Special Packaging Instruction - AK16410007.pdf
PDF 270 KB Posted
- Attached to
- Metering Fuel Pump (4 NSNs) for HMMWV
- Solicitation number
- SPRDL1-24-R-0171
About this file
This DD Form 2169 is a Special Packaging Instruction (SPI) for a Fuel Injection Pump (NSN 2910-01-641-0007) manufactured by Stanadyne Corporation. The document provides detailed specifications for preservation, cleaning, drying, packing, and marking of the pump, with two packaging levels (Level A and Level B) specified. Key packaging requirements include using MIL-STD-2073-1 standards, applying specific preservatives (MIL-PRF-21260, SAE 10W), wrapping with MIL-PRF-121 Type I, and using either wood-cleated panelboard shipping boxes or weather-resistant fiberboard boxes depending on the packing level.
The accompanying packaging instructions include precise details for cushioning placement, with specific notes on fabricating cushioning "A", "B", and "C" using Grade 275 material and waterproof adhesive. The document provides dimensional sketches showing exact placement and attachment methods for securing the fuel injection pump within its packaging, with careful attention to flute direction and bolt/washer placement. The packaging is designed to protect the fuel injection pump during transportation and storage, with a revision date of 25 OCT 2024 and a specific packaging instruction number of AK16410007.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188 xEW
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
. DB2829-6286 (84760) FUEL INJECTION PUMP 19207 AK16410007
4. NATIONAL STOCK NO. 6. REVISION
2910-01-641-0007
5. DATE
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
001 NONE 15.0 0.447 12.3 X 9.1 X 6.9
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1, METHOD 42
13. CLEANING 1-B INTERNAL PRESERVATIVE: MIL-PRF-21260, GR SAE 10W
MIL-STD-2073-1 2-C CLOSURE: NAS 847
14. DRYING 3-D EXTERNAL PRESERVATIVE: MIL-PRF-21260, GR SAE 10W
MIL-STD-2073-1 4-E 1 WRAP: MIL-PRF-121, TYPE I, SIZE: 20 X 29
15. PACKING
5-F CUSHIONING: ASTM D4727, TY CF, CL DOM
6-G 1 CONTAINER: ASTM D5118, TY CF, CL DOM, VARIETY SW,
a. LEVEL A GR. 275, ST RSC, SIZE: 11-1/8 X 6-1/8 X 8-1/8
MIL-STD-2073-1 & NOTE I 7 1 BAG: MIL-DTL-117, TY I, CL E, ST 1, SIZE: 16 X 21
b. LEVEL B 8-G 1 CONTAINER: ASTM D5118, TY CF, CL WR, GR W5c, MIL-STD-2073-1 & NOTE I ST RSC, SIZE: 8-7/8 X 6-5/8 X 11-3/4
16. MARKING
MIL-STD-129 & NOTE H
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. FLUSH OR SLUSH INTERNALLY AND THOROUGHLY DRAIN EXCESS.
C. PLUG OR CAP ALL PUMP PORTS USING APPROPRIATE SIZES.
D. APPLY PRESERVATIVE TO UNPAINTED AND UNPLATED METALLIC SURFACES.
E. SECURE WRAP USING TAPE.
F. FOR FABRICATION AND PLACEMENT OF CUSHIONING SEE PAGE 2.
G. CLOSE CONTAINER IN ACCORDANCE WITH ASTM D1974, METHOD 2B3.
H. THE UNIT CONTAINER SHALL ALSO BE MARKED ON THE TOP AND ONE SIDE, IN ACCORDANCE WITH MIL-STD-129-SPECIAL MARKINGS, “REUSABLE CONTAINER AND CUSHIONING, DO NOT DESTROY.
OPEN ALONG TAPE SEAMS, AS NEEDED, USING SHALLOW-BLADED KNIFE.”
I. PACKING:
LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING
BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO
ASTM-D 6880, CLASS 2.
LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,
CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,
CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.
WHEN TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS,
EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.
25 OCT 2024 A
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved xEWOMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply wi th a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
DB2829-6286 (84760) FUEL INJECTION PUMP 19207 AK16410007
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2910-01-641-0007 25 OCT 2024
17. NOTES/DRAWING
A
File details come from the government source that posted it. Updated .