9.1B-Amendment 0002-A7-SOOs.pdf

STATEMENT OF OBJECTIVES

Date: 4 JUN 24

TSW ID: CDSAFRLEGL

DODAAC: FP8187

PPN: 9.1b

SCOPE: Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Liquid Nitrogen (LN2). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government-owned tanks at AFRL (Air Force Research Lab) Eglin AFB, FL.

PRODUCT: LN2 (NSN 6830-01-644-2557) shall meet the requirements of Type II, Grade B, Commercial Item Description A-A 59503C dated 3 Mar 2011, Nitrogen, Technical.

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

PRODUCT DELIVERY: Product shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler.

Deliveries shall be made from 0800-1500 hours, Monday-Friday, excluding federal holidays.

Product deliveries shall be made to the following address:

AFRL (Air Force Research Lab) 2306 Perimeter Rd Eglin AFB, 32542

EXPEDITED / EMERGENCY DELIVERY:

Emergency deliveries shall be within three (3) calendar days of request unless otherwise determined with the DLA Contracting Officer. After emergency delivery order is placed, Contractor shall coordinate delivery time and acceptance of emergency deliveries with customer.

GOVERNMENT-OWNED LN2 TANK: LN2 shall be delivered into the following Government-owned storage vessel listed below. The storage vessels will be trailer accessible.

Location Tank Capacity-Gallons MAWP 2306 Perimeter Rd 1 – 6000 GL 250 psig

METHOD OF MEASUREMENT: Method of measurement shall be by truck mounted calibrated flow meter.

INSPECTION AND ACCEPTANCE: Inspection for quality shall be performed at origin.

Quantity determination and acceptance shall be at destination. Contractor shall obtain customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

TANK OVER-PRESSURE PROTECTION: If it is determined during supplier site visits or upon review of Customer tank technical information, that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. The inspection by the Contractor and any required corrective actions shall be completed within 30 days after contract award. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior approval from DLA Energy Contracting Officer, Service Control Point (AFPET), Air Force Life Cycle Management Center (AFLCMC/WNZ), and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a “Hot Fill” in order to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard, converting the liquid product carried to a gas to purge/cool and remove minor constitutes outlined in 27210 prior to pushing liquid into the tank.

SECURITY REQUIREMENTS: Delivery personnel shall be U.S. citizens. In addition, delivery personnel must possess a state or federally issued photo ID that displays the driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to back ground checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel be escorted while making deliveries. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while on each facility.

TSW – CDSANNISTO

3 October 2024

Scope: The Defense Logistics Agency (DLA) Aerospace Energy Business Unit, as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Liquid Nitrogen (LN2) and Liquid Oxygen (LOX) to Anniston Army Depot, AL into Government-owned and Contractor-provided tanks. The Contractor shall provide all product, materials, supplies, management, tools, equipment, transportation and labor necessary for the delivery of requested product f.o.b. destination to Anniston Army Depot, AL.

Product: LN2 (NSN 6830-01-666-3681), Grade L, shall meet the requirements of the most current version of CGA G-10.1, Mar 13,2023.

LOX (NSN 6830-01-666-4438), Grade B, shall meet the requirements of the most current version of CGA G-4.3, May 13, 2024.

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

Product Delivery: Routine deliveries shall be made within 7 calendar days after receipt of an order from the appointed Delivery Scheduler. Emergency deliveries shall be made within 3 calendar days after receipt of an order from the appointed Delivery Scheduler. Deliveries shall be made Monday-Thursday from 7:00 am to 2:30 pm.

Product deliveries shall be made to the following address:

Anniston Army Depot 7 Frankford Ave.

Anniston, AL 36201

Description of Government-Owned LN2 Tank:

LN2 shall be delivered into the following Government-owned storage vessel listed below. The storage vessel will be trailer accessible.

Location # of tanks (Gallons) MAWP* Bldg.108 1 3,000 GL 110 psig

*MAWP (Maximum Allowable Working Pressure)

Description of Contractor-Provided LN2 Tanks:

LN2 shall be delivered into the following Contractor-provided storage vessels listed below. The storage vessels will be trailer accessible.

Location # of tanks (Gallons) Bldg 5 1 3,000 Bldg 145 1 9,000

Description of Government-Owned LOX Tanks:

LOX shall be delivered into the following Government-owned storage vessels listed below. The storage vessels will be trailer accessible.

Location # of tanks (Gallons) MAWP* Bldg.413 1 1,000 GL 130 psig Bldg 5 1 1,000 GL 80 psig

*MAWP (Maximum Allowable Working Pressure)

Description of Contractor-Provided LOX Tanks:

LOX shall be delivered into the following Contractor-provided storage vessels listed below. The storage vessels will be trailer accessible.

Location # of tanks (Gallons) Bldg 400C 1 9,000 Bldg 451 1 1,500

Fill Line Restriction Orifice: If it is determined during supplier site visits or upon review of Customer tank technical information, that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior coordination with DLA Energy Contracting Officer and the activity that physically possesses the tank(s).

Tank Hot Fill: Occasionally, the Contractor may be required to perform a “Hot Fill” in order to cool-down and refill any tank that has gone empty and is warm.

Contractor-Provided Tank Installation: Contractor shall install their Contractor provided tanks and equipment on existing cement pads, within the existing system footprints, no later than 30 calendar days from start of contract performance. The Contractor shall also perform all inspections and maintenance of Contractor provided tanks/equipment to assure systems provide safe and uninterrupted support. Contractor provided tanks may be chilled through initial deliveries, but initial deliveries into Contractor provided tanks shall not qualify as a “Hot Fill” service. The Contractor will coordinate with the current supplier to effect removal of current equipment and installation of new equipment, or to retain the current equipment. The Contractor may be required to provide a temporary system during change out of existing system or tanks to eliminate any delay in supply of product.

Contractor-Provided Equipment Removal: Contractor provided tanks/equipment shall be removed by the Contractor within 30 calendar days after contract termination.

The Contractor will coordinate with the follow-on supplier to effect removal of current equipment and installation of new equipment.

Inspection and Acceptance: Inspection for quality shall be performed at origin.

Quantity determination and acceptance shall be at destination. Contractor shall obtain customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

Security Requirements: Delivery personnel shall be U.S. citizens. In addition, driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to background checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel be escorted while making

TSW – CDSA656SSL

DODAAC – FP8018

PPN: 9.1b 1 Nov 2024 products and related services, requires delivery of Liquid Nitrogen (LN9) and Liquid Oxygen (LOA) to Arnold AFB, TN into Government-owned and Contractor-Leased tanks. The Contractor shall provide all product, materials, supplies, management, tools, equipment, transportation and labor necessary for the delivery of requested product f.o.b. destination to Arnold AFB, TN.

Product: LN9 (NSN 9135-01-665-3253), NITROGEN, LIQUID, GRADE B, 99.99%, BULK, shall meet the requirements of the most current version of MIL-PRF-27401G, 07-

AUG-2013.

LOA (NSN 9135-01-665-3259), OXYGEN, LIQUID, GRADE A, 99.6%, BULK, shall meet the requirements of the most current version of MIL-PRF-25508J, 02-MAR-2020.

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

Product Delivery:

Liquid Nitrogen: Due to mission critical requirements, deliveries are time sensitive and must be delivered within the requested timeframe. Routine deliveries shall be accomplished within 24 hours after telephone notification of an order. Expedited product deliveries shall be accomplished within 12 hours after telephone notification of an order.

Fewer than 5 expedited deliveries are expected per year. Deliveries shall be made Monday-Thursday from 7:00 am to 2:00 pm.

Liquid Oxygen: Deliver to destination within 48 hours after telephone notification of an order, unless a longer period of time is stated on the order. Expedited product deliveries shall be accomplished within 24 hours after telephone notification of an order. The deliveries must be within the requested timeframe to preclude lost test time. Deliveries shall be made Monday-Thursday from 7:00 am to 2:00 pm.

Product deliveries shall be made to the following address:

Arnold AFB, TN 869 Third Street Arnold AFB, TN 37389

Description of Government-Owned LN2 Tank:

Liquid Nitrogen shall be delivered into the following Government-owned storage vessel listed below. The storage vessel will be trailer accessible.

Location # of tanks (Gallons) MAWP*

J4 Nitrogen Plant 2 28,000 GL 110 psig Mark I/ELA 1 10,000 GL 49 psig APTU 1 3,500 GL 150 psig J6 4 25,000 GL 110 psig J2 2 25,000 GL 110 psig PWT 2 25,000 GL 110 psig

*MAWP (Maximum Allowable Working Pressure)

Description of Contractor-Leased Tanks:

Liquid Nitrogen shall be delivered into the following Customer Contractor-Leased storage vessels listed below. The storage vessels will be trailer accessible.

Location # of tanks (Gallons) MAWP STAT 2 3,200 70 psig

Description of Government-Owned LOX Tanks:

Liquid Oxygen shall be delivered into the following Government-owned storage vessels listed below. The storage vessels will be trailer accessible.

Location # of tanks (Gallons) MAWP* APTU 1 7,500 GL 150 psig

*MAWP (Maximum Allowable Working Pressure)

Fill Line Restriction Orifice: If it is determined during supplier site visits or upon review of Customer tank technical information, that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior coordination with DLA Energy Contracting Officer and the activity that physically possesses the tank(s).

Tank Hot Fill: Occasionally, the Contractor may be required to perform a “Hot Fill” in order to cool-down and refill any tank that has gone empty and is warm.

Inspection and Acceptance: Inspection for quality shall be performed at origin.

Quantity determination and acceptance shall be at destination. Contractor shall obtain customer signature for delivery at each location for acceptance of quantity. A copy of driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to background checks. Some locations will require delivery personnel be escorted while making accessing delivery location and while on each facility. Note: Driver reports to Delivery Gate Two for security check in. Once complete driver is escorted to the delivery point. Gate 2 closes at 1400 and driver will be escorted to delivery location(s).

Date: 31 May 24

TSW ID: CDSBARKSDA

DODAAC: FP8124

PPN: 9.1b

SCOPE: Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government-owned tanks at Barksdale AFB, LA.

PRODUCT: ABO (NSN 6830-01-644-2463) shall meet the requirements of Type II of specification MIL-PRF-27210J, dated 7 Aug 2013.

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

PRODUCT DELIVERY: Product shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler. Expedited or emergency delivery requests shall be delivered within 3 calendar days of receipt of an order.

Deliveries shall be made from 0700-1600 hours, Tuesday-Friday, excluding federal holidays.

Product deliveries shall be made to the following address:

2 LRS/LGRF

1049 Davis Ave.

Bldg 5943, Cryo Facility Barksdale AFB, LA 71110

GOVERNMENT-OWNED ABO TANKS: ABO shall be delivered into the following Government-owned storage vessel listed below. The storage vessels will be trailer accessible.

Location Tank Capacity-Gallons MAWP Bldg 5943 (Cryo Facility) 1 – 6,000 GL 60 psig Bldg 5943 (Cryo Facility) 1 – 3,000 GL 50 psig

INSPECTION AND ACCEPTANCE: Inspection for quality shall be performed at origin.

Quantity determination and acceptance shall be at destination. Contractor shall obtain customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

TANK OVER-PRESSURE PROTECTION: If it is determined during supplier site visits or upon review of Customer tank technical information, that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. The inspection by the Contractor and any required corrective actions shall be completed within 30 days after contract award. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior approval from DLA Energy Contracting Officer, Service Control Point (AFPET), Air Force Life Cycle Management Center (AFLCMC/WNZ), and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a Hot Fill to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard, converting the liquid product carried to a gas to purge/cool and remove minor constitutes outlined in 27210 prior to pushing liquid into the tank.

SECURITY REQUIREMENTS: Delivery personnel shall be U.S. citizens. In addition, delivery personnel must possess a state or federally issued photo ID that displays the driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to back ground checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel be escorted while making deliveries. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while on each facility. Security Forces will contact the POL shop upon the driver’s arrival and the driver will be escorted to the delivery location.

Date: 30 MAY 2024

TSW ID: CDSCHARLES

DODAAC: FP8010

PPN: 9.1b

SCOPE: Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government-owned tanks at Charleston AFB, SC.

PRODUCT: ABO (NSN 6830-01-644-2463) shall meet the requirements of Type II of specification MIL-PRF-27210J, dated 7 Aug 2013.

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

PRODUCT DELIVERY: Product shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler.

Deliveries shall be made from 0700-1500 hours, Monday-Friday, excluding federal and local holidays.

Product deliveries shall be made to the following address:

628 LRS/LGRF

Bldg 674 200 Long St.

Joint Base Charleston, SC 29404

GOVERNMENT-OWNED ABO TANKS: ABO shall be delivered into the following Government-owned storage vessel listed below. The storage vessels will be trailer accessible.

Location Tank Capacity-Gallons MAWP 200 Long St Bldg 675 2 – 6,000 GL 55 psig

DELIVERY DRIVER PLEASE CONTACT FSC 30 MINS PRIOR TO ARRIVAL AT 843-

963-5079

EXPEDITED / EMERGENCY DELIVERY:

Emergency deliveries shall be within three (3) calendar days of request unless otherwise determined with the DLA Contracting Officer. After emergency delivery order is placed, Contractor shall coordinate delivery time and acceptance of emergency deliveries with customer.

METHOD OF MEASUREMENT: Method of measurement shall be by truck mounted calibrated flow meter.

INSPECTION AND ACCEPTANCE: Inspection for quality shall be performed at origin.

Quantity determination and acceptance shall be at destination. Contractor shall obtain customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

TANK OVER-PRESSURE PROTECTION: If it is determined during supplier site visits or upon review of Customer tank technical information, that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. The inspection by the Contractor and any required corrective actions shall be completed within 30 days after contract award. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior approval from DLA Energy Contracting Officer, Service Control Point (AFPET), Air Force Life Cycle Management Center (AFLCMC/WNZ), and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a “Hot Fill” in order to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard, converting the liquid product carried to driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to back ground checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel be escorted while making

Date: 4 May 2020

TSW ID: CDSCHARLOT

DODAAC: FP8135

PPN: 9.1b

SCOPE: Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government-owned tanks at Charlotte ANG, NC.

PRODUCT: ABO (NSN 6830-01-644-2463) shall meet the requirements of Type II of specification MIL-PRF-27210J

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

PRODUCT DELIVERY: Product shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler.

Deliveries shall be made from 0800-1500 hours, Monday-Friday, excluding federal and local holidays.

Product deliveries shall be made to the following address:

145 AW

Bldg 54 4930 Minuteman Way Charlotte, NC 28208

GOVERNMENT-OWNED ABO TANKS: ABO shall be delivered into the following Government-owned storage vessel listed below. The storage vessels will be trailer accessible.

Location Tank Capacity-Gallons MAWP Bldg 54 1 – 5,000 GL 50 psig Bldg 54 1 – 1,400 GL 50 psig

EXPEDITED / EMERGENCY DELIVERY: Emergency deliveries shall be within three

(3) calendar days of request unless otherwise determined with the DLA Contracting

Officer. After emergency delivery order is placed, Contractor shall coordinate delivery time and acceptance of emergency deliveries with customer.

INSPECTION AND ACCEPTANCE: Inspection for quality shall be performed at origin.

Quantity determination and acceptance shall be at destination. Contractor shall obtain customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

TANK OVER-PRESSURE PROTECTION: If it is determined during supplier site visits or upon review of Customer tank technical information, that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. The inspection by the Contractor and any required corrective actions shall be completed within 30 days after contract award. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior approval from DLA Energy Contracting Officer, Service Control Point (AFPET), Air Force Life Cycle Management Center (AFLCMC/WNZ), and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a “Hot Fill” in order to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard, converting the liquid product carried to a gas to purge/cool and remove minor constitutes outlined in 27210 prior to pushing liquid into the tank.

SECURITY REQUIREMENTS: Delivery personnel shall be U.S. citizens. In addition, delivery personnel must possess a state or federally issued photo ID that displays the driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to back ground checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel be escorted while making deliveries. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while on each facility. The driver will be escorted to the delivery location.

Date: 13 Jun 24

TSW ID: CDSCOLUMBU

DODAAC: FP8001

PPN: 9.1b

SCOPE: Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government-owned tanks at Columbus AFB, MS.

PRODUCT: ABO (NSN 6830-01-644-2463) shall meet the requirements of Type II of specification MIL-PRF-27210J, dated 7 Aug 2013.

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

PRODUCT DELIVERY: Product shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler. Expedited or emergency delivery requests shall be delivered within 3 calendar days of receipt of an order.

Deliveries shall be made from 0800-1400 hours, Monday-Friday, excluding federal holidays.

Product deliveries shall be made to the following address:

14 MSG/LGRFO

504 Simler Blvd.

Columbus AFB, MS 39710

GOVERNMENT-OWNED ABO TANKS: ABO shall be delivered into the following Government-owned storage vessel listed below. The storage vessels will be trailer accessible.

Location Tank Capacity-Gallons MAWP BLDG 222 2 – 6,000 GL 50 psig customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

TANK OVER-PRESSURE PROTECTION: If it is determined during supplier site visits or upon review of Customer tank technical information, that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. The inspection by the Contractor and any required corrective actions shall be completed within 30 days after contract award. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior approval from DLA Energy Contracting Officer, Service Control Point (AFPET), Air Force Life Cycle Management Center (AFLCMC/WNZ), and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a Hot Fill to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard, converting the liquid product carried to a gas to purge/cool and remove minor constitutes outlined in 27210 prior to pushing liquid into the tank.

SECURITY REQUIREMENTS: Delivery personnel shall be U.S. citizens. In addition, delivery personnel must possess a state or federally issued photo ID that displays the driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to back ground checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel be escorted while making

Date: 1 OCT 2024

TSW ID: CDSDOBBINS

DODAAC: FP8145

PPN: 9.1b

SCOPE: Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government-owned tanks at Dobbins ARB, GA.

PRODUCT: ABO (NSN 6830-01-644-2463) shall meet the requirements of Type II of specification MIL-PRF-27210

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

PRODUCT DELIVERY: Product shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler.

Deliveries shall be made from 0700-1400 hours, Monday-Friday, excluding federal holidays.

Product deliveries shall be made to the following address:

Base Fuels

865 ATLANTIC AVE, BLDG 531

Dobbins ARB, GA 30069

GOVERNMENT-OWNED ABO TANKS: ABO shall be delivered into the following Government-owned storage vessel listed below. The storage vessels will be trailer accessible.

Location Tank Capacity-Gallons MAWP BLDG 990 (CRYO AREA) 1 – 3,000 GL 60 psig 1 – 2,000 GL 60 psig

EXPEDITED / EMERGENCY DELIVERY: Emergency deliveries shall be within three

(3) calendar days of request unless otherwise determined with the DLA Contracting

INSPECTION AND ACCEPTANCE: Inspection for quality shall be performed at origin.

Quantity determination and acceptance shall be at destination. Contractor shall obtain customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

TANK OVER-PRESSURE PROTECTION: If it is determined during supplier site visits or upon review of Customer tank technical information, that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. The inspection by the Contractor and any required corrective actions shall be completed within 30 days after contract award. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior approval from DLA Energy Contracting Officer, Service Control Point (AFPET), Air Force Life Cycle Management Center (AFLCMC/WNZ), and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a “Hot Fill” in order to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard, converting the liquid product carried to driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to back ground checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel be escorted while making deliveries. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while on each facility. Security Forces will contact the POL shop upon the driver’s arrival and the driver will be escorted to the delivery location. Enter the base off Atlanta Road through Dobbins Gate #2 for truck security check. Call Base Fuels at 678-655-4861 to be escorted to LOX Bldg. 990.

Date: 4 OCT 24

TSW ID: CDSEGLINAF

DODAAC: FP8045

PPN: 9.1b

SCOPE: Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO) and Liquid Nitrogen (LN2). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government-owned tanks at Eglin AFB, FL.

PRODUCT: ABO (NSN 6830-01-644-2463) shall meet the requirements of Type II of specification MIL-PRF-27210

LN2 (NSN 6830-01-644-2557) shall meet the requirements of Type II, Grade B, Commercial Item Description A-A 59503C dated 3 Mar 2011, Nitrogen, Technical.

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

PRODUCT DELIVERY: Product shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler.

Deliveries shall be made from 0800-1500 hours, Monday-Friday, excluding federal holidays.

Product deliveries shall be made to the following address:

96 LRS Fuels Management Flight Bldg 89 107 E. Daytona Rd.

Eglin AFB, FL 32542

GOVERNMENT-OWNED ABO TANKS: ABO AND LN2 shall be delivered into the following Government-owned storage vessel listed below. The storage vessels will be trailer accessible.

Location Tank Capacity-Gallons MAWP Bldg 89 2 – 6,000 GL ABO 55 psig ea Bldg 89 1 – 5,000 GL LN2 55 psig

EXPEDITED / EMERGENCY DELIVERY: Emergency deliveries shall be within three

(3) calendar days of request unless otherwise determined with the DLA Contracting

INSPECTION AND ACCEPTANCE: Inspection for quality shall be performed at origin.

Quantity determination and acceptance shall be at destination. Contractor shall obtain customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

TANK OVER-PRESSURE PROTECTION: If it is determined during supplier site visits or upon review of Customer tank technical information, that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. The inspection by the Contractor and any required corrective actions shall be completed within 30 days after contract award. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior approval from DLA Energy Contracting Officer, Service Control Point (AFPET), Air Force Life Cycle Management Center (AFLCMC/WNZ), and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a “Hot Fill” in order to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard, converting the liquid product carried to a gas to purge/cool and remove minor constitutes outlined in 27210 prior to pushing liquid into the tank.

SECURITY REQUIREMENTS: Delivery personnel shall be U.S. citizens. In addition, delivery personnel must possess a state or federally issued photo ID that displays the driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to back ground checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel to pass background check to gain access to base and be escorted while making deliveries. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while on each facility.

Date: 8 Jul 19

TSW ID: CDSGULFPOR

DODAAC: FP8104

PPN: 9.1b

SCOPE: Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government-owned tanks at Gulfport ANG, MS.

PRODUCT: ABO (NSN 6830-01-644-2463) shall meet the requirements of Type II of specification MIL-PRF-27210J, dated 7 Aug 2013.

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

PRODUCT DELIVERY: Product shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler. Expedited or emergency delivery requests shall be delivered within 3 calendar days of receipt of an order.

Deliveries shall be made from 0730-1530 hours, Monday-Friday, excluding federal holidays.

Product deliveries shall be made to the following address:

Gulfport ANGB 4715 Hewes Ave.

Bldg 163 Gulfport, MS 39507

GOVERNMENT-OWNED ABO TANKS: ABO shall be delivered into the following Government-owned storage vessel listed below. The storage vessels will be trailer accessible.

Location Tank Capacity-Gallons MAWP BLDG 141 2 – 3,000 GL 50 psig customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

TANK OVER-PRESSURE PROTECTION: If it is determined during supplier site visits or upon review of Customer tank technical information, that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. The inspection by the Contractor and any required corrective actions shall be completed within 30 days after contract award. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior approval from DLA Energy Contracting Officer, Service Control Point (AFPET), Air Force Life Cycle Management Center (AFLCMC/WNZ), and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a Hot Fill to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard, converting the liquid product carried to a gas to purge/cool and remove minor constitutes outlined in 27210 prior to pushing liquid into the tank.

SECURITY REQUIREMENTS: Delivery personnel shall be U.S. citizens. In addition, delivery personnel must possess a state or federally issued photo ID that displays the driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to back ground checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel be escorted while making

Date: 4 JUN 24

TSW ID: CDSHOMESTE

DODAAC: FP8159

PPN: 9.1b

SCOPE: Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO) and Liquid Nitrogen (LN2). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government-owned tanks at Homestead ARS, FL.

PRODUCT: ABO (NSN 6830-01-644-2463) shall meet the requirements of Type II of specification MIL-PRF-27210

LN2 (NSN 6830-01-644-2557) shall meet the requirements of Type II, Grade B, Commercial Item Description A-A 59503C dated 3 Mar 2011, Nitrogen, Technical.

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

PRODUCT DELIVERY: Product shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler.

Deliveries shall be made from 0700-1200 hours, Monday-Friday, excluding federal holidays.

Product deliveries shall be made to the following address:

482 MSG/LGRF

29389 Service Rd., Bldg 206 Homestead ARS, FL 33039-1299

GOVERNMENT-OWNED ABO TANKS: ABO AND LN2 shall be delivered into the following Government-owned storage vessel listed below. The storage vessels will be trailer accessible.

Location Tank Capacity-Gallons MAWP Bldg 161 1 – 3,000 GL ABO 50 psig Bldg 163 1 – 3,000 GL LN2 50 psig

INSPECTION AND ACCEPTANCE: Inspection for quality shall be performed at origin.

Quantity determination and acceptance shall be at destination. Contractor shall obtain customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

TANK OVER-PRESSURE PROTECTION: If it is determined during supplier site visits or upon review of Customer tank technical information, that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. The inspection by the Contractor and any required corrective actions shall be completed within 30 days after contract award. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior approval from DLA Energy Contracting Officer, Service Control Point (AFPET), Air Force Life Cycle Management Center (AFLCMC/WNZ), and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a “Hot Fill” in order to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard, converting the liquid product carried to driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to back ground checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel to pass background check to gain access to base and be escorted while making deliveries. All delivery vehicles

Date: 31 MAY 24

TSW ID: CDSHURLBUR

DODAAC: FP8002

PPN: 9.1b

SCOPE: Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government-owned tanks at Hurlburt Field, FL.

PRODUCT: ABO (NSN 6830-01-644-2463) shall meet the requirements of Type II of specification MIL-PRF-27210

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

PRODUCT DELIVERY: Product shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler. Emergency deliveries shall be made within 3 calendar days after receipt of an order from the appointed Delivery Scheduler.

Deliveries shall be made from 0700-1600 hours, Monday-Friday, excluding federal holidays.

Product deliveries shall be made to the following address:

Cryogenics Area 953 Tully Street, Bldg 90635 Hurlburt Field, FL 32544

GOVERNMENT AND CONTRACTOR-OWNED ABO TANKS: ABO shall be delivered into the following Government (1 ea) and Contractor (1ea) owned storage vessel listed below. The storage vessels will be trailer accessible.

Location Tank Capacity-Gallons MAWP Bldg 90635 2 – 3,000 GL ABO 75 psig customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

TANK OVER-PRESSURE PROTECTION: If it is determined during supplier site visits or upon review of Customer tank technical information, that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. The inspection by the Contractor and any required corrective actions shall be completed within 30 days after contract award. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior approval from DLA Energy Contracting Officer, Service Control Point (AFPET), Air Force Life Cycle Management Center (AFLCMC/WNZ), and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a “Hot Fill” in order to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard, converting the liquid product carried to driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to back ground checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel to pass background check to gain access to base and be escorted while making deliveries. All delivery vehicles

TSW ID: CDSJACKSON

DODAAC: FP8105

PPN: 9.1b

SCOPE: Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO).