SPI - FND165348L_A1 PN 60244-45100-10.pdf

This is a Special Packaging Instruction document specifying requirements for packaging a Power Control Unit (Part No. 60244-45100-10, National Stock No. 5895-ND-165-348L). The document details two packaging levels (Level A and Level B) using ASTM D 6251 specifications with identical configurations: 21.90 gross cubic feet, 160 gross weight pounds, and design fragility rating of 110. Both levels require containers with interior dimensions of 52 3/4 inches length by 25 inches width by 20 inches depth, and exterior dimensions of 55 inches length by 27 1/4 inches width by 25 1/4 inches depth. The item itself measures 40 3/4 by 13 by 8 inches and weighs 100 pounds.

Preservation requirements follow IAW MIL-STD-2073-1 with serviceable method 10 and unserivable method 10. Cleaning and drying follow IAW MIL-STD-2073-1, and marking follows IAW MIL-STD-129. The packaging includes reusable containers that must not be destroyed and are not authorized for outside storage. Special requirements mandate that all wooden lumber, pallets, and containers be constructed from debarked, heat-treated wood (56 degrees Centigrade or 133 degrees Fahrenheit for 30 minutes minimum) with certification from an accredited agency. Phytosanitary documentation is required per ISPM No. 15 and DOD 4140.01-M-1 compliance. All voids must be filled with cushioning to prevent movement. Sheet 2 specifies component cushioning materials: top and bottom cushioning (24 x 25 x 6 inches), side cushioning (24 x 9 x 6 inches), and end cushioning (25 x 21 x 6 inches), all per specification A-A-59136.