SPECS B2727895 FOR REFERENCE ONLY .pdf

Physical

Item Specification

Size (H × W × D) 5.25 × 9.50 × 11.50 in (13.3 × 24.1 × 29.2 cm)

Weight 6.7 lb (3.1 kg), including batteries

Ingress protection IP55 (dust-protected and protected against water jets)

Display Optional LCD with moving bar, 2.6 × 1.3 in (6.6 × 3.3 cm); optional 2.6 s ECG window at 25 mm/s

Defibrillator

Waveform ZOLL Rectilinear Biphasic

Energy (factory default)

Adult: 120 J, 150 J, 200 J. Pediatric (Pedi-padz II): 50 J, 70 J, 85 J. Energy follows the electrode type connected. Configurable within rules (each shock same or higher than previous).

Charge time Less than 10 seconds with new batteries

Charge hold time 30 seconds

Patient impedance range

0–300 ohms

Patient safety All patient connections electrically isolated; defibrillation-protected ECG circuitry

Shockable rhythms (typical)

VF with average amplitude >100 µV; wide-complex VT >150 BPM (adult) or >200 BPM (pediatric)

Power

Batteries 10 user-replaceable Type 123A lithium manganese dioxide photo-flash cells (off-the-shelf, e.g. Duracell)

Capacity (typical new, 20 °C)

About 5 years standby, or ~225 shocks, or ~13 hours continuous monitoring

End-of-life indication Red X in status window (typically ~9 shocks remaining)

Electrodes

• CPR-D-padz: one-piece adult electrodes with integrated CPR sensor; ~5-year shelf life; cable ~48 in (1.2 m)

• Pedi-padz II: pediatric (generally under 8 years or <25 kg / 55 lb)

• Stat-padz II also compatible

Real CPR Help (depth/rate feedback) requires CPR-D-padz and is intended for adult victims.

CPR feedback (Real CPR Help)

• Adaptive metronome, typically 60–100 CPM (designed to support AHA/ERC target rates)

• Compression depth sensing range commonly listed as 1.9–8.9 cm (¾–3.5 in)

• Voice and visual prompts such as “PUSH HARDER” / “GOOD COMPRESSIONS”

Self-test and readiness

• Automatic self-test configurable every 1–7 days (default 7 days)

• Monthly full-energy (200 J) test

• Checks battery, electrode connection, ECG and charge/discharge circuits, microprocessor, CPR circuitry/sensor, and audio Environment

Item Typical specification (PS / standard models)

Operating temperature 32° to 122°F (0° to 50°C)

Storage temperature About −22° to 140°F (−30° to 60°C); some aviation/PS listings go to 158°F / 70°C

Humidity 10–95% RH, non-condensing

Shock IEC 68-2-27; 100 G

Vibration MIL-STD-810F, minimum helicopter test

Altitude −300 to 15,000 ft (−91 to 4,573 m)

Data and connectivity

• Records ECG and CPR data (capacity depends on configuration; examples include several hours of ECG/CPR, or ~20 minutes when audio recording is enabled)

• IrDA port for configuration and event download

• PC software historically specified for Windows (not Mac)

Standards (typical listings) Meets applicable requirements of IEC 60601-1, IEC 60601-2-4, AAMI/ANSI DF-39, and related EMC/safety standards. Classification is commonly Class II, internally

JL Industries

Model # :WBB765034

MPN #: C1413F12

JL Industries AED Cabinet Surface Mount, 85 db Audible Alarm, Steel https://www.globalindustrial.com/shopbybranditems?cp=0&p=~brand=JL%20Industries

Write a Review

Questions & Answers (0) Shop All Defibrillator/AED Cabinets & Accessories

Product Description JL AED cabinets fit most AED's on the market. These durable powder coat painted cabinets are equipped with audible 85 db alarm and available in fully recessed, semi recessed or surface mount.

Features:

• CRS with white powder coat finish

• 1-3/4" Trim on face and door

• Mounted in a 5/8" door stop and attached by a continuous hinge

See Less Deta

Contents Description Piece Count

AED Instruction Card 1 Bandage Shears 1

BZK Antiseptic Towelettes 2 CPR Face Shield 1 Disposable Razor 1 Emergency Blanket 1 https://www.globalindustrial.com/c/medical-lab/medical_devices_instruments/defibrillator_accessories?pGid=51185&cid=72045#PG-72045-51185

Nitrile Exam Gloves 2