NIIN 015048169 REV B - Fixed.pdf

PDF 254 KB Posted Feb 28, 2024

Attached to: Axle Assembly Federal contract opportunity
Solicitation number: SPRDL123R0147
Issued by: Defense Logistics Agency Land and Maritime

About this file

Written by GovTribe AI · Feb 28, 2024

This solicitation seeks proposals for an axle assembly requirements contract. The Defense Logistics Agency Land and Maritime is soliciting bids under solicitation number SPRDL123R0147 to establish a three year contract to meet its requirements for axle assemblies to support the FMTV A1/A1R/A1P2 end item. Bids are due by the date specified in the solicitation for a contract to provide axle assemblies to the agency on an as-needed basis over the subsequent three year period. The contract will have a ceiling amount determined by the agency's estimated needs for the item over that time frame.

View the file

Other files for this federal contract opportunity

Other files attached to Axle Assembly, newest first.
File	Type	Posted
SPRDL123R0147-0001.pdf	PDF	Mar 13, 2024
AK15048157.pdf	PDF	Feb 28, 2024
NIIN 015048154 Rev C.pdf	PDF	Feb 28, 2024
NIIN 015048155 - SPI Rev B.pdf	PDF	Feb 28, 2024
SPRDL123R0147.pdf	PDF	Feb 9, 2024

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Page 1 of 11 Pages

DD Form 2169, SEP 96 (Replica) Previous editions are obsolete

Form Approved -SS RJ OMB No. 0704-0188SPECIAL PACKAGING INSTRUCTION

4. NATIONAL STOCK NO. 6. REVISION

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE INDENT 3. SPI NO.

Public reporting burden for this collection of infromation is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completeing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directors for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please do not return your form to either of these addresses.

12422745 (19207) AXLE ASSEMBLY, FRONT DRIVE STEERING, ABS 19207 AK15048169

2520-01-504-8169

5. DATE OF DRAWING

8-2-2023 B

1 EA NONE 1784.5 71.121 101.0 X 36.0 X 33.8

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

18. 19. 20.

STEPS REQD DESCRIPTION

12. MILITARY PRESERVATION

MIL-STD-2073-1, METHOD 20

16. MARKING

MIL-STD-129 AND NOTE K

13. CLEANING

MIL-STD-2073-1

14. DRYING

MIL-STD-2073-1

15. PACKING

a. LEVEL A

MIL-STD-2073-1 AND NOTE L

b. LEVEL B

NOT APPLICABLE

17. NOTES/DRAWING

A. QUALITY ASSURANCE PROVISIONS:

INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT PACKING IN ACCORDANCE WITH

MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. REMOVE BRAKE DRUMS AND APPLY PRESERVATIVE TO ALL BARE METAL BRAKE COMPONENTS INCLUDING THE FINISHED SURFACE OF THE BRAKE DRUM. NOTE: INSTALL BRAKE DRUMS ON AXLE AFTER PRESERVATIVE HAS THROUGHLY DRIED.

C: FILL AXLE DIFFERENTIAL OPERATING LEVEL WITH OPERATING FLUID. ROTATE BRAKE DRUMS TO PROVIDE PROTECTION TO THE INTERNAL PARTS OF THE AXLE ASSEMBLY AND SEAL ALL OPENINGS. ATTACH A TAG TO EACH END OF AXLE STATING

"RESERVOIRS ARE FILLED WITH SAE J2360 GRADE 80W-90 OPERATING LUBRICANT".

D. APPLY PRESERVATIVE TO ALL UNPAINTED EXTERIOR SURFACES EXCEPT THE U-JOINT YOKE. APPLY PRESERVATIVE TO

UNPAINTED SURFACES OF BRACKET "C".

E. APPLY PRESERVATIVE THROUGH ALL GREASE FITTINGS. APPLY PRESERVATIVE TO UNPAINTED SURFACES OF THE U-JOINT YOKE INCLUDING THE THREADED HOLES. WRAP WITH MIL-PRF-121, TYPE II AND SECURE WITH TAPE.

NOTE: MANUFACTURER'S PLASTIC PROTECTIVE CAPS ARE ACCEPTABLE AS AN ALTERNATIVE TO THE USE OF WRAP.

F. PLUG OR CAP ALL OPEN PORTS. NOTE: MANUFACTURER'S PLUGS AND CAPS ARE ACCEPTABLE.

G. COMPLETELY WRAP EACH WHEEL STUD AND SECURE WITH TAPE.

NOTE: MANUFACTURES CAPS ARE ACCEPTABLE.

NOTE: PREPARE A TAG AS FOLLOWS: "STUDS HAVE BEEN PRESERVED WITH MIL-PRF-16173 GRADE 4 PRESERVATIVE. REMOVE PRIOR

TO USE". ATTACH TAG TO ONE OF THE WHEEL STUDS.

H. FABRICATE RUBBING STRIPS "A", BLOCKS "B", "D", AND BRACKETS "C" IN ACCORDANCE WITH CHART ON PAGE 2 AND FIGURE 1, FIGURE

2, FIGURE 3 AND FIGURE 4 ON PAGE 3.

I. NOTE "I" IS NOT USED.

1B PRESERVATIVE: A-A-52465.

2C PRESERVATIVE: SAE J2360 GRADE 80W-90.

3D PRESERVATIVE: MIL-PRF-16173, GRADE 4.

4E PRESERVATIVE: MIL-PRF-10924.

5F CLOSURE: NAS 847.

6G WRAP: MIL-PRF-121, TYPE II.

7H CUSHIONING AND BLOCKING: MIL-STD-1186.

8J 1 CONTAINER: ASTM-D6256 (MOD), STYLE A, TYPE II, CLASS 2,

SIZE 98-7/8 X 33-9/16 X 25.

Page 2 of 11 Pages

Form Approved -SS RJ OMB No. 0704-0188SPECIAL PACKAGING INSTRUCTION

4. NATIONAL STOCK NO. 6. REVISION

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE INDENT 3. SPI NO.

12422745 (19207) AXLE ASSEMBLY, FRONT DRIVE STEERING, ABS 19207 AK15048169

2520-01-504-8169

5. DATE OF DRAWING

8-2-2023 B

MIL-STD-731,

Lumber

(Nominal Size)

Pad or Block

Number

Critical Dimensions (Inches)

L W D

QTY

COMMENTS

A 4 X 4 29 4 FABRICATE IN ACCORDANCE WITH FIGURE 1 ON PAGE 3.

B SEE COMMENTS 2 FABRICATE IN ACCORDANCE WITH FIGURE 2 ON PAGE 3.

C BRACKET "C" 2 MATERIAL 3/8 1018 STEEL PLATE.

SEE COMMENTS FABRICATE IN ACCORDANCE WITH FIGURE 3 ON PAGE 3.

D SEE DIMENSIONS 33 - 1/2 4 - 1/4 3 - 1/2 2 FABRICATE IN ACCORDANCE WITH FIGURE 4 ON PAGE 3.

HARDWARE

NUMBER DESCRIPTION SIZE QTY COMMENTS

1 CARRIAGE BOLTS 3/8 INCH X 6 INCH 4

2 CARRIAGE BOLTS 3/8 INCH X 9 INCH 8

3 CARRIAGE BOLTS 1/2 INCH X 9 INCH 4

4 CARRIAGE BOLTS 3/8 INCH X 14 INCH 4

5 CARRIAGE BOLTS 1/2 INCH X 10 INCH 4

6 NUTS 3/8 INCH NC 16

7 NUTS 1/2 INCH NC 8

8 FLAT WASHERS 3/8 40

9 FLAT WASHERS 1/2 8

10 LOCKWASHERS 1/2 8

11 LOCKWASHERS 3/8 16

12 LAG BOLTS 3/8 INCH X 3 INCH 24

13 FLAT WASHERS 3/4 4

COMERCIAL QUALITY STEEL WITH COMERCIAL QUALITY

ZINC PLATING IS ACCEPTABLE.

LOOSENING OF THE INSTALLED NUTS, USED IN THE

SECURING OF BLOCKING AND BRACING, AND ON

ANCHOR BOLTS, SHALL BE PREVENTED BY EITHER

NICKING THE EXPOSED THREADS OF THE BOLTS;

APPLYING PAINT, ASPHALTUM OR MIL-PRF-16173,

GRADE 1 PRESERVATIVE.

Page 3 of 11 Pages

Form Approved -SS RJ OMB No. 0704-0188SPECIAL PACKAGING INSTRUCTION

4. NATIONAL STOCK NO. 6. REVISION

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE INDENT 3. SPI NO.

12422745 (19207) AXLE ASSEMBLY, FRONT DRIVE STEERING, ABS 19207 AK15048169

2520-01-504-8169

5. DATE OF DRAWING

8-2-2023 B

FIGURE 1 FIGURE 3

33-½

3-½

4-¼ 31-¾

1-¾

3 8/ DIA, 2 HOLES

1-¾

All dimensions are in inches.

All dimensions are actual.

All holes are dimensioned to center.

3 8/ DIA, 2 HOLE

2-½

26-½

23-½

1-¾

3-½

25-¼

31-¾

1-¾

½ DIA, 4 HOLES1-¾

8-½

4-¼

3-½

3 8/ 1018 STL PLATE

9 16/ DIA, 2 HOLES

3 8/ x 4-¾ x 2-½ Plate

1-¼ 2-½

12-¼

10-¼

6-¼ 6- /3 8

4-¾

REF5- /7 8 2- /15 16

¾ ¾ R

¾ R

¼ 1 - 2-½

FIGURE 2

FIGURE 4

Page 4 of 11 Pages

Form Approved -SS RJ OMB No. 0704-0188SPECIAL PACKAGING INSTRUCTION

4. NATIONAL STOCK NO. 6. REVISION

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE INDENT 3. SPI NO.

12422745 (19207) AXLE ASSEMBLY, FRONT DRIVE STEERING, ABS 19207 AK15048169

2520-01-504-8169

5. DATE OF DRAWING

8-2-2023 B

FIGURE 5

J. FABRICATE ASTM-D6256 BASE USING HARDWARE FROM CHART ON PAGE 2 AND AS SHOWN IN FIGURE 5 BELOW.

All dimensions are in inches.

All dimensions are actual.

See chart on page 2 for actual hardware sizes.

4 x 4 NOM

27-½

33-½

73-½

1-¾

31-¾

3/8 DIA HOLE THRU, 8 PLACES

4 PLACES

Page 5 of 11 Pages

Form Approved -SS RJ OMB No. 0704-0188SPECIAL PACKAGING INSTRUCTION

4. NATIONAL STOCK NO. 6. REVISION

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE INDENT 3. SPI NO.

12422745 (19207) AXLE ASSEMBLY, FRONT DRIVE STEERING, ABS 19207 AK15048169

2520-01-504-8169

5. DATE OF DRAWING

8-2-2023 B

FIGURE 6

NOTE "J" CONTINUED.

SECURE RUBBING STRIPS "A" TO SKID USING HARDWARE FROM CHART ON PAGE 2 AND AS SHOWN IN FIGURE 6 BELOW.

All dimensions are in inches.

All dimensions are actual.

See chart on page 2 for actual hardware sizes.

8 PLACES

70-½

Page 6 of 11 Pages

Form Approved -SS RJ OMB No. 0704-0188SPECIAL PACKAGING INSTRUCTION

4. NATIONAL STOCK NO. 6. REVISION

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE INDENT 3. SPI NO.

12422745 (19207) AXLE ASSEMBLY, FRONT DRIVE STEERING, ABS 19207 AK15048169

2520-01-504-8169

5. DATE OF DRAWING

8-2-2023 B

FIGURE 7

NOTE "J" CONTINUED.

PLACE BLOCKS "B" ON BASE AS SHOWN IN FIGURE 7 BELOW. TACK BLOCKS "B" IN PLACE AS SHOWN IN FIGURE 7 BELOW.

USING BLOCKS "B" AS A TEMPLATE, MATCH DRILL EIGHT (8) 1/2 INCH HOLES THROUGH BASE AS SHOWN IN FIGURE 7 BELOW.

SECURE BLOCKS "B" TO BASE USING HARDWARE FROM CHART ON PAGE 2 AND AS SHOWN IN FIGURE 7 BELOW.

All dimensions are in inches.

All dimensions are actual.

See chart on page 2 for actual hardware sizes.

4 PLACES

64-¾

Page 7 of 11 Pages

Form Approved -SS RJ OMB No. 0704-0188SPECIAL PACKAGING INSTRUCTION

4. NATIONAL STOCK NO. 6. REVISION

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE INDENT 3. SPI NO.

12422745 (19207) AXLE ASSEMBLY, FRONT DRIVE STEERING, ABS 19207 AK15048169

2520-01-504-8169

5. DATE OF DRAWING

8-2-2023 B

FIGURE 8

NOTE "J" CONTINUED.

PLACE BLOCKS "D" ON SKID AS SHOWN IN FIGURE 8 BELOW. TACK BLOCKS "D" IN PLACE AS SHOWN IN FIGURE 8 BELOW.

USING BLOCKS "D" AS A TEMPLATE, MATCH DRILL FOUR (4) 3/8 HOLES THROUGH SKID AND RUBBING STRIP "A" AS SHOWN IN

FIGURE 8 BELOW.

SECURE BLOCKS "D" TO SKID USING HARDWARE FROM CHART ON PAGE 2 AND AS SHOWN IN FIGURE 8 BELOW.

All dimensions are in inches.

All dimensions are actual.

See chart on page 2 for actual hardware sizes.

4 PLACES

21-½

79-½

Page 8 of 11 Pages

Form Approved -SS RJ OMB No. 0704-0188SPECIAL PACKAGING INSTRUCTION

4. NATIONAL STOCK NO. 6. REVISION

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE INDENT 3. SPI NO.

12422745 (19207) AXLE ASSEMBLY, FRONT DRIVE STEERING, ABS 19207 AK15048169

2520-01-504-8169

5. DATE OF DRAWING

8-2-2023 B

FIGURE 9

NOTE "J" CONTINUED.

INSERT FOUR (4) EACH CARRIAGE BOLTS (NUMBER 5) WITH FOUR (4) EACH FLATWASHERS (NUMBER 13) THROUGH MOUNTING HOLES IN

BLOCKS "B" AS SHOWN IN FIGURE 9 BELOW.

See chart on page 2 for actual hardware sizes.

4 PLACES

REF

Page 9 of 11 Pages

Form Approved -SS RJ OMB No. 0704-0188SPECIAL PACKAGING INSTRUCTION

4. NATIONAL STOCK NO. 5. DATE OF DRAWING 6. REVISION

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE INDENT 3. SPI NO.

12422745 (19207) AXLE ASSEMBLY, FRONT DRIVE STEERING, ABS 19207 AK15048169

2520-01-504-8169 08-13-2003 B

FIGURE 10

PLACE BARRIER MATERIAL MIL-PRF-121, TYPE II, SIZE 6 X 24, TWO (2) EACH, AROUND AXLE AND MOUNTING PADS AND SECURE WITH TAPE

AS SHOWN IN FIGURE 10 BELOW. NOTE: BOTH MOUNTING PADS SHOULD BE WRAPPED.

PLACE AXLE ON SKID AND CENTER ON BLOCKS "B" AS SHOWN IN FIGURE 10 BELOW AND IN FIGURE 11 ON PAGE 10.

PLACE BRACKETS "C" OVER MOUNTING PADS AND SECURE WITH HARDWARE FROM CHART ON PAGE 2 AND AS SHOWN IN FIGURE 10 BELOW

AND FIGURE 11 ON PAGE 10.

NOTE: NUTS FOR HOLD DOWN BRACKETS SHOULD BE TORQUED TO 70 FOOT POUNDS.

NOTE: THE BRACKET IS FABRICATED WITH AN ANGLE. THE 5 - 7/8 INCH SIDE OR THE SHORT SIDE OF THE BRACKET SHOULD BE

POSITIONED TO THE BACK SIDE OF AXLE (TOWARD THE TIE ROD).

WRAP

TYPICAL BOTH SIDES

See chart on page 2 for actual hardware sizes.

4 PLACES

Page 10 of 11 Pages

Form Approved -SS RJ OMB No. 0704-0188SPECIAL PACKAGING INSTRUCTION

4. NATIONAL STOCK NO. 5. DATE OF DRAWING 6. REVISION

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE INDENT 3. SPI NO.

12422745 (19207) AXLE ASSEMBLY, FRONT DRIVE STEERING, ABS 19207 AK15048169

2520-01-504-8169 08-13-2003 B

REF

FIGURE 11

Page 11 of 11 Pages

Form Approved -SS RJ OMB No. 0704-0188SPECIAL PACKAGING INSTRUCTION

4. NATIONAL STOCK NO. 5. DATE OF DRAWING 6. REVISION

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE INDENT 3. SPI NO.

12422745 (19207) AXLE ASSEMBLY, FRONT DRIVE STEERING, ABS 19207 AK15048169

2520-01-504-8169 08-13-2003 B

FOR CLOSURE OF HOOD USE

24 EACH LAG BOLTS (NUMBER 12) AND

24 EACH FLATWASHERS (NUMBER 8).

NOTE "J" CONTINUED.

FABRICATE ASTM-D6256 MODIFIED HOOD WITH JOIST SUPPORTS, VERTICAL JOIST SUPPORTS, AND LATERAL JOIST SUPPORTS USING NOMINAL 2 X 4 LUMBER COMFORMING TO MIL-STD-731. LOCATE CLEATS, JOIST SUPPORTS, AND VERTICAL JOIST SUPPORTS AS SHOWN IN FIGURE 12 BELOW. NOTE: CONTAINER SHALL CONSTRUCTED WITH VENTILATION HOLES, DRAIN HOLES, AND CORNER STRAPS AS

SPECIFIED BY ASTM-D6256.

PLACE HOOD ON SKID AND SECURE USING 24 EACH LAG BOLTS (NUMBER 12) AND 24 EACH FLATWASHERS (NUMBER 8).

K. MARK CONTAINER WITH 1 INCH LETTERS, ON BOTH SIDES AND ENDS:"REUSABLE CONTAINER DO NOT DESTROY.

CAUTION! LIFT BY BASE ONLY. TO OPEN, REMOVE BOTTOM LAG BOLTS".

L. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

37 61 85 101

3-½

26-¼

16-¼

All dimensions are in inches.

All dimensions are actual.

FIGURE 12

File details come from the government source that posted it. Updated Feb 28, 2024.