SPMYM327Q2008 Exhibit A.pdf
PDF 234 KB Posted
- Attached to
- CAPSCREWS
- Solicitation number
- SPMYM327Q2008
About this file
This is a Contract Data Requirements List (DD Form 1423) for contract SPMYM327Q2008 concerning cap screws, establishing mandatory documentation and certification deliverables that the contractor must provide.
The contract requires two data submission sequences. Sequence A001 mandates a Certificate of Compliance (DID: DI-MISC-81356A) referencing contract paragraph C.4.1, with technical content aligned to specific contract line items. This one-time submission must accompany the material delivery and requires three copies distributed to code 133.2. Sequence A002 requires Material Certification (DID: DI-MISC-80678) per contract paragraph C.4.2, also a one-time submission in triplicate. The material certification must contain actual quantitative test results for all chemical and mechanical tests specified, with results in units required by the specification. Fastener certification must demonstrate testing of the correct number of specimens using new, untested fasteners for wedge tensile and yield strength testing. Additional requirements include compliance with the contract's "Marking and Certification Requirements for Controlled Industrial Material" section. All data submissions must reference the respective contract line items, be submitted under separate shipment numbers, and comply with payment and submission clauses 252.232-7006, 252.232-7003, or 52.232-36. Technical office responsibility is assigned to code 136.2, with review authority at code 245.2 as of November 4, 2020.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPMYM327Q2008 RFQ.docx | DOCX document | |
| SPMYM327Q2008 Attachment-3.pdf | ||
| SPMYM327Q2008 Exhibit C.pdf | ||
| SPMYM327Q2008 Attachment-2.pdf | ||
| SPMYM327Q2008 Combined Synopsis Solicitation.docx | DOCX document | |
| SPMYM327Q2008 Exhibit B.pdf | ||
| SPMYM327Q2008 Attachment-1.pdf | ||
| Clauses - Full Text Provisions and Clauses 8-28-2026.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
5305 1FA EXHIBIT A
SYSTEM/ITEM SCREW, CAP
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 11/04/2020
CONTRACT DATA REQUIREMENTS LIST
01 SEQ NO A001
02 DATA DESC CERTIFICATION DATA/REPORTS
03 SUBTITLE CERT. OF COMPLIANCE
04 DID NUMBER DI-MISC-81356A
05 CONTRACT REF PARA. C.4.1
06 TECH OFFICE 136.2
07 DD 250 REQ DD
08 APP CODE
10 FREQUENCY 1-TIME
11 AS OF DATE
12 DATE 1ST SUBM WITH MATERIAL
13 DATE SUB SUBM
14 DISTRIBUTION 133.2
15 TOTAL 3
16 REMARKS 1.TECHNICAL CONTENT AS DESCRIBED IN THE RESPECTIVE CONTRACT LINE ITEM(S).
2.FOR PAYMENT & SUBMISSION OF DATA REFER TO CLAUSES 252.232-7006 & 252.232-
7003 OR 52.232-36. EACH DATA ITEM SUBMITTED BY VENDOR MUST BE SUBMITTED
UNDER A SEPARATE SHIPMENT NUMBER.
SEQ. NO. A001
PREPARED BY
APPROVED BY
DATE
DATE
DD FORM 1423
09 IAC INPUT
/2 0
Reviewed by:
Code: 245.2 Date: 11/4/2020
SPMYM327Q2008
5305 1FA EXHIBIT
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 11/04/2020
CONTRACT DATA REQUIREMENTS LIST
01 SEQ NO A002
02 DATA DESC MATERIAL CERTIFICATION
03 SUBTITLE CERTIFICATION/DATA REPORT
04 DID NUMBER DI-MISC-80678
05 CONTRACT REF PARA C.4.2
06 TECH OFFICE 136.2
07 DD 250 REQ
08 APP CODE
10 FREQUENCY 1-TIME
11 AS OF DATE
12 DATE 1ST SUBM
13 DATE SUB SUBM
14 DISTRIBUTION 133.2
15 TOTAL 3
16 REMARKS BLOCK 4 1.)PARAGRAPHS 10.2.2, 10.2.3 & 10.4 OF DI-MISC-80678 DO NOT APPLY.
2.)TECHNICAL CONTENT AS DESCRIBED IN THE RESPECTIVE CONTRACT LINE ITEM(S).
3.)THIS CERTIFICATION SHALL CONTAIN THE ACTUAL TEST RESULTS OF ALL CHEMICAL
& MECHANICAL TEST(S) REQUIRED BY THE SPECIFICATION
4.)THE TEST RESULT(S) SHALL BE QUANTITATIVE & IN THE UNITS REQUIRED BY THE
SPECIFICATION.
5.)FOR PAYMENT & SUBMISSION OF DATA REFER TO CLAUSES 252.232-7006 & 252.232-
7003 OR 52.232-36. EACH DATA ITEM SUBMITTED BY VENDOR MUST BE SUBMITTED
UNDER A SEPARATE SHIPMENT NUMBER.
6.)IN ADDITION TO THE CERTIFICATION DATA REQUIREMENTS SPECIFIED IN DI-MISC-
80678, THE REQUIREMENTS OF THE CONTRACT SECTION TITLED, “MARKING AND
CERTIFICATION REQUIREMENTS FOR CONTROLLED INDUSTRIAL MATERIAL” APPLY.
7.)FASTENER CERTIFICATION SHALL SHOW EVIDENCE OF TESTING OF THE CORRECT
NUMBER OF SPECIMENS, NEW UNTESTED FASTENERS ARE REQUIRED FOR EACH
TEST WHERE WEDGE TENSILE TESTING AND YIELD STRENGTH TESTING ARE
REQUIRED.
SEQ. NO. A002
PREPARED BY DATE
09 IAC INPUT
/1
SPMYM327Q2008
A
5305 1FA EXHIBIT
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 11/04/2020
CONTRACT DATA REQUIREMENTS LIST
APPROVED BY DATE
DD FORM 1423
SPMYM327Q2008
A
File details come from the government source that posted it. Updated .