Attachment_for_Amendment_0002.pdf

The following contract provisions under solicitation SPE600-16-R-0716 are hereby updated and reads as follows:

C-0003/C16.52 LUBRICATING OIL, AIRCRAFT TURBINE ENGINE (PETROLEUM, GRADE 1010) (LA6) (A

QUALIFIED PRODUCT) (DLA ENERGY JUN 2016)

(a) Specification MIL-PRF-6081E dated 12 December 2014, applies.

(b) The Lubricating Oil used shall be of the type and grade in the Qualified Products Database (QPD). Qualified Products Listing (QPL) QPL-6081-30 Notice 1, dated February 27, 2008, is a Notice of Transformation that cancels this QPL and replaces the information with the new Qualification Data Set (QDS). To locate this information, you must link to the QPD at:

http://qpldocs.dla.mil/search/parts.aspx?qpl=2190.

C-0004/C16.55 LUBRICATING OIL, AIRCRAFT PISTON ENGINE (NONDISPERSANT MINERAL OIL)

(LA7) (A QUALIFIED PRODUCT) (DLA ENERGY NOV 2014)

Lubricating oil shall conform to the Society of Automotive Engineers (SAE) Standard J 1966 (latest revision, August 2011).

(a) CLASSIFICATION. The lubricating oils shall be furnished in the following grades:

SAE Viscosity Grade Military NATO Code Number National Stock Number

60 1120 None 9150-01-430-2884

(b) QUALIFICATION.

(1) The lubricating oil shall be only those products —

(i) Authorized by the qualification activity for listing on the latest qualified products database http://qpldocs.dla.mil/search/parts.aspx?qpl=2720: or

(ii) Supplied by the offeror –

(A) In which the offeror has been in the QPL list within the last four years prior to the date of this solicitation and:

(B) In which the base stock oil has never changed from when the lubricating oil was supplied under a DLA Energy Bulk lubricants purchase program contract within the last four years prior to the date of this solicitation.

(2) Detailed information of the procedures to be followed when submitting a candidate lubricating oil is available from:

NAVAL AIR SYSTEMS COMMAND

FUELS AND LUBRICANTS

DIVISION, AIR-4.4.5 BLDG 2360

22229 ELMER ROAD UNIT 4

PATUXENT RIVER MD

20670-1534

(3) Requalification shall be required in the event any change is made in the source or composition of the lubricant, the ingredients used, the manufacturing process, or the plant location.

C-0005/C16.61-1 LUBRICATING OIL, INTERNAL COMBUSTION ENGINE [MS9250 (LO6) (SAE40) and (SAE

15W40)] (QUALIFIED PRODUCTS) (DLA ENERGY JAN 2015)

(a) Qualified product shall conform to MIL-PRF-009000L(SH) dated 23 December, 2014.

(b) The lubricating oil shall be only those products authorized by the qualification activity, Naval Sea Systems Command (NAVSEA), for listing on the latest qualified products database (QPL-9000) from http://qpldocs.

dla.mil/search/parts.aspx?qpl=1552 prior to contract award. Detailed information on qualification procedures is available from:

NAVAL SEA SYSTEMS COMMANDER, SEA 05S1

1333 ISAAC HULL AVENUE, SE

STOP 5160

WASHINGTON NAVY YARD, DC 20376-5160

(c) Any changes in the formulation of the product submitted for qualification testing shall be approved by NAVSEA. Minor changes, such as an increase in pour point additive, may require only notification; however, the extent of supporting test data required is at the discretion of NAVSEA.

C-0006/C16.62 LUBRICATING OIL, ENGINE (SAE GRADE 40) (DLA ENERGY NOV 2014)

(a) Product must conform to the following specification:

PROPERTY

1. Viscosity @ 40oC

LIMIT

137 cSt min

TEST METHOD

ASTM D 445

Viscosity @ 100oC 14.1 cSt min ASTM D 445

2. Viscosity Index 98 min ASTM D 2270

3. Flash Point 216oC min ASTM D 92

4. Fire Point 246oC min ASTM D 92

5. Pour Point -6oC max ASTM D 97

6. Zinc Content 10 ppm max ASTM D 4628, ASTM D 4927 or ASTM D 6443

7. Total Base Number 9 mg KOH/g min ASTM D 2896

(b) CLASSIFICATION. The lubricating oil shall be furnished in the following grade:

SAE Viscosity Grade Unit of Issue National Stock Number

40 Gallons 9150-01-555-3598 40 Bag 9150-01-556-3257

C-0007/C16.63 LUBRICATING OIL, STEAM TURBINE AND GEAR (MS-2190 TEP) (LTL) (A QUALIFIED

PRODUCT) (DLA ENERGY NOV 2014)

(a) Steam turbine lubricating oil shall conform to the requirements of specification MIL-PRF-17331K(SH) dated May 7, 2013, as modified below:

(1) The lubricating oil shall be as cited in the Qualified Products Database (QPD). To access the information listed in QPD- 17331, link to the Assistdocs website at http://www.assistdocs.com/.

(b) SPECIFICATION DEVIATIONS/MODIFICATIONS.

(1) Anti-foam and Demulsifier Additive Tolerance Range: In order to meet specification properties, a tolerance range may be used for both the anti-foam and demulsifier additives versus the exact concentration used at qualification. In order to elect to use a tolerance range, the Contractor must officially submit this request prior to contract award to NAVSEA qualification activity for approval.

(2) Foam Testing (ASTM D892): The use of Option A in ASTM D892 is only allowed if the oil has been blended for at least a week and results are not being used to meet testing requirements at origin. This could include those oils that are being tested at destination or for MIL-STD-3004 requirements.

(c) QUALIFICATION.

(1) Paragraph 4.2 of specification MIL-PRF-17331K(SH) dated May 7, 2013 applies.

(2) Contact with Naval Sea Systems Command (NAVSEA) is required prior to any qualification or requalification testing.

Detailed information on qualification procedures is available from:

COMMANDER NAVAL SEA SYSTEMS COMMAND

ATTN: SEA 05S

1333 ISAAC HULL AVENUE, SE

STOP 5160

WASHINGTON NAVY YARD, DC 20376-5160

ENERGY QAP E12 (JUL 2015) POINT OF ACCEPTANCE

(a) For f.o.b. origin contract items, acceptance of the supplies furnished hereunder shall take place at origin.

(b) For f.o.b. destination contract items, acceptance of the supplies furnished hereunder shall take place at destination.

(c) Acceptance shall take place as stated above, unless specifically stated otherwise in the contract.