SPIs Combined.pdf
PDF 7 MB Posted
- Attached to
- SMDC lines for the USAF and FMS F-15 Program.
- Solicitation number
- FA821325R3015
About this file
These documents are Special Packaging Instructions (SPIs) for multiple explosive cord sets and SMDC lines to be procured by the Department of the Air Force. The SPIs detail precise packaging, handling, and shipping requirements for various explosive cord assemblies and detonating cord lines, with National Stock Numbers (NSNs) ranging from 1377-01-016-3205 to 1377-01-333-9317. The packaging instructions specify multi-level packaging protocols, including cushioning, barrier bags, and sealing methods, with considerations for international shipping standards and wood packaging material restrictions.
The procurement involves multiple line items, including explosive cord sets and SMDC lines, with quantities ranging from 4 to 43 units across different part numbers. The packaging instructions are categorized under Controlled Unclassified Information (CUI) and include detailed guidelines for Level A and Level B packaging requirements, with specific attention to protection against severe worldwide shipment conditions, handling protocols for war reserve materials, strategic deployments, and security assistance items. The documents emphasize precise packaging to prevent damage during transportation and storage, with specific requirements for overboxing, cushioning, and marking.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA821325R3015_______0001.pdf | ||
| FA821325R3015_______0001.pdf | ||
| CDRLs.pdf | ||
| CADPAD Item Marking Instruction - Ver 1.6.pdf | ||
| JFQR 1377-01-Various (F-15 SMDC) signed.pdf | ||
| EDLs Combined.pdf | ||
| Air Specs.docx | DOCX document | |
| Section M.pdf | ||
| Section L.pdf | ||
| Packaging Instructions.pdf | ||
| Item Descriptions_combined.pdf | ||
| Statement of Objectives.pdf | ||
| REPSHIP.pdf | ||
| ADC SOW Jan 2018.docx | DOCX document | |
| ES7034 (AS Attach .docx | DOCX document | |
| FA821325R3015.pdf |
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
CUI
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 05 JANUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406
SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
AutoCAD SHX Text
2169 MOD
AutoCAD SHX Text
DD
AutoCAD SHX Text
FORM
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPI NO. F01-016-3206
AutoCAD SHX Text
SPECIAL MARKINGS:
AutoCAD SHX Text
A) SPI NO. F01-016-3206
AutoCAD SHX Text
B) PROPER SHIPPING NAME: ARTICLES, EXPLOSIVE, N.O.S.
AutoCAD SHX Text
PACKAGING WAS MANUFACTURED.
AutoCAD SHX Text
C) UN POP MARKING:
AutoCAD SHX Text
**THE LAST TWO DIGITS OF THE YEAR DURING WHICH THE
AutoCAD SHX Text
CLOSURE:
AutoCAD SHX Text
LEVEL B:
AutoCAD SHX Text
LEVEL A:
AutoCAD SHX Text
USA/DOD/AF70
AutoCAD SHX Text n
AutoCAD SHX Text 4G/Y10/S/**
AutoCAD SHX Text
UN0349
AutoCAD SHX Text u
AutoCAD SHX Text
PART OR DRAWING NO.
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text
MILITARY PRESERVATION IAW MIL-STD-2073
AutoCAD SHX Text
PRESERVATIVE: N/A
AutoCAD SHX Text
CLEANING & DRYING: IAW MIL-STD-2073
AutoCAD SHX Text
MARKING IAW MIL-STD-129
AutoCAD SHX Text
UNSERVICEABLE METHOD: 41
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
QUP
AutoCAD SHX Text
ICQ
AutoCAD SHX Text
MULTIPLE PART NUMBERS
AutoCAD SHX Text
ORIGINAL
AutoCAD SHX Text
CORD ASSEMBLY, DETONATING
AutoCAD SHX Text 18043
AutoCAD SHX Text
DATE
AutoCAD SHX Text
AUTH.
AutoCAD SHX Text
CHK.
AutoCAD SHX Text
1377-01-016-3206 ES
AutoCAD SHX Text
NATIONAL STOCK NO.
AutoCAD SHX Text
CURRENT
AutoCAD SHX Text
REV
AutoCAD SHX Text P.S.
AutoCAD SHX Text
ILL.
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
DODPOPHM/USA/DOD/AF70/TR17020
AutoCAD SHX Text
SHEET 1 OF 5
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text A
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
LEVEL A LEVEL B
AutoCAD SHX Text
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
LENGTH WIDTH DEPTH
AutoCAD SHX Text
VARIES
AutoCAD SHX Text 10 3/8
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
AS SPECIFIED BELOW AND BILL OF MATERIALS
AutoCAD SHX Text
SPEC STYLE TYPE CL VRTY GR TR
AutoCAD SHX Text
VARIES
AutoCAD SHX Text
CNTR I.D.
AutoCAD SHX Text
ITEM DIM
AutoCAD SHX Text
ITEM WT.
AutoCAD SHX Text
LEVEL A:
AutoCAD SHX Text
LEVEL B:
AutoCAD SHX Text
CNTR O.D.
AutoCAD SHX Text
LEVEL A:
AutoCAD SHX Text
LEVEL B:
AutoCAD SHX Text
GROSS CU FT
AutoCAD SHX Text
GROSS WT LBS
AutoCAD SHX Text
DESIGN FRAGILITY G
AutoCAD SHX Text
ASTM D6251
AutoCAD SHX Text
ASTM D5118
AutoCAD SHX Text
LEVEL
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text
PACKING
AutoCAD SHX Text 10 3/8
AutoCAD SHX Text
AutoCAD SHX Text 16 3/4
AutoCAD SHX Text
AutoCAD SHX Text 1.043
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
K. KNIGHTON S. OYLER D. HALE J. BURLEIGH
AutoCAD SHX Text F01-016-3206
AutoCAD SHX Text
D) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.
AutoCAD SHX Text
RSC
AutoCAD SHX Text
III
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text V3c
AutoCAD SHX Text
IAW: ASTM D1974 SEALING METHOD C
AutoCAD SHX Text
IAW: ASTM D6251
AutoCAD SHX Text
MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.
AutoCAD SHX Text
SERVICEABLE METHOD: 41
AutoCAD SHX Text
AutoCAD SHX Text
(HEXANITROSTILBENE(HNS))
AutoCAD SHX Text
E) COE: AF 18-251
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
LTR
AutoCAD SHX Text
DATE
AutoCAD SHX Text A
AutoCAD SHX Text
UPDATED NOTICES AND DRAWING
AutoCAD SHX Text 21172
AutoCAD SHX Text A
2169 MOD
AutoCAD SHX Text
DD
AutoCAD SHX Text
FORM
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
REQD
AutoCAD SHX Text P/N
AutoCAD SHX Text
QTY
AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
SPECIFICATION
AutoCAD SHX Text
MATERIAL
AutoCAD SHX Text A/R A/R 1 A/R
AutoCAD SHX Text
TAPE, PACKAGING WRAP BAG, BARRIER CUSHIONING
AutoCAD SHX Text
3 X AS REQUIRED AS REQUIRED AS REQUIRED AS REQUIRED
AutoCAD SHX Text ASTM D5486 TYPE I OR V A-A-59135 CLASS 1, GRADE B MIL-DTL-117 TYPE I, CLASS F, STYLE 1 A-A-1898 GRADE II
AutoCAD SHX Text -4 -3 -2 -1
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SHEET 2 OF 5
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F01-016-3206
AutoCAD SHX Text
CORD ASSEMBLY, DETONATING
NOTES
1. MAY PACK UP TO 5 EACH ITEMS IN SHIPPING CONTAINER WITH CUSHIONING REF. -1 BETWEEN EACH ITEM.
2. WRAP ENDS OF DETONATING CORD USING REF.-3, PLACE IN BARRIER BAG REF.-2. REMOVE AIR AND SEAL. USE
CUSHIONING REF.-1 TO PREVENT ITEMS FROM TOUCHING SIDES OF SHIPPING CONTAINER AND PREVENT ANY
MOVEMENT. USE PACKAGING TAPE REF.-4 TO SEAL SHIPPING CONTAINER.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED
CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE
SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER
PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND
STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND
THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE
ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND
STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 4: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL
HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
DD
AutoCAD SHX Text
2169C MOD
AutoCAD SHX Text
FORM
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SHEET 3 OF 5
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text F01-016-3206
AutoCAD SHX Text
ITEM NOMENCLATURE
CORD ASSEMBLY, DETONATING
DD
AutoCAD SHX Text
2169C MOD
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
FORM
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
SHEET 4 OF 5
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F01-016-3206
AutoCAD SHX Text
ITEM REFERENCE
AutoCAD SHX Text
HEAT SEAL
AutoCAD SHX Text
ITEM NOMENCLATURE
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
AutoCAD SHX Text
DD
AutoCAD SHX Text
2169C MOD
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
FORM
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
SHEET 5 OF 5
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
REQD
AutoCAD SHX Text P/N
AutoCAD SHX Text
QTY
AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
SPECIFICATION
AutoCAD SHX Text
MATERIAL
AutoCAD SHX Text 20 1 2 2 2 1
AutoCAD SHX Text EDGE PROTECTORS PLYWOOD STRAPPING, STEEL STRAPPING, STEEL STRAPPING, STEEL PALLET, 4-WAY ENTRY
AutoCAD SHX Text AS MANUFACTURED 48 X 41 5/8 X 3/8 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 40 X 48
AutoCAD SHX Text NSN 8135-00-145-0070 (OR EQUAL) A-A-55057 TYPE A ASTM D3953 TYPE 1, REG DUTY, FIN B, GRADE 2 ASTM D3953 TYPE 1, REG DUTY, FIN B, GRADE 2 ASTM D3953 TYPE 1, REG DUTY, FIN B, GRADE 2 MIL-DTL-15011 TYPE I, CLASS 1, STYLE 1
AutoCAD SHX Text -6 -5 -4 -3 -2 -1
AutoCAD SHX Text
40 BOXES @ 20 LBS NET PALLET WT PLYWOOD WT STRAPPING WT
AutoCAD SHX Text
AutoCAD SHX Text
800 LBS LBS 65 LBS LBS 16.95 LBS 1.40 LBSLBS
AutoCAD SHX Text
883.35 LBS
AutoCAD SHX Text
CUBE OF PALETIZED LOAD = 48.4
AutoCAD SHX Text
PALLETIZATION PROCEDURE FOR LEVEL B PACK
AutoCAD SHX Text
PALLETIZATION PROCEDURE FOR LEVEL B PACK
AutoCAD SHX Text F01-016-3206
AutoCAD SHX Text
ITEM NOMENCLATURE
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
1. MAY PACK UP TO 5 EACH ITEMS IN SHIPPING CONTAINER WITH CUSHIONING REF.-1 BETWEEN EACH ITEM.
2. WRAP ENDS OF DETONATING CORD USING REF.-3, PLACE IN BARRIER BAG REF.-2. REMOVE AIR AND SEAL. USE CUSHIONING REF.-1 TO PREVENT ITEMS FROM TOUCHING SIDES OF SHIPPING CONTAINER AS WELL A PREVENTING
ANY MOVEMENT.
3. SEAL CONTAINER USING REF.-4, ACCORDING TO THE DRAWING.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH THE PREVIOUS EDITION OF THIS SPI DO NOT REQUIRE
REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 4 : SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTICE 6: PALLETIZATION AND UNIT LOADS SHALL BE IAW MIL-STD-1660 FOR AMMUNITION AND EXPLOSIVES.
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 19 JANUARY 2021. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406
SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
AutoCAD SHX Text
2169 MOD
AutoCAD SHX Text
DD
AutoCAD SHX Text
FORM
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPI NO. F01-251-8522
AutoCAD SHX Text
SPECIAL MARKINGS:
AutoCAD SHX Text
A) SPI NO. F01-251-8522
AutoCAD SHX Text
B) PROPER SHIPPING NAME: ARTICLES, EXPLOSIVE,
AutoCAD SHX Text
PACKAGING WAS MANUFACTURED.
AutoCAD SHX Text
C) UN POP MARKING:
AutoCAD SHX Text
**THE LAST TWO DIGITS OF THE YEAR DURING WHICH THE
AutoCAD SHX Text
CLOSURE:
AutoCAD SHX Text
LEVEL B:
AutoCAD SHX Text
LEVEL A:
AutoCAD SHX Text
USA/DOD/AF70
AutoCAD SHX Text n
AutoCAD SHX Text 4G/Y10/S/**
AutoCAD SHX Text
UN0349
AutoCAD SHX Text u
AutoCAD SHX Text
PART OR DRAWING NO.
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text
MILITARY PRESERVATION IAW MIL-STD-2073
AutoCAD SHX Text
PRESERVATIVE: N/A
AutoCAD SHX Text
CLEANING & DRYING: IAW MIL-STD-2073
AutoCAD SHX Text
MARKING IAW MIL-STD-129
AutoCAD SHX Text
UNSERVICEABLE METHOD: 41
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
QUP
AutoCAD SHX Text
ICQ
AutoCAD SHX Text
MULTIPLE PART NUMBERS
AutoCAD SHX Text
ORIGINAL
AutoCAD SHX Text
CORD ASSEMBLY, DETONATING
AutoCAD SHX Text 18066
AutoCAD SHX Text
DATE
AutoCAD SHX Text
AUTH.
AutoCAD SHX Text
CHK.
AutoCAD SHX Text
1377-01-251-8522 ES
AutoCAD SHX Text
NATIONAL STOCK NO.
AutoCAD SHX Text
CURRENT
AutoCAD SHX Text
REV
AutoCAD SHX Text P.S.
AutoCAD SHX Text
ILL.
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
DODPOPHM/USA/DOD/AF70/TR17020
AutoCAD SHX Text
SHEET 1 OF 5
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text A
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
LEVEL A LEVEL B
AutoCAD SHX Text
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
LENGTH WIDTH DEPTH
AutoCAD SHX Text
VARIES
AutoCAD SHX Text 10 3/8
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
AS SPECIFIED BELOW AND BILL OF MATERIALS
AutoCAD SHX Text
SPEC STYLE TYPE CL VRTY GR TR
AutoCAD SHX Text
VARIES
AutoCAD SHX Text
CNTR I.D.
AutoCAD SHX Text
ITEM DIM
AutoCAD SHX Text
ITEM WT.
AutoCAD SHX Text
LEVEL A:
AutoCAD SHX Text
LEVEL B:
AutoCAD SHX Text
CNTR O.D.
AutoCAD SHX Text
LEVEL A:
AutoCAD SHX Text
LEVEL B:
AutoCAD SHX Text
GROSS CU FT
AutoCAD SHX Text
GROSS WT LBS
AutoCAD SHX Text
DESIGN FRAGILITY G
AutoCAD SHX Text
ASTM D6251
AutoCAD SHX Text
ASTM D5118
AutoCAD SHX Text
LEVEL
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text
PACKING
AutoCAD SHX Text 10 3/8
AutoCAD SHX Text
AutoCAD SHX Text 16 3/4
AutoCAD SHX Text
AutoCAD SHX Text 1.043
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
K. KNIGHTON S. OYLER D. HALE N. CORONADO
AutoCAD SHX Text F01-251-8522
AutoCAD SHX Text
D) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.
AutoCAD SHX Text
RSC
AutoCAD SHX Text
III
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text V3c
AutoCAD SHX Text
IAW: ASTM D1974 SEALING METHOD C
AutoCAD SHX Text
IAW: ASTM D6251
AutoCAD SHX Text
MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.
AutoCAD SHX Text
SERVICEABLE METHOD: 41
AutoCAD SHX Text
AutoCAD SHX Text
N.O.S. (HEXANITROSTILBENE(HNS))
AutoCAD SHX Text
E) COE: AF 18-251
AutoCAD SHX Text A
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
LTR
AutoCAD SHX Text
DATE
AutoCAD SHX Text A
AutoCAD SHX Text
UPDATED NOTICES AND DRAWING
21021
AutoCAD SHX Text
DD
AutoCAD SHX Text
FORM
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
REQD
AutoCAD SHX Text P/N
AutoCAD SHX Text
QTY
AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
SPECIFICATION
AutoCAD SHX Text
MATERIAL
AutoCAD SHX Text A/R A/R 1 A/R
AutoCAD SHX Text
TAPE, PACKAGING WRAP BAG, BARRIER CUSHIONING
AutoCAD SHX Text
3 X AS REQUIRED AS REQUIRED AS REQUIRED AS REQUIRED
AutoCAD SHX Text ASTM D5486 TYPE I OR V A-A-59135 CLASS 1, GRADE B MIL-DTL-117 TYPE I, CLASS F, STYLE 1 A-A-1898 GRADE II
AutoCAD SHX Text -4 -3 -2 -1
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SHEET 2 OF 5
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F01-251-8522
AutoCAD SHX Text
CORD ASSEMBLY, DETONATING
2. WRAP ENDS OF DETONATING CORD USING REF.-3, PLACE IN BARRIER BAG REF.-2. REMOVE AIR AND SEAL. USE
CUSHIONING REF.-1 TO PREVENT ITEMS FROM TOUCHING SIDES OF SHIPPING CONTAINER AND TO PREVENT ANY
MOVEMENT. USE PACKAGING TAPE REF.-4 TO SEAL SHIPPING CONTAINER.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED
CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE
SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER
PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND
STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND
THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE
ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND
STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 4: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL
HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
DD
AutoCAD SHX Text
2169C MOD
AutoCAD SHX Text
FORM
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SHEET 3 OF 5
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text F01-251-8522
AutoCAD SHX Text
2169C MOD
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
FORM
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
SHEET 4 OF 5
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F01-251-8522
AutoCAD SHX Text
CORD ASSEMBLY, DETONATING
AutoCAD SHX Text
HEAT SEAL
ITEM REFERENCE
LOADS OF AMMUNITION.
AutoCAD SHX Text
DD
AutoCAD SHX Text
2169C MOD
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
FORM
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
SHEET 5 OF 5
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
REQD
AutoCAD SHX Text P/N
AutoCAD SHX Text
QTY
AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
SPECIFICATION
AutoCAD SHX Text
MATERIAL
AutoCAD SHX Text 20 1 2 2 2 1
AutoCAD SHX Text EDGE PROTECTORS PLYWOOD STRAPPING, STEEL STRAPPING, STEEL STRAPPING, STEEL PALLET, 4-WAY ENTRY
AutoCAD SHX Text AS MANUFACTURED 48 X 41 5/8 X 3/8 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 40 X 48
AutoCAD SHX Text NSN 8135-00-145-0070 (OR EQUAL) A-A-55057 TYPE A ASTM D3953 TYPE 1, REG DUTY, FIN B, GRADE 2 ASTM D3953 TYPE 1, REG DUTY, FIN B, GRADE 2 ASTM D3953 TYPE 1, REG DUTY, FIN B, GRADE 2 MIL-DTL-15011 TYPE I, CLASS 1, STYLE 1
AutoCAD SHX Text -6 -5 -4 -3 -2 -1
AutoCAD SHX Text
40 BOXES @ 20 LBS NET PALLET WT PLYWOOD WT STRAPPING WT
AutoCAD SHX Text
AutoCAD SHX Text
800 LBS LBS 65 LBS LBS 16.95 LBS 1.40 LBSLBS
AutoCAD SHX Text
883.35 LBS
AutoCAD SHX Text
CUBE OF PALETIZED LOAD = 48.4
AutoCAD SHX Text
PALLETIZATION PROCEDURE FOR LEVEL B PACK
AutoCAD SHX Text
PALLETIZATION PROCEDURE FOR LEVEL B PACK
AutoCAD SHX Text F01-251-8522
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
1. MAY PACK UP TO 5 EACH ITEMS IN SHIPPING CONTAINER WITH CUSHIONING REF.-1 BETWEEN EACH ITEM.
2. WRAP ENDS OF DETONATING CORD USING REF.-3, PLACE IN BARRIER BAG REF.-2. REMOVE AIR AND SEAL. USE CUSHIONING REF.-1 TO PREVENT ITEMS FROM TOUCHING SIDES OF SHIPPING CONTAINER AS WELL A PREVENTING
ANY MOVEMENT.
3. SEAL CONTAINER USING REF.-4, ACCORDING TO THE DRAWING.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH THE PREVIOUS EDITION OF THIS SPI DO NOT REQUIRE
REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 4 : SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTICE 6: PALLETIZATION AND UNIT LOADS SHALL BE IAW MIL-STD-1660 FOR AMMUNITION AND EXPLOSIVES.
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
1. MAY PACK UP TO 5 EA ITEMS IN SHIPPING CONTAINER WITH CUSHIONING, REF.-1, BETWEEN EACH ITEM.
2. WRAP ENDS OF DETONATING CORD USING REF.-3, PLACE IN BARRIER BAG, REF.-2. REMOVE AIR AND SEAL. USE CUSHIONING, REF.-1, TO PREVENT ITEMS FROM TOUCHING SIDES OF SHIPPING CONTAINER AS WELL AS PREVENTING
ANY MOVEMENT.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 4: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTICE 6: PALLETIZATION AND UNIT LOADS SHALL BE IAW MIL-STD-1660 FOR AMMUNITION AND EXPLOSIVES.
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
1. MAY PACK UP TO 5 EA ITEMS IN SHIPPING CONTAINER WITH CUSHIONING, REF.-1, BETWEEN EACH ITEM.
2. WRAP ENDS OF DETONATING CORD USING REF.-3, PLACE IN BARRIER BAG, REF.-2. REMOVE AIR AND SEAL. USE CUSHIONING, REF.-1, TO PREVENT ITEMS FROM TOUCHING SIDES OF SHIPPING CONTAINER AS WELL AS PREVENTING
ANY MOVEMENT.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 4: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTICE 6: PALLETIZATION AND UNIT LOADS SHALL BE IAW MIL-STD-1660 FOR AMMUNITION AND EXPLOSIVES.
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 4: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTICE 6: PALLETIZATION AND UNIT LOADS SHALL BE IAW MIL-STD-1660 FOR AMMUNITION AND EXPLOSIVES.
NOTES
1. MAY PACK UP TO 5 EACH ITEMS IN SHIPPING CONTAINER WITH CUSHIONING REF.-1 BETWEEN EACH ITEM.
2. WRAP ENDS OF DETONATING CORD USING REF.-3, PLACE IN BARRIER BAG REF.-2. REMOVE AIR AND SEAL. USE CUSHIONING REF.-1 TO PREVENT ITEMS FROM TOUCHING SIDES OF SHIPPING CONTAINER AS WELL AS PREVENTING ANY
MOVEMENT. USE PACKAGING TAPE REF.-4 TO SEAL SHIPPING CONTAINER.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
����������� ���!�"#" ���$��%&'()&*+(&,-�.+(/,)&01%�(,�%,%�.-%�+2'2�%,%�3,-().3(,)'�,-456��.%7&-&'().(&81�,),91).(&,-.4�+'16�:;�.9)&4�;:<=2��,(/1)�)1>+1'('�?,)�(/&'�%,3+71-(�'/.44�*1�)1?1))1%�(,�@:A�'37'BC+4..6�D9.3E.C&-C%&8&'&,-F6�/&44�.?*6�+(./��=@:GA2�"����H��� � ���H"I��?,44,J�(/1�9),31%+)1'�&-�%,%�G;;:2;;K76�-.(&,-.4�&-%+'()&.4�'13+)&(5�9),C).7�,91).(&-C�7.-+.4D-&'9,7F6�'13(&,-�GKL:G6�,)�%,%�G;::2<K)6�&-?,)7.(&,-�'13+)&(5�9),C).76�3/.9(1)�8&2��?,)�+-34.''&?&1%6�4&7&(1%�%,3+71-('6%1'(),5�*5�.-5�71(/,%�(/.(�J&44�9)181-(�%&'34,'+)1�,?�3,-(1-('�,)�)13,-'()+3(&,-�,?�(/1�%,3+71-(2
#���$�%�#��%&���%�'%$'��(�$�)*+���%�#�%$+�,�%�-$��$�.#�#����(�#�),���/�01$�.#�#����(�2��'�)%34%5#�5�,%��$#%&�(�$�#���$�%�#��%&��$%'�!���������
| �� | ���� |
| �� | ��� |
| ! | |
| ������������� | "�� |
���6���7����!� ����8
| ����������������������!� | �����������������9����������� | |
| ������� | ��!���������������� | ���!�����!����!�!����!������� |
!���!�����8
��6�
| �� | ��!����6�� | 7�� | ��!� | |
| ���� | ����� |
| �!��6 | �7������!���������7��������� | |
| ������������������!������� | "�� | |
| ��: | ��!� |
| ���6���7���������� | ���!� |
| !�������������"�������� |
��������!�!���!���6�!7���!�� ���6�!�!��<=��������� ��!
!��7� ��!
����8
| ����� ����� | ��� | |
| !������� | ��� | ��� |
| ���� | ||
| ������!������� | ��� | |
| !!���6��� | 7��������������� | ���� |
�����6 ���������<7����@���
,-�#�#������#3��
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 19 JANUARY 2021. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406
SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
AutoCAD SHX Text
2169 MOD
AutoCAD SHX Text
DD
AutoCAD SHX Text
FORM
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPI NO. F01-016-3205
AutoCAD SHX Text
SPECIAL MARKINGS:
AutoCAD SHX Text
A) SPI NO. F01-016-3205
AutoCAD SHX Text
B) PROPER SHIPPING NAME: ARTICLES, EXPLOSIVE,
AutoCAD SHX Text
PACKAGING WAS MANUFACTURED.
AutoCAD SHX Text
C) UN POP MARKING:
AutoCAD SHX Text
**THE LAST TWO DIGITS OF THE YEAR DURING WHICH THE
AutoCAD SHX Text
CLOSURE:
AutoCAD SHX Text
LEVEL B:
AutoCAD SHX Text
LEVEL A:
AutoCAD SHX Text
USA/DOD/AF70
AutoCAD SHX Text n
AutoCAD SHX Text 4G/Y10/S/**
AutoCAD SHX Text
UN0349
AutoCAD SHX Text u
AutoCAD SHX Text
PART OR DRAWING NO.
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text
MILITARY PRESERVATION IAW MIL-STD-2073
AutoCAD SHX Text
PRESERVATIVE: N/A
AutoCAD SHX Text
CLEANING & DRYING: IAW MIL-STD-2073
AutoCAD SHX Text
MARKING IAW MIL-STD-129
AutoCAD SHX Text
UNSERVICEABLE METHOD: 41
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
QUP
AutoCAD SHX Text
ICQ
AutoCAD SHX Text
MULTIPLE PART NUMBERS
AutoCAD SHX Text
ORIGINAL
AutoCAD SHX Text
CORD ASSEMBLY, DETONATING
AutoCAD SHX Text 18068
AutoCAD SHX Text
DATE
AutoCAD SHX Text
AUTH.
AutoCAD SHX Text
CHK.
AutoCAD SHX Text
1377-01-016-3205 ES
AutoCAD SHX Text
NATIONAL STOCK NO.
AutoCAD SHX Text
CURRENT
AutoCAD SHX Text
REV
AutoCAD SHX Text P.S.
AutoCAD SHX Text
ILL.
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
DODPOPHM/USA/DOD/AF70/TR17020
AutoCAD SHX Text
SHEET 1 OF 5
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text A
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
LEVEL A LEVEL B
AutoCAD SHX Text
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
LENGTH WIDTH DEPTH
AutoCAD SHX Text
VARIES
AutoCAD SHX Text 10 3/8
AutoCAD SHX Text
SEE NOTICE 1
AutoCAD SHX Text
AS SPECIFIED BELOW AND BILL OF MATERIALS
AutoCAD SHX Text
SPEC STYLE TYPE CL VRTY GR TR
AutoCAD SHX Text
VARIES
AutoCAD SHX Text
CNTR I.D.
AutoCAD SHX Text
ITEM DIM
AutoCAD SHX Text
ITEM WT.
AutoCAD SHX Text
LEVEL A:
AutoCAD SHX Text
LEVEL B:
AutoCAD SHX Text
CNTR O.D.
AutoCAD SHX Text
LEVEL A:
AutoCAD SHX Text
LEVEL B:
AutoCAD SHX Text
GROSS CU FT
AutoCAD SHX Text
GROSS WT LBS
AutoCAD SHX Text
DESIGN FRAGILITY G
AutoCAD SHX Text
ASTM D6251
AutoCAD SHX Text
ASTM D5118
AutoCAD SHX Text
LEVEL
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text
PACKING
AutoCAD SHX Text 10 3/8
AutoCAD SHX Text
AutoCAD SHX Text 16 3/4
AutoCAD SHX Text
AutoCAD SHX Text 1.043
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
K. KNIGHTON S. OYLER D. HALE N. CORONADO
AutoCAD SHX Text F01-016-3205
AutoCAD SHX Text
D) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.
AutoCAD SHX Text
RSC
AutoCAD SHX Text
III
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text V3c
AutoCAD SHX Text
IAW: ASTM D1974 SEALING METHOD C
AutoCAD SHX Text
IAW: ASTM D6251
AutoCAD SHX Text
MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.
AutoCAD SHX Text
SERVICEABLE METHOD: 41
AutoCAD SHX Text
AutoCAD SHX Text
N.O.S. (HEXANITROSTILBENE(HNS))
AutoCAD SHX Text
E) COE: AF 18-251
AutoCAD SHX Text A
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
LTR
AutoCAD SHX Text
DATE
AutoCAD SHX Text A
AutoCAD SHX Text
UPDATED NOTICES AND DRAWING
21021
AutoCAD SHX Text
DD
AutoCAD SHX Text
FORM
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
REQD
AutoCAD SHX Text P/N
AutoCAD SHX Text
QTY
AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
SPECIFICATION
AutoCAD SHX Text
MATERIAL
AutoCAD SHX Text A/R A/R 1 A/R
AutoCAD SHX Text
TAPE, PACKAGING WRAP BAG, BARRIER CUSHIONING
AutoCAD SHX Text
3 X AS REQUIRED AS REQUIRED AS REQUIRED AS REQUIRED
AutoCAD SHX Text ASTM D5486 TYPE I OR V A-A-59135 CLASS 1, GRADE B MIL-DTL-117 TYPE I, CLASS F, STYLE 1 A-A-1898 GRADE II
AutoCAD SHX Text -4 -3 -2 -1
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SHEET 2 OF 5
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F01-016-3205
AutoCAD SHX Text
CORD ASSEMBLY, DETONATING
2. WRAP ENDS OF DETONATING CORD USING REF.-3, PLACE IN BARRIER BAG REF.-2. REMOVE AIR AND SEAL. USE
CUSHIONING REF.-1 TO PREVENT ITEMS FROM TOUCHING SIDES OF SHIPPING CONTAINER AND TO PREVENT ANY
MOVEMENT. USE PACKAGING TAPE REF.-4 TO SEAL SHIPPING CONTAINER.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED
CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE
SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER
PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND
STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND
THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE
ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND
STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 4: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL
HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
DD
AutoCAD SHX Text
2169C MOD
AutoCAD SHX Text
FORM
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SHEET 3 OF 5
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text F01-016-3205
AutoCAD SHX Text
2169C MOD
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
FORM
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
SHEET 4 OF 5
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F01-016-3205
AutoCAD SHX Text
CORD ASSEMBLY, DETONATING
AutoCAD SHX Text
HEAT SEAL
ITEM REFERENCE
LOADS OF AMMUNITION.
AutoCAD SHX Text
DD
AutoCAD SHX Text
2169C MOD
AutoCAD SHX Text
MARCH 87
AutoCAD SHX Text
FORM
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
SHEET 5 OF 5
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98747
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
REQD
AutoCAD SHX Text P/N
AutoCAD SHX Text
QTY
AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
SPECIFICATION
AutoCAD SHX Text
MATERIAL
AutoCAD SHX Text 20 1 2 2 2 1
AutoCAD SHX Text EDGE PROTECTORS PLYWOOD STRAPPING, STEEL STRAPPING, STEEL STRAPPING, STEEL PALLET, 4-WAY ENTRY
AutoCAD SHX Text AS MANUFACTURED 48 X 41 5/8 X 3/8 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 40 X 48
AutoCAD SHX Text NSN 8135-00-145-0070 (OR EQUAL) A-A-55057 TYPE A ASTM D3953 TYPE 1, REG DUTY, FIN B, GRADE 2 ASTM D3953 TYPE 1, REG DUTY, FIN B, GRADE 2 ASTM D3953 TYPE 1, REG DUTY, FIN B, GRADE 2 MIL-DTL-15011 TYPE I, CLASS 1, STYLE 1
AutoCAD SHX Text -6 -5 -4 -3 -2 -1
AutoCAD SHX Text
40 BOXES @ 20 LBS NET PALLET WT PLYWOOD WT STRAPPING WT
AutoCAD SHX Text
AutoCAD SHX Text
800 LBS LBS 65 LBS LBS 16.95 LBS 1.40 LBSLBS
AutoCAD SHX Text
883.35 LBS
AutoCAD SHX Text
CUBE OF PALETIZED LOAD = 48.4
AutoCAD SHX Text
PALLETIZATION PROCEDURE FOR LEVEL B PACK
AutoCAD SHX Text
PALLETIZATION PROCEDURE FOR LEVEL B PACK
AutoCAD SHX Text F01-016-3205
1. CUSHION SHARP EDGES OR ENDS AS NEEDED USING REF.-3. PLACE IN BARRIER BAG REF.-2, REMOVE AIR AND SEAL.
2. BARRIER BAG REF.-2 WILL VARY TO SUIT EACH ITEM IN THE KIT.
3. PLACE THE BAGGED ITEM IN THE SHIPPING CONTAINER USING CUSHIONING REF.-1 TO PREVENT ANY LINE FROM TOUCHING THE CONTAINER WALL. ALSO USE TO PROVIDE A SNUG FIT AND PREVENT MOVEMENT.
4. SEAL CONTAINER USING REF.-4, THEN REINFORCE USING REF.-5, ACCORDING TO THE CLOSURE DRAWING.
5. SINCE THE EX LETTER ACTS AS THE CAA, THE EX LETTER NUMBER MUST BE MARKED ON THE OUTSIDE OF THE
CONTAINER. THE EX LETTER MUST ALSO ACCOMPANY THE SHIPMENT.
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 3: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTICE 4: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING.
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .