SPRBL1-14-R-0031_0001.pdf

SOLICITATION, OFFER AND AWARD 1. This Contract Is A Rated Order Under

DPAS (15 CFR 700)

Rating Page of Pages

2. Contract Number 3. Solicitation Number 4. Type of Solicitation 5. Date Issued 6. Requisition/Purchase Number Sealed Bid (IFB)

Negotiated (RFP)

7. Issued By Code 8. Address Offer To (If Other Than Item 7)

NOTE: In sealed bid solicitations ‘offer’ and ‘offeror’ mean ‘bid’ and ‘bidder’.

SOLICITATION

9. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in item 8, or if handcarried, in the depository located in until (hour) local time (Date).

Caution - Late Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. For Information A. Name B. Telephone (No Collect Calls) C. E-mail Address

Call: Area Code Number Ext.

11. Table Of Contents

(X) Sec. Description Page(s) (X) Sec. Description Page(s)

Part I - The Schedule Part II - Contract Clauses A Solicitation/Contract Form I Contract Clauses

B Supplies or Services and Prices/Costs Part III - List Of Documents, Exhibits, And Other Attach.

C Description/Specs./Work Statement J List of Attachments D Packaging and Marking Part IV - Representations And Instructions E Inspection and Acceptance K Representations, Certifications, and F Deliveries or Performance Other Statements of Offerors G Contract Administration Data L Instrs., Conds., and Notices to Offerors H Special Contract Requirements M Evaluation Factors for Award

OFFER (Must be fully completed by offeror) NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

12. In compliance with the above, the undersigned agrees, if this offer is accepted within _____ calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. Discount For Prompt Payment 10 Calendar Days (%) 20 Calendar Days (%) 30 Calendar Days (%) Calendar Days (%) (See Section I, Clause No. 52.232-8)

14. Acknowledgment of Amendments (The offeror acknowledges Amendment No. Date Amendment No. Date receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

15A. Name and Code Facility 16. Name and Title of Person Authorized to Sign Offer Address of (Type or Print) Offeror

15B. Telephone Number 15C. Check if Remittance Address is 17. Signature 18. Offer Date Area Code Number Ext. Different From Above – Enter such

Address In Schedule

AWARD (To be completed by Government)

19. Accepted As To Items Numbered 20. Amount 21. Accounting And Appropriation

22. Authority For Using Other Than Full And Open Competition: 23. Submit Invoices To Address Shown In Item

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

24. Administered By (If other than Item 7) Code 25. Payment Will Be Made By Code

26. Name of Contracting Officer (Type or Print) 27. United States Of America 28. Award Date

(Signature of Contracting Officer)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION Standard Form 33 (Rev. 9-97) Previous edition is unusable Prescribed By GSA-FAR (48 CFR) 53.214(c)

SPRBL1-14-R-0031

X

2014AUG06

2014OCT0602:00pm

DOA7

2014AUG06 SEE SCHEDULE

SPRBL1

DLA LAND AT ABERDEEN

6001 COMBAT DRIVE ROOM C1-301

APG, MD 21005-1846

JACQUELYN R. DUNNE

(443)861-4533

DLA-ZL

JACQUELYN.R.DUNNE.CIV@MAIL.MIL

X 1 25

1 63

X 1

X 3 X 5

X 6 X 8 X 10

X 20

X 22

X 23

X 46

X 47

X 54

X 63

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

THE FOLLOWING AMENDMENTS HAVE BEEN INCORPORATED

Buyer Name: JACQUELYN R. DUNNE

Buyer Office Symbol/Telephone Number: DLA-ZL/(443)861-4533

Type of Contract: Fixed Price Incentive (Cost Based)

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

Solicitation number SPRBL1-14-R-0031 is hereby established. SPRBL1-14-R-0031 hereby replaces solicitation number SPMRAY-14-R-0001 which was used during the pre-solicitation phase on the Federal Business Opportunities website.

Concept.________

The Defense Logistics Agency (DLA) requires a material support contract for sole source Depot Level Repairable (DLRs) and consumables in support of Raytheon, Department of Defense (DOD) platforms.

The scope of this contract may grow to include additional phases of support, in out years. Future support may include, but is not limited to, depot level support and full platform support with repair actions and activities.

The establishment and execution of this DLA-Raytheon concept entails a world-wide support strategy that stresses speed and responsiveness in order to provide flexible, timely, and cost effective support to the end user. Additional phases may be later identified, negotiated and incorporated to accommodate continuous support solutions for sole source Raytheon platforms. A proposal will be requested from the offeror if additional support of this nature is required.

The government has a preference for material support on a Fixed-Price-Incentive (Firm Target) (FPIF) basis although the offeror is encouraged to propose an incentive structure that is mutually beneficial.

It is anticipated that the 64 sole source NSNs established herein will be definitized as FPIF CLINs. These CLINs will potentially have two incentives: cost and performance. Details regarding the governments preferred cost incentive structure are provided in Section L, Instructions, Conditions and Notices to Offerors. The government is seeking innovative solutions to reduce baseline lead time

(performance). The government supports the proposal of incentives for baseline lead time reduction. Cost and baseline lead time incentives are requested as a part of the offerors proposal and will be incorporated into the contract upon mutual agreement of the parties.

*** END OF NARRATIVE A0001 ***

1. The purpose of Amendment 0001 is to update the proposal submission date.

2. The proposal submission date provided in the SF33 and Section L of SPRBL1-14-R-0031 is hereby modified from 22 September 2014 to 06

October 2014.

3. No other changes are addressed in this solicitation amendment.

*** END OF NARRATIVE A0002 ***

2 63

REPRINT

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

Contract Type. The solicitation will result in the award of a three (3) year base and one (1) three (3) year option incentive based______________

Indefinite-Delivery Indefinite Quantity (IDIQ) contract.

Period of Performance. The anticipated Period of Performance (PoP) for this contract will begin with a base period of three years. The______________________ subsequent option period may be negotiated and awarded via bilateral agreement prior to the completion of the basic contract PoP.

Minimum Guarantee. In accordance with FAR 16.504(a)(1) a guaranteed minimum of $100,000 is hereby established for this IDIQ contract.__________________

Maximum Order Quantity. In accordance with FAR 16.501(a)(1) a maximum order quantity $495,600,000 is hereby established for this IDIQ_______________________ contract.

*** END OF NARRATIVE B0001 ***

3 63

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0001 NSN LISTING ___________

In accordance with the Statement of Work provided in

Section C a listing of Items (NSNs) and Best

Estimated Quantities (BEQs) are indentified in

Attachment 0001 - Schedule of Supplies, incorporated within Section J - List of Attachments.

Attachment 0001 provides the governments estimated

CLIN/SLIN structure. The offeror may adjust the current CLIN/SLINs detailed within the attachment.

The government did not provide separate SLINs to accomodate items that may require reusable shipping containers. If an items requires a reusable shipping container a SLIN may be added to allow the offeror to price the item to include the shipping container.

It is the governments preference that the Option period will not be evaluated at this time. It is the intention of the government to request a FPIF proposal from the offeror and enter into negotiations for the option period within the last 12 months of the basic contract period. This will allow sufficient time to establish realistic target pricing for the 36 month option period.

If the offeror provides a proposal with a contract type other than FPIF, and feels confident in pricing the option period, the offeror may provide pricing and a CLIN structure for the NSNs provided in

Attachment 0001.

(End of narrative B001)

4 63

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

Statement of Work (SOW).

1 Scope. The purpose of this contract is to provide Raytheon sole-source Depot Level Repairable (DLR) spares and sole-source consumables ______ including sole-source components in support of Raytheon-related platforms within the Department of Defense (DoD) that will significantly reduce baseline unit cost and lead time. A list of Raytheon supported sole-source systems and subsystems is provided herin at Attachment

0003.

This IDIQ will fulfill DoD and FMS customer requisitions. The list of Raytheon-supported sole-source systems, platforms and programs has been identified. It is our intention to evaluate and place as many Raytheon items belonging to these systems and platforms on contract as possible. Therefore, additional sole source items may be identified and added to this contract.

1.1 Period of Performance. This action will result in the award of a contract which is anticipated to be a six(6)-year IDIQ Type ______________________

Contract consisting of a three(3)-year base period and one(1) three(3)-year option period to be exercised at the discretion of the

Government (subject to the negotiation of option pricing).

1.2 Background. This acquisition will be conducted with Raytheon using Other than Full and Open Competition. This contract will ___________ consolidate existing requirements into one comprehensive contract in a manner that enhances effectiveness and reduces overall cost to the DoD. A message will be conveyed to all appropriate ordering activities that this contract has been established. Ordering activities will be provided the opportunity to independently place task orders on this contract to support their customers. This vehicle will avoid duplication or conflicting contractual instruments across the DoD. The result will achieve a decrease in the number of contracts awarded and administered, an increase in the availability and reliability of the parts supported, and a reduction to the cost of material supplied. This effort will enable one infrastructure managed by Raytheon, creating an arrangement that balances performance, risk, and cost.

2. Requirements. _____________

2.1 DLR Spares and Consumable Items. The contractor shall provide all necessary supplies, DLR spares and consumables. ________________________________

2.2 Reduce Baseline Unit Cost. The contractor shall work to reduce baseline unit cost. __________________________

2.3 Reduce Baseline Lead-Time. The contractor shall work to reduce baseline delivery lead-time. __________________________

2.4 Performance Review Meeting (PRMs). The contractor shall conduct informal semi-annual Performance Review exchanges at DLA Aberdeen or __________________________________ an alternate agreed to location. PRMs will be held to assess contractor performance, coordinate responses, and foster solutions to problems encountered during the contract period performance. The contractor shall present:

performance goals schedule progress risk mitigation

The status of reduction below the unit cost baseline

The status of the agreed to incentive arrangement

Proposed additions, deletions and transitions

*** END OF NARRATIVE C0001 ***

5 63

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION D - PACKAGING AND MARKING

Reusable Containers. The offeror shall perform an assessment to determine if DLRs contemplated within this contract utilize re-usable_____________________ containers. Raytheon shall make maximum use of reusable containers. Please note on Attachment 0001, Schedule of Supplies, which items require reusable containers.

*** END OF NARRATIVE D0001 ***

52.211-9036 PHYSICAL ITEM IDENTIFICATION/BARE ITEM MARKING DLA LAND AND MARITIME (NOV 2011)

Unless authorized by exclusions listed below, all items shall be marked as specified in military standard (MIL-STD) 130N. The following

DLA Land and Maritime supplemental marking requirements shall take precedence in case of conflict with MIL-STD-130N.

DLA Land and Maritime Exclusion:

(a) Unless the design control document specifically cites other marking requirements, the item will be considered too small to mark under the conditions listed below (however, 52.211-9035, Marking Requirements, applies):

(1) For federal supply classes (FSCs) 5905, 5910, 5935, 5961, 5962, and 5999, items smaller than .100 inch in diameter and .250 inch in length or .100 inch square X .250 inch in length, exclusive of wire leads, will not be marked.

(2) Other FSCs managed by DLA Land and Maritime will not be marked if the item is smaller than .250 inch in diameter X .500 inch long or

.250 inch square X .500 inch long, exclusive of wire leads.

(3) Restrictions (1) and (2) above will not preclude marking of items of smaller dimensions if it is the manufacturers or vendor's standard practice to do so.

(b) No other physical item marking exclusions are authorized unless specified by MIL-STD-130N.

(End of Clause)

*** END OF NARRATIVE D0002 ***

52.223-9003 MARKING DANGEROUS GOODS OR HAZARDOUS MATERIALS (NOV 2011)

(a) In the shipment of dangerous goods or hazardous materials, the Contractor shall mark outer containers and furnish information as requested by the government transportation office responsible for cargo movement. By shipping the materials, the Contractor warrants that the materials are properly classified, described, packaged, marked and labeled, and are in proper condition for transportation, according to the applicable regulations of the Department of Transportation (DOT).

(b) The Contractor shall identify hazardous materials as established in:

(1) DOT Hazardous Materials Regulations, Tariff Number BOE-6000, Parts 171-177.

(2) American National Standard for the Precautionary Labeling of Hazardous Industrial Chemicals, 2129.1-1976.

(c) The Contractor shall place all required markings, on outer shipping containers of hazardous materials in accordance with Code of

Federal Regulations (CFR) 49, Subpart D, of Part 172 and military standard (MIL-STD) 129P (also see Part 178, 49 CFR for DOT shipping containers and packaging specifications).

(d) The Contractor will insure that the following data is shown on shipping papers:

(1) Description of the dangerous goods article by the true shipping name as shown in the commodity list in 49 CFR 172.101. For export by water only, if shipping is named in a not otherwise specified (N.O.S.) entry, further identification by clear text chemical name is required to be shown in parentheses.

(2) Classification of the item as prescribed in 49 CFR 172.101.

(3) Total quantity by weight, volume, or as otherwise appropriate. For transportation by water, see 49 CFR 172.203(i).

(4) For water shipments only, show name of shipper.

(5) DOT hazard identification numbers (UN or NA) on appropriate shipping documents and Government Bill of Lading. The UN or NA numbers can be found in Sections 172.101, Column 3A or Section 172.102, Column 4 of 49 CFR Parts 100-177. For tank shipments having a capacity of more than 110 gallons, on panels or placards as specified in Section 172.332 of 49 CFR Parts 100-177.

(e) Air Shipments:

(1) For commercial air shipments, the Contractor shall complete the International Air Transport Association Shippers Declaration for

Dangerous Goods form and present it with the shipment to the carrier.

(2) For military air shipments (including military contract airlift), the Contractor shall use a Shippers Declaration for Dangerous

Goods (MISC PUB 55-3) or local form to certify dangerous goods or hazardous material moving and affix it to outer shipping containers in accordance with military standard (MIL-STD) 129P and Air Force Manual 24-204I (Latest Revision).

(End of Clause)

*** END OF NARRATIVE D0003 ***

52.246-9062 REPACKAGING TO CORRECT PACKAGING DEFICIENCIES (SEP 2008)

(a) Notwithstanding inspection and acceptance by the Government of supplies furnished under this contract, or any condition of this contract concerning the conclusiveness thereof, the Contractor guarantees that the preservation, packaging, packing and marking (PPP&M), and the preparation of, and method of shipment of such supplies will conform with the requirements of this contract.

6 63

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(b) The Government may at the option of the Contracting Officer, correct PPP&M deficiencies, without prior Contractor notification, and require an equitable adjustment in the contract price to cover labor and material when the actual corrective costs are less than $300.

(c) If the Contractor furnishes supplies under a simplified acquisition that are not in conformance with the PPP&M requirements of the award, such action shall not be deemed a counter offer but shall be deemed an acceptance by the vendor of the terms of the Government's offer as set forth in the purchase order.

(End of Clause)

*** END OF NARRATIVE D0004 ***

52.247-9012 REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM) (FEB 2007)

(a) This clause only applies when wood packaging material (WPM) will be used to make shipments under this contract and/or when WPM is being acquired under this contract.

(b) Definition.

Wood packaging material (WPM) means wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. The definition excludes materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD).

(c) All wood packaging material (WPM) used to make shipments under Department of Defense (DOD) contracts and/or acquired by DOD must meet requirements of international standards for phytosanitary measures (ISPM) 15, Guidelines for Regulating Wood Packaging Materials in

International Trade. DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo.

(1) All WPM shall comply with the official quality control program for heat treatment (HT) or kiln dried heat treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) wood packaging material program and WPM enforcement regulations

(see http://www.alsc.org/).

(2) All WPM shall include certification/quality markings in accordance with the ALSC standard. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible. All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ALSC approved dunnage stamp.

(d) Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government."

(End of Clause)

*** END OF NARRATIVE D0005 ***

7 63

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION E - INSPECTION AND ACCEPTANCE

This document incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at these addresses:

http://farsite.hill.af.mil/VFFARA.HTM or http://farsite.hill.af.mil/VFDFARA.HTM or http://farsite.hill.af.mil/VFAFARa.HTM

If the clause requires additional or unique information, then that information is provided immediately after the clause title.

Regulatory Cite Title Date Regulatory Cite Title Date _______________ ______________________________________________________________________ ____________ _______________ ______________________________________________________________________ ____________

E-1 52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996) -- ALTERNATE I (JUL JUL/1985

1985)

E-2 52.246-16 RESPONSIBILITY FOR SUPPLIES APR/1984

52.246-9065 PROTECTION FROM DEGRADATION DUE TO ELECTROSTATIC/ELECTROMAGNETIC FORCES (NOV 2011)

(a) This clause applies when the items being acquired are sensitive electronic devices. All items subject to degradation from electrostatic/electromagnetic (ES/EM) environmental field forces, including those having a military standard (MIL-STD) 2073-1 preservation method code of GX, shall be handled and packaged at an approved field force protective work station.

(b) If the preservation method code in the solicitation does not specify ES/EM protection and the Offerors proposed item of supply is subject to degradation from ES/EM environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.

(c) Failure to provide required packaging data for offered items of supply which are subject to degradation from ES/EM environmental field forces may result in the offer not being considered for award.

(End of Clause)

*** END OF NARRATIVE E0001 ***

52.246-9008 INSPECTION AND ACCEPTANCE AT ORIGIN (NOV 2011)

(a) Inspection and acceptance are at origin.

(b) The point of acceptance will be the point of last inspection before shipment unless otherwise indicated by the offeror.

(c) The Offeror shall indicate below the location where supplies will be inspected:

Supplies:

Plant: ___________________________________

Commercial and Government entity (CAGE) code:__________________

Street: __________________________________

City/State/Zip: ______________________________

Applicable to contract line-item numbers(s) (CLIN(s)): __________________________________

(d) The Offeror shall indicate below the location where packaging will be inspected:

Packaging:

( ) Same as for supplies or, Plant: __________________________________ CAGE Code: ___________________

Street: _________________________________

City/State/Zip: _____________________________

Applicable to CLIN(s): ___________________________________________________

(e) For CLIN(s) described by manufacturer's name/code and part number:

(1) Contractor must present evidence of performance of all quality assurance requirements specified in the contract and ensure that item will serve its intended purpose by performing examinations and tests to determine (A) completeness of item, (B) absence of rust, contamination, or deterioration, (C) correct identification, (D) absence of any damage, and (E) compliance with preparation for delivery. If the Contractor is not the manufacturer of the supplies, evidence must be furnished to establish that the supplies were produced by the manufacturer.

(2) The word "manufacturer" means the actual manufacturer of each CLIN. The Governments Quality Assurance Representative may require that evidence be furnished establishing the name and address of the plant that manufactures each CLIN to ensure that a domestic product is being supplied.

(f) For CLIN(S) designated as former Government surplus (whether described by manufacturers name/code and part number, or by Military or

Federal specification or drawing), the original package markings of each item shall be verified to previous Government contract number and part number (as specified in Defense Logistics Acquisition Directive (DLAD) 52.211-9000, Section I of the award). Any deviation from this number shall be cause for rejection of the item.

(g) Additional inspection requirements may be required, based on the evaluation of the surplus offer, by the procuring activity. Such additional requirements, if necessary, will be identified before the award.

8 63

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(End of Clause)

*** END OF NARRATIVE E0003 ***

9 63

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION F - DELIVERIES OR PERFORMANCE

This document incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at these addresses:

http://farsite.hill.af.mil/VFFARA.HTM or http://farsite.hill.af.mil/VFDFARA.HTM or http://farsite.hill.af.mil/VFAFARa.HTM

If the clause requires additional or unique information, then that information is provided immediately after the clause title.

Regulatory Cite Title Date Regulatory Cite Title Date _______________ ______________________________________________________________________ ____________ _______________ ______________________________________________________________________ ____________

F-1 52.211-17 DELIVERY OF EXCESS QUANTITIES SEP/1989

F-2 52.242-15 STOP-WORK ORDER AUG/1989

F-3 52.242-17 GOVERNMENT DELAY OF WORK APR/1984

F-4 52.247-29 F.O.B. ORIGIN FEB/2006

F-5 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION DEC/2013

(a) Definitions. As used in this clause

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards

Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

"Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

"Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Governments unit acquisition cost" means

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractors estimated fully burdened unit cost to the

Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractors estimated fully burdened unit cost to the Government at the time of delivery.

10 63

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise (e.g., Dun &

Bradstreet's Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, Allied Committee 135 NATO Commercial and Government

Entity (NCAGE)/Commercial and Government Entity (CAGE) Code, or the Coded Representation of the North American Telecommunications

Industry Manufacturers, Suppliers, and Related Service Companies (ATIS-0322000) Number), European Health Industry Business Communication

Council (EHIBCC) and Health Industry Business Communication Council (HIBCC)), as indicated in the Register of Issuing Agency Codes for

ISO/IEC 15459, located at http://www.nen.nl/web/Normen-ontwikkelen/ISOIEC-15459-Issuing-Agency-Codes.htm.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

"Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more.

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

Items may be identified at the Task Order level but have not been identified from the list provided with the basic contract.

11 63

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in

Attachment Number -5-.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in

Attachment Number -6-.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC

International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI

MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International

Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2

Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air

Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer

Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of

U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of

MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code--

12 63

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and

Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material

Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Governments unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material

Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

13 63

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at

252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods--

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number -7-, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by contract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

(End of clause)

F-6 252.211-7006 PASSIVE RADIO FREQUENCY IDENTIFICATION SEP/2011

(a) Definitions. As used in this clause--

"Advance shipment notice" means an electronic notification used to list the contents of a shipment of goods as well as additional information relating to the shipment, such as passive radio frequency dentification (RFID) or item unique identification (IUID) information, order information, product description, physical characteristics, type of packaging, marking, carrier information, and configuration of goods within the transportation equipment.

"Bulk commodities" means the following commodities, when shipped in rail tank cars, tanker trucks, trailers, other bulk wheeled conveyances, or pipelines:

(1) Sand.

(2) Gravel.

(3) Bulk liquids (water, chemicals, or petroleum products).

(4) Ready-mix concrete or similar construction materials.

(5) Coal or combustibles such as firewood.

(6) Agricultural products such as seeds, grains, or animal feed.

"Case" means either a MIL-STD-129 defined exterior container within a palletized unit load or a MIL-STD-129 defined individual shipping container.

"Electronic Product Code\TM\ (EPC)" means an identification scheme for universally identifying physical objects via RFID tags and other means. The standardized EPC\TM\ data consists of an EPC\TM\ (or EPC\TM\ identifier) that uniquely identifies an individual object, as well as an optional filter value when judged to be necessary to enable effective and efficient reading of the EPC\TM\ tags. In addition to this standardized data, certain classes of EPC\TM\ tags will allow user-defined data. The EPC\TM\ Tag Data Standards will define the length and position of this data, without defining its content.

"EPCglobal" means a subscriber-driven organization comprised of industry leaders and organizations focused on creating global standards for the adoption of passive RFID technology.

"Exterior container" means a MIL-STD-129 defined container, bundle, or assembly that is sufficient by reason of material, design, and construction to protect unit packs and intermediate containers and their contents during shipment and storage. It can be a unit pack or a container with a combination of unit packs or intermediate containers. An exterior container may or may not be used as a shipping container.

"Palletized unit load" means a MIL-STD-129 defined quantity of items, packed or unpacked, arranged on a pallet in a specified manner and secured, strapped, or fastened on the pallet so that the whole palletized load is handled as a single unit. A palletized or skidded load is not considered to be a shipping container. A loaded 463L System pallet is not considered to be a palletized unit load. Refer to the

Defense Transportation Regulation, DoD 4500.9-R, Part II, Chapter 203, for marking of 463L System pallets.

14 63

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

"Passive RFID tag" means a tag that reflects energy from the reader/interrogator or that receives and temporarily stores a small amount of energy from the reader/interrogator signal in order to generate the tag response. The only acceptable tags are EPC Class 1 passive

RFID tags that meet the EPCglobal\TM\ Class 1 Generation 2 standard.

"Radio frequency identification (RFID)" means an automatic identification and data capture technology comprising one or more reader/interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers.

"Shipping container" means a MIL-STD-129 defined exterior container that meets carrier regulations and is of sufficient strength, by reason of material, design, and construction, to be shipped safely without further packing (e.g., wooden boxes or crates, fiber and metal drums, and corrugated and solid fiberboard boxes).

(b)(1) Except as provided in paragraph (b)(2) of this clause, the Contractor shall affix passive RFID tags, at the case- and palletized-unit-load packaging levels, for shipments of items that--

(i) Are in any of the following classes of supply, as defined in DoD 4140.1-R, DoD Supply Chain Materiel Management Regulation, AP1.1.11:

(A) Subclass of Class I--Packaged operational rations.

(B) Class II--Clothing, individual equipment, tentage, organizational tool kits, hand tools, and administrative and housekeeping supplies and equipment.

(C) Class IIIP--Packaged petroleum, lubricants, oils, preservatives, chemicals, and additives.

(D) Class IV--Construction and barrier materials.

(E) Class VI--Personal demand items (non-military sales items).

(F) Subclass of Class VIII--Medical materials (excluding pharmaceuticals, biologicals, and reagents--suppliers should limit the mixing of excluded and non-excluded materials).

(G) Class IX--Repair parts and components including kits, assemblies and subassemblies, reparable and consumable items required for maintenance support of all equipment, excluding medical-peculiar repair parts; and

(ii) Are being shipped to one of the locations listed at http://www.acq.osd.mil/log/rfid/ or to--

(A) A location outside the contiguous United States when the shipment has been assigned Transportation Priority 1, or to--

(B) The following location(s) deemed necessary by the requiring activity:

Contract line, subline, or exhibit Location name City State DoDAAC line item number

Locations have not been specified in the basi contract but may be specified at the task order level.

(2) The following are excluded from the requirements of paragraph (b)(1) of this clause:

(i) Shipments of bulk commodities.

(ii) Shipments to locations other than Defense Distribution Depots when the contract includes the clause at FAR 52.213-1, Fast

Payment Procedures.

(c) The Contractor shall--

(1) Ensure that the data encoded on each passive RFID tag are globally unique (i.e., the tag ID is never repeated across two or more

RFID tags) and conforms to the requirements in paragraph (d) of this clause;

(2) Use passive tags that are readable; and

(3) Ensure that the passive tag is affixed at the appropriate location on the specific level of packaging, in accordance with MIL-STD-

129 (Section 4.9.2) tag placement specifications.

15 63

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(d) Data syntax and standards. The Contractor shall encode an approved RFID tag using the instructions provided in the EPC\TM\ Tag Data

Standards in effect at the time of contract award. The EPC\TM\ Tag Data Standards are available at http://www.epcglobalinc.org/standards/.

(1) If the Contractor is an EPCglobal\TM\ subscriber and possesses a unique EPC\TM\ company prefix, the Contractor may use any of the identifiers and encoding instructions described in the most recent EPC\TM\ Tag Data Standards document to encode tags.

(2) If the Contractor chooses to employ the DoD identifier, the Contractor shall use its previously assigned Commercial and Government

Entity (CAGE) code and shall encode the tags in accordance with the tag identifier details located at http://www.acq.osd.mil/log/rfid/tag_data.htm. If the Contractor uses a third-party packaging house to encode its tags, the CAGE code of the third-party packaging house is acceptable.

(3) Regardless of the selected encoding scheme, the Contractor with which the Department holds the contract is responsible for ensuring that the tag ID encoded on each passive RFID tag is globally unique, per the requirements in paragraph (c)(1) of this clause.

(e) Advance shipment notice. The Contractor shall use Wide Area WorkFlow (WAWF), as required by DFARS 252.232-7003, Electronic

Submission of Payment Requests, to electronically submit advance shipment notice(s) with the RFID tag ID(s) (specified in paragraph (d) of this clause) in advance of the shipment in accordance with the procedures at https://wawf.eb.mil/.

(End of clause)

52.211-9010 SHIPPING LABEL REQUIREMENTS MILITARY STANDARD (MIL-STD) 129P (APR 2014)

(a) MIL-STD-129, revision P, current version, establishes requirements for Contractors that ship packaged materiel to the Government to provide both linear bar codes and two-dimensional (2D) symbols on shipping labels (but see paragraph (d) for exceptions to the requirement for 2D symbols). Shipping labels with 2D symbols are referred to as military shipping labels (MSL). See the Defense

Logistics Agency (DLA) packaging web site identified in paragraph (e) for change notices to MIL-STD-129P that apply. Linear (code 3 of 9 or code 39) bar codes continue to be required on interior packages (unit packs and intermediate packages) for the national stock number

(NSN) and, when applicable, the serial number(s); and on exterior shipping containers and palletized unit loads for the NSN, commercial and Government entity (CAGE) code, contract number and, when applicable, the serial number(s). This data is also required to be linear bar-coded on the Department of Defense (DD) form 250.

(b) The shipping label described in this clause replaces former DD form 1387 and is illustrated in Figures 2a and 2b of MIL-STD-129P.

(1) The shipping label requires code 3 of 9 or code 39 linear bar codes for the transportation control number (TCN), piece number and

DOD activity address code (DoDAAC) for the…