Amend_0004_SPM8E314R0005.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICAITON NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicble)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICIATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a)By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPIRATION DATA (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc. ) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION ( Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous edition unusable

1 5

SPM8E3

Defense Logistics Agency Troop Support 700 Robbins Ave.

Philadelphia, PA 19111 Vanessa Porter, (215) 737-0516

SPM8E3-14-R-0005

3/28/2014

See Page 2

Please Note: This amendment contains attachments.

4/25/2014

AMENDMENT 0004 PAGE 2 OF 5

SPM8E3-14-R-0005

1. On page 63 of the solicitation (under Factor II – Technical Merit, Sub-Factor (c) – Socio Economic Objectives), third paragraph, the third sentence is amended to read as follows: “The percentage shall be formulated using the estimated annual demand value of $30 million for Zone 1 or $21 million for Zone 2 as the divisor.”

2. The NAICS code was omitted from Block 10 of page 1 of the solicitation. The NAICS code of 333999 applies to this requirement.

3. On page 58 of solicitation, under SPECIAL INSTRUCTIONS FOR THE SUBMISSION OF PROPOSAL INFORMATION: A. PROPOSAL ORGANIZATION/GENERAL INFORMATION is amended to read as follows:

****Non-Price Proposals, including attachments (except for attachment for FACTOR II, Subfactor (b), see page 62) shall be no longer than 50 pages (Times New Roman, 12 point font, single spaced). Paper size SHALL NOT exceed 8 ½ inches by 11 inches standard size. Graphics and charts are permitted to have a font and font size other than Times New Roman 12 point. Font must be legible and font size should be no smaller than 8 point. Any information included in a proposal past page 50 except the attachment for FACTOR II, Subfactor (b) will not be considered.

4. Interested parties have submitted the following questions. The questions with the answers are presented below.

Question 1: On page [58], “Non-Price Proposals, including attachments, shall be no longer than 50 pages.” Are Cover Letters and Tables of Contents included in the 50 pages?

Answer: No, they are not included.

Question 2: On page [60], Past Performance (a), “…Provide a list of your top 3 highest dollar value contracts performed OCONUS or CONUS at some point within the past 5 years for Maintenance, Repair and Operations (MRO)-type items.” Would the government accept past performance for other non- MRO DLA commodities (such as Class I) in place of the Class IV items specified? For example, could a contract to provide Prime Vendor services for a different commodity group be assessed as “relevant” and given a “substantial or satisfactory confidence” rating or would it be precluded from receiving those ratings because it was for a different class of commodities?

Answer: As per page 72 of the solicitation: “The Government will evaluate the relevancy of the contracts identified by the contractor in its proposal. Relevancy includes, but is not limited to:

similarity, recency, length, volume, delivery points, and dollar value. Performance occurring in the last five years may be considered recent with performance occurring in the last three years the most relevant… However, contracts determined ‘not relevant’ will not be evaluated for performance.” It would be a business decision by the offeror regarding which contracts to submit for past performance evaluation, provided the contracts are in accordance with the submission requirements on page 60, and included below for reference:

AMENDMENT 0004 PAGE 3 OF 5

(1) Provide a list of your top three (3) highest dollar value contracts performed at some point within the past five years for Maintenance, Repair, and Operations (MRO) type items as described in the SOW. This requirement may include contracts with Federal, state, or local government agencies and/or with commercial customers. If offeror lists less than three (3), the offeror should make a clear statement that less than three (3) contracts have been provided.

(2) In addition to the contracts in (1) above, provide a list of your top three (3) highest dollar value supply contracts at some point within the past five years with Federal, state or local government agencies, and/or with commercial customers, unless already listed above. For example, if two of the three contracts listed for requirement (1) are also your highest dollar value contracts, then only one additional contract is needed to satisfy requirement (2).

Question 3: The RFP states [in the Statement of Work, 15. Additional Requirements, (a) Storefront, 1.

i.]: “Carry general liability policy. Inventory will be insured for the full value.” Please clarify that the material in the storefront will be owned by the government. Will the offeror be required to insure government materials? If this will be a requirement for the offeror, is it possible to provide a dollar cap for the inventory?

Answer: 1) Yes, material in the Fort Polk, LA storefront is owned by the government. 2) Yes, the contractor will be required to insure government materials. 3) No, we cannot provide a dollar cap for the inventory.

Question 4: Ref. Page 32, SOW, Paragraph 4(a): SOW Paragraph 4 (a) does not list any technical requirements for interfacing with customer specific systems. Is the contractor required to develop any IT interfaces with customer systems, for example, with CEMAS or Maximo? Are there any additional requirements related to contractor reporting to customer-specific systems?

Answer: During contract performance, the TLS PV may be required to interface with additional customer specific systems as developed or implemented by the customer.

Question 5: Do the Distribution Ceiling Prices (i.e. the Distribution Matrix) apply to any item that may be ordered during the term of the contract regardless of whether or not the item is included with the initial PEL or Acceptable Alternates list incorporated into the initial contract award?

Answer: Yes, the Distribution Ceiling Prices are firm-fixed ceiling prices per order that are applicable to all items, including products and incidental services, that may be ordered during the life of the contract.

Question 6: Paragraph (1) of the Past performance instruction s state for the offeror to “provide a list of your top 3 highest dollar value contracts performed at some point within the past five years for Maintenance, Repair and Operations type items as described in the SOW”. For the most recent MRO TLS solicitations for Hawaii (SPM8E3-14-R-0003) and Southwest (SPM8E3-14-R-0004), Amendments were released that revised the instructions to: “Provide a list of your top 5 highest volume dollar contracts performed at some point within the past 5 years for Maintenance, Repair and Operations (MRO) type items as described in the SOW”. Will an amendment be issued for [the] solicitation that is consistent with Amendment #5 (Hawaii) and Amendment #6 (Southwest) to provide a list of the top 5 highest dollar value contracts for MRO type items within the past 5 years?

AMENDMENT 0004 PAGE 4 OF 5

Answer: No. The instructions in the solicitation are correct: “Provide a list of your top three (3) highest dollar value contracts performed at some point within the past five years for Maintenance, Repair and Operations (MRO) type items as described in the SOW.”

Question 7: Reference [page 5, paragraph] II Pricing states in part: “…Offerors must provide Acquisition Ceiling Prices for a minimum of 95% of the items on the PEL.” We…have seen, up until [this RFP], that the percentage of items to be priced has been 90% of the PEL. Will you consider reducing the percentage back to 90% to allow for a better competitive playing field and eliminate any perceived advantage to the incumbent?

Answer: No, the percentage of items on the PEL to be priced will remain at 95%. The requirement applies equally to all offerors.

Question 8: Reference [page 6, paragraph] IV Term states, “…The contracts resulting from this solicitation will be Indefinite Delivery/Indefinite Quantity Contracts with base ordering periods of 5 years and maximum terms of 5 years, which includes a 30-day implementation period, if needed, after award….” Previous solicitations have allowed for 60-day implementation period, which would allow for new competitors to establish their systems and eliminate any perceived advantage to the incumbent.

Will you consider restoring the implementation period to 60 days as has been the norm in previous solicitations?

Answer: At this time, there is no anticipation of revising the implementation period.

Question 9: For those offerors proposing a team approach, is it the expectation of the Government that each team member (company) must provide the full past performance requirements (potentially up to six citations per team member/company)? Or is it the expectation of the Government that each of the companies must be represented in the past performance citation requirement of providing the 3 highest value MRO and 3 highest value supply contracts per team for the full proposal.

Answer: In accordance with the instructions for submitting past performance information on page 60 of the solicitation, offerors may submit a maximum of six contracts total. For offerors that are proposing a joint venture, partnership, or teaming approach, it is a business decision by the offeror whether to submit contracts performed by the primary offering entity, contracts performed by a partner, or some combination of both. However, the offeror must follow the submission requirements outlined in the solicitation and may not submit more than six contracts. Please note that the most relevant past performance data is the information directly related to the primary offering entity.

AMENDMENT 0004 PAGE 5 OF 5

5. Attachments 1 and 2 of the solicitation are hereby replaced by the following:

a. Attachment 1 - File name: Attach 1 SPM8E3-14-R-0005 SC Zone 1 Price Proposal Revised.xlsx

b. Attachment 2 - File name: Attach 2 SPM8E3-14-R-0005 SC Zone 2 Price Proposal Revised.xlsx

Within each attachment is a Price Evaluation List (PEL), with revisions to items appearing in red. The revisions may be to any or all of the following: manufacturer, part number, description, quantity, or unit of issue.

Wherever the words “Attachment 1” or “Attachment 2” appear in the solicitation, the above referenced attachments shall apply.

6. Block 3 of Amendment 0003 should read 24 April 2014.

TAB 1-Price Evaluation List

Price Evaluation List - SOUTH CENTRAL Zone 1

PRICING PERIOD 1 (24 Months) PRICING PERIOD 2 (18 Months) PRICING PERIOD 3 (18 Months)

001 3M 35 3/4X66 BLUE TAPE Electrical Tape, Color Blue, Thickness 7 mil., Length 66 ft., Width 3/4 In., Max. Voltage 600, Max. Temp. 220 Degrees F, UV Resistance No, Material Vinyl, Characteristics Stretches to Conform to Virtually any Shape and Exhibits Excellent Mechanical and Electrical Insulation Properties, Resists Abrasion, Corrosion, Alkalis and Acid, Description Electrical Tape for Color Coding, Application Provides Superior All-weather Protection 116 RL 87 RL 87 RL

002 3M Multi-Surface 2090 2"X60' ScotchBlue™ Painter's Tape Original Multi-Surface 2090 100 EA 75 EA 75 EA

003 ACME Plastics PENT006LNV006A0 Polyethylene Sheet, .006 x 6'x 100', Clear, Sq. Ft Per Roll 600 440 RO 330 RO 330 RO

004 Allied Refrigeration Inc. FREON-22 #5690763 FREON-22 30LB TANK 318 EA 239 EA 239 EA

005 Alpena Quarry 24 IN. RIP RAP Stone, 24" Rip Rap 400 TN 300 TN 300 TN

006 AMERICAN LOCK A400K COMBINATION PADLOCK WITH KEY 100 EA 75 EA 75 EA

007 American Standard M922997-0020A AERATOR, FEMALE, 1.0 GPM, VANDAL-RESISTANT 200 EA 150 EA 150 EA

008 Armstrong 584 Ceiling Tile, 24 x24 In, 3/4 In T, Pk 12 4,000 PG 3000 PG 3000 PG

009 Armstrong 5NHE3 Cross Tee, Ceiling Tile Suspension System, Length 24 In., Width 15/16 In, Height 1 3/8 In, Material Hot Dipped Galvanized Steel, Color White, Load Carry Rating Intermediate Duty, Load Carrying 40.45 Lbs per Linear Ft, Resists Rust, Standards ASTM C635, For Use With Ceiling Tiles 100 EA 75 EA 75 EA

010 Bayer Environmental Science Univar Product Number: 789590 TOPCHOICE INSECTICIDE (RUP), 50 LB BG 80 BG 60 BG 60 BG

011 Berry Plastics Corporation 626214 or HS001 1 Mil 9' x 12' Plastic Drop Cloth 141 EA 106 EA 106 EA

012 Boral Best Block 8X8X16 Concrete masonry units (CMU) 8X8X16 Concrete masonry units (CMU), Heavy Weight 180 EA 135 EA 135 EA

013 Brasscraft G2R17X C 1/2X3/8OD FIPXCOMP CP QTR TURN ANGLE STOP 115 EA 86 EA 86 EA

014 BRASSCRAFT G2R17 1/2IPX3/8COM ANGLE STOP 400 EA 300 EA 300 EA

016 CableXpress CBX-HB-VH06 CABLEXPRESS H-SERIES 10U/6U/1U BLANK PANEL 350 EA 263 EA 263 EA

017 CableXpress CBX-HM-VHU48LCTP H-SERIES VERTICAL MODULE 48 FIBER 24 150 EA 113 EA 113 EA

018 Camfil Farr 049880-016 Filter, High Capacity MERV 8 Pleated Panel, 24 x 16 x 2 FILTER 263 EA 197 EA 197 EA

019 Camfil Farr 049880-015 Filter, High Capacity MERV 8 Pleated Panel, 24 x 18 x 2 FILTER 185 EA 139 EA 139 EA

020 Camfil Farr 049880-001 Filter, High Capacity MERV 8 Pleated Panel, 20 x 16 x 2 184 EA 138 EA 138 EA

021 Camfil Farr 049880-003 Filter, High Capacity MERV 8 Pleated Panel, 25 x 20 x 2 FILTER 144 EA 108 EA 108 EA

022 Camfil Farr 049880-004 Filter, High Capacity MERV 8 Pleated Panel, 25 x 16 x 2 FILTER 144 EA 108 EA 108 EA

023 Cantex Industries A53CA12 Conduit, Schedule 80, Trade Size 2 In., Nominal Length 10 Ft., Nominal Outside Dia. 2.375 In., Inside Dia. 1.939 In., Wall Thickness 0.218 In., Material of Construction PVC, Special Feature Bell End Special Feature, Standards UL 651 & NEMA TC 2 1,500 EA 1125 EA 1125 EA

025 Cantex Industries A53EA12 CONDUIT, SCHEDULE 80, 4 IN, Trade Size 4 In., Nominal Length 10 Ft., Nominal Outside Dia. 4.500 In., Inside Dia. 3.826 In., Wall Thickness 0.337 In., Material of Construction PVC, Special Feature Bell End Special Feature, Standards UL 651 & NEMA TC 2 198 EA 149 EA 149 EA

026 Cantex Industries 6141628 COUPLING, ONE PIECE, CONDUIT, Size 2 In., Material of Construction PVC, Dia. 2.75 In., Overall Length 2.55 In., For Use With Shedule 40 and Schedule 80 PVC Conduit, Standards UL 129 EA 97 EA 97 EA

027 Carlon See Description Conduit, PVC, Schedule 40, Rigid, 4" Trade Size, 4.03" ID, 4.50" OD, 10' Length 1,000 EA 750 EA 750 EA

028 Carlon E9802CN-CAR Device Box Covers: Cover Type - PVC Conduit Device Box, Gangs - 1, Application - Weatherproof, Configuration - Blank, Mount - Universal, Color - Gray 300 EA 225 EA 225 EA

029 Carlon B520A BOX PLASTIC NAILON 4" Diameter, Nail-On, Ceiling/Fixture Box 264 EA 198 EA 198 EA

031 Carlon E365D-CAR ROUND PLASTIC SPLICE BOX, 4" Diameter, Weatherproof Splice Box 240 EA 180 EA 180 EA

032 Carlon E382DE Outlet Box; 2-Gang Non-Metallic Gray Weatherproof T-Box with Threaded Holes 240 EA 180 EA 180 EA

033 Carlon E981EFN BOX, JUNCTION, 3/4" Single Gang FS Box 240 EA 180 EA 180 EA

034 Carlon E98DHGN-CAR COVER; 1-Gang Weatherproof Horizontal Duplex Cover 240 EA 180 EA 180 EA

035 Carlon E98GFCN-CAR COVER, GFCI Receptacle, 1-Gang, Weatherproof Cover 240 EA 180 EA 180 EA

036 Carlon E98TSCN-CAR COVER, Lever Switch, 1-Gang, Weatherproof Cover 240 EA 180 EA 180 EA

037 Carlon E9G2DDN-CAR Weatherproof Cover, (2) Duplex Receptacle; 2 Gang; Double Lid; Non Metallic; Gray; Horizontal Position; Approval Ul, Csa; Carlon[R] Brand; Application Marine Location; Standard Package 10 Per Carton 240 EA 180 EA 180 EA

038 Carlon E9G2SSN Cover, (2) Toggle Switch; 2 Gang; Lever Operator; Gray; Approval Ul, Csa; Carlon[R] Brand 240 EA 180 EA 180 EA

039 CERROWIRE 1483-1602G 250 FT. COIL 12-2 MC ALUMINUM CABLE 17 EA 13 EA 13 EA

040 Certainteed BET-197 Tile, Ceiling, 24 x 48 x 5/8, Trim Edge, 8 tiles per box. 336 BX 252 BX 252 BX

041 CertainTeed Saint-Gobain 5/8 x 8 x 4' Gypsum Board, M2Tech®, Moisture & Mold Resistant, 5/8" x 8' x 4' 52 EA 39 EA 39 EA

042 Charlotte Pipe & Foundry PVC 7112 Pipe, PVC, Schedule 40, 1 1/2" x 20' 57 EA 43 EA 43 EA

043 Charlotte Pipe & Foundry PVC 7200 Pipe, PVC, Schedule 40, 2" x 20' 57 EA 43 EA 43 EA

044 Cornett Bolt & Screw ABHDG58824 ANCHOR BOLT, HOT DIPPED GALVANIZED, 5/8" X 8" X 2 x 4, Nut an d Washer is Included 250 EA 188 EA 188 EA

045 Cornett Bolt & Screw HEXSA34414 ANCHOR, 3/4" X 4 1/4"HEX HEAD SLEEVE ANCHOR 100 EA 75 EA 75 EA

046 DAP 18001 5.5 FL OZ TUBE TUB AND TILE CAULK 96 EA 72 EA 72 EA

047 DAP Products Inc. 11403 Indoor/Outdoor Sealant, with MICROBAN® Antimicrobial Product Protection, ALEX Ultra® 230, Clear, 10.1 fl. Oz. 96 EA 72 EA 72 EA

048 DAP Products Inc. 18670 PAINTERS CAULK CONTAINER SIZE 10.1 OZ All purpose acrylic latex painter's caulk. Applies smoothly and easily. Adheres to wood, plaster, drywall and masonry. Resists cracking and chalking. Interior/exterior use. Paintable. Water clean-up. 25 Year Durability Guarantee. Meets ASTM Specification C 834 for extrudability, artificial weathering, extension-recovery and slump. 84 EA 63 EA 63 EA

049 DAP Products Inc. 08641 Silicone Rubber Sealant,100%, Clear, Window & Door, 10.1 fl. oz. 60 EA 45 EA 45 EA

050 Dewalt DW8725 Abrasive Cutoff Wheel, Type 1, Diameter 6 In., Thickness 0.040 In., Max. RPM 10100, Material Aluminum Oxide, Arbor Hole 7/8 In., Diamond Knockout No, Wheel Type Reinforced, 60 Grit, Wheel Specifications A60T, Application General Purpose Metal Cutting 180 EA 135 EA 135 EA

051 Dewalt DW8001B4 ABRASIVE CUT-OFF WHEEL, 14 IN D, 7/64 IN T, PACK OF 4 EA 80 PG 60 PG 60 PG

052 Dewalt DC9096-2 Battery Pack, Voltage 18.0, Battery Type NiCd, Battery Capacity 2.4A/hr.Features (2) High Capacity XRP(TM) Batteries Have 40 Percent More Run Time Than Standard Batteries, For Use With Dewalt 18V Tools, Includes (2) Dewalt Mfr. No. DC9096 Batteries, Package Quantity 2 59 PG 44 PG 44 PG

053 Dial Professional DPR45901 Combat Ant Killing System, Child Resistant, Kills Queen & Colony, 6/Bx 150 BX 113 BX 113 BX

054 Dow Chemical Company STYROFOAM™ Brand Square Edge Insulation STYROFOAM™ Brand Extruded Polystyrene Foam (XPS) Square Edge Insulation, 2" Nominal Board Thickness, R-Value 10.0, 4'x8' Board Size, 25 PSI Minimum Compressive Strength 135 EA 101 EA 101 EA

055 Dupont TY122SWH2X0006G1 COVERALLS, HOODED, TYVEK MATERAIL, FEATURES ELASTI 100 EA 75 EA 75 EA

056 ELKAY 51300C ELKAY WATER FILTER CARTRIDGE, 1.5 GPM 100 EA 75 EA 75 EA

057 Fastenal 0524365 1/2"-13 x 12" HGS 2200lb-WLL Threaded Machinery Eye Bolt 225 EA 169 EA 169 EA

058 FERGUSON ENTERPRISES DBPPEA53G Pipe, Domestic, 1 Black Plain End A53B Schedule 40 ERW SRL Material : Carbon Steel End Connection 1 : Plain End ASTM Specifications : ASTM A-53B. Unit of Measure : C 2,184 EA 1638 EA 1638 EA

059 Air Handler 21C091 Pleated Air Filter Standard Capacity MERV 7 Nominal Height 33 In. Nominal W idth 10 In. Nominal Depth 1 In. 1,008 EA 756 EA 756 EA

060 Flanders-Precisionaire 4044624 Filter, Air, Pleated, 20X20X1 936 EA 702 EA 702 EA

061 Air Handler 5M327 Pleated Filter Standard Capacity MERV - Nominal Height 16 In. Nominal Width 20 In. Nominal Depth 2 In. 624 EA 468 EA 468 EA

062 Air Handler 2DYV8 Pleated Filter High Capacity MERV 11 Nominal Height 20 In. Nominal Width 20 In. Nominal Depth 2 In. 624 EA 468 EA 468 EA

063 Air Handler 4YUY6 Pleated Filter High Capacity MERV 10 Nominal Height 20 In. Nominal Width 25 In. Nominal Depth 2 In. 492 EA 369 EA 369 EA

064 FLUIDMASTER 400A Fill Valve, Anti-Siphon, Adjustable Height 9 To 14 In, Replaces Most Old Style Fill Valves And Floats, Black And Gray, Fits Most Toilet Tanks. ADA Compliant : Yes CSA Certified : Yes

100 EA 75 EA 75 EA

065 FLUIDMASTER PRO 57K FLUSH VALVE KIT, WITH BOLTS AND GASKETS 100 KT 75 KT 75 KT

066 FLUIDMASTER F400A Fill Valve, Anti-Siphon, Adjustable Height 9 To 14 In, Replaces Most Old Style Fill Valves And Floats, Black And Gray, Fits Most Toilet Tanks. ADA Compliant : Yes CSA Certified : Yes

103 EA 77 EA 77 EA

067 FMC Industrial Chemicals 4473 Soda Ash, Grade 100, 50lb. Bag 9,180 BG 6885 BG 6885 BG

068 Fox Valley FC16VC NAIL, COMMON, GALVANIZED, flat head (16D) 3-1/2" x 11/32" x 8, 50 Lb. Box 52 BX 39 BX 39 BX

069 GE F28T8/XLSPX41ECO Linear Fluorescent Lamp, Lamp Shape T8, Diameter 1 In., Length 48 In., Length (In.) 48, Base Type Medium Bi-Pin (G13), Start Type Instant, Lamp Designation F28T8/XL/SPX*/ECO, 28 Watts, Lamp Tone Cool, Color Temp. 4100K, CRI 82, Initial Lumens 2725, Mean Lumens 2562, Average Life 50, 000 hr., No Shatter-Resistant, Meets 2012 Lighting Legislation Energy, General Purpose. Only shipped in quantities of 36. 162 EA 122 EA 122 EA

070 GE 150PS25/RS/STG Incandescent Lamp, Lamp Type Incandescent, Lamp Shape PS25, Base Type Medium Screw (E26), 150/133 Watts, 130/120 Voltage, Lamp Designation 150PS25/RS/STG, Initial Lumens 2160/1650, Max. Overall Length 6-15/16 In., Lamp Finish Inside Frost, Average Life 1000/2600 hr., Lamp Dia. 3-1/8 In., Shatter-Resistant Yes, Meets 2012 Lighting Legislation Energy 140 EA 105 EA 105 EA

071 GE LIGHTING F32T8/XL/SP41ECO Fluorescent Linear Lamp, Lamp Shape T8, Diameter 1 In., Length 48 In., Length (In.) 48, Base Type Medium Bi-Pin (G13), Start Type Rapid, Lamp Designation F32T8/XL/SP*/ECO, 32 WattsLamp Tone Cool, Color Temp. 4100K, CRI 78, Initial Lumens 2800, Mean Lumens 2660, Average Life 42, 000 hr.No Shatter-ResistantMeets 2012 Lighting Legislation Energy Standards, General Purpose. Only shipped in quantities of 36. 806 EA 605 EA 605 EA

072 GE LIGHTING F32T8/SP35/ECO Fluorescent Linear Lamp, Lamp Shape T8, Diameter 1 In., Length 48 In., Length (In.) 48, Base Type Medium Bi-Pin (G13), Start Type Rapid, Lamp Designation F32T8/SP35/ECO, 32 WattsLamp Tone Neutral, Color Temp. 3500K, CRI 78, Initial Lumens 2600, Mean Lumens 2440, Average Life 36, 000 hr., Min. Starting Temp. -441.67 Degrees F, No Shatter-Resistant, ANSI Code 1005-2, Meets 2012 Lighting Legislation Energy Standards, General Purpose. Only shipped in quantities of 36. 272 EA 204 EA 204 EA

073 GE LIGHTING F13BX/827/ECO Plug-In CFL, Non-Dimmable, Lamp Type Single Tube, Lamp Designation F13BX/ECO, Start Type Preheat, 13 Watts, Incandescent Equivalent (Watts) 60, Base Type 2-Pin (GX23), Lamp Shape T4Lamp Tone Soft White, Color Temp. 2700K, CRI 82, Initial Lumens 825, Mean Lumens 710, Average Life 10, 000 hr., 7.0 Length (In.), Max. Overall Length 7-1/4 In., Min. Starting Temp. 32 Degrees F, 32 Min. Starting Temp. (F) 196 EA 147 EA 147 EA

074 GE LIGHTING F34/CX41/WM/ECO Fluorescent Linear Lamp, Lamp Shape T12, Diameter 1-1/2 In., Length 48 In.Base Type Medium Bi-Pin (G13), Start Type Rapid, Lamp Designation F34/CX41/WM/ECO, 34 WattsLamp Tone Cool, Color Temp. 4100K, CRI 87, Initial Lumens 2500, Mean Lumens 2200, Average Life 20, 000 hr.No Shatter-ResistantMeets 2012 Lighting Legislation Energy Standards, General Purpose. Only shipped in quantities of 30. 180 EA 135 EA 135 EA

075 GE LIGHTING Q45T4/CL/DCR QUARTZ LAMP Halogen Light Bulb, Lamp Type Single Ended, Lamp Shape T4, Base Type 2-Pin Prefocus (GY16d), 45 Watts, 120 Voltage, Lamp Dia. 1/2 In., Lamp Finish Clear, Initial Lumens 845, Color Temp. 2850KLamp Designation Q45T4/CL/DCR 6.6AV, Average Life 500 hr., Max. Overall Length 2-1/2 In.Meets 2012 Lighting Legislation Energy, Primary Application Airfield and Airport, Shatter-Resistant No 72 EA 54 EA 54 EA

076 Gold Bond GB00091200 Gypsum board, Gold Bond, 1/2" x 4' x 12'. High Strength Lite Gypsum Board 500 EA 375 EA 375 EA

077 Gold Bond GB99501200 Gypsum Board, Gold Bond, 12 ft. x 4 ft. x 5/8 in. Fire Shield 100 EA 75 EA 75 EA

078 HILTI 00241382 HIT-RE 500-SD (11.1 fl oz/330 ml): 131 EA 98 EA 98 EA

079 Hubbell 10146 No-Wrench Screw Anchor 66" (1676 mm) long with 10" (254 mm) Helix Tripleye 400 EA 300 EA 300 EA

080 Hubbell HBL5362 RECEPTACLE, DUPLEX; Wiring Devices Connector, AC Power, Plug, 20A, 125V 260 EA 195 EA 195 EA

081 Hubbell HBL2810 SINGLE RECEPTACLE; AC Receptacle NEMA L21-30 Female Black 120/208 Volt 30 Amp 204 EA 153 EA 153 EA

082 Hubbell SS720 COVER,RECEPTACLE; Wall Plate AC 1 Gang Twist Lock 20/30 Amp Stainless Steel 204 EA 153 EA 153 EA

084 Hubbell SEC50BA CORD CONNECTOR, LOW PROFILE, BLACK, 1/2 IN; CONDUIT FITTING, NYLON 6.6 100 EA 75 EA 75 EA

085 Hubbell WS12771 SWITCH, MOTION SENSOR 90 EA 68 EA 68 EA

086 Hubbell HBL-5269C CONNECTOR, STRAIGHT, NEMA, UL LISTED, CSA CERTIFIED, 15 A, 125 V, BACK WIRE 80 EA 60 EA 60 EA

087 Hubbell 5262W Receptacle, 2-Pole 3-Wire Grounding, 15A 125V, 5-15R, Smooth Nylon Face, White 153 FT 115 FT 115 FT

088 U.S.A. Wire and Cable 6-03-WG VNTC 6-3 W/G VNTC TRAY CABLE 5,000 FT 3,750 FT 3,750 FT

089 Ideal Industries, Inc. 30-073 Wire Connector, Maximum Voltage 600 Volts, Maximum Wire Combination 4, Minimum Wire Combination 2, Maximum Wire Size 16 AWG, Minimum Wire Size 20 AWG, Connector 73B, Color Orange, Wire Nut, Package 100 100 PG 75 PG 75 PG

090 INTERMATIC K4221C CADMIUM SULFIDE PHOTOCELL, 120 V 50/60 HZ. 1800 WATT 85 CD 64 CD 64 CD

091 John Deere TCU15882 Mower Blade Kit TCU15882 - Set of 3 Blades 100 KT 75 KT 75 KT

092 JOHNSON CONTROLS M9116-HGA-2 Electric Non-Spring Return Proportional Control Actuator with Tandem Operation(0 - 10 VDC) 63 EA 47 EA 47 EA

093 LAB SAFETY SUPPLY 8Z790 SAFETY GLASSES, GRAY, SCRATCH RESISTANT 60 EA 45 EA 45 EA

094 Leech Products F26 Construction Adhesive Leech Products, 10.3 fl. oz. cartridge 900 EA 675 EA 675 EA

095 Leviton CS320-2I Wall Switch, 3-Way, Toggle, Switch Function Maintained, Amps AC 20, Voltage AC 120 to 277, Rated HP 1, Wiring Method Side, Color Ivory, Grade Commercial, Description/Special Features Quiet Switch, Standards NEMA: WD-1 and WD-6ANSI: C-73UL Fed Spec WS896E: File #E7458UL Standard: UL 20CSA C22.2 No. 111: File #152105NOM: 057 290 EA 218 EA 218 EA

096 Leviton 6AS10-05E Patch Cord, Slimline, CAT 6A/10G, 5' Black 150 EA 113 EA 113 EA

097 Leviton 1221-2I Wall Switch, 1-Pole, Toggle, Switch Function Maintained, Amps AC 20, Voltage AC 120 to 277, Rated HP 1, Wiring Method Back and Side, Color Ivory, Grade Specification, Description/Special Features Quiet Switch, Standards NEMA: WD-1 and WD-6, ANSI: C-73, UL Fed Spec WS896E: File #E7458, UL Standard: UL20, CSA C22.2 No. 111: File #152105, NOM: 057, RoHS: Compliant 138 EA 104 EA 104 EA

098 Leviton CS315-2I Wall Switch, 3-Way, Toggle, Switch Function Maintained, Amps AC 15, Voltage AC 120 to 277, Rated HP 1/2, Wiring Method Side, Color Ivory, Grade Commercial, Description/Special Features Quiet Switch, Standards NEMA: WD-1 and WD-6, ANSI: C-73, UL Fed Spec WS896E: File #E7458, UL Standard: UL20, CSA C22.2 No. 111: File #152105, NOM: 057 100 EA 75 EA 75 EA

099 Leviton 5320-ICP Receptacle, Wall, 15 A 78 EA 59 EA 59 EA

100 Leviton ODS10-IDI Switch, Motion Sensor 60 EA 45 EA 45 EA

101 Leviton 84014 1G SS BLANK PLATE 57 EA 43 EA 43 EA

102 Lithonia SB232 MV Decorative Fluorescent Fixtures, Square Basket Wraparound Fixture Type 76 EA 57 EA 57 EA

103 Lithonia 2GT8 4 32 A12 MVOLT 1/4 GEUS Recessed Troffer, Lensed, F32T8, 4 Lamp 65 EA 49 EA 49 EA

104 M. K. Morse Company RB814T50 8-by-3/4-by-0.035-Inch 14 TPI Bi-metal Reciprocating Saw Blade, 50-Pack 248 PG 186 PG 186 PG

105 M. K. Morse Company RB12501014T50 12-by-3/4-by-0.050 10/14 TPI Bi-metal Reciprocating Saw Blade, 50-Pack 150 PG 113 PG 113 PG

106 MOEN 64620 CHR FAUCET W/WASTE 200 EA 150 EA 150 EA

107 MOEN INC 64621 CHATEAU SERIES, SINGLE ACRYLIC KNOB HANDLE, WITH WASTE ASSEMBLY 205 EA 154 EA 154 EA

108 MOEN INC L64620 CHATEAU SERIES SINGLE HANDLE LOW ARC BATHROOM FAUCET, CHROME 128 EA 96 EA 96 EA

110 MORRISON SUPPLY CO TS1150 017072-144 1/2X260 TEFLON TAPE 550 EA 413 EA 413 EA

111 MORTAN SALT 24600-01498 POTASSIUM CHLORIDE PELLETS, 40 LB BAG 392 BG 294 BG 294 BG

112 MORTON SALT 15300000 WATER SOFTENER PELLETS, COMMERCIAL, 50 LB BAG 1,764 BG 1323 BG 1323 BG

113 NASHUA 357N DUCT TAPE, 72MM X 55M, SILVER 2,624 RO 1968 RO 1968 RO

114 National Gypsum Company GB99500800 Gypsum Board, Gold Bond, Fire Code, 5/8" x 8' x 4' 107 EA 80 EA 80 EA

115 NIBCO 604 1/2 ADAPTER, Nominal Size 1/2 In., Outside Dia. 5/8 x 1/2 In., Connection C x MNPT, Material of Construction Wrot Copper, Temp. Range -20 to 400 Degrees F, Max. Pressure 722 psi @ 100 Degrees F, Standards ASME/ANSI B16.22, Compliance Certified For Use In Potable Water Applications in CA and VT 116 EA 87 EA 87 EA

116 NIBCO 604 3/4 ADAPTER, Nominal Size 3/4 In., Outside Dia. 7/8 x 3/4 In., Connection C x MNPT, Material of Construction Wrot Copper, Temp. Range -20 to 400 Degrees F, Max. Pressure 582 psi @ 100 Degrees F, Standards ASME/ANSI B16.22, Compliance Certified For Use In Potable Water Applications in CA and VT 88 EA 66 EA 66 EA

117 NIBCO 607LT 1/2 ELBOW 90 DEGREE, Nominal Size 1/2 In., Outside Dia. 5/8 In., Connection C x C, Material of Construction Wrot Copper, Temp. Range -20 to 400 Degrees F, Max. Pressure 722 psi @ 100 Degrees F, Standards ASME/ANSI B16.22, Compliance Certified For Use In Potable Water Applications in CA and VT 78 EA 59 EA 59 EA

118 Norton 7660701583 Sanding Sheet, 11x9 In, 100 G, Garnet, PK25 100 EA 75 EA 75 EA

119 Owens Corning 2144074 ACOUSTICAL BATT INSULATION, 3 5 4,000 SF 3000 SF 3000 SF

120 Owens Corning See Description Shingles, Asphalt, TruDefinition, Duration Series, Onyx Black AR Laminate 940 BD 705 BD 705 BD

121 Owens Corning 199717 PIPE INSULATION, FIBERGLASS, 0.88 IN ID 240 EA 180 EA 180 EA

122 PANDUIT CORPORATION C2WH6-F WIRE DUCT COVER, WHITE, 6 FT 120 EA 90 EA 90 EA

123 PASS & SEYMOUR CR20-W RECEPTACLE; 20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Narrow Body Duplex Receptacle, Straight Blade, Commercial Grade, Self Grounding, Side Wired, Steel Strap 380 EA 285 EA 285 EA

124 PASS & SEYMOUR 2095-I RECEPTACLE; GFCI Receptacle 20 Amp 125 Volt AC 266 EA 200 EA 200 EA

125 Philips Advance ICN2P32N Ballast, High Frequency; Instant Start; F32T8 Lamp; 2 Lamp(S); 32 W Lamp Wattage; Input Voltage 120 to 277 V; Input Current 0.49 Ampere; Input Power 59 W; 50/60 HZ; 0.99 Power Factor; 0.88 Ballast Factor; 10 Percent Maximum THD; Parallel Wiring 196 EA 147 EA 147 EA

126 Philips Advance ICN-4P32-SC Electronic Ballast, High Frequency; Instant Start; Normal Output, HPF Circuit; F32T8, FBO31T8, F32T8/U6 Lamp; Straight/U Lamp; 4 Lamp(S); 32 W Lamp Wattage; Input Voltage 120/230/277 V; Input Current 0.94/0.49/0.41 Ampere; Input Power 112 W; 50/60 HZ 173 EA 130 EA 130 EA

127 Philips Advance IOPA4P32SC35I Electronic Ballast, High Frequency; F32T8ES Lamp; Straight Lamp; 4 Lamp(S); 32 W Lamp Wattage; Input Voltage 120/277 V; Input Current 0.31 to 0.73 Ampere; Input Power 85/87 W; 50/60 HZ; 0.87 Ballast Factor; 10 Percent Maximum THD; Parallel Wiring 60 EA 45 EA 45 EA

128 Phillip F28T5/835/ALTO Bulb, Fluorescent, 28 Watt 46" 3500K T5 Miniature Bipin Base Bulb 800 EA 600 EA 600 EA

129 Phillip F32T8/TL741/ALTO Bulb, Fluorescent, 32 Watt 48" 4100K T8 Medium Bipin Base Bulb 625 EA 469 EA 469 EA

130 PUROLATOR L98-686 PUROLATOR EXTENDED SURFACE PLEATED FILTER, 24" X 24" X 1" 300 EA 225 EA 225 EA

131 PUROLATOR L91-578 PUROLATOR EXTENDED SURFACE PLEATED FILTER, 12" X 24" X 2" 60 EA 45 EA 45 EA

132 Quikrete 1102-80 Mortar Mix, 80 lb. bag 856 BG 642 BG 642 BG

133 Quikrete 1585-01 Grout, Non-Shrink, 50lb Bag 798 BG 599 BG 599 BG

134 Quikrete 1125-71 Cement, Masonry, Type S, 70 lb Bag 450 BG 338 BG 338 BG

135 Quikrete 1101-80 Concrete Mix, 80lb Bag 320 BG 240 BG 240 BG

136 Quikrete 1701-58 Asphalt Cold Patch, 50lb Bag 120 BG 90 BG 90 BG

137 Quikrete 1004-50 Concrete Mix, Fast Setting, 50lb Bag 64 BG 48 BG 48 BG

138 RACO 191 Electrical Box, Square with Drawn Rounded Edges, Capacity 21.0 Cu-In, Material of Construction Galvanized Steel, No of 1/2 In Back Knockouts 1, No of 3/4 In Back Knockouts 4, No of 3/4 In Side Knockouts 8, Depth 1 1/2 In, Length 4.00 In, Width 4.00 In, Standards UL 1,258 EA 944 EA 944 EA

139 RACO 232 Square Box, Capacity 30.3 Cubic Inches, Box Welded with Corner Edges, Number of 1/2 Inch Back Knockouts 3, Number of 3/4 Inch Back Knockouts 2, Number of 1/2 Inch Side Knockouts 12, Number of 3/4 Inch Side Knockouts 8, No Bracket or Clamp, Length 4 Inches, Width 4 Inches, Depth 2 1/8 Inches 465 EA 349 EA 349 EA

140 RACO 695 Masonry Single Gang Box, Capacity 22.5 Cubic Inches, Non Gangable, Material Galvanized Zinc, 2 Inch Back Knockout, 4 Inch Side Knockout, 2 Inch End Knockout, Length 3 3/4 Inches, Width 1 31/32 Inches, Depth 3 1/2 Inches 370 EA 278 EA 278 EA

141 RACO 902C COVER, 4X4, DUPLEX RECEPTACLE 120 EA 90 EA 90 EA

142 Republic Conduit Manufacturing 1/2-EMT Conduit Lengths: Type - EMT - Thinwall Conduit; Trade Size (in) - 1/2 in; Length - 10 ft; Material - Steel, Galvanized; Color - Silver; End Type - Standard End (WESCO-78001002001) 1,060 FT 795 FT 795 FT

143 ROCKFORD SILK SCREEN PROCESS CS-18 TRAFFIC CONES, 6 EA PER PACKAGE 400 PG 300 PG 300 PG

144 Rust-Oleum 2764402 Paint, 7400 System, DTM 450 VOC ALKYD Enamel, High Gloss Finish, White, 1 Gallon Container. 400 CO 300 CO 300 CO

145 Rust-Oleum 5290402 RUSTOLEUM 5200 ACRYLIC ENAMEL, FLAT WHITE, 1 GAL 400 GL 300 GL 300 GL

146 Rust-Oleum 412402 Paint, 7400 System, DTM 450 VOC ALKYD Enamel, Flat Finish, Flat Black, 1 Gallon Container. 200 CO 150 CO 150 CO

147 Rust-Oleum 5278402 RUSTOLEUM 5200 ACRYLIC ENAMEL, FLAT BLACK, 1 GAL 200 EA 150 EA 150 EA

148 Rust-Oleum 1282300 Paint, 7400 System, DTM 450 VOC ALKYD Enamel, High Gloss Finish, Forest Green, 5 Gallon Container. 90 CO 68 CO 68 CO

149 Rust-Oleum 203031 MARKING PAINT, CAUTION BLUE, 17 OZ 60 EA 45 EA 45 EA

150 Sakrete 1952958 (65302880) Mortar, Type S High Strength Mortar/Stucco Mix, 80lb. bag - gray, UPC: 7-64661-13080-2 374 BG 281 BG 281 BG

151 Sakrete 65200390 (product #) Sakrete 80 Lb. Concrete Mix 300 BG 225 BG 225 BG

152 Sakrete 65200007 Concrete Mix, Maximizer, 80lb Bag 126 BG 95 BG 95 BG

154 Sealmaster M1240P TRAFFIC PAINT, WHITE, ACRYLIC, 5 GAL 51 EA 38 EA 38 EA

155 See Description See Description Concrete, Ready Mix, 3000 psi, To be delivered as needed. 500 CY 375 CY 375 CY

156 SHERWIN WILLIAMS 1554658 Contractor Series® Polyester 4" x 3/8" Roller Cover 144 EA 108 EA 108 EA

157 Purdy N689C62 White Sprig Brush, Type Flat Wall, Size 4" W, Length 3-5/8", Thickness 11/16", Bristle Material White China, Handle Material Natural Hardwood, Handle Style Beavertail 96 EA 72 EA 72 EA

158 Shop Vac 850-01-10 6 GALLON METAL SHOP VAC 80 EA 60 EA 60 EA

159 Simpson Strong Tie LUS26-WEST HANGER; Simpson Strong-Tie LUS26 Simpson Strong-Tie Joist Hanger 200 EA 150 EA 150 EA

160 Simpson Strong Tie H10Z H10Z Hurricane Tie Z-Max 100 EA 75 EA 75 EA

161 Sloan AC11-2.0 SHOWERHEAD, BRASS, 2GPM, ADJUSTABLE, SELF CLEANING 233 EA 175 EA 175 EA

162 Sloan R1004A Master Rebuild Kit, Urinal, Size 1.6, For Use With Regal Flushometers, Includes Drop-In Kit, Vacuum Break Repair Kit, Handle Repair Lit, O-Ring 150 EA 113 EA 113 EA

163 Sloan V-551A VACUUM BREAKER REPAIR KIT 150 EA 113 EA 113 EA

164 Sloan A156AA Washer Set Repair Kit, Toilets and Urinals, For Use With Regal Flush Valves, Includes Disc, Diaphragm, Hycar Seal, Handle Gasket 124 EA 93 EA 93 EA

165 Sloan V651A VACUUM BREAKER REPAIR KIT 120 EA 90 EA 90 EA

166 Sloan A1037A DIAPHRAGM REPAIR KIT, 1.5 GPF 100 KT 75 KT 75 KT

167 SPECTRUM S1295-125GM SODIUM CHLORIDE PELLETS 882 EA 662 EA 662 EA

168 Square D QO120 Miniature Circuit Breaker (QO) Standard, 20A, 1-Pole, 120/240 Vac, 1-Phase, 10kA 480 EA 360 EA 360 EA

169 Square D QOFP Plate, Filler - QO And NQOD Filler Plate, Fills Opening in Covers 200 EA 150 EA 150 EA

170 Square D QOB120 Current Rating 20 Amps, Minimum Wire Size 14 AWG, Maximum Wire Size 8 AWG, 120/240 Volts, Single Pole 148 EA 111 EA 111 EA

171 Square D QO230 Miniature Circuit Breaker (QO) Standard, 30A, 2-Pole, 120/240 Vac, 1-Phase, 10kA 67 EA 50 EA 50 EA

172 Square D D321NRB SWITCH FUSIBLE GD 240V 30A 3P NEMA3R 64 EA 48 EA 48 EA

173 Square D QO220 Miniature Circuit Breaker (QO) Standard, 20A, 2-Pole, 120/240 Vac, 1-Phase, 10kA 57 EA 43 EA 43 EA

174 Stanley 10-788 Knife, Retractable, 6-5/8", InstantChange™ 120 EA 90 EA 90 EA

175 SYLVANIA FO32/741/ECO LAMP,FLUORESCENT; 32 watt 48" T8 Medium Bi-Pin (G13) Base 4,100K 700 Series Octron Ecologic Fluorescent Sylvania Light Bulb 304 EA 228 EA 228 EA

177 TERRAN CORPORATION SACON PANELS 90LBS/CU FT 4 FEET X 6 FEET X 5.5 INCHES 200 EA 150 EA 150 EA

178 THOMAS & BETTS H104 3/8X10 3/8" x 10' Steel Threaded Rod 1,000 EA 750 EA 750 EA

179 THOMAS & BETTS TK111A 1/2" Compression Coupling, Steel-Zinc Plated, Concrete tight. For use with EMT Conduit 700 EA 525 EA 525 EA

180 THOMAS & BETTS 702 4 EG 4 in. Steel Pipe Strap with SilverGalv finish. For use with Rigid/IMC conduit and pipe. 100 EA 75 EA 75 EA

181 THOMAS & BETTS TC911 SC 1/2" 90 Degree Compression Connector, Die Cast Zinc. For use with EMT Conduit 100 EA 75 EA 75 EA

182 US FABRICS INC US 230 Woven Runway Fabric, 100% polypropylene, monofilament, filtration geotextile made of 100% high-tenacity polypropylene yarns. 15' X 300' ROLLS 2,504 RO 1878 RO 1878 RO

183 USG 14113411708 Drywall, Ultralight, Sheetrock Brand, 8' x 4' x 1/2" Sheet 355 SH 266 SH 266 SH

184 USG 142110 Drywall, Sheetrock, Mold Tough™ FIRECODE® Core (Type X), 8' x 4' x 5/8" Sheet 80 SH 60 SH 60 SH

185 Warp Brothers 795-6X12-C Poly-Cover Plastic Sheets - 6mil 12x100 clear poly cover 372 EA 279 EA 279 EA

186 WIREMOLD CO 5781 Box Connector, 500/700Series, 1/2 In, PK2 100 PG 75 PG 75 PG

187 WIREMOLD CO V500 10FT RACEWAY 100 EA 75 EA 75 EA

188 WISS M1R Aviation Snip, 9 3/4 In, Left METAL CUTTING SHEAR 100 EA 75 EA 75 EA

189 Wooster R402-11 9'' Roller Frame Paint Tray, Capacity 1 qt., Steel, Depth 2-1/2 In., Length 16-1/2 In., Width 11 In. 500 EA 375 EA 375 EA

190 Wooster Q3108-3 BRUSH SOFTIP NYPOLY Q3108 3 400 EA 300 EA 300 EA

191 Wooster R406-11 Paint Tray Liner, Capacity 1 qt., Polypropylene, Depth 2-1/2 In., Length 16-1/2 In., Width 11 In. 352 EA 264 EA 264 EA

192 Wooster R241-4 Paint Roller Cover, Length 4 In., 3/4 In. Nap, Paint Type Flat Paints, Waterproofing and Stains, Rough Surfaces 188 EA 141 EA 141 EA

193 Wooster R205-4 Super Doo-Z Roller Cover with .375-Inch Nap, 4" 168 EA 126 EA 126 EA

194 Wooster Q4119-2 Golden Glo Angle Sash Paintbrush, 2-Inch 144 EA 108 EA 108 EA

195 Wooster Q3118-1 Paint Brush, Flat Sash, Size 1 In., Brush Length 2-3/16 In., Overall Length 10 In., Thickness 7/16 In., Brown Handle Color, Paint Type All Paints Including Latex, Acrylics, Oils and 2-Part Epoxies, Nylon/Polyester Brush Material, Brass Plated Steel Ferrule Material, Plastic Handle Material 141 EA 106 EA 106 EA

196 Wooster 4231-2 2-1/2 Alpha Angle Sash Paintbrush 126 EA 95 EA 95 EA

197 Wooster R241-9 Paint Roller Cover, Length 9 In., 3/4 In. Nap, Paint Type Flat Paints, Waterproofing and Stains, Rough Surfaces 123 EA 92 EA 92 EA

198 Wooster R239-9 Paint Roller Cover, Length 9 In., 3/8 In. NapPaint Type Flat Paints, Waterproofing and Stains, Smooth to Medium Surfaces 120 EA 90 EA 90 EA

199 Wooster 1123-3 Paint Brush, Flat Sash, Size 3 In., Brush Length 2-7/16 In., Overall Length 10 In., Thickness 11/16 In., Yellow Handle Color, Paint Type All Oil Based Paints, Varnishes and Stains, China Bristle Brush Material, Brass Plated Steel Ferrule Material, Plastic Handle Material 74 EA 56 EA 56 EA

200 Wooster RR302-4 1/2 Paint Roller Cover, Mini, Length 4-1/2 In., 3/8 In. NapPaint Type Paints, Enamels, Primers, Adhesives, Smooth/Medium Surfaces, Package Quantity 2 70 PG 53 PG 53 PG

TOTAL $ - 0 TOTAL $ - 0 TOTAL $ - 0

UNIT OF ISSUE LEGEND

BD Bundle

BG Bag

BX Box

CN Can

CO Container

CS Case

CY Cubic Yard

DR Drum

EA Each

FT Foot

KT Kit

PG Package

PK Package

RO Roll

SE Set

SH Sheet

TN Ton

ATTACHMENT #1 - SPM8E3-14-R-0005 - MRO South Central Zone 1 Price Proposal

SOURCE SELECTION INFORMATION

SEE FAR 2.101 & 3.104

TAB 2 Distribution Matrix P1

Distribution Matrix - Pricing Period 1 (24 Months)

PER ORDER

1 < $10.00 $3,698.88 656 656

2 $10.00-$24.99 $29,883.15 1,689 1,689

3 $25.00-$49.99 $72,781.08 2,007 2,006

4 $50.00-$99.99 $162,553.06 2,259 2,257

5 $100.00-$249.99 $544,974.82 3,316 3,299

6 $250.00-$499.99 $781,135.66 2,249 2,196

7 $500.00-$749.99 $646,290.70 1,120 1,057

8 $750.00-$999.99 $509,982.90 630 587

9 $1,000.00-$2,499.99 $2,239,193.82 1,667 1,401

10 $2,500.00-$4,999.99 $1,784,423.73 1,024 500

11 $5,000.00-$7,499.99 $1,207,090.00 710 197

12 $7,500.00-$9,999.99 $1,248,855.54 1,114 145

13 $10,000.00-$24,999.99 $3,624,484.52 1,894 237

14 $25,000.00-$49,999.99 $5,541,063.31 1,651 161

15 $50,000.00-$74,999.99 $5,004,667.96 1,207 82

16 $75,000.00-$99,999.99 $5,243,206.56 193 61

17 $100,000.00-$249,999.99 $6,375,663.59 362 39

18 $250,000.00-$499,999.99 $3,686,208.82 126 13

19 $500,000.00-$999,999.99 $16,054,383.22 99 28

20 > or = $1,000,000.00 $1,375,842.16 1 1

*For evaluation purposes, the # of Delivery Orders per tier are based on FY12 and FY13 historical data.

** Columns titled "TOTAL SALES FY2012 & FY2013" and "# OF LINE ITEMS" are provided for information purposes only and not part of the evaluation formula.

ATTACHMENT #1 - SPM8E3-14-R-0005 - MRO SOUTH CENTRAL ZONE 1 PRICE PROPOSAL

SEE FAR 2.101 AND 3.104

TAB 3 Distribution Matrix P2

Distribution Matrix - Pricing Period 2 (18 Months)

PER ORDER

1 < $10.00 492 492

2 $10.00-$24.99 1,267 1,267

3 $25.00-$49.99 1,505 1,505

4 $50.00-$99.99 1,694 1,693

5 $100.00-$249.99 2,487 2,474

6 $250.00-$499.99 1,687 1,647

7 $500.00-$749.99 840 793

8 $750.00-$999.99 473 440

9 $1,000.00-$2,499.99 1,250 1,051

10 $2,500.00-$4,999.99 768 375

11 $5,000.00-$7,499.99 533 148

12 $7,500.00-$9,999.99 836 109

13 $10,000.00-$24,999.99 1,421 178

14 $25,000.00-$49,999.99 1,238 121

15 $50,000.00-$74,999.99 905 62

16 $75,000.00-$99,999.99 145 46

17 $100,000.00-$249,999.99 272 29

18 $250,000.00-$499,999.99 95 10

19 $500,000.00-$999,999.99 74 21

20 > or = $1,000,000.00 1 1

*For evaluation purposes, the # of Delivery Orders per tier are based on FY12 and FY13 historical data.

** Column titled "# OF LINE ITEMS" are provided for information purposes only and not part of the evaluation formula.

ATTACHMENT #1 - SPM8E3-14-R-0005 - MRO SOUTH CENTRAL ZONE 1 PRICE PROPOSAL

TAB 4 Distribution Matrix P3

Distribution Matrix - Pricing Period 3 (18 Months)

PER ORDER

1 < $10.00 492 492

2 $10.00-$24.99 1,267 1,267

3 $25.00-$49.99 1,505 1,505

4 $50.00-$99.99 1,694 1,693

5 $100.00-$249.99 2,487 2,474

6 $250.00-$499.99 1,687 1,647

7 $500.00-$749.99 840 793

8 $750.00-$999.99 473 440

9 $1,000.00-$2,499.99 1,250 1,051

10 $2,500.00-$4,999.99 768 375

11 $5,000.00-$7,499.99 533 148

12 $7,500.00-$9,999.99 836 109

13 $10,000.00-$24,999.99 1,421 178

14 $25,000.00-$49,999.99 1,238 121

15 $50,000.00-$74,999.99 905 62

16 $75,000.00-$99,999.99 145 46

17 $100,000.00-$249,999.99 272 29

18 $250,000.00-$499,999.99 95 10

19 $500,000.00-$999,999.99 74 21

20 > or = $1,000,000.00 1 1

*For evaluation purposes, the # of Delivery Orders per tier are based on FY12 and FY13 historical data.

** Column titled "# OF LINE ITEMS" are provided for information purposes only and not part of the evaluation formula.

ATTACHMENT #1 - SPM8E3-14-R-0005 - MRO SOUTH CENTRAL ZONE 1 PRICE PROPOSAL

TAB 5 Incidental Service

Incidental Service Scenario Pricing

INCIDENTAL SERVICE SCENARIO PERFORMANCE LOCATION SUB-CONTRACTOR NAME TOTAL ACQUISITION PRICE*

A 20’ x 30’ rectangular conference room needs to be carpeted.

The customer requires the following carpet tile to be used: Milliken; Part Number: 6391-DR-TBD; Item Description: Modular Carpet Tile, Design Rhythms, 36"x 36" Tufted Modular Carpet with Comfort Plus cushion, Pattern Name: Zirconia, Color Name: 102 Quarry Stones, Product PIN# 639 J -DR-TBD.

The conference room has a concrete floor. The previous carpeting has been removed and the floor is level. The floor has been fully prepped and all furniture has been removed.

The Contractor shall install the carpet tiles to the manufacturer’s specifications. The Contractor is responsible for all clean-up and disposal throughout the entire work site in accordance with all applicable regulations.

The incidental service will require six (6) hours of labor per worker, with a total of two (2) workers. (Total of 12 hours of labor for this job). Lackland AFB, Lackland, TX

*Total Acquisition Price shall be for the LABOR COSTS ONLY for the incidental service. Please provide the name of your Sub-Contractor and a total acquisition price for the incidental service (LABOR ONLY for the installation and clean-up). Do NOT include the price of any supplies; assume all supplies are covered in separate line items on the delivery order. Do NOT include any management fee (Distribution).

ATTACHMENT #1 - SPM8E3-14-R-0005 - MRO SOUTH CENTRAL ZONE 1 PRICE PROPOSAL

TAB 6 Storefront

Storefront Scenario Pricing PRICING PERIOD 1 (24 Months) PRICING PERIOD 2 (18 Months) PRICING PERIOD 3 (18 Months)

STOREFRONT SCENARIO PERFORMANCE LOCATION EMPLOYEE JOB TITLES EMPLOYEE JOB DESCRIPTIONS UNBURDENED HOURLY WAGE RATE* BURDENED HOURLY WAGE RATE* BURDENED DAILY WAGE RATE** BURDENED WEEKLY WAGE RATE*** BURDENED MONTHLY WAGE RATE**** TOTAL BURDENED WAGES UNBURDENED DAILY WAGE RATE** UNBURDENED HOURLY WAGE RATE* BURDENED HOURLY WAGE RATE* BURDENED DAILY WAGE RATE** BURDENED WEEKLY WAGE RATE*** BURDENED MONTHLY WAGE RATE**** TOTAL BURDENED WAGES UNBURDENED HOURLY WAGE RATE* BURDENED HOURLY WAGE RATE* BURDENED DAILY WAGE RATE** BURDENED WEEKLY WAGE RATE*** BURDENED MONTHLY WAGE RATE**** TOTAL BURDENED WAGES

The Storefront shall operate as a small industrial supply store.

A warehouse approximately 3,000-4,500 square feet shall be provided by the customer.

Hours of operation shall generally be Monday through Friday from 8:00 AM – 4:30 PM Local Time (40 hour work week).

The operation of the Storefront shall require three employees which include one Store Clerk, one Material Handler and one Store Supervisor. The job descriptions for these employees are listed in Column D. Fort Polk, LA Storefront Clerk Full time on-site Storefront Clerk whose primary function is the resale of merchandise in a retail environment.