SPSP Marina Life Safety Addendum #1.pdf
PDF 64 KB Posted
- Attached to
- Marina Life Safety Upgrades
- Solicitation number
- BPM042061
- Issued by
- Anne Arundel County, Annapolis City, Maryland
About this file
This document is an Addendum to the Marina Life Safety Upgrades project, which is a state and local contract opportunity in Maryland's Anne Arundel County and the City of Annapolis. The project consists of the Contractor providing all labor, equipment, materials, supplies, insurance, permits, etc., necessary to install life safety devices onto the marina docks in the Sandy Point State Park.
The Addendum clarifies changes to the specifications, specifically regarding the dock bumpers. The bumpers are to be marina grade, manufactured by Chesapeake Dock Outfitters or an approved equal, installed in 4-foot sections, and made of UV inhibitors. The bumpers are to be installed using marine grade #8 finish washers with 1-1/4" stainless steel screws, with 8 screws used on each 4' section. The Addendum also notes that the Pre-Bid meeting minutes and sign-in sheet are made part of this Addendum.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Page 1 of 1 February 7, 2024
Addendum #1
Project No # EC24-09015-25
Marina Life Safety Upgrades
Sandy Point State Park
Answers/Clarifications of issues from the Pre-Bid Meeting held on February 6, 2024.
Please make the following changes in the specifications for the referenced project:
1. Page IV-3, F. MATERIALS AND SUPPLIES:, 2. Material Specifications:
REMOVE: d. Dock Bumpers – Shall be marina grade dock bumpers manufactured by
Chesapeake Dock Outfitters or an approved equal. Bumpers are to be installed in 4-foot sections but may be purchased in larger lengths and cut prior to installation. Bumpers shall be made of UV inhibitors to protect against sunlight.
ADD: d. Dock Bumpers – Shall be marina grade dock bumpers manufactured by
Chesapeake Dock Outfitters or an approved equal. Bumpers are to be installed in 4-foot sections but may be purchased in larger lengths and cut prior to installation. Bumpers shall be made of UV inhibitors to protect against sunlight. Bumpers shall be installed using marine grade #8 finish washers with 1-1/4” stainless steel screws. Finish washers stop the screws from going too far into the bumpers. 8 screws are to be used on each 4’ sections.
Questions arising from Pre-Bid meeting.
See Pre-Bid Meeting Minutes
The Pre-bid meeting minutes and Sign-in sheet are made part of this addendum.
-END OF ADDENDUM NO. 1-
File details come from the government source that posted it. Updated .