SPMYM326Q4055 Spring Hatch SOC 61324001.pdf
PDF 8 MB Posted
- Attached to
- Spring Hatch SOC
- Solicitation number
- SPMYM326Q4055
About this file
This is a Solicitation/Contract/Order for Commercial Products and Commercial Services (Standard Form 1449) issued by the Defense Logistics Agency (DLA), Portsmouth Naval Shipyard Contracting Division (DLA-KME), Portsmouth, New Hampshire.
The solicitation procures Spring Hatch components and associated data requirements across four line items with firm fixed pricing. Item 0001 and 0003 are individual Spring Hatch units in accordance with Technical Data Packages (TDP PNTDP0165 VER 001 and TDP PNTDP0166) with internal numbers 61324001 and 61324011 respectively; Items 0002 and 0004 are data requirement sets referenced to Exhibits A and B. All items are to be delivered to Portsmouth Naval Shipyard GF Receiving Officer, Building 170, Kittery, Maine 03904-5000 within 180 calendar days from the date of award. The solicitation number is SPMYM326Q4055, with an estimated inspection time of 180 days at destination. Inspection will occur at DCMA Naval Special Emphasis Ops, Philadelphia, Pennsylvania, and acceptance will be at the receiving location. The contract incorporates FAR and DFARS clauses by reference, including requirements for higher-level contract quality standards (MIL-I-45208 or ISO 9001:2008), Buy American provisions, and Supplier Performance Risk System (SPRS) evaluations. Additional special requirements include supply chain traceability documentation retention for six years, product verification testing if invoked, marking per MIL-STD-129, and consignment delivery instructions specific to Portsmouth Naval Shipyard access procedures. Payment will be made via Wide Area Workflow (WAWF) electronic invoicing to DF AS Columbus, with Net 30 terms after material acceptance, and the contract is a Defense Priorities and Allocations System (DPAS) rated order certified for national defense.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPMYM326Q4055
Page20 of24
Addendum to 52.212-4, Contract Terms and Conditions - Commercial Products and
Commercial Services
Contract Terms and Conditions Required To Implement Statutes or Executive
Orders - Commercial Products and Commercial Services
Addendum to Contract Clauses
Contract Clauses
FAR Clauses Incorporated by Reference
Number
52.209-10
52.211-15 52.240-91
52.244-6
Title
Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026- 00038) Defense Priority and Allocation Requirements.
Security Prohibitions and Exclusions. (Deviation 2026-00038) Subcontracts for Commercial Products and Commercial Services. (Deviation 2026- 00038)
DFARS Clauses Incorporated by Reference
Number Title
252.225-7001 Buy American and Balance of Payments Program.
252.225-7002 Qualifying Country Sources as Subcontractors.
252.233-7001 Choice of Law (Overseas).
FAR Clauses Incorporated by Full Text
52.252-2 Clauses Incorporated by Reference.
CLAUSES INCORPORATED BY REFERENCE (FEB 1998)
Effective
Date
Feb 2026
Apr 2008 Feb 2026
Apr 2026
Effective
Date
Feb 2024 Mar 2022 Jun 1997
Alternate/
Deviation
Alternate/
Deviation
(Feb 1998)
Variation
Effective
Date
Variation
Effective
Date
This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address( es):
52.246-11
ACQUISTION.GOV
Higher-Level Contract Quality Requirement.
__ [Insert one or more Internet addresses]
(End of clause)
HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
(a) The Contractor shall comply with the higher-level quality standard(s) listed below.
(Dec 2014)
HIGHER LEVEL INSPECTION, Manufacturers of Level I components shall be required to have an effective Material Control System in operation that complies with MIL-I-45208, or ISO Q9001:2008, with the calibration system requirements or MIL-STD-45662, or IS010012, or ANSI-2540.1.
Quality systems in accordance with ISO9001 :2000, ISO9001: 1994, or ISO9002: 1994 are acceptable alternates. Although acceptance will be made in iRAPT, acceptance is NOT final until higher level inspections have been successfully completed, or 180 days have passed since the date the material was delivered, whichever date is earliest.[Contracting Officer insert the title, number (if any), date, and tailoring (if any) of the higher-level quality standards.l[Contracting Officer insert the title, number (if any), date, and tailoring (if any) of the higher-level quality standards.]
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in-
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require-
File details come from the government source that posted it. Updated .