Statement_of_Work_-_DRAFT_1.docx
DOCX document 21 KB Posted
- Attached to
- GLAC: SNOWPLOW BLADE REPAIR
- Solicitation number
- 140P1426Q0033
About this file
This is a Statement of Work for snowplow blade repair services requested by the National Park Service at Glacier National Park in Montana. The work involves repairing a Henke Manufacturing Model 30-60-12ISR.SLT.SIS1 snowplow blade (Serial Number 28268) through a series of corrective and protective measures designed to restore the blade's alignment and functionality. The specific scope includes removing the cutting-edge and backing supports, straightening the plow blade using appropriate methods and equipment, reattaching both supports, adjusting the cutting edge for proper road surface contact, and applying corrosion-protective paint to all repaired and disturbed metal surfaces.
The performance standard requires the plow blade to be returned in as straight and flat a condition as reasonably achievable given its current state, with all painted surfaces adequately coated for corrosion resistance. The deliverable is a fully restored and assembled snowplow blade with optimized road contact and complete corrosion protection. The blade can be transported within a 50-mile radius from West Glacier, Montana to the repair facility. The procurement is listed as a Pre-Solicitation under Solicitation Number 140P1426Q0033, and interested contractors should submit their information to the Contracting Officer, Kiara Stewart, at kiara_stewart@nps.gov.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sources_Sought_Info_-_GLAC_Snowplow_Blade_Repair_1.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
National Park Service – GLAC: Snowplow Blade Repair Statement of Work (SOW) – DRAFT Project: Henke Snowplow Blade Straightening, Cutting Edge Adjustment, and Surface Protection Specifications: Henke Manufacturing, Model 30-60-12ISR.SLT.SIS1 Serial Number 28268 Scope of Work:
The contractor shall perform corrective and protective work on the plow blade to restore alignment, ensure proper contact with the road surface, and protect repaired areas from corrosion. The work shall include the following:
1. Remove the existing cutting-edge support.
2. Remove the backing support from the plow blade.
3. Straighten the plow blade using appropriate methods and equipment.
4. Reattach the backing support and cutting-edge support after straightening is complete.
5. Adjust the cutting edge to ensure it sits flat against the road surface.
6. Clean, prep, and paint all repaired and disturbed metal surfaces to provide corrosion protection.
Performance Standard:
The plow blade and cutting edge will be returned in a condition that is as straight and flat as reasonably achievable given the existing condition of the equipment. Painted surfaces shall be adequately coated for corrosion resistance.
Deliverable:
A plow blade with backing support and cutting edge reinstalled, properly adjusted for optimal road contact, and all repaired surfaces painted for corrosion protection.
Snowplow blade can be delivered within 50 miles from West Glacier, MT to a repair facility by Glacier National Park.
File details come from the government source that posted it. Updated .