Anniston_Army_Depot_LOX_SOO_5_Feb_19.pdf

ANNISTON ARMY DEPOT

STATEMENT OF OBJECTIVES, 5 FEB 19

PPN: 9.2d

6830-01-666-4438

Delivery Notes:

LOX (NSN 6830-01-666-4438) shall meet the requirements of CGA G-4.3. Testing for particulate content is not required.

The Contractor shall provide all product, materials, supplies, management, tools, equipment, transportation and labor necessary for the delivery of LOX f.o.b. destination into a Contractor-provided tank at Anniston Army Depot, AL.

PRODUCT ORDERING: The DLA Energy Contracting Officer shall issue individual Delivery Orders (DD Form 1155) for obligation of funds for shipments to be scheduled during that specific timeframe by the appointed Delivery Scheduler. The individual shipments requested by the appointed Delivery Scheduler will designate the specific quantity to be delivered at the customer location specified in the contract.

PRODUCT DELIVERY: Product shall be delivered within 48 hours after receipt of an order from the appointed Delivery Scheduler.

Deliveries shall be made from 0800-1500 hours, Monday-Friday excluding federal holidays.

Product deliveries shall be made to the following address:

Anniston Army Depot 7 Frankford Ave.

Bldg 440 Anniston, AL 36203

DESCRIPTION OF CONTRACTOR PROVIDED TANK REQUIREMENT: Required LOX storage tank location and capacity is as follows:

Tank Capacity Location # of Tanks (Gallons/Tons) Bldg. 440 1 9,000 GL/43 TN

The bulk LOX tank will be located at the southeast corner of Bldg 433 and the piping will supply Bldg 440 which is adjacent to Bldg 433.

INSPECTION AND ACCEPTANCE: Inspection for quality shall be performed at origin.

Quantity determination and acceptance shall be at destination.

METHOD OF MEASUREMENT: Method of measurement shall be by truck mounted calibrated flow meter.

SECURITY REQUIREMENTS: For access to Anniston Army Depot, the delivery truck driver shall have a valid driver’s license and be a U.S. citizen.

SERVICES FOR PPN 9.2d NSN 6830-01-666-4438, Liquid Oxygen

SE0000174 & SE0000175 – INSTALLATION, MAINTENANCE, AND REMOVAL OF

CONTRACTOR PROVIDED TANKS AND EQUIPMENT

Contractor shall install their Contractor provided tanks and equipment on existing cement pads, within the existing system footprints, no later than 30 calendar days from start of contract performance. The Contractor shall also perform all inspections and maintenance of Contractor provided tanks/equipment to assure system provides safe and uninterrupted support. Contractor provided tanks/equipment shall be removed by the Contractor within 30 calendar days after contract termination. Contractor provided tanks may be chilled through initial deliveries, but initial deliveries into Contractor provided tanks shall not qualify as a “Hot Fill” service. The Contractor will coordinate with the current supplier to effect removal of current equipment and installation of new equipment, or to retain the current equipment. The Contractor may be required to provide a temporary system during change out of existing system or tanks to eliminate any delay in supply of product.

SE0000178 – DETENTION COST

TRANSPORT TRUCK AND TRAILER FREE TIME AND DETENTION RATE

DELIVERED F.O.B. DESTINATION

The Contractor shall provide all product, materials, supplies, management, tools, equipment, transportation and labor necessary for the delivery of LOX f.o.b. destination into a Contractor-provided tank at Anniston Army Depot, AL.