Spring Valley State Park Boat Dock.docx
DOCX document 2 MB Posted
- Attached to
- Spring Valley Boat Dock
- Solicitation number
- 70CNR-S1992
- Issued by
- Humboldt County, Nevada
About this file
The document provided is a Request for Proposals (RFP) from the State of Nevada Purchasing Division, on behalf of the Conservation and Natural Resources, Division of State Parks, for the replacement of the boat dock at Spring Valley State Park. The requested scope of work includes the provision of an 800-foot galvanized steel and aluminum dock system with 8-foot-wide by 15-foot-long boat slips, a 5-foot-wide by 24-foot-long aluminum ADA-compliant gangway, and associated hardware and anchoring equipment. The dock sections must be delivered in a modular format and may be disconnected for winter storage. The RFP specifies that the vendor will be responsible for supplying all anchor cable attachment hardware, while the state will provide the concrete anchor blocks.
The RFP does not provide any information regarding pricing terms, set-asides, incumbents, funding requirements or sources, or any other salient commercial details. The RFP is focused on the technical specifications and requirements for the boat dock replacement project, which is located in Lincoln County, Nevada, specifically in the Preston CDP area.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| COST SCHEDULE.docx | DOCX document | |
| Proposed Staff Resume~1.docx | DOCX document | |
| Reference Questionnaire~1.docx | DOCX document | |
| Terms and Conditions for Goods.pdf | ||
| Attachments for Signature~1.pdf | ||
| Federal Laws and Authorities.pdf | ||
| INSURANCE SCHEDULE~3.docx | DOCX document | |
| RFP 70CNR-S1992 - Final.docx | DOCX document | |
| Terms and Conditions for Services~1.pdf | ||
| Quote Instructions.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Spring Valley State Park Boat Dock
RFP 70CNR-S1992
image1.emf
NDSP SV Boat Dock Conceptual drawing for RFP.pdf
8'W x 27'L Dock section
6'W x 26'L Dock section
6'W x 23'L
6'W x 24'L
Spring Valley State Park Boat Dock
Galvanized Steel Dock & Aluminum ADA Gangway
Gangway Specifications:
(1) 5'W x 24'L Aluminum ADA Gangway
- Aluminum Decking, Aluminum ADA Hand Rails w/IPE Cap Rail, and IPE Sideboard along Ramp bottom full length
- Heavy-duty 5th Wheel Assembly Connection to Dock Walkway frame 6" Solid Rubber Wheels on Land End with 3' Transition Plate
(Gangway may be disconnected for winter storage)
Floating Dock Specifications
(8) 8'W x 15'L Boat Slips, plus (2) Inside End-Tie Slips (all fingers connected to Walkway by Piano Hinges)
(4) 8' 9"W x 15'L Boat Slips
(1) 6'W x 103'L Main Walkway Dock (4 sections connected by Piano Hinges)
(1) 8'W x 60'L T-Head Fishing Dock (2 sections connected by Piano Hinges)
- 12" Meeco Galvanized Steel Frame with 2.5" x 2.5" x 3/16" Main Structural Side & End Cords
- 2.5" Square "elevated" Steel Toe Rails as illustrated
- 32"H Triple Handrails w/IPE Cap Rail as illustrated
- 5/4" x 6" Nominal IPE Wood Decking
- Single row 5/4" x 6" IPE Wood Sideboard, full perimeter
- "Flat" Vinyl Fender (black), full perimeter
- 10" Aluminum "S" cleats (48) as illustrated
- (4) LM16 Anchor Cable Winches with Shallow
Fairlead Stands (with 5/8" Cable as illustrated - Total 800 ft))
- Heavy-Duty Floatation (.187 Wall) for 16" - 18" Freeboard and 30 PSF Liveload
ALL Anchor Cable attachment hardware supplied by vendor
- Concrete anchor blocks by NDSP per vendor specifications
Fairleads should not protrude below floatation to allow for grounding of docks
(Dock Sections may be disconnected for winter storage)
6'W x 27'L
Typical 10" Aluminum "S"
Cleat
5'W x 24'L Aluminum ADA Gangway w/ 3' Transition Plate w/6" Wheels
5/8" Galvanized Steel Cable
200 feet
5/8" Galvanized Steel Cable
200 feet
Typical Anchor Cable Winch & Stand w/Shallow Fairlead Docks may be removed for winter storage
3'W x 15'L Finger Dock
8'W x 27'L Dock section
Existing Concrete Gangway Pathway
8' 9"W Slip
8'W Slip
8' 9"W Slip
5th Wheel Assembly
Connection
Typical Concrete Block Anchor
Typical Concrete Deadman
Anchor
Typical 3'W Piano Hinge Finger Connection
2.5" Square Tube Steel Toe Rails
Triple Handrail with IPE Cap Rail
Triple Handrail with IPE Cap Rail
NDSP may remove docks from water for
- Main Structural Frame Cords to be 2 1/2" angle iron
- Walkway Dock broken down into (4) sections with Piano Hinge Connections
- Fishing / T-Head Dock broken down into
(2) sections with Piano Hinge Connections
- ALL Slip Fingers (12) connected with Piano Hinge Connections
Typical 6'W Piano Hinge Connection between dock sections
2.5" Square Tube Steel Toe Rails
Typical 10" Aluminum "S"
Cleat
Typical Anchor Cable Winch & Stand w/Shallow Fairlead Docks may be removed for
Typical 8'W Piano
Typical 6'W Piano
6' access gate w/latch
Dock must be delivered in modular format in as large of sections that can be delivered on a flat-bed tractor and trailer. All dock and finger dock sections are to be completely assembled including decking, floats, side boards, bumpers, cleats, etc. Railing and gate for T-Head sections shall also be in modular format.
thunt
Line
File details come from the government source that posted it. Updated .