SPMYM327Q2008 Attachment-1.pdf
PDF 269 KB Posted
- Attached to
- CAPSCREWS
- Solicitation number
- SPMYM327Q2008
About this file
This document is a contract attachment specification for the manufacture and delivery of self-locking cap screws. The contract number is SPMYM327008, dated November 4, 2020, with item number 0001 under CMMC Level 1 requirements.
The deliverable is cap screws, self-locking, nickel copper aluminum (K-Monel), Type IV, conforming to Federal Specification FF-S-86E and Military Standard Drawing MS18116. Specifications require 0.500"-13UNC-3A threads by 1.375" length, with classification "L" or "P" per MIL-DTL-18240F(1). The fasteners must feature a hexagon socket with flat countersunk head at 82 degrees, manufactured from QQ-N-286G material (either Form 1 requiring solution annealing after heading and threading followed by age hardening, or Form 2 with threads cut or ground only). The cap screw head must display a minimum of six raised or depressed dots approximately 0.032 inches in diameter. Protective coating is not required, and cross drilling of the head is not required. The stock number is 5305-LL-DM1-2006 with SMIC code 5F. Data requirements include certification of compliance for cap screws 1/2" diameter and larger (Exhibit A, Sequence A001) and certification of material/data (Exhibit A, Sequence A002). Additional requirements include C524 marking and certification for controlled industrial material, C500 mercury control compliance, and C531 restrictions on K-Monel material. Preservation and packaging must comply with D4 and D5 fastener packaging requirements, with inspection and acceptance at destination per E2 and notice of constructive acceptance period per E504.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPMYM327Q2008 RFQ.docx | DOCX document | |
| SPMYM327Q2008 Attachment-3.pdf | ||
| SPMYM327Q2008 Exhibit A.pdf | ||
| SPMYM327Q2008 Exhibit C.pdf | ||
| SPMYM327Q2008 Attachment-2.pdf | ||
| SPMYM327Q2008 Combined Synopsis Solicitation.docx | DOCX document | |
| SPMYM327Q2008 Exhibit B.pdf | ||
| Clauses - Full Text Provisions and Clauses 8-28-2026.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT
PRINTED 11/04/2020 ATTACHMENT PAGE
5305 1FA
C DESCRIPTION/SPECIFICATIONS
C.1 MANUFACTURE CAP SCREWS IN ACCORDANCE WITH FED-SPEC. FF-S-86E
AND MIL-STD DRAWING MS18116. PARAGRAPH 6.2 (ORDERING DATA):
(A) "SCREW, CAP, SOCKET-HEAD", FF-S-86E OF MAY 29, 1987 AND
NOTICE 2 OF 22 FEB 02.
(B) TYPE IV (HEXAGON SOCKET, FLAT COUNTERSUNK HEAD, 82 DEG. ANGLE)
NICUAL. SIZE AN LENGTH AS SPECIFIED IN SECTION B OF THIS
SCHEDULE.
(C) MILITARY STANDARD (PART NUMBER) NOT APPLICABLE.
(D) MATERIAL TO BE NICKEL COPPER ALUMINUM IN ACCORDANCE WITH
QQ-N-286G, HOT FINISHED OR COLD DRAWN, ANNEALED AND AGE HARDENED.
FASTENERS MADE FROM QQ-N-286G FORM 1 MATERIAL SHALL BE SOLUTION ANNEALED
SUBSEQUENT TO HEADING AND THREADING, AND THEN AGE HARDENED. FASTENERS MADE FROM
QQ-N-286G FORM 2 MATERIAL SHALL HAVE THREADS CUT OR GROUND ONLY.
MATERIAL CERTIFICATION AS REQUIRED PER PARA. C.4.2 OF THIS
SCHEDULE.
NOTE: ONE HEAT IS REQUIRED FOR QUANTITIES OF 50 AND UNDER.
(E) PROTECTIVE COATING NOT REQUIRED.
(F) CROSS DRILLING OF HEAD NOT REQUIRED.
(G) THREAD SERIES AND CLASS OF FIT TO BE AS SPECIFIED IN SECTION
B OF THIS SCHEDULE.
C.2 SELF LOCKING ELEMENT SHALL BE IN ACCORDANCE WITH MIL-DTL-18240F(1) .
CLASSIFICATION TYPE SHALL BE AS SPECIFIED IN SECT. B OF THIS
SCHEDULE.
C.3 A MINIMUM OF SIX (6) DOTS APPROXIMATELY .032 INCHES IN DIAMETER
RAISED OR DEPRESSED APPROXIMATELY .010 INCHES ARE TO BE PLACED
ON THE HEAD OF THE FASTENER. (TOP PREFERRED OR SIDE LOCATION IF
NECESSARY DUE TO CONFIGURATION.)
C.4 DATA REQUIREMENTS:
C.4.1 CERT. OF COMPLIANCE., SEE EXHIBIT A, SEQUENCE A001
(APPLIES TO CAP SCREWS 1/2" DIAMETER AND LARGER ONLY)
C.4.2 CERT. OF MATERIAL/DATA., SEE EXHIBIT A, SEQUENCE A002
C.5 C524 MARKING & CERTIFICATION REQMNTS FOR CONTROLLED INDUSTRL MATL
(APPLIES TO CAP SCREWS 1/2" DIAMETER AND LARGER ONLY)
C.6 C500 MERCURY CONTROL (SUPPLIES)
ITEM NO.
STOCK NUMBER
5305-LL-DM1-2006
SPECIAL CHARACTERISTICS
0.500"-13UNC-3A X 1.375" LONG
CLASSIFICATION "L" OR "P"
ITEM NAME CAP SCREW, SLFLKG, NICUAL(K-MONEL), TYPE IV, FF-S-86E
SECTION B
SMIC
5F
SPMYM327008
1 1 michael.cruver
LEVEL 1
CONTRACT
PRINTED 11/04/2020 ATTACHMENT PAGE
5305 1FA
C.7 C531 RESTRICTIONS ON K-MONEL MATERIAL
D PRESERVATION/PACKAGING/PACKING
D.1 D4 PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)
D.2 D5 FASTENER PACKAGING REQUIREMENTS
E INSPECTION ACCEPTANCE
E.1 E1 RESPONSIBILITY FOR INSPECTION
E.2 E2 INSPECTION AND ACCEPTANCE (DESTINATION)
E.3 E504 NOTICE OF CONSTRUCTIVE ACCEPTANCE PERIOD
H SPECIAL PROVISIONS
K Section
L Section
M Section
Reviewed by:
Code:245.2 Date: 11/4/2020
SPMYM327Q2008
File details come from the government source that posted it. Updated .