Revised_Questions_and_Answers_-_Amendment_0003_SPRBL1-18-R-0051_05-31-2018.pdf

QUESTIONS AND ANSWERS

SPRBL1-18-R-0051

Revised-May 31, 2018

Amendment 0003

Question-1:

Please provide part list of components that goes into the printed circuit board (PCB).

Please provide Gerber or Master pattern for the PCB.

Answer-1:

There is no parts list or master pattern for the PCB in the technical data package (TDP) for the battery compartment. The drawing included in the RDP are interface control drawings (ICDs), and the ICDs only specify the dimensions and requirements to interface with the AN/PSV-14 and its components. There are portions of the Battery Compartment are designed by the vendor given the interfaces are as required. For example, the electrical schematic can be unique to the vendor as long as the voltage and current outputs are correct and any interface dimensions are met.

Question-2:

Please provide a housing and subassembly dimensional drawing.

Answer-2:

There are no missing dimensions. The materials of the different components are specified in the notes and identified on the drawing. If necessary, they refer to a commercial standard or part number. The TDP has been used successfully in past acquisitions.

Question-3:

There does not appear to be enough information in the technical documentation to manufacture the item as described sub assembly A3297311. There is no electrical schematic and the electrical components are not identifies, such as the switch contacts led photo detectors etc.

Answer-3:

Refer to answer numbers 1 & 2 above. The TDP and specifications do not specify the electrical schematic, only the interface requirements.