EI_69E49480G1_v1.pdf

This is an Engineering Data Requirements document (HILL AFB Form 462) for the manufacture of a Cable Assembly, Special Purpose, Electrical W5M (HRU 894/B), part number 69E49480G1 with National Stock Number 6150-004062752. The document was prepared by the Office Symbol 414 SCMS/GUEA at Hill Air Force Base on 19 November 2025. The document notes that military specifications and standards will not be furnished in the bid set.

The document includes two primary engineering changes: (1) a cataloging change updating the criticality code in SAW Form 761 from "X" to "M," tracked in JIRA as EO-6451; and (2) a design change to Drawing 69E49480, Sheet 1, which adds a requirement that connectors J2552B and P1002 shall have only between 2-4 threads on the screws showing past the clamp on the adapter (Find No. 3), with excess screw length removed using good shop practice or replaced with screws of equal specification and proper length. Both changes have been approved by engineering and the design authority. The document references an attached Engineering Data List (EDL) and part procurability information, with the detailed component requirements shown in a comprehensive table on the second page covering materials, specifications, and sourcing details for all assembly components.