite side of the fitting. Also, it does not exceed thickness of EMT and prevents interference with pulling conductors

Extra-Large Head Tri-Drive Set Screw

• Accommodates Phillips, slotted and square drives

Enhanced Locknut Construction

• Heavy-duty turned sharp teeth, double-threaded

Advantages of Steel City® Commercial Conduit Fittings

Steel City® Conduit Fittings provide long-lasting service in commercial, industrial and residential construction. Our fittings are manufactured within strict tolerances to maintain consistent performance. Installers can be assured that every fitting with the Steel City® name will work every time. So when you select Steel City® Conduit Fittings, that means fewer headaches and call-backs.

Steel City® products symbolize the highest quality standards in manufacturing and innovative design, with one of the most complete offerings available. Contact a T&B distributor nearest you to select the right Steel City® product for your requirements.

Steel City® Fittings

Compression Fittings Dependable Pipe Stop

• Strong, thick protrusion that does not exceed thickness of EMT. Keeps forcefully inserted conduit from breaking through the opposite side of the coupling, while not interfering with the pulling of conductors

Heavy-Duty Thick Steel Body/Glands with Continuous Threading

• True hexagonal shape. The non-circular design has actual flats for gripping power using hand or tool force

Extra-Thick Electro-Plated Zinc Finish

• Ensures corrosion resistance while the clear chromate coating gives the fittings their quality shine and luster

Tel: 901.252.8000 800.816.7809 Fax: 901.252.1354

Technical Services Tel: 888.862.3289www.tnb.com

E-521

Conduit & Fittings —

Steel City ® Com m ercial Fittings

Overview Here’s How the Steel City® Catalog Number System Works

BG – Bushings, Grounding

BI – Bushings, Insulated

BL – Blanks

BR – Rigid Spacer

BS – Box Spacer

BT – Thinwall Spacer

BU – Bushings

CB – Clamp Back

CP – Cable Protector

EK – 3-Piece Coupling

FA – Fire Alarm

GA – Ground Clamp (Armored Ground Wire)

GC – Ground Clamp

H – Hub

HA – Heavywall Adapter

HC – Heavywall Connector

HK – Heavywall Coupling

HL – Heavywall Elbow

HO – Heavywall Offset

HS – Heavywall Strap

LG – Locknut, Grounding

LN – Locknut

LT – Liquidtight

NC – Non-Metallic Sheathed Cable Connector

NS – Non-Metallic Sheathed Cable Strap

RB – Reducing Bushings

RT – Raintight

SH – Service Entrance Fitting

SL – Service Ells

SR – Sealing Rings

SS – Stainless Steel

LS – Locknut, Sealing

TC – Thinwall Connectors

TK – Thinwall Couplings

TL – Thinwall Elbow

TO – Thinwall Offset

TS – Thinwall Strap

TX – Thinwall to Flexible Metallic Conduit Fitting

UC – Utility Connector

USA – Made in USA

WA – Washer

XC – Armored Cable or Flexible Metallic Conduit Connector

XK – Armored Cable or Flexible Metallic Conduit Coupling

1st Digit — Material 1 = Steel

2 = Die Cast

3 = Combination Steel and Die Cast

4 = Malleable

5 = Plastic

6 = Aluminum

7 = Steel Insulated

8 = Die Cast Insulated

9 = Malleable Insulated

2nd Digit — Method 1 = Compression

2 = Set Screw

3 = Other

3rd/4th Digit — Size 0 = 3⁄8"

1 = 1⁄2"

2 = 3⁄4"

3 = 1"

4 = 11⁄4"

5 = 11⁄2"

6 = 2"

7 = 21⁄2"

8 = 3"

9 = 31⁄2"

10 = 4"

11 = 5"

12 = 6"

Easy-to-identify alphabetical prefixes:

A few examples of the three-digit identification system for thinwall fittings are:

TK-111A: 1⁄2" steel, compression-type coupling

TC-714A: 11⁄4" steel insulated compression-type connector

TC-822SC: 3⁄4" die-cast, insulated, set-screw type connector

Tel: 901.252.8000 800.816.7809 Fax: 901.252.1354

Technical Services Tel: 888.862.3289

E-522

Co nd ui t &

F itt in gs

S te el

C ity

C om m er ci al F itt in gs

Electrical Metallic Tubing (EMT) Fittings Ideal for use in Recovery Act projects requiring MADE IN USA components!

Made In USA Steel EMT Fittings

High-Quality Steel Construction — Made in the USA!

• Available in sizes for 1⁄2" to 4" electrical metallic tubing (EMT)

• Steel construction for strength and durability

• Electroplated zinc finish for corrosion protection

• Use couplings to join two lengths of EMT

• Use connectors (insulated or non-insulated) to join EMT to a box or enclosure

• Set-screw couplings and connectors are for use in dry locations and are concrete-tight when taped

• Compression couplings and connectors are concrete-tight

• MADE IN USA for use on American Recovery and Reinvestment Act (ARRA) projects

NEW!NEW!

800.816.7809 Fax: 901.252.1354

Technical Services Tel: 888.862.3289www.tnb.com

E-523

Conduit & Fittings —

Steel City ® Com m ercial Fittings

Electrical Metallic Tubing (EMT) Fittings

Insulated EMT Set-Screw Connectors

Insulated EMT Set-Screw Connector (TC729US)

Insulated EMT Compression Connector (TC7110US)

EMT Set-Screw Coupling

(TK128US)

TC722US

TC724US

EMT Compression Couplings

TK114US

TK111US

CAt. NO. HUb SizE

EMT Compression Connectors, Non-Insulated tC111US 1⁄2" tC112US 3⁄4" tC113US 1" tC114US 11⁄4" tC115US 11⁄2" tC116US 2" tC117US 21⁄2" tC118US 3" tC119US 31⁄2" tC1110US 4" EMT Compression Connectors, Insulated tC711US 1⁄2" tC712US 3⁄4" tC713US 1" tC714US 11⁄4" tC715US 11⁄2" tC716US 2" tC717US 21⁄2" tC718US 3" tC719US 31⁄2" tC7110US 4"

CAt. NO. HUb SizE

EMT Set-Screw Connectors, Non-Insulated tC121US 1⁄2" tC122US 3⁄4" tC123US 1" tC124US 11⁄4" tC125US 11⁄2" tC126US 2" tC127US 21⁄2" tC128US 3" tC129US 31⁄2" tC1210US 4" EMT Set-Screw Connectors, Insulated tC721US 1⁄2" tC722US 3⁄4" tC723US 1" tC724US 11⁄4" tC725US 11⁄2" tC726US 2" tC727US 21⁄2" tC728US 3" tC729US 31⁄2" tC7210US 4"

CAt. NO. HUb SizE

EMT Compression Couplings tK111US 1⁄2" tK112US 3⁄4" tK113US 1" tK114US 11⁄4" tK115US 11⁄2" tK116US 2" tK117US 21⁄2" tK118US 3" tK119US 31⁄2" tK1110US 4" EMT Set-Screw Couplings tK121US 1⁄2" tK122US 3⁄4" tK123US 1" tK124US 11⁄4" tK125US 11⁄2" tK126US 2" tK127US 21⁄2" tK128US 3" tK129US 31⁄2" tK1210US 4"

Made In USA Steel EMT Fittings

Tel: 901.252.8000 800.816.7809 Fax: 901.252.1354

Technical Services Tel: 888.862.3289

E-524

Electrical Metallic Tubing (EMT) Fittings

Co nd ui t &

F itt in gs

S te el

C ity

C om m er ci al F itt in gs Insulated

“A” CAt. No.

CoNduIt SIzE (IN.)

INNEr PACk outEr PACk tC-721A 1⁄2 50 500 tC722A 3⁄4 50 250 tC-723A 1 25 100 tC724A 11⁄4 — 25 tC725A 11⁄2 — 25 tC726A 2 — 25 tC727A 21⁄2 — 10 tC728A 3 — 5 tC729A 31⁄2 — 5 tC7210A 4 — 5 tC721A-FA 1⁄2 50 500 tC722A-FA 3⁄4 50 250 tC723A-FA 1 25 100 UL File No. E-16592.

FA — Fire Alarm.

Non-Insulated

“A” CAt. No.

CoNduIt SIzE (IN.)

INNEr PACk outEr PACk tC121A 1⁄2 50 500 tC122A 3⁄4 50 250 tC123A 1 25 100 tC124A 11⁄4 — 25 tC125A 11⁄2 — 25 tC126A 2 — 25 tC127A 21⁄2 — 10 tC128A 3 — 5 tC129A 31⁄2 — 5 tC1210A 4 — 5 tC121A-FA 1⁄2 50 500 tC122A-FA 3⁄4 50 250 tC123A-FA 1 25 100 UL File No. E-16592.

FA — Fire Alarm.

Set-Screw Connectors — Steel

• Concrete tight when taped

• Zinc plated

• 1⁄2"–4" concrete tight

• Zinc plated

• RT — Raintight

Steel City® Raintight EMT Compression Fittings feature a distinctive design and a vibrant gold gland nut, enabling inspectors to visually inspect conformance from a distance. There’s no close-up inspection required!

Compression Connectors — Steel

• Concrete tight when taped

• Zinc plated

• Fire Alarm (FA) painted red for fire alarm identification

Set-Screw Couplings — Steel

“A” CAt. No.

CoNduIt SIzE (IN.)

INNEr PACk outEr PACk tk128A 3 — 5 tk129A 31⁄2 — 5 tk1210A 4 — 5 tk121A-FA 1⁄2 50 500 tk122A-FA 3⁄4 50 250 tk123A-FA 1 25 100 UL File No. E-16592.

“A” CAt. No.

CoNduIt SIzE (IN.)

INNEr PACk outEr PACk tk121A 1⁄2 50 500 tk122A 3⁄4 50 250 tk123A 1 25 100 tk124A 11⁄4 — 25 tk125A 11⁄2 — 25 tk126A 2 — 25 tk127A 21⁄2 — 10 UL File No. E-16592.

Insulated

“A” CAt. No.

CoNduIt SIzE (IN.)

INNEr PACk outEr PACk tC711A 1⁄2 50 500 tC712A 3⁄4 50 250 tC713A 1 25 100 tC714A 11⁄4 — 25 tC715A 11⁄2 — 25 tC716A 2 — 25 tC717A 21⁄2 — 10 tC718A 3 — 5 tC719A 31⁄2 — 5 tC7110A 4 — 5 tC711A-rt 1⁄2 50 500 tC712A-rt 3⁄4 50 250 tC713A-rt 1 25 100 tC714A-rt* 11⁄4 — 25 tC715A-rt* 11⁄2 — 25 tC716A-rt* 2 — 25 tC717Art 21⁄2 — 10 tC718Art 3 — 5 tC719Art 31⁄2 — 5 tC7110Art 4 — 5 UL File No. E-16592.

Non-Insulated

“A” CAt. No.

CoNduIt SIzE (IN.)

INNEr PACk outEr PACk tC111A 1⁄2 50 500 tC112A 3⁄4 50 250 tC113A 1 25 100 tC114A* 11⁄4 — 25 tC115A* 11⁄2 — 25 tC116A* 2 — 25 tC117A 21⁄2 — 10 tC118A 3 — 5 tC119A 31⁄2 — 5 tC1110A 4 — 5 tC111A-rt 1⁄2 50 500 tC112A-rt 3⁄4 50 250 tC113A-rt 1 25 100 tC114A-rt* 11⁄4 — 25 tC115A-rt* 11⁄2 — 25 tC116A-rt* 2 — 25 tC117Art 21⁄2 — 10 tC118Art 3 — 5 tC119Art 31⁄2 — 5 tC1110Art 4 — 5 UL File No. E-16592.

*O-rings are supplied.

Note: A sealing ring is required when fitting is used outside, on the top and on the sides of an enclosure.

800.816.7809 Fax: 901.252.1354

Technical Services Tel: 888.862.3289www.tnb.com

E-525

Electrical Metallic Tubing (EMT) Fittings

Conduit & Fittings —

Steel City ® Com m ercial Fittings

Steel City® Raintight EMT Compression Fittings feature a distinctive design and a vibrant gold gland nut, enabling inspectors to visually inspect conformance from a distance. There’s no close-up inspection required!

CAt. No. dESCrIPtIoN Std. CtN.

tC101-SC 1⁄2" Uninsulated 500 tC-102-SC 3⁄4" Uninsulated 250 tC-701-SC 1⁄2" Insulated 500 tC-702-SC 3⁄4" Insulated 250 UL Listing No. E16592, CSA Listing No. LR-12798.

Installation using either slotted or Phillips screwdriver head, 35-in.-lb. of torque onto the EMT.

Note: Excessive torque could damage EMT or housing.

• Simple, one-piece installation with no locknuts

• Available in insulated or non-insulated throat

• Screw designed for exceptional pullout resistance

• Captive screw ensures that the screw is intact for installation and resists backing out after installation

• Corrosion-resistant, zinc-chromatic plating

• Positive grounding

• Vibration-resistant screw design

• UL Listed and CSA certified

CAt. No.

CoNduIt SIzE (IN.)

dImENSIoNS (IN.)

Std.

CtN.A B C

Ltt 111 1⁄2 EMT to 1⁄2 Liquidtight 13⁄4 15⁄16 11⁄8 100 Ltt-112 3⁄4 EMT to 3⁄4 Liquidtight 13⁄4 111⁄64 13⁄8 50 Ltt-113 1 EMT to 1 Liquidtight 115⁄16 11⁄2 13⁄4 25

CAt. No.

CoNduIt SIzE (IN.)

dImENSIoNS (IN.)

Std.

CtN.A B C

LtH 111 1⁄2 Rigid to 1⁄2 Liquidtight 17⁄8 11⁄8 11⁄8 100

A

C Corner

B Corner

A

C Corner

B Corner

• Steel

• Raintight

• Zinc plated

Compression Couplings — Steel

• Steel

• Raintight

• Zinc plated

EMT LOK Conduit Connector — Steel

Combination Compression Couplings — Heavywall to Liquidtight Flexible Metal Conduit — Steel

Combination Compression Couplings — Thinwall to Liquidtight Flexible Metal Conduit — Steel

• 1⁄2"–4" concrete tight

• Zinc plated

• RT — Raintight

“A” CAt. No.

CoNduIt SIzE (IN.)

INNEr PACk outEr PACk tk111A 1⁄2 50 250 tk112A 3⁄4 50 250 tk113A 1 25 100 tk114A 11⁄4 — 25 tk115A 11⁄2 — 25 tk116A 2 — 25 tk117A 21⁄2 — 10 tk118A 3 — 5 tk119A 31⁄2 — 5 tk1110A 4 — 5 UL File No. E-16592.

“A” CAt. No.

CoNduIt SIzE (IN.)

INNEr PACk outEr PACk tk111A-rt 1⁄2 50 250 tk112A-rt 3⁄4 50 250 tk113A-rt 1 25 100 tk114A-rt 11⁄4 — 25 tk115A-rt 11⁄2 — 25 tk116A-rt 2 — 25 tk117A-rt 21⁄2 — 10 tk118A-rt 3 — 5 tk119A-rt 31⁄2 — 5 tk1110A-rt 4 — 5 UL File No. E-16592.

Tel: 901.252.8000 800.816.7809 Fax: 901.252.1354

Technical Services Tel: 888.862.3289

E-526

Electrical Metallic Tubing (EMT) Fittings

Co nd ui t &

F itt in gs

S te el

C ity

C om m er ci al F itt in gs

A

B cat. No.

coNduit SizE (iN.)

diMENSioNS (iN.)

Std.

ctN.a B

Non-Insulated tc-211-Sc 1⁄2 11⁄4 1 500 tc-212-Sc 3⁄4 111⁄32 15⁄32 250 tc-213-Sc 1 129⁄64 115⁄32 200 tc-214-Sc 11⁄4 113⁄16 127⁄32 100 tc-215-Sc 11⁄2 17⁄8 21⁄16 40 tc-216-Sc 2 25⁄32 217⁄32 20 tc-217-Sc 21⁄2 245⁄64 31⁄4 12 tc-218-Sc 3 27⁄8 315⁄16 12 tc-219-Sc 31⁄2 247⁄64 47⁄16 10 tc-2110-Sc 4 213⁄16 415⁄16 6 UL File No. E-16592 — 1⁄2"–4". CSA File No. LR-12798 — 1⁄2"–2".

• 1⁄2"–4" concrete tight cat. No.

oFFSEt

(iN.)

coNduit SizE (iN.)

diMENSioNS (iN.)

Std.

ctN.a B to-211Sc 3⁄8 1⁄2 213⁄64 1 200 UL File No. E-16592.

A

B

A

B cat. No.

coNduit SizE (iN.)

diMENSioNS (iN.)

Std. ctN.a B tL-291 1⁄2 1.81 1.00 100 tL-292 3⁄4 2.00 1.25 50 UL File No. E-16592.

CSA File No. LR-12798.

• Concrete tight when taped

A

B cat. No.

coNduit SizE (iN.)

diMENSioNS (iN.)

Std.

ctN.a B tK-211-Sc 1⁄2 11⁄2 13⁄32 500 tK-212-Sc 3⁄4 15⁄8 15⁄16 250 tK-213-Sc 1 17⁄8 145⁄64 200 tK-214-Sc 11⁄4 113⁄16 23⁄32 100 tK-215-Sc 11⁄2 29⁄32 221⁄64 40 tK-216-Sc 2 211⁄32 229⁄32 20 tK-217-Sc 21⁄2 313⁄64 311⁄64 12 tK-218-Sc 3 37⁄32 41⁄2 12 tK-219-Sc 31⁄2 39⁄64 51⁄16 10 tK-2110-Sc 4 33⁄16 541⁄64 6 UL File No. E-16592 — 1⁄2"–4".

CSA File No. LR-12798 — 1⁄2"–11⁄4", 21⁄2"–4".

• 1⁄2"–4" concrete tight

Capped Corner Couplings — Die-Cast Zinc

Compression Couplings — Die-Cast Zinc

Compression Connectors — Die-Cast Zinc

Offset Compression Connectors — Die-Cast Zinc cat. No.

coNduit SizE (iN.)

diMENSioNS (iN.)

Std.

ctN.a B

Insulated tc-811-Sc 1⁄2 123⁄64

63⁄64 500 tc-812-Sc 3⁄4 115⁄32

15⁄16 250 tc-813-Sc 1 135⁄64 115⁄32 200 tc-814-Sc 11⁄4 129⁄32 127⁄32 100 tc-815-Sc 11⁄2 131⁄32 21⁄16 40 tc-816-Sc 2 21⁄4 217⁄32 20 tc-817-Sc 21⁄2 225⁄32 31⁄4 12 tc-818-Sc 3 231⁄32 315⁄16 12 tc-819-Sc 31⁄2 227⁄32 47⁄16 10 tc-8110-Sc 4 229⁄32 415⁄16 6

800.816.7809 Fax: 901.252.1354

Technical Services Tel: 888.862.3289www.tnb.com

E-527

Electrical Metallic Tubing (EMT) Fittings

Conduit & Fittings —

Steel City ® Com m ercial Fittings

Offset Set-Screw Connectors — Die-Cast Zinc cat. No.

coNduit SizE (iN.)

a (iN.)

B (iN.)

Std.

ctN.

tc-221 SEriES tc-821 SEriES

Non-Insulated tc-221-Sc 1⁄2 15⁄32 117⁄64

15⁄16 500 tc-222-Sc 3⁄4 113⁄32 133⁄64 15⁄32 250 tc-223-Sc 1 19⁄16 121⁄32 127⁄64 200 tc-224-Sc 11⁄4 115⁄16 21⁄32 113⁄16 100 tc-225-Sc 11⁄2 29⁄32 23⁄8 23⁄64 40 tc-226-Sc 2 233⁄64 239⁄64 217⁄32 20 tc-227-Sc 21⁄2 33⁄16 39⁄32 319⁄64 12 tc-228-Sc 3 325⁄64 331⁄64 41⁄16 12 tc-229-Sc 31⁄2 331⁄64 319⁄32 417⁄32 10 tc-2210-Sc 4 347⁄64 353⁄64 51⁄16 6 UL File No. E-16592 — 1⁄2"–2".

UL File No. E-23018 — 21⁄2"–4".

CSA File No. LR-12798 — 1⁄2"–1", 21⁄2"–4".

• Concrete tight when taped cat. No. oFFSEt (iN.)

coNduit SizE (iN.)

diMENSioNS (iN.)

Std.

ctN.a B c to 221 3⁄8 1⁄2 2.00 .90 .37 100 to 222 3⁄4 3⁄4 2.98 1.16 .25 100 to-223 3⁄4 1 3.15 1.42 .75 100 UL File No. E-16592.

CSA File No. LR-18130M57.

A

B C

A

B

• Concrete tight when taped cat. No.

coNduit SizE (iN.)

diMENSioNS (iN.)

Std. ctN.a B tK-221 1⁄2 133⁄64 59⁄64 500 tK-222 3⁄4 129⁄32 15⁄32 250 tK-223 1 2 17⁄16 200 tK-224 11⁄4 233⁄64 127⁄32 100 tK-225 11⁄2 227⁄32 21⁄16 40 UL File No. E-16592 — 1⁄2"–2".

UL File No. E-23018 — 21⁄2"–4".

CSA File No. LR-12798 — 1⁄2"–11⁄4", 21⁄2"–4".

A

B

• Concrete tight when taped

Set-Screw Couplings — Die-Cast Zinc

Set-Screw Connectors — Die-Cast Zinc cat. No.

coNduit SizE (iN.)

diMENSioNS (iN.)

Std.

ctN.a B

Ht 221 1⁄2 EMT to 1⁄2 Rigid 1.67 1.07 500 Ht-222 3⁄4 EMT to 3⁄4 Rigid 1.98 1.29 250 Ht-223 1 EMT to 1 Rigid 2.15 1.58 100 UL File No. E-23018.

A

B

• Concrete tight when taped

Combination Set-Screw Couplings — Thinwall to Heavywall — Die-Cast Zinc cat. No.

coNduit SizE (iN.)

a (iN.)

B (iN.)

Std.

ctN.

tc-221 SEriES tc-821 SEriES

Insulated tc-821-Sc 1⁄2 15⁄32 117⁄64

15⁄16 500 tc-822-Sc 3⁄4 113⁄32 133⁄64 15⁄32 250 tc-823-Sc 1 19⁄16 121⁄32 127⁄64 200 tc-824-Sc 11⁄4 115⁄16 21⁄32 113⁄16 100 tc-825-Sc 11⁄2 29⁄32 23⁄8 23⁄64 40 tc-826-Sc 2 233⁄64 239⁄64 217⁄32 20 tc-827-Sc 21⁄2 33⁄16 39⁄32 319⁄64 12 tc-828-Sc 3 325⁄64 331⁄64 41⁄16 12 tc-829-Sc 31⁄2 331⁄64 319⁄32 417⁄32 10 tc-8210-Sc 4 347⁄64 353⁄64 51⁄16 6 UL File No. E-16592 — 1⁄2"–2".

UL File No. E-23018 — 21⁄2"–4".

CSA File No. LR 12798 — 1⁄2"–2".

cat. No.

coNduit SizE (iN.)

diMENSioNS (iN.)

Std. ctN.a B tK-226a 2 313⁄32 21⁄2 20 tK-227 21⁄2 47⁄32 319⁄64 12 tK-228 3 411⁄16 43⁄64 12 tK-229 31⁄2 427⁄32 417⁄32 10 tK-2210 4 515⁄32 49⁄16 6

Tel: 901.252.8000 800.816.7809 Fax: 901.252.1354

Technical Services Tel: 888.862.3289

E-528

Electrical Metallic…