Anniston_CO2_SOO.pdf

PDF 105 KB Posted

Attached to
Liquid Carbon Dioxide (CO2) Federal contract opportunity
Solicitation number
SPE601-19-R-0327
Issued by
Defense Logistics Agency

About this file

Anniston SOO

View the file

Other files for this federal contract opportunity

Other files attached to Liquid Carbon Dioxide (CO2), newest first.
File Type Posted
SPE601-19-R-0327-0001_CO2.pdf PDF
SPE601-19-R-0327_CO2_4_Jun_19.pdf PDF
APG_CO2_SOO.pdf PDF
Aerospace_Text_CO2.pdf PDF
CGA_G-6.2-2011_Carbon_Dioxide.pdf PDF
TRANS_CERT.pdf PDF
China_Lake_CO2_SOO.pdf PDF
Robins_CO2_SOO.pdf PDF
QAPs.pdf PDF
Contractor_Performance_Data_Sheet.pdf PDF
DLA_2019.pdf PDF
Show all 11

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

CO2 for Anniston Army Depot

STATEMENT OF OBJECTIVES

26 Dec 18

1. DESCRIPTION OF REQUIREMENT: Defense Logistics Agency (DLA) Energy, as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Liquid Carbon Dioxide (CO2). The Contractor shall provide all materials, supplies, product, management, tools, equipment, labor, and transportation necessary to deliver product f.o.b.

destination into Government-owned tanks at Anniston Army Depot, AL.

2. PRODUCT SPECIFICATIONS:

2.1. Liquid Carbon Dioxide, CO2 (NSN 6830-01-650-4710) shall meet the requirements of Grade H, IAW Compressed Gas Association (CGA), Specification CGA-G-6.2-2011.

Each shipping container constitutes a lot and shall be sampled and tested prior to departing the designated trans fill. The sample shall be a representative of the liquid carbon dioxide in the shipping container. A copy of the Certificate of Analysis shall accompany each shipment.

2.1.1. In addition to the reports required elsewhere within this contract, one copy of a Certificate of Analysis for each sample required by the specification shall be submitted as an attachment to the applicable Wide Area Workflow (WAWF) Combo document or documented on the WAWF Statement of Quality tab.

2.2. Unit of issue for CO2 shall be LB (pound) for all documentation.

3. PRODUCT ORDERING:

3.1. The DLA Energy Contracting Officer shall issue Blanket Delivery Orders (DD Form 1155) for obligation of funds for shipments to be scheduled during that specific timeframe by the Delivery Scheduler. The individual shipments requested by the Delivery Scheduler will designate the specific quantity to be delivered at the customer location specified in the contract.

3.2. The Contractor shall provide DLA Energy a list of personnel available on a 24-hour a day basis to take orders from the Delivery Scheduler, as well as delivery information/status on the order. The list shall include full name, office phone number, cell number, fax number and email. DLA Energy shall be notified of changes in contact personnel, phone numbers and email addresses.

4. PRODUCT DELIVERY:

Anniston Army Depot, AL

CO2 for Anniston Army Depot

4.1. Deliver to Anniston Army Depot, 7 Frankford Avenue, Anniston, AL 36201. Off-load shall be into a 5,000 LBS, 300 psig Government-owned storage tank at Building 132.

4.2. Delivery hours shall be Monday thru Friday from 0730 to 1500 hours, excluding weekends and federal holidays.

4.3. The Contractor shall deliver to destination within five (5) calendar days after notification by the Delivery Scheduler. For emergency deliveries, product shall be delivered within two (2) calendar days after receipt of an order from the Delivery Scheduler. Weekends and federal holidays are excluded from calendar days.

5. TANK OVER-PRESSURE PROTECTION: If it is determined during supplier site visits or upon review of tank technical information that additional tank over-pressure protection is required for Government-owned tanks to comply with CGA P-59, Prevention of Over-Pressure During Filling of Cryogenic Vessels, the Contractor shall provide and install the additional tank protection which may encompass any of the methods identified in the P-59. NOTE: Over-pressure protection devices shall not be installed on Government-owned storage tanks without prior coordination with DLA Energy-FEM and the activity that physically possesses the tank(s).

6. INSPECTION AND ACCEPTANCE: Inspection shall be at origin. Quantity determination and acceptance shall be at destination.

7. METHOD OF MEASUREMENT: Quantity determination to be performed by use of a truck mounted calibrated flow meter.

8. HOT FILLS: Occasionally, the Contractor may be required to perform a “Hot Fill” in order to cool-down and refill any Government-owned tank that has gone empty and is warm.

9. SECURITY REQUIREMENTS: The Contractor shall comply with Anniston Army Depot rules and regulations on security, safety and environmental as applicable.

Contractor will require an escort for entry on the installation.

File details come from the government source that posted it.