Attachment 2 - TDP PNTDP0166 VER 001 SPMYM326Q4055.pdf

This is a Technical Data Package (TDP) for a SPRING, HATCH component to be manufactured in accordance with NAVSEA drawing 7106789 F/N 138 and applicable engineering standards. The document is Version 001, dated May 12, 2026, with NIIN PNTDP0166.

The material specified is designated as SPECIAL EMPHASIS material due to its critical application in shipboard systems where failure could result in serious personnel injury, loss of life, loss of vital systems, or loss of the ship itself. The material is subject to scope of certification and quality assurance requirements. Key manufacturing requirements include compliance with ASTM B196 C17200 FORM-ROD-TEM TB00 standards and NAVSEA drawing 7106789. All waivers and deviations, regardless of significance, require approval by the Contracting Officer and must be classified as Critical, Major, or Minor. Configuration control is mandatory, with contractors required to maintain baseline configurations and submit latest assembly configurations in electronic format. The contractor must establish procedures for maintaining material traceability through all process operations, including subcontracted work, with permanent traceability markings applied per MIL-STD-130. Quality system requirements mandate compliance with ISO-10012 or ANSI-Z540.3 for calibration systems. Final inspection includes material sampling with zero-defect lot acceptance and one-defect lot rejection based on applicable military specifications or standards. Government-furnished material and equipment requires documented control procedures addressing visual examination, completeness verification, material quality verification, storage conditions, functional testing, identification and protection from improper use, damage reporting, and proper handling. Test certifications must be positive and unqualified with no disclaimers acceptable. A Certificate of Compliance per CDRL DI-MISC-82386 is required, specifying contractor information, contract number, NSN, FSC, NTCs, cure date, manufacturer's compound number, weld procedure data where applicable, HM&E testing requirements, and compliance statements with authorized personnel signatures.