Specifications_Trade_Labor_Services_7.27.26.pdf

City of New Haven

Trade Labor Services Project Number 26-085-01

Department of Engineering 6-15-2026

Contents Solicitation Summary:

Notice to Contractor

Instructions to Bidders

Pricing Options

Description of Services

Description of Services

Licenses

Wage Rates

Insurance and Bonds

Subcontractor Identification Requirement

Project Coordination

Work Site conditions

Storage of Materials, Tools, and Equipment

Material Markup

Warranty

City of New Haven Section 12 ¼ and 12 ½

Carpenters:

Drywall Installer and Finisher:

Electricians (Commercial):

Fence Services:

Fire Alarm Services:

Flooring:

General Laborer:

Glaziers:

Heating & Air Conditioning:

Insulation Installer:

Masonry Services:

Painters:

Plumbers:

Roofing Services:

Security/Data Services-Electrical:

Siding:

Sprinkler Fitters:

Welding Fabrication:

Solicitation Summary:

This solicitation is for various trade labor services for future projects funded by various sources administered by the City of New Haven. Projects and scopes will vary in nature and size. Contract will allow the City to solicit quotes from trades on various projects based on the rate schedule or fixed quote from this solicitation.

Project scopes are yet to be determined and not available at the time of bid. Contractors will be required to follow the City’s contract award process to obtain a Trade Labor Contract. Upon execution of the contract, the vendor may provide quotes to City Departments based on a provided Statement of

Work (SOW). A purchase order will be required for each SOW prior to the start of any work.

Notice to Contractor The City reserves the right to award contracts to multiple bidders for a given trade. The City reserves the right to award multiple contracts at the rates bid by the contractor(s). This is the sole discretion of the

City of New Haven. This solicitation does not guarantee any amount of work to any Contractor.

Instructions to Bidders Contractors may bid on one or multiple trades if they meet the qualifications to perform the work.

Contractors shall not bid on trades that they are not qualified to perform. All bid items must be completed in a particular trade to be considered responsive for that trade.

Pricing Options This solicitation shall provide two methods of pricing: 1. Fixed, All-inclusive Quote 2. Hourly Rate and

Material Markup Quote

Fixed, All-Inclusive Quote

Based on the discretion of the City of New Haven, a fixed quote based on Statement of Work (SOW) shall be provided as a fixed, all-inclusive flat rate price to perform the described work in its entirety. The fixed price must encompass all labor, materials, equipment, tools, transportation, overhead, profit, and any other costs necessary to perform the work in full compliance with Contract. Quotes shall be binding and valid for the term specified in the Purchase Order. When using Fixed Pricing Quotes, no additional markup is permitted beyond the purchase order amount.

Hourly Rate and Material Markup Quote

Based on the discretion of the City of New Haven, an hourly quote based on the Statement of Work (SOW) shall be provided as an estimate of the number of labor hours to complete the SOW as well as estimate of material cost and included fifteen percent (15%) markup on actual material costs. The City may request a Not to Exceed (NTE) amount prior to issuance of a purchase order. In the event of a NTE amount being required, the contractor shall notify the City when the scope approaches the NTE amount.

Any work performed beyond the NTE amount requires written approval by the City. Any work exceeding the NTE amount without written approval by the City will not be compensated.

At the discretion of the city, Hourly Rate and Material services with an undefined Statement of Work may be requested. Such work may only proceed with written authorization from the City of New Haven.

This is typically reserved for emergency work or repairs with an undetermined scope at the time of need. The City may issue a NTE amount and reserves the right to end the services or switch to a Fixed Quote when a Statement of Work is able to be determined.

Description of Services

Description of Services The Contractor shall perform trade work as requested by The City of New Haven based on an agreed upon scope of services provide by the City through a written description or plans and specifications. The

Contractor shall provide a quote to the City based on the “Pricing Options” section of these specifications.

The Contractor may not begin work until the City issues a written Notice to Proceed and provides a

Purchase Order.

All City of New Haven General Conditions and Ordinances are applicable. All applicable local, state, and federal laws, rules, and regulations must be followed.

Licenses The Contractor(s) shall have all required licenses to Perform the Services in the State for the specified scope of work. The Contractor shall notify the City if they do not have proper licensure for a particular scope of work. Contractor shall immediately notify the City by written notice in the event any license expires or is revoked at any time during the term of this Contract. The Contractor’s employees shall carry their licenses and photo identification at all times with them when performing any Services which clearly identifies them as properly licensed or otherwise qualified employees or subcontractors of the

Contractor. The Contractor shall provide copies of each employee’s license to the City upon request.

Wage Rates Contractors shall bid based on the solicitation calculation sheet, which includes hourly rates based on minimum Stage Wage Rates, Livable City Wage Rates, and Overtime wage rates. Contractors must provide an hourly rate equal to or greater than the minimum required rate for the respective Wage

Rates.

Overtime wage rates shall only be used during work agreed upon with the City to be performed after standard work hours. The authorization for Overtime wage rates must be provided by the City in writing prior to the start of work.

Insurance and Bonds Insurance requirements shall conform to the City of New Haven Insurance requirements as described on the City’s purchasing website. Insurance requirements for City vendors and contractors | New Haven, CT

Insurance requirements will be provided to the contractor with the Statement of Work. Contractor shall provide the required insurance prior to the issuance of a purchase order. Insurance requirements are subject to change per the Scope of Work.

If insurance bonds are required, the City shall provide the bonding requirements with the Statement of

Work. Bonding, if required, shall be provided prior to the issuance of a purchase order.

Subcontractor Identification Requirement All bidders must disclose any intended use of subcontractors in their quote submission. Include the name of each subcontractor, trade or scope of work to be performed, and their anticipated role in the project. Contractors are responsible for ensuring all subcontractor costs are included in the fixed, all-https://www.newhavenct.gov/government/departments-divisions/purchasing-division/insurance inclusive quote. Certified payroll reporting will be required for any subcontracted work subject to prevailing wage. Subcontractor requirements may be subject to review and requirements of the City of

New Haven Section 12 ¼ and 12 ½ ordinances.

Project Coordination The scope of services may be part of a larger project and thus requires coordination with other trades and professional services. The coordination of this work shall be reviewed prior to the start of work, and the City will make reasonable efforts to maintain that coordination with all applicable trades and services.

Work Site conditions Contractors shall complete all aspects of the Service in a safe manner. The Contractor shall, at its sole expense, immediately correct any dangerous condition caused by or as a result of the Contractor’s or

Contractor’s employees, officers, agents and subcontractors’ actions. The Contractor shall immediately notify the Client Agency’s authorized representative when any perceived dangerous condition exists.

The Contractor shall clean and broom sweep the work site at the end of each work day. The Contractor shall remove all debris from the work site on a daily basis and shall keep existing walkways, driveways, parking areas and storage areas free of debris and otherwise clean at all times. The Contractor shall not store any hazardous materials and combustible waste at the work site. The Contractor shall utilize a

General Laborer or an Apprentice to maintain the conditions of the work site.

Any damages caused by the Contractor or their employees shall be corrected without incurring additional expense to the City.

Storage of Materials, Tools, and Equipment The Contractor shall store all materials, tools and equipment only in areas designated approved by the

City. The Contractor shall keep storage areas clean and clear of hazardous materials and combustible waste. All materials stored outside of the City’s facility shall be stored off the ground on adequate support and protected with secure tarpaulins, at the Contractor’s sole cost.

The Contractor shall provide adequate facilities for the storage of waste materials, rubbish, debris and surplus materials and equipment which the Contractor shall remove from the work site location when the Service is completed.

The Contractor shall not leave any materials, tools or equipment unattended. The safety and security of the Contractor’s materials, tools and equipment is the sole responsibility of the Contractor.

The Contractor shall be responsible for the protection and security of any material not fully installed and accepted by the City. The risk of loss, and the sole responsibility, for all Contractor’s materials, tools and equipment is that of the Contractor and not the Client Agency. The Contractor shall remove all materials, tools and equipment, within ten (10) days after the termination or expiration of this Contract.

Material Markup Quotes provided by the Contractor shall have a separate line item for material costs including a 15% markup. Upon request, the contractor shall provide the City the actual cost from the applicable suppliers. Material markup is not applicable in the event of Fixed Price Quote.

In the event material is provided by the City, there will be no cost for markup included.

Warranty Warranty shall be 1 year on All services against defects and workmanship per the City’s General

Conditions.

Warranty on material provided by the City is limited to defects due to workmanship only. All warranty claims within 1 year shall be handled by the contractor that the purchase order was issued to. Any manufacturer warranty requirements by suppliers or manufacturers (such as product registrations) are the responsibility of the contractor.

City of New Haven Section 12 ¼ and 12 ½

All local, state, and federal ordinances are in effect for this contract, including the Chapter 12¼ - SMALL

CONSTRUCTION BUSINESS DEVELOPMENT PROGRAM[1] and Chapter 12½ - EQUAL OPPORTUNITIES[1]

Refer to the latest City ordinances as found in the City of New Haven Code of Ordinances Mini TOC:

TITLE III - CODE OF GENERAL ORDINANCES | Code of Ordinances | New Haven, CT | Municode Library

New Haven Code of Ordinances 12 1/4

The City of New Haven reserves the right to review and set the expectations of the section 12 ¼

Subcontractor hiring requirements based on the Statement of Work that align with City Requirements and Overall project goals. Pre award meeting to review the requirements may be required as identified in the Statement of Work.

https://library.municode.com/ct/new_haven/codes/code_of_ordinances?nodeId=TITIIICOGEOR https://library.municode.com/ct/new_haven/codes/code_of_ordinances?nodeId=TITIIICOGEOR

Carpenters:

33.7.1. Carpenter, Working Supervisor

License or Registrations Requirements: As required by DCP.

Duties: Supervises and coordinates activities of workers engaged in the construction, installation, and repair of structures and fixtures. Layout and install metal studs, hang tape sheetrock, install grid work and ceiling tiles. Read blueprints. Lays out floor plan and cabinetwork, using rule, square, and calipers.

Selects materials and structural units including lumber, prefabricated doors, cabinets and paneling, and inspects to insure conformance with provisions of building code and local ordinance. Determines sequence of activities concerned with fixture assembly, and erection of structure. Assigns workers to such tasks as cutting materials to size, building concrete forms, erecting wood framework, and laying flooring, surface sanding and application of surface sealant. Inspects work performed by subcontractors, including ductwork, wiring, and pipe installation to insure conformance with specifications. Supervise workers engaged in building structures such as cofferdams, trestles, and supports for concrete forms.

Prepares cost estimates.

Constructs, erects, installs and repairs structures and fixtures of wood, plywood and wallboard. Installs, assembles, dismantles, moves industrial machinery. Drives piling into ground to provide foundations for structures such as buildings and bridges, retaining walls for earth embankments, such as cofferdams.

Fastens wooden, metal or rock board lath to walls, ceilings and partitions of buildings, acoustical tile layer, and concrete form builder. Applies fire stopping materials on fire resistive joint systems only.

Installation of curtain/window walls only where attached to wood or metal studs. Installation of insulated material of all types whether blown, nailed or attached in other ways to walls, ceilings and floors of buildings. Assembly and installation of modular furniture/furniture systems. Free-standing furniture is not covered. This includes free standing: student chairs, study top desks, book box desks, computer furniture, dictionary stand, atlas stand, wood shelving, two-position information access station, file cabinets, storage cabinets, tables, etc.

33.7.2. Construction Carpenter

License or Registrations Requirements: As required by DCP.

Duties: Study specifications in blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required. Build or repair cabinets, doors, frameworks, floors, and other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, and power tools. Install structures and fixtures, such as windows, frames, floorings, and trim, or hardware, using carpenter's hand and power tools. Select and order lumber and other required materials. Maintain records, document actions and present written progress reports. Finish surfaces of woodwork or wallboard in houses and buildings, using paint, hand tools, and paneling. Prepare cost estimates for clients or employers. 33.7.3. Carpenter, Common Laborer License or Registrations Requirements: As required by DCP. Duties: Performs any combination of duties on construction projects, usually working in utility capacity, by transferring from one task to another where demands require worker with varied experience and ability to work without close supervision.

33.7.4. Carpenter, Rough & Finish

License or Registrations Requirements: As required by DCP.

Duties: Constructs, erects, installs, and repairs structures and fixtures using carpenter’s hand tools and power tools, and conforming to local building codes: studies blueprints, sketches, or building plans for information pertaining to type of materials required, and dimensions of structures and fixtures to be fabricated. Selects specified type of materials. Prepares layout, using rules, framing square, and calipers.

Marks cutting assembly lines on materials, using pencil, chalk, and marking gauges. Shapes materials to prescribed measurements, using saws, chisels, and planes. Assembles cut and shaped materials and fastens them together with nails, dowel, pins or glue. Verifies trueness of structure using plumb bob and carpenter’s level. Erects framework for structures and lays subflooring. Builds stirs and lays out and installs partitions and cabinet work. Covers subfloor with building paper to keep out moisture and lays hardwood, parquet, and wood-strip-block floors by nailing to subfloor or cementing them to mastic or asphalt base. Applies shock-absorbing, sound-deadening and decorative paneling to ceilings and walls.

Fits and installs prefabricated window frames; doors, door weather stripping, interior and exterior trim and finish hardware including locks, letter drops and kick plates. Constructs forms and chutes for pouring concrete. Erects scaffolding and ladders for assembling structures above ground level. Layout and installation of metal studs, and tape sheetrock, install ceiling grid work and ceiling tiles.

Drywall Installer and Finisher:

Duties: Provided quality drywall installation for both commercial and residential projects. Read blueprints, technical specification to install materials correctly. Installing drywall to building codes, apply texturing and compound for walls and ceilings, sanding of rough spots. Apply plaster and other construction materials, ensuring quality of work was as per specifications and met or exceeded all installation and finished product guidelines.

Electricians (Commercial):

License required: As Required by DCP

Duties: Install, erect, maintenance, alteration or repair of any wire, cable, conduit, etc., which generates, transforms, transmits or uses electrical energy for light, heat, power or other purposes, including the installation or maintenance of telecommunication, network wiring, and low voltage wiring.

33.22.1. Electrician, Working Supervisor:

Duties: Installs, erects, maintains, alters or repairs any wire, cable, conduit, busway, raceway, support, insulator, conductor, appliance, apparatus, fixture or equipment which generates, transforms, transmits or uses electrical energy for light, heat, power or other purposes including the installation or maintenance of telecommunication, network wiring, and low voltage wiring. Coordinate, layout, and oversee the work of others.

33.22.2. Electrician, Journeyperson Electrician:

Duties: Same work as an E-1 licensee, but only while in the employment of a Contractor licensed for such work.

33.22.3. Electrician, Apprentice:

Duties: Same work as an E-1 or E-2 licensee, but only with direct supervision of an Electrical Contractor licensed through DCP.

Fence Services:

License or Registrations Requirements: As required by DCP

Duties: Supervises and coordinates activities involved in chain link fence installation, replacement and repair of metal fencing surrounding institutional establishments and residential locations using equipment and tools required to complete the work.

Fire Alarm Services:

Duties: Install, erect, maintenance, alteration or repair of any fire alarm system for City facility. Must be licensed and capable to procure and work with the major fire alarm system distributors (Notifier, Fire-

Lite, etc).

Flooring:

Duties: Install, erect, maintenance, alteration or repair flooring of various types such as LVT, Tile, hardwood, carpet, epoxy, or other typical commercial flooring systems. Installation and preparation work shall be per industry standards and manufacturer’s recommendation.

General Laborer:

Duties: Cleaning and preparing a job site including sweeping, wash down, mopping, wiping of the construction facility and its furniture, washing, polishing, and dusting. Loading and delivering materials, and using a variety of tools and machines such as blowtorches, forklifts, levels, lifts, power drills, grinders, saws, pressure washers, and water spraying equipment. Set up and take down ladders, scaffolding, and other temporary structures. Work with carpenters, masons, and other specialized contractors.

Glaziers:

License Requirements: As required by DCP:

FG-1 – (Unlimited Contractor’s license for Flat Glass Work)

The holder of this license may perform the installation, maintenance, or repair of glass in residential or commercial structures. Glazing wood and metal sash, doors, partitions, and 2 story aluminum storefronts. Installs glass windows, skylights, store fronts and display cases or surfaces such as building fronts, interior walls, ceilings and table tops and metal store fronts.

FG-2 – (Unlimited Journeyperson’s License for Flat Glass Work)

The holder of this license may perform the installation, maintenance, or repair of glass in residential or commercial structures only while in the employ of a Contractor licensed for such.

Duties: Follow blueprints and specifications, Remove any old or broken glass before installing replacement glass, cut glass to the specified size and shape, using measuring tape, plumb lines, and levels to ensure proper fitting installation. Make or install sashes and moldings for glass installation, fasten glass into sashes or frames with clips, moldings, or other types of fasteners, add weather seal or putty around pane edges to seal joints.

Install or replace windows, mirrors, shower doors, and bathtub enclosures. Fit glass for tabletops and display cases. Install items such as room dividers and security windows.

Heating & Air Conditioning:

Duties: Installing, servicing and repairing of gas or oil burners for domestic and light commercial installations. Installation, repair, replacement, maintenance or alteration of any warm air, air conditioning and refrigeration system, including necessary piping for the conveyance of heating or cooling media and associated pumping equipment. Installation, repair, replacement, maintenance or alteration of all refrigeration systems included in food storage, air conditioning, or special process systems. Installation, repair, replacement, alteration, and maintenance of gas piping systems and approved gas appliances, gas utilization equipment and accessories for use with LP gas supplied by gas containers and/or natural gas. Installation, repair, replacement, maintenance or alteration of any apparatus of piping, appliances, devices or accessories for heating systems, boilers, including apparatus and piping for the generation or conveyance of steam and associated pumping equipment and oil burner installation and servicing, installation of hot, chilled and condenser water, as well as steam piping in air conditioning systems.

License Requirement: As required by DCP

Insulation Installer:

Duties: Installing blown-in insulation, batted rolled insulation, foam insulation and insulation. Install insulation for soundproofing, fire stopping systems, insulate pipes, sprinkler pipes, plumbing pipes, heating pipes HVAC ducts, ceilings.

Masonry Services:

33.14.1. Bricklayer:

Duties: Lays building materials, such as brick, structural tile and concrete cinder, glass, gypsum, terra cotta block.to construct or repair walls, partitions, arches, sewers, and other structures: Cuts, tools and sets marble, sets stone, finishes concrete, applies decorative steel, aluminum and plastic tile, applies cements, sand, pigment and marble chips to floors, stairways, etc. Measures distance from reference points and marks guidelines on working surface to lay out work. Spreads soft bed of mortar that serves as bed and binder for block. Levels, aligns and embeds brick into mortar. Removes excess from face of block and finishes with pointing tool or trowel. Determines vertical and horizontal alignment of courses, using plumb bob, gauge line and level. Fastens brick to terra cotta veneer to face of structures, with tie wires embedded in mortar between bricks, or in anchor holes in veneer brick. May weld metal parts to steel structural members. May apply plaster to walls to complete work.

33.14.2. Cement Mason:

Duties: Smooths and finishes surfaces of poured concrete floors, walls, sidewalks or curbs to specified textures using hand tools or power tools, including floats, trowels and screeds: Signals concrete deliverer to position truck to facilitate pouring of concrete. Moves discharge chute of truck to direct concrete into forms. Spreads concrete into inaccessible sections of forms, using rake or shovel. Levels concrete to specified depth and workable consistency, using hand held screed and floats to bring water to surface and produce soft topping. Smooths and shapes surfaces to freshly poured concrete, using straightedge and float or power screed. Finishes concrete surfaces, using power trowel, or wets and rubs concrete with abrasive stone to impart finish. Removes rough or defective spots from concrete surfaces, using power grinder of chisel and hammer, and patches holes with fresh concrete or epoxy compound. Molds expansion joints and edges, using edging tools, jointers and straightedge. May sprinkle colored stone chips, powdered steel, or coloring powder on concrete to produce prescribed finish. May produce rough concrete surface, using broom. May mix cement, using hoe or concrete-mixing machine. May direct mixing of concrete, and setting of forms. May specialize in finishing steps and stairways. May break up and repair old concrete surfaces, using pneumatic tools.

33.14.3. Stonemason:

Duties: Sets stone to build stone structures, such as piers, walls and abutments, or lays walks, curbstones, or special types of masonry, such as alberene (acid-resistant soapstone for vats, tanks and floors), using mason’s tools: Shapes stone preparatory to setting, using chisel, hammer, and other shaping tools. Spreads mortar over stone and foundation with trowel and sets stone in place by hand or with aid of a crane. Aligns stone with plumb line and finishes joints between stone with pointing trowel.

May spread mortar along mortar guides to ensure joints of uniform thickness. May clean surface of finished wall to remove mortar, using muriatic acid and brush.

If any of the Performance for this trade affects either the weight bearing or structural integrity of the building being worked on, then Contractor must be registered as a current Major Contractor (General

Contractor) with the DCP prior to undertaking any part of the Performance.

Painters:

33.25.1. Painter, Working Supervisor:

License or Registrations Requirements: As required by DCP.

Duties: Coordinates, plans, estimates and oversees the work of other painters. Painting, decorating, hardwood finishing, paper hanging, drywall painting for any and all types of building and residential work. Applies coats of paint, varnish, stain, enamel, or lacquer to decorate and protect interior and exterior surfaces, trimming and fixtures of buildings, and other structures: smooths surfaces using sand paper brushes, or steel wool and removes old paint from surfaces using paint remover, scraper, wire brush, or blowtorch to prepare surfaces for painting. Fills nail holes, cracks, and joints with putty, plaster, or other filler. Selects premixed paints, or mixes required portions of pigment oil and thinning and drying substances to prepare paint that matches specified colors. Paints surfaces using brushes, spray gun or rollers. Simulates wood grain, marble, brick or tile effects. Applies paint with cloth, brush, sponge, or finers to create special effects. Erects scaffolding or sets up ladders to perform tasks above ground level.

Plumbers:

License Requirements: as required by DCP.

33.26.1. Plumber Supervisor

Duties: Installation, repair, replacement, alteration or maintenance of all plumbing, heating, cooling and piping. Installs, repairs, replaces, alters or maintains gas, water, and associated fixtures, laboratory equipment, sanitary equipment, other than subsurface sewage disposal systems, all water systems for human usage, sewage treatment facilities and all associated fittings within a building and lateral storm and sanitary lines from building to the mains, swimming pools and pumping equipment, makes connections to back flow prevention devices, and works with low voltage wiring, not exceeding twenty-four volts, used within a lawn sprinkler system. Installation, repair, replacement, alteration or maintenance of those portions of a solar hot water heating system, which include the basic domestic hot water tank and the tiein to the potable water system.

33.26.2. Plumber, Journeyperson

Duties: Same work as the P-1 licensee, but only in the employ of a Contractor licensed for such work.

Assembles, installs, and repairs pipes, fittings, and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes: studies building plans and working drawings to determine work aids required and sequence installations. Inspects structure to ascertain obstructions to be avoided to prevent weakening of structure resulting from installation of pipe. Locates and marks position of pipe connections and passage holes for pipe in walls and floors, using ruler, spirit level, and plumb bob. Cuts openings in walls and floors to accommodate pipe and pipe fittings, using hand tools and power tools. Cuts and threads pipe, using pipe cutters, cutting torch, and pipe threading machine.

Bends pipe to required angle by use of pipe-bending machine or by placing pipe over block and bending it by hand. Assembles and installs valves, pipe fittings, and pipes composed of metals, such as iron, steel, brass, and lead and nonmetals, such as glass, vitrified clay, and plastic, using hand tools and power tools.

Joins pipes by use of screws, bolts, fittings, solder, plastic solvent and caulk joints. Fills pipe system with water or air and reads pressure gauges to determine whether the system is leaking. Installs and repairs plumbing fixtures, such as sinks, commodes, bathtubs, water heaters, hot water tanks, garbage disposal units, dishwashers, and water softeners. Repairs and maintains plumbing by replacing washers in leaky faucets, mending burst pipes and opening clogged drains. May weld holding fixtures to steel structural members

Roofing Services:

Duties: Covers roofs with composition shingles or sheets, wood shingles, slate or asphalt and gravel to waterproof roofs, including preparation of surface. (Demolition or removal of any type of roofing and or clean-up of any and all areas where a roof is to be re-laid.)

Covers roofs with roofing materials other than sheet metal, such as composition shingles or sheets, wood shingles, or asphalt and gravel, to waterproof roofs: Cuts roofing paper to size, using knife, and nails or staples it to roof in overlapping strips to form base for roofing materials. Aligns roofing material with edge of roof, and overlaps successive layers, gauging distance of overlap with chalk line, gauge on shingling hatchet, or by lines on shingles. Fastens composition shingles or sheets to roof with asphalt, cement, or nails. Punches holes in slate, terra cotta, or wooden shingles, using punch and hammer. Cuts strips of flashing and fits them into angles formed by walls, vents, and intersecting roof surfaces. When applying asphalt or tar and gravel to roof, mops or pours hot asphalt or tar onto roof base. Applies alternate layers of hot asphalt or tar and roofing paper until roof covering is as specified. Applies gravel or pebbles over top layer, using rake or stiff-bristled broom. May attach shingles to exterior walls and apply roofing paper and tar to shower pans, decks, and promenades to waterproof surfaces. May remove existing roofing materials to prepare for new roof. Includes repairs to all types of commercial roofing systems including, but not limited to the following: Asphalt build-up, coal-tar buildup, and single ply EPDM. Capable of effecting repairs to flashing/coping systems including, but not limited to the following: KMM, fabric, metal and EPDM.

Security/Data Services-Electrical:

Duties: Install, erect, maintenance, alteration or repair of low voltage security wiring and/or data wiring and associated hardware. This includes, but is not limited to, CAT5/CAT6 wiring, camera installation and integration, IT equipment installation and integration, card reader systems and applicable wiring/integration.

Contractor shall be licensed and capable of procuring and installing S2 Card reader systems, APEX cameras, and installation/integration of Milestone video services.

Siding:

Duties: Install siding per specifications and schematics for commercial and residential buildings.

Conducted site surveys prior to installation, taking necessary measurements. Prep exterior for siding installation including any needed repairs, prepares underlying surface prior to installation, makes any needed repairs to underlying surface, uses tools of all types including cutting machinery and measurement instruments

Sprinkler Fitters:

Installation, alteration, maintenance and repair of fire protection sprinkler systems.

License as required by DCP.

Welding Fabrication:

Installation, alteration, maintenance and repair of metal fabrication services. This includes, but is not limited to, fencing, railings, and structural metal components.

License as required by DCP.