C-5_Panel_DD1423_-_Contract_Data_List_Pt_2.docx

CONTINUATION OF DD FORM 1423-1 (DI-SESS-81000E/T) CDRL-3D_DATA-15042

4. Format. 3D Models and Associated Lists shall be in the format as specified on this DD Form 1423-2 and continuation sheet.

5. Content. 3D Models and Associated Lists shall conform to the requirements of ASME Y14.100-2013, Appendices E and F (F-3.5, F-3.6, F-3.7) in conjunction with ASME Y14.41.

6. Reference Documents. Unless otherwise noted, the latest revision of the ASME Standard at the time of solicitation shall apply.

7. Product Drawings/Models and Associated Lists: Product drawings/models and associated lists shall be prepared to provide the design, engineering, and manufacturing information necessary to enable the procurement or manufacture of an item essentially identical to the original item. The product shall be defined to the extent necessary for a competent manufacturer to produce an item, which duplicates the physical, interface, and functional characteristics of the original product, without additional design engineering effort or recourse to the current design activity. Product data shall reflect the approved, tested and accepted configuration of the defined delivered item. This includes but is not limited to special tooling, interface hardware, special test equipment, and support equipment.

8. Data Delivery: All data submittals shall contain a delivery letter and a shipping list. At a minimum, the letter shall contain the contract number, delivery order, and CLIN. At a minimum, the shipping list shall include the document number, revision level, and number of sheets/pages. The data delivered shall be in the same sequence as the shipping list.

______________________________________End of Continuation Sheet__________________________________