Specifications - 40ft Enclosed Trailer.docx

65DPS-S3787 - Specifications for Mobile Training Unit NOTE: Vendors who wish to take exception to items will need to submit a separate list citing those exceptions.

40’ triple spread axle, Enclosed Gooseneck Trailer with 5th wheel hitch attachment

COMPLIES YES_____ NO_____

General Requirements:

· All items must be installed/connected, tested and in working order, unless otherwise stated.

Specifications:

1. Trailer Dimensions and Structure:

· 40’ x 8.5’ gooseneck style enclosed trailer, minimum GVWR of 20,000 lbs., with a 5th wheel attach point and 7 pin trailer/truck electric connector

· Semi screwless exterior

· Sub floor 12” on center

· Stainless steel front corners and top cap

· Electric powered landing gear

· Electric trailer brakes, including emergency braking (breakaway)

· Non-slip, fluid resistant flooring, included on the trailer ramp, rubberized with diamond pattern

· 3 – 8k axles with 8k spare tire

· 4’ man door with side door bar lock, passenger side

· Back trailer ramp with side door bar locks; minimum of 4000 lbs. weight bearing

· Wheel chock trailer jacks; wheel chocks

2. Interior Features:

· 2 vertical cabinets at the front passenger corner; inside dimensions: 48” height, 24” width, 18” depth, drivers side cabinet with single door that opens to the side wall, man door side cabinet opens to the interior with a door stay shut mechanism.

· Tip-out bins installed, smaller bins at the top, largest at the bottom, must fit inside the cabinets, comparable to or better:

· Simplastics, part # TOB3456-WT

· Simplastics, part # SIM29

· Partitioned cargo netting and vertical L Tracks at rear of gooseneck compartment, comparable to or better:

· Vertical VersaTie - Surface mounted track with contour edge,

· Mac’s Custom Tiedowns, part # 2300012 VersaTie – L-Track Triple Stud Fitting with Pearl Ring Mac’s Custom Tiedowns, Part # 32507 Heavy Duty Cargo Net with L Track Fittings for the gooseneck storage area 9 snap hooks-marine equally spaced in 3 rows and 3 columns between cabinets. Must be stainless steel quality or better, comparable to or better - Capable of securing motorcycle helmets:

· 3 vertical rows between the front cabinets spaced 18” apart with QTY 12 - DVA Mechanics L-Track adjustable gear hook

· 5 rows - 34’ per row, VersaTie Recess-mounted Track with flanged edge, structurally supported:

1 on the floor 2” away from the left side-wall the length of the trailer floor 1 on the floor 2” away from the right side-wall the length of the trailer floor 1 directly up the middle of the floor 1 surface mount 8” above the deck on left sidewall 1 surface mount 8” above the deck on right sidewall 60 movable L-Track single stud fitting with round rings Filler track for unused L-track space 42 TorkStrap HD750 tie-down straps

3. Electrical System:

· Shore power weatherproof outlet with removeable 20’ connector – 50-amp circuit/panel.

· Generator mounted forward and outside of internal storage area with internal controls located closest to the front on the driver’s side – 7000W Onan brand, with its own 15-gallon fuel tank, additional 2” sound insulation, built on a slide out for servicing.

Add a useable workbench surface on top of generator housing

· AC outlets, mounted on the walls at 36” from the floor, 16 duplex outlets with metal wall plates equally distributed half on each side of the trailer walls is a separate circuit.

· Renogy 7.68 KWh RV power solution – Solar Panels, 300 AH Batteries, Charge controller, and 3000W inverter kit – model number RNG-RV-7KWH-US

· QTY 2, Greenland 13,500 BTU Inverter RV Air Conditioner with Heat Pump or comparable

· Internal LED lights

· 3 internal rows, ceiling mounted parallel to trailer travel; left, middle, and right

· 3 wall switches at both the man door and the trailer door

· External LED lights

· Facing down covering the rear ramp

· Facing down covering the man door

· 1 wall switch combined, located at both the man door and the trailer door

4. Additional Features:

· Outside accessible and lockable Fuel Station with a 40-gallon gasoline tank

· 24’ external retractable awning mounted on the passenger/right hand side

· Foam insulation for floor, ceiling, and walls

· QTY 1 - 4’x8’ white board mounted on the driver’s side wall

· Department decal graphics with QR code 5’ x 8’ installed on each side exterior wall and ramp - will get updated PDF Design or logo from State of Nevada.