Statement of Work SOW Grader.pdf

DEPARTMENT OF THE AIR

FORCE 75TH CIVIL ENGINEER

SQUADRON (AFMC) HILL AIR

FORCE BASE UTAH

Work Task: 15474058 Location: Thermal Treatment Unit/UTTR/50037 Project Title: Road Grader Rental for FY25 Capital Project:

Project Manager: Darrell Leslie, NH-III, 75 CES/CEORV

Statement of Work for Road Grader

1. Introduction

This Statement of Work (SOW) outlines the requirements and specifications for the rental of a road grader for Thermal Treatment Unit (TTU) operations for FY 25

2. Scope of Work:

The grader shall be suitable for heavy-duty industrial use in construction projects. The grader should have a 14-16 foot cutting edge blade and equipped with a rear mount ripper. The road grader should have a maximum blade position angle of 65 degrees and can cut to a depth of 18 inches. The rear ripper should have a penetration force of ~ 20,00 lbs. and a pry-out force of ~

30,000 lbs. The grader must comply with all relevant safety standards and regulations.

3. Period of Performance: 30 June - 30 Sept 25

4. Specifications

Engine Power: ~ 250 – 300 HP

Base Power: ~ 240 hp

Blade pull – Base GVW: ~ 20K lbs.

Blade pull – Maximum GVW: ~49K lbs.

Blade Type and size: Cutting edge, ~ 16 feet

Cutting edge width: ~8 inches

Cutting edge thickness: ~ ¾ inch

Blade cut angle (left or right): 90 degrees

Maximum lift above ground: ~17.5 inches

Maximum depth of cut: ~ 18 inches

Ripping depth: ~ 16 inches

Penetration force: ~ 23K lbs.

Pry out force: ~ 32K lbs.

Operating Weight: ~ 55K lbs.

5. Delivery Requirements

The road grader must be delivered to 75 CES/CEOR (Range Support Flight/Utah Test and

Training Range) by NLT 1 May 2025.

Delivery includes assembly, testing, and training of personnel on operation and maintenance.

6. Warranty and Support

The grader should come with a manufacturer's warranty. Supplier should provide technical support, maintenance services, and spare parts availability for the duration of the warranty and beyond.

7. Vendor Requirements

Vendors must provide a detailed quotation including itemized costs, warranty information, delivery timeline, and any additional services offered. Vendors must be reputable, experienced, and certified to sell and service the specified brand/model of road grader.

8. Acceptance Criteria

Acceptance of the road grader will be based on successful delivery, compliance with specifications, and satisfactory performance during testing.