SPMYM327Q2008 Attachment-3.pdf

This is an Attachment 3 to a federal contract specification document (FSC 5305) for a commercial item procurement under contract SPMYM327Q2008.

The document specifies procurement requirements for a Hex Head Self-Locking Capscrew (Stock Number: 5305-LL-D00-0280). The capscrew must comply with MIL-DTL-1222J, TYPE I, self-locking IAW MIL-DTL-18240F(1)(MOD), and meet NICU QQ-N-281D(2) CLASS A specifications at 1.500-6UNC-2A X 7.500. The modification to MIL-DTL-18240F(1) requires the center line of the pellet to be 1.500 inches from the end of the bolt, with a pellet diameter of 0.281 inches, finished overall diameter of 1.502 inches (+0.000/-0.010), maximum hole depth of 0.281 inches, hole diameter of 0.279 inches (+0.000/-0.0045), and minimum breakaway torque of 90 in-lb. The beginning of thread is to be modified per Figure 1, which depicts a thread profile with filing requirements. The contract incorporates PNS Standard FAR clauses including C500 (Mercury Exclusion) and C524 (Marking & Certification Requirements), standard commercial packaging practices, contractor inspection requirements under FAR 52.246-1, inspection and acceptance at destination provisions, and standard clause H500 for threaded products. The item is designated as CMMC Level 1 and classified as non-Level-1 material.