SPI AK12005821.pdf
PDF 157 KB Posted
- Solicitation number
- PANDTA-26-P-032936
- Issued by
-
Department of the Army
About this file
This is a DD Form 2169, Special Packaging Instruction, for the Diffuser Assembly (Part Number 12324202, CAGE Code 19207, National Stock Number 2540-01-200-5821). The document provides detailed packaging specifications for a single unit item weighing 17.5 pounds with unit pack dimensions of 21.0 x 14.2 x 12.5 inches. The part requires military preservation using MIL-STD-2073-1D Method 32, including cleaning and drying per MIL-STD-2073-1D standards.
The packaging instructions specify two levels of containment. Level A packaging requires a cleated plywood box conforming to ASTM-D6251, Type III, Class 1, while Level B uses the unit container sealed and reinforced per ASTM-D1974, Method 2C or 2D. The internal packing configuration includes wrapping the part with a 60 x 24 polyethylene wrap, creating two corrugated rollups, and placing three protective pads within a corrugated container before sealing with a heat-sealed bag and outer corrugated shipping container. Marking must comply with MIL-STD-129. The bill of materials specifies nine items including polyethylene wrap, corrugated rollups and pads, corrugated containers, a thermoplastic bag, and all materials conforming to referenced ASTM and military specifications. When total shipment weight exceeds 125 pounds to the same destination, exterior packs without skids must be palletized per MIL-HDBK-774 guidance.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| BOAST RFOP_Diffuser Assembly Amendment 002.xlsx | XLSX spreadsheet | |
| BOAST RFOP_Diffuser Assembly Amendment 001.xlsx | XLSX spreadsheet | |
| BOAST RFOP_Diffuser Assembly.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC/TB
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12324202 (19207) DIFFUSER ASSEMBLY 19207 AK12005821
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
2540-01-200-5821 09-10-2002 C
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
1 EA NONE 17.5 2.157 21.0 X 14.2 X 12.5
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 32
13. CLEANING SEE NOTES
MIL-STD-2073-1D
14. DRYING
MIL-STD-2073-1D
15. PACKING
a. LEVEL A
MIL-STD-2073-1D AND NOTE I
b. LEVEL B
MIL-STD-2073-1D AND NOTE I
16. MARKING
MIL-STD-129
17. NOTES / DRAWING
A REFER TO THE BILL OF MATERIALS FOR CIRCLED NUMBERS AND REFERENCED ITEM NUMBERS ON THE
ACCOMPANYING PAGES.
B. PREPARE PART BY PLACING TURRET AIRFLOW CONTROL HANDLE IN CLOSED POSITION BEFORE
WRAPPING.
C. WRAP PART WITH WRAP, ITEM 1, AND SECURE WITH TAPE.
D. PREPARE PADS, ITEMS 4, 5 AND 6, AND PLACE INTO CONTAINER, ITEM 7, AS ILLUSTRATED ON PAGE 3.
E. PREPARE ROLLUPS, ITEMS 2 AND 3, AND PLACE INTO CONTAINER, ITEM 7, AS ILLUSTRATED ON PAGE 3.
F. CLOSE CONTAINER, ITEM 7, IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
G. CLOSE BAG, ITEM 8, BY HEAT SEALING.
H. CLOSE CONTAINER, ITEM 9, IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.
I. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO
ASTM-D6251, TYPE III, CLASS 1.
LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND
REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.
FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME
DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED.
MIL-HDBK-774 MAY BE USED FOR GUIDANCE.
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Pages
J. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH
MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12324202 (19207) DIFFUSER ASSEMBLY 19207 AK12005821
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
2540-01-200-5821 09-10-2002 C
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 4 Pages
19-7/8
24-7/8
31-1/2
SCORE
FLUTE
DIRECTION
2-3/4
2-5/8
14-3/4
17-3/8
29-1/2
44-1/8
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12324202 (19207) DIFFUSER ASSEMBLY 19207 AK12005821
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 4 Pages
WRAP, BAG AND UNIT CONTAINER ARE NOT
SHOWN FOR CLARITY.
P/N: 12324202
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12324202 (19207) DIFFUSER ASSEMBLY 19207 AK12005821
BILL OF MATERIALS
ITEM
NUMBER
DESCRIPTION
SIZE
SPECIFICATION DATA
QTY.
1 WRAP 60 X 24 A-A-3174, POLYETHYLENE, 4 MIL. 1
2 ROLLUP SEE PAGE 2 ASTM-D4727, TYPE CF, CLASS D,
VARIETY SW, GRADE 275.
3 ROLLUP SEE PAGE 2 ASTM-D4727, TYPE CF, CLASS D,
VARIETY SW, GRADE 275.
4 PAD 11-1/4 X 5 X 14-3/8 ASTM-D5118, TYPE CF, CLASS D,
STYLE RSC, VARIETY SW, GRADE 275.
5 PAD 8-3/8 X 3-1/2 X 13-5/8 ASTM-D5118, TYPE CF, CLASS D,
STYLE RSC, VARIETY SW, GRADE 275.
6 PAD 6-1/2 X 9 ASTM-D4727, TYPE CF, CLASS D,
VARIETY TW, GRADE 1100.
7 CONTAINER 20-3/8 X 11-7/8 X
13-1/8
ASTM-D5118, TYPE CF, CLASS D,
STYLE RSC, VARIETY DW, GRADE 350.
8 BAG 29 X 40 MIL-DTL-117, TYPE II, CLASS C,
STYLE 2.
9 CONTAINER 21 X 12-1/4 X 13-3/4 ASTM-D5118, TYPE CF, CLASS WR,
STYLE RSC, VARIETY SW, GRADE 350.
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 4 Pages
File details come from the government source that posted it. Updated .