Attachment 5 - PID Data.pdf

*** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:015518733

DESICCANT, ACTIVATED

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

UNIT CAN CONTAINS 10 BAGS.

REPACKAGING OF MATERIAL:

REFERENCE NUMBER:A1094

REFERENCE NUMBER:A1036

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:ZD072

REFERENCE NUMBER:R1922

REFERENCE NUMBER:ZD080

AGM CONTAINER CONTROLS INC 08992 P/N 660100‐10

AGM CONTAINER CONTROLS INC 08992 P/N VISI‐SIEVE 660100‐10

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1E

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0

UNIT CONT:10 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:ZZ ‐ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

MANUFACTURER'S UNIT BOTTLE W/SECONDARY

SEAL.PACK 12 OR 24 BOTTLES IN PARTITIONED

FIBERBOARD BOX. MARK AND LABEL EACH

BOTTLE & BOX IAW MIL‐STD 129.

GHS MARKING REQUIRED ON PACKAGING.

NSN:009857099

LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ034

REFERENCE NUMBER:A0003

REFERENCE NUMBER:A1036

REFERENCE NUMBER:ZD073

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:RS060

QPL APPLIES: MIL‐PRF‐23699 CLASS C/I ONLY. NATO SYMBOL O‐156/0‐152

UNIT OF ISSUE = QUART (QT), ONE QT EQUATES TO A CN THAT CONTAINS 1.0

QUART.

CAN SHALL BE OF THE FOLLOWING DIMENSIONS: 4‐1/16" DIA X 5‐9/16" HT OR

401 X 509

THE FOLLOWING EXCEPTION IS TAKEN ON PPP‐C‐96E DATED 12/31/1992 PARAGRAPH

3.3.1.3: DELETE "WITH COMPOUND‐LINED". DOUBLE‐SEAMED ENDS SHALL NOT BE

COMPOUND‐LINED

GOVERNMENT LOT ACCEPTANCE TESTING IS REQUIRED. QUALITY ASSURANCE: FROM

EACH PRODUCTION LOT OR BATCH OF THIS CONTRACT, THE CONTRACTOR SHALL

SELECT A SAMPLE AFTER PACKAGING AS FOLLOWS: FROM EQUALLY SPACED

PACKAGING INTERVALS ONE QUART SHALL BE SELECTED UNTIL 30 ONE QUART CANS

HAVE BEEN COLLECTED. THE SAMPLE SHALL BE FORWARDED WITH THE CONTRACTOR'S

LOT ANALYSIS TO EACH ADDRESSEE LISTED BELOW. THE LOT ANALYSIS SHALL

ANNOTATE THE LOT NUMBER, NSN, CONTRACT NUMBER, DELIVERY ORDER NUMBER AND

THE DATE OF PACK. THE SAMPLE AND LOT ANALYSIS SHALL BE SHIPPED TO THE

FOLLOWING AT THE CONTRACTOR'S EXPENSE TO (6 cans to the Air Force and 24 cans to the Navy):

AEROSPACE FUELS LAB

HQ, AFPET/AFTLA,,,,

BUILDING 70, AREA B

WRIGHT PATTERSON AFB, OH 45433‐3623

AND

NAVAL AIR STATION

RECEIVING OFFICER

HAZMART BLDG 2385

SAMPLE (AIR‐4.4.5)

PATUXENT RIVER, MD 20670

CRITICAL APPLICATION ITEM

IAW BASIC SPEC NR MIL‐PRF‐23699G NOT 2

REVISION NR G DTD 12/06/2023

PART PIECE NUMBER: GRADE C/I

LINE ITEM 00002 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

SPECIAL MARKING CODE:33 ‐33 Type II, shelf life

SUPPLEMENTAL INSTRUCTIONS:

PACKAGING SHALL BE IAW MIL‐STD‐290.

MARKING/BAR CODING IAW MIL‐STD‐290

AND MIL‐STD‐129.

REFERENCE NUMBER:IP025 OBJECT TEXT ID ST

NSN:014356468

DEICING‐DEFROSTING AND ANTIICING FLUID

REFERENCE NUMBER:RQ011

UNIT CAN CONTAINS 5 GALLONS.

SHELF LIFE: TYPE II, 24 MONTHS. MARK & LABEL I/A/W MIL‐STD‐129R

CONCENTRATED FORM

PROPYLENE GLYCOL BASED. NO ETHYLENE GLYCOL

ALLOWED.

MINIMUM PROPYLENE GLYCOL CONTENT IS 88% BY

WEIGHT.

CONTRACTOR SHALL PROVIDE W/ OFFER, DOCUMENTATION

REQUIRED BY SPEC SECTION 4 TO INCLUDE

ACCEPTANCE, PERIODIC AND PREPRODUCTION TESTS TO

THE CONTRACTING OFFICER.

OFFERORS SHALL SUBMIT WITH THEIR QUOTE THE FAA

QUALIFICATION LETTER STATING THAT THEIR FLUID

CONFORMS TO THE SAE/AMS 1424L, TYPE I AND IS

LISTED IN FAA ORDER 8400.10

NOTICE

REFERENCE NUMBER:ZD072

REFERENCE NUMBER:R1873

REFERENCE NUMBER:RS058

IAW BASIC NON GOVT STD AMS 1424

REVISION NR DTD

PART PIECE NUMBER: AMS1424TY 1/5 GALLON

IAW REFERENCE NON GOVT STD SAE AMS1424P

REVISION NR P DTD 09/01/2018

PART PIECE NUMBER: TYPE I/5 GALLON

LINE ITEM 00003 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C

UNIT CONT:ZZ OPI:M

PACK CODE:U

NEW & UNUSED CAN CONFORMING TO

REQUIREMENTS OF 1H1 CAN.

INTERIOR SHALL BE COMPATIBLE W/CONTENTS.

MARK/LABEL IAW MIL‐STD 129. PAPER

LABELS NOT AUTHORIZED.

REFERENCE NUMBER:IP025 OBJECT TEXT ID ST LANGUAGE E

NSN:001806290

HYDRAULIC FLUID, FIRE RESISTANT

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ011

QPL Applies: MIL‐PRF‐83282

UNIT OF ISSUE = DRUM (DR), ONE DR CONTAINS 55 GALLONS.

THE FOLLOWING EXCEPTION IS TAKEN TO MIL‐PRF‐83282D DATED SEPT 30, 1997

AND AMD 1 DATED DEC 10, 1997: 1. TABLE V CITES FEDERAL TEST METHOD (FTM)

350. PARA. 5.2 AND 6.1.1 OF FTM 350 DELETE "1,1,1‐TRICHLOROETHANE" AND

SUBSTITUTE "HEPTANE, HEXANE, PETROLEUM NAPHTHA, OR ACETONE".

COMPATABILITY TEST WILL NOT BE REQUIRED AS A QUALITY CONFORMANCE TEST.

GOVERNMENT LOT ACCEPTANCE TESTING IS REQUIRED QUALITY ASSURANCE: From each produc on lot or batch of this contract, the contractor shall select a sample and forward the sample with the contractor's lot analysis to the address as indicated below. The sample and lot analysis shall be forwarded within 7 days a er packaging of the lot has been completed. The sample, lot analysis annotated with NSN, delivery order/purchase order number, lot number and contract number shall be sent to the following addressee at the contractor's expense: ,,,, Aerospace Fuels Lab

HQ, AFPET/AFTLA

2430 C Street, Bldg 70, Area B

Wright‐Pa erson AFB, OH 45433‐7632.

The sample shall be taken as follows: THE FILLING OPERATION SHALL BE

DIVIDED INTO THREE EVENLY SPACED INTERVALS. ONE‐GALLON OF PRODUCT, FROM

A DRUM RANDOMLY SELECTED FROM EACH OF THE THREE FILLING INTERVALS, SHALL

BE WITHDRAWN AND PLACED INTO A CLEAN ONE GALLON CONTAINER AND SEALED.

THE TYPE OF SAMPLE CONTAINER IS NOT RESTRICTED (I.E., MAY BE GLASS OR

PLASTIC BOTTLES, METAL CANS, ETC.), BUT CONTAINERS MUST BE COMPATIBLE

WITH THE HYDRAULIC FLUID, BE UNUSED (NEW) AND CLEANED PRIOR TO TAKING

SAMPLES, BE SEALABLE, AND BE ACCEPTABLE TO THE CARRIER WHO WILL

TRANSPORT THE SAMPLES TO THE LABORATORY. For batches supplied in more than one container size, representa ve samples shall be taken as specified in the NSN associated with each different container filling.

IAW BASIC SPEC NR MIL‐PRF‐83282D(1) NOT 1

REVISION NR D DTD 07/24/2019

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL‐STD‐290H(1) NOT 1

REVISION NR H DTD 05/05/2021

PART PIECE NUMBER: SHELF LIFE: TYPE II, 24 MONTHS

LINE ITEM 00004 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

PACKAGING AND MARKING SHALL

BE IAW MIL‐STD‐290.

NSN:001497432

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ011

QPL APPLIES: MIL‐PRF‐83282

UNIT OF ISSUE = GALLON (GL), ONE GL EQUATES TO A CAN THAT CONTAINS 1.0

GALLON.

AND AMD 1 DATED DEC 10, 1997:

1. TABLE V CITES FEDERAL TEST METHOD (FTM) 350. PARA. 5.2 AND 6.1.1 OF

FTM 350 DELETE "1,1,1‐TRICHLOROETHANE" AND SUBSTITUTE "HEPTANE, HEXANE,

PETROLEUM NAPHTHA, OR ACETONE".

2. THE FOLLOWING EXCEPTION IS TAKEN ON PPP‐C‐96E DATED 12/31/1992

PARAGRAPH 3.3.1.3: DELETE "WITH COMPOUND‐LINED". DOUBLE‐SEAMED ENDS

SHALL NOT BE COMPOUND‐LINED

THE EXTERIOR COLOR OF THE CAN SHALL BE RED APPROXIMATING COLOR NO. 11105

OR 21105 OF FED STD 595.

GOVERNMENT LOT ACCEPTANCE TESTING IS REQUIRED. FROM EACH PRODUCTION LOT

OR BATCH OF THIS CONTRACT, THE CONTRACTOR SHALL SELECT A SAMPLE AND

FORWARD THE SAMPLE WITH THE CONTRACTOR'S LOT ANALYSIS TO THE ADDRESS AS

INDICATED BELOW. THE SAMPLE AND LOT ANALYSIS SHALL BE FORWARDED WITHIN 7

DAYS AFTER PACKAGING OF THE LOT HAS BEEN COMPLETED. THE SAMPLE, LOT

ANALYSIS ANNOTATETED WITH NSN, DELIVERY ORDER NUMBER/PURCHASE ORDER

NUMBER, LOT NUMBER AND CONTRACT NUMBER SHALL BE SENT TO THE FOLLOWING

ADDRESSEE AT THE CONTRACTOR'S EXPENSE: ,,,,

AEROSPACE FUELS LAB

HQ, AFPET/AFTLA

2430 C STREET, BLDG 70, AREA B

WRIGHT‐PATTERSON AFB, OH 45433‐7632.

THE SAMPLE SHALL BE TAKEN AS FOLLOWS: FILLED AND SEALED CONTAINERS SHALL

BE TAKEN FROM THE FILLING LINE AT EVENLY SPACED INTERVALS THROUGHOUT THE

ENTIRE FILLING PERIOD OF AN INDIVIDUAL BATCH UNTIL THREE ONE GALLON CANS

HAVE BEEN ACCUMULATED. FOR BATCHES SUPPLIED IN MORE THAN ONE CONTAINER

SIZE, REPRESENTATIVE SAMPLES SHALL BE TAKEN AS SPECIFIED IN THE NSN

ASSOCIATED WITH EACH DIFFERENT CONTAINER FILLING.

REVISION NR 1 DTD 07/24/2019

LINE ITEM 00005 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

QUP:006 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

PACKAGING AND MARKING SHALL BE IAW

MIL‐STD‐290.

REFERENCE NUMBER:IP056 OBJECT TEXT ID ST

NSN:007822679

LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:A1094

QPL APPLIES

GOVERNMENT LOT ACCEPTANCE TESTING REQUIRED.

MARK & LABEL I/A/W MIL‐STD‐290H

MARK IN ACCORDANCE WITH MIL‐STD‐129R

QUALITY ASSURANCE: From each produc on lot or batch of this contract, the contractor shall select a sample as follows: 3 one gallon samples shall be drawn from the fill line just prior to the container fill point and shall be packaged, marked and labeled for shipment. The sample shall be forwarded with the contractor's lot analysis to the addressee listed below.

The sample and lot analysis shall be shipped to at the contractor's expense to:

Aerospace Fuels Lab

HQ, AFPET/AFTLA,,,,

Building 70, Area B, Wright Pa erson AFB, OH 45433‐3623

IAW BASIC SPEC NR MIL‐PRF‐7808M

REVISION NR M DTD 06/10/2022

PART PIECE NUMBER: GRADE 3

LINE ITEM 00006 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

NSN:011977691

PID Text Error/Missing ‐ Please Review NSN

LINE ITEM 00007 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

NSN:006815999

LUBRICATING OIL, AIRCRAFT TURBINE ENGINE

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ011

QPL APPLIES: MIL‐PRF‐23699

UNIT OF ISSUE = DRUM (DR), ONE DR CONTAINS 55.0 GALLONS

SYNTHETIC NATO SYMBOL O‐156/O‐152. 18/18 DRUM. GAGE MARK & LABEL IAW

MIL‐STD‐290H

GOVERNMENT LOT ACCEPTANCE TESTING REQUIRED. QUALITY ASSURANCE: From each produc on lot or batch of this contract, the contractor shall select a sample as follows: 9 one gallon samples shall be drawn from the fill line just prior to the container fill point and shall be packaged, marked and labeled for shipment. A copy of the contractor's analysis on each lot shall be forwarded to the address below within seven days following submission of the sample for lot acceptance tes ng. The lot analysis shall annotate the lot number, NSN, contract number and the date of submission. The sample and lot analysis shall be shipped to the following at the contractor's expense to (3 to AF and 6 to Navy):

Aerospace Fuels Lab HQ, AFPET/AFTLA,,,, Building

70, Area B, Wright Pa erson AFB, OH 45433‐3623 and

Naval Air Sta on Receiving Officer HAZMART

Bldg. 2385 Sample (AIR‐4.4.5) Patuxent River, MD 20670

IAW BASIC SPEC NR MIL‐PRF‐23699G NOT 2

REVISION NR G DTD 12/06/2023

PART PIECE NUMBER: CLASS C/I

PART PIECE NUMBER: SHELF LIFE: TYPE II, 36 MONTHS

LINE ITEM 00008 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

NSN:013685489

CLEANING COMPOUND, WINDSHIELD

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RS002

REFERENCE NUMBER:A1132

UNIT OF ISSUE = DRUM (DR), ONE DR CONTAINS 55.0 GALLONS.

NON‐DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: A‐A‐59664

TRANSPORT INFORMATION AND CHEMICAL SYNONYMS: D.O.T. SHIPPING

INFORMATION: UN NUMBER ‐ 1993; PROPER SHIPPING NAME ‐ FLAMMABLE LIQUIDS,

N.O.S. (METHANOL); HAZARD CLASS AND LABEL ‐ 3; PACKAGING GROUP ‐ III.

SYNONYMS: N/A.

IAW BASIC CID A‐A‐59664C NOT 1

REVISION NR C DTD 04/19/2022

LINE ITEM 00009 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

NEW & UNUSED U.N. CERTIFIED 1A1,

18/18 GAUGE; DRUM INTERIOR SHALL BE

COMPATIBLE WITH CONTENTS. MARK/LABEL

IAW U.N. & MIL‐STD 129 REQUIREMENTS.

STENCIL MARKINGS IAW MIL‐STD 129.

NSN:015907075

LUBRICATING OIL, ENGINE

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:A1036

REFERENCE NUMBER:ZD072

UNIT OF ISSUE IS 1 QUART

WANNER ENGINEERING INC 59776 P/N A01‐114‐3402

HDT EXPEDITIONARY SYSTEMS INC 92878 P/N T00022‐5083

LINE ITEM 00010 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:012

PACK CODE:U

NSN:014390681

CORROSION PREVENTIVE COMPOUND

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD072

REFERENCE NUMBER:A1036

REFERENCE NUMBER:A1094

REFERENCE NUMBER:RS002

UNIT OF ISSUE = BOX (BX), ONE BX CONTAINS 12 EACH 18 OZ (12 OZ NET

WEIGHT) BIG BLAST AEROSOL CANS.

PACKAGING: THE PRODUCT SHALL BE FURNISHED IN THE SPECIFIED QUANTITIES

PACKAGED IN THE MANUFACTURER'S ORIGINAL CONTAINERS. THERE SHALL BE NO

INTERACTION CHEMICALLY OR PHYSICALLY WITH THE CONTENTS SO AS TO DAMAGE

THE CONTAINERS OR ALTER THE STRENGTH, QUALITY, OR PURITY OF THE

CONTENTS. THE FILLED CONTAINERS SHALL BE CLOSED IN A MANNER THAT WILL

INSURE THE CONTENTS WILL NOT SPILL OR LEAK FROM THE CONTAINERS DURING

SHIPMENT, HANDLING, STORAGE, AND REDISTRIBUTION.

ADDITIONAL REQUIREMENTS:,,

1. MIL‐STD‐129 LABEL WILL ALSO INCLUDE LOT OR BATCH NUMBER,,

2. INSTRUCTIONS FOR USE AND STORAGE INCLUDED

WD‐40 COMPANY 09137 P/N 490095

WD‐40 COMPANY 09137 P/N WD‐40 18OZ AEROSOL

IAW REFERENCE STD NR MIL‐STD‐129R(3)

REVISION NR R DTD 02/25/2023

IAW REFERENCE UNK FED‐STD‐313F

REVISION NR F DTD 10/12/2018

LINE ITEM 00011 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

UNIT OF ISSUE BX=12EA

NSN:010805962

HYDRAULIC FLUID, CATAPULT

REFERENCE NUMBER:RP001

SHELF LIFE APPLIES: TYPE II, 24 MONTHS. MARK AND LABEL IAW

MIL‐STD‐290H.

THE FOLLOWING EXCEPTIONS ARE TAKEN TO TABLE IV, PAGE 19 OF MILITARY

SPECIFICATION MIL‐H‐22072C(AS) DATED 5 MARCH 1984:

1. IN ADDITION TO THOSE LIQUIDS SPECIFIED IN SECTION 5 OF ASTM D95,

TOLUENE IS ALSO AN ACCEPTABLE SOLVENT‐CARRIER.

2. IN SECTION 10 OF ASTM D95, REFRACTIVE INDEX MEASUREMENT FOR

CORRECTION OF GLYCOL CARRYOVER IS ALLOWED FOR CORRECT CALCULATION OF

WATER VOLUME.

IAW BASIC SPEC NR MIL‐H‐22072C NOT 2

REVISION NR C DTD 11/05/2019

LINE ITEM 00012 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

PACK CODE:U

NEW & UNUSED METAL 18/18 GAUGE DRUM.

DRUM INTERIOR SHALL BE COMPATIBLE WITH

CONTENTS IAW MIL‐H‐22072. MARK/LABEL IAW

MIL‐STD 290; BAR CODE IAW MIL‐STD 129.

PAPER LABELS NOT AUTHORIZED.

NSN:001116255

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

QPL APPLIES, MIL‐PRF‐46170E, TYPE I.

UNIT OF ISSUE = CAN (CN), ONE CN CONTAINS 5.0 GALLONS.

Quality Assurance: From the first produc on lot or batch of this contract, the Contractor shall select and forward a two gallon sample, with the contractor's lot analysis, to: ,,,, Army Petroleum Center ,,,, ATTN: AMSTA‐LC‐CJPT ,,,, Bldg 85‐3 ,,,, New Cumberland, PA 17070‐5005.

The sample and lot analysis shall be forwarded within four days a er packaging of the lot has been completed. The sample and lot analysis shall be furnished without charge to the Government, and shall be packaged, packed, marked, and shipped at the contractor's expense. Any defec ve item discovered by the Government a er shipment may be cause for rejec on of the en re contract quan ty. This does not apply to material damaged in transit.

IAW BASIC SPEC NR MIL‐PRF‐46170E NOT 1

REVISION NR E DTD 03/09/2018

PART PIECE NUMBER: TYPE I

LINE ITEM 00013 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

NSN:014649137

ANTIFREEZE

REFERENCE NUMBER:A1132

UNIT OF ISSUE = CONTAINER (CO), ONE CO CONTAINS 5.0 GALLONS

NON‐DEFINITIVE GOVERNMENT SPECIFICATION / STANDARD REFERENCE ‐

A‐A‐52624A NOTICE 2. CLASSIFICATION ‐ TYPE I IS ETHYLENE GLYCOL‐BASED,

CONCENTRATION A IS DEFINED AS 100% GLYCOL, BY VOLUME. TYPE I ANTIFREEZE

SHALL BE GREEN IN COLOR.

RECYCLED CONCENTRATED ANTIFREEZE: A MINIMUM OF 50% OF THE ETHYLENE

GLYCOL USED IN PRODUCING THE ANTIFREEZE SHALL HAVE BEEN RECYCLED AT A

PERMITTED RCRA FACILITY BY MEANS OF FRACTIONAL DISTILLATION, ION

EXCHANGE OR REVERSE OSMOSIS. RESULTING ANTIFREEZE SHALL MEET ALL

REQUIREMENTS OF THIS CID. NO OTHER METHODOLOGIES FOR RECYCLING

ANTIFREEZE ARE ACCEPTABLE.

CONTRACTOR SHALL FURNISH WITH THE OFFER DOCUMENTATION REQUIRED BY CID

PARAGRAPH 5 INCLUDING INDEPENDENT TEST REPORTS COVERING PARA 3.2 THRU

3.6 REQUIREMENTS. RESUBMISSION OF THE ABOVE DATA IS REQUIRED WITH EACH

PROCESS/MANUFACTURING CHANGE.

IAW BASIC CID A‐A‐52624A NOT 2

REVISION NR A DTD 06/12/2015

PART PIECE NUMBER: TYPE I CONC A RECYCLED

LINE ITEM 00014 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0

UNIT CONT:10 OPI:M

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

NEW <(>&<)> UNUSED CERTIFIED 6HA1 COMPOSITE DRUM.

INTERIOR SHALL BE COMPATIBLE WITH CONTENTS.

MARK/LABEL IAW MIL‐STD 129.

GHS MARKINGS REQUIRED ON PACKAGING.

NSN:001497431

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

QPL APPLIES: MIL‐PRF‐83282

UNIT OF ISSUE = QUART(QT), ONE QT EQUATES TO A CAN THAT CONTAINS 1.0

QUART CAN SHALL BE OF THE FOLLOWING DIMENSIONS: 4‐1/16" DIA X 5‐9/16 HT

OR 401 X 509

AND AMD 1 DATED DEC 10, 1997:

1. TABLE V CITES FEDERAL TEST METHOD (FTM) 350. PARA. 5.2 AND 6.1.1 OF

FTM 350 DELETE "1,1,1‐TRICHLOROETHANE" AND SUBSTITUTE "HEPTANE, HEXANE,

PETROLEUM NAPHTHA OR ACETONE".

2. THE FOLLOWING EXCEPTION IS TAKEN ON PPP‐C‐96E DATED 12/31/1992

PARAGRAPH 3.3.1.3: DELETE "WITH COMPOUND‐LINED". DOUBLE‐SEAMED ENDS

SHALL NOT BE COMPOUND‐LINED

THE EXTERIOR COLOR OF THE CAN SHALL BE RED APPROXIMATING COLOR NO. 11105

OR 21105 OF FED STD 595.

SELECT A SAMPLE AND FORWARD THE SAMPLE WITH THE CONTRACTOR'S LOT

ANALYSIS TO THE ADDRESS AS INDICATED BELOW. THE SAMPLE AND LOT ANALYSIS

SHALL BE FORWARDED WITHIN 7 DAYS AFTER PACKAGING OF THE LOT HAS BEEN

COMPLETED. THE LOT ANALYSIS SHALL BE ANNOTATED WITH NSN, LOT NUMBER,

DELIVERY ORDER NUMBER, CONTRACT NUMBER AND DATE OF SUBMISSION. THE

SAMPLE AND LOT ANALYSIS SHALL BE SENT TO THE FOLLOWING ADDRESSEE AT THE

CONTRACTOR'S EXPENSE: ,,,,

AEROSPACE FUELS LAB

HQ, AFPET/AFTLA

2430 C STREET, BLDG 70, AREA B

WRIGHT‐PATTERSON AFB, OH 45433‐7632.

THE SAMPLE SHALL BE TAKEN AS FOLLOWS: FILLED AND SEALED CONTAINERS SHALL

BE TAKEN FROM THE FILLING LINE AT EVENLY SPACED INTERVALS THROUGHOUT THE

ENTIRE FILLING PERIOD OF AN INDIVIDUAL BATCH UNTIL 6 ONE QUART CANS HAS

BEEN ACCUMULATED. FOR BATCHES SUPPLIED IN MORE THAN ONE CONTAINER SIZE,

REPRESENTATIVE SAMPLES SHALL BE TAKEN AS SPECIFIED IN THE NSN ASSOCIATED

WITH EACH DIFFERENT CONTAINER FILLING.

REVISION NR 1 DTD 07/24/2019

LINE ITEM 00015 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:024

PACK CODE:U

NSN:007534937

LUBRICATING OIL, AIRCRAFT PISTON ENGINE

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:R1418

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD072

INCLUDE A0646 OBJECT TEXT ID ST

REFERENCE NUMBER:A1036

UNIT OF ISSUE = DRUM (DR), DR CONTAINS 55 GALLONS.

SHELF LIFE: TYPE II, 36 MONTHS

GRADE: SAE 60

COMMERCIAL GRADE: 120

NATO CODE NUMBER: O‐128

IAW BASIC NON GOVT STD J1899

REVISION NR DTD 10/07/2006

PART PIECE NUMBER: II, SAE 60

LINE ITEM 00016 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

NEW & UNUSED 18/18 GAUGE DRUM. DRUM

INTERIOR SHALL BE COMPATIBLE WITH

CONTENTS. MARK/LABEL DRUM IAW MIL‐STD 290

& BAR CODE IAW MIL‐STD 129.

NSN:014872859

WIPE CLOTHS

FABREX UNLIMITED INC.

UNIT BOX CONTAINS EIGHT PACKAGES WHICH HAVE 100

WIPES EACH.

REFERENCE NUMBER:R2312

REFERENCE NUMBER:A1097

FABREX UNLIMITED INC 1BL94 P/N AC9165

LINE ITEM 00017 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0

UNIT CONT:10 OPI:M

PACK CODE:U

MANUFACTURER'S NEW & UNUSED UNIT BOX.

MARK AND LABEL EACH IAW MIL‐STD 129

REQUIREMENTS.

ORIGINAL MANUFACTURER'S UNIT PACKAGING

IS REQUIRED. REPACKAGING IS NOT

AUTHORIZED.

NSN:014727163

GREASE, AIRCRAFT

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:A1036

UNIT PLASTIC CONTAINER CONTAINS 1 LB NET WT.

NYE LUBRICANTS, INC. 98354 P/N UNIFLOR 8991‐MT

LINE ITEM 00018 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:LC CUSH/DUNN THKNESS:C

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:EC INTRMDTE CONT QTY:AAA

PACK CODE:U

SPECIAL MARKING CODE:07 ‐07 Glass ‐ do not drop

NEW & UNUSED CONTAINER.

MARK/LABEL IAW MIL‐STD 290; BAR CODE IAW

MIL‐STD 129. CONTRACT # & BAR CODE NOT

REQUIRED ON UNIT CONTAINER.

NSN:014974553

CLEANING COMPOUND, SOLVENT

REFERENCE NUMBER:RP001

UNIT OF ISSUE = BOTTLE (BT), ONE BT CONTAINS 32 FL OZ.

K N ENGINEERING, INC. DBA AEM 0N0N0 P/N 990621

LINE ITEM 00019 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

ORIGINAL MANUFACTURER'S COMMERCIAL UNIT

PACKAGING IS REQUIRED. REPACKAGING IS NOT

AUTHORIZED.

REFERENCE NUMBER:IP025 OBJECT TEXT ID ST

GHS MARKINGS REQUIRED ON PACKAGING.

NSN:015529119

HYDRAULIC FLUID, AUTOMATIC TRANSMISSION

REFERENCE NUMBER:RP001

ALL PRODUCTS OFFERED SHALL BE IAW AND QUALIFIED TO ALLISON SPECIFICATION

TES‐295. AT THE TIME OF SOLICITATION THE OFFERER SHALL PROVIDE THE

CONTRACTING OFFICER THE TES 295 APPROVAL NUMBER AND A COPY OF THE

ALLISON APPROVED LOGO.

UNIT OF ISSUE = QUART (QT), ONE QT CONTAINS 1.0 QUARTS.

ALLISON TRANSMISSION INC 73342 P/N TES‐295‐QT

LINE ITEM 00020 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA‐QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED‐STD‐313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED‐STD‐313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

NSN:009139717

LUBRICATING OIL, AIRCRAFT TURBOSHAFT ENGINE, SYNTHETIC

REFERENCE NUMBER:RP001

UNIT OF ISSUE = QUART, (QT), ONE QT EQUATES TO A CAN THAT CONTAINS 1.0

ALL ALTERNATE PRODUCTS OFFERED MUST MEET THE REQUIREMENTS OF PRATT AND

WHITNEY (P<(>&<)>W) SPECIFICATION PW‐521. THEY MUST ALSO APPEAR IN THE

LATEST EDITION OF (P<(>&<)>W) SERVICE BULLETIN NO. 238 AND MUST BE

APPROVED FOR USE IN ALL ENGINE MODELS.

GOVERNMENT LOT ACCEPTANCE TESTING IS REQUIRED.

QUALITY ASSURANCE: From each produc on lot or batch of this contract, the contractor shall select a sample a er packaging as follows: From equally spaced packaging intervals one quart can shall be selected un l

6 one quart cans are collected. The sample shall be forwarded with the contractor's lot analysis to the addressee listed below. The sample and lot analysis shall be shipped to at the contractor's expense to:

Aerospace Fuels Lab HQ

AFPET/AFTLA,,,,

Building 70, Area B

Wright Pa erson AFB, OH 45433‐3623

A copy of the contractor's analysis on each lot shall also be forwarded to the address below within seven days following submission of the sample for lot acceptance tes ng. The lot analysis shall annotate the lot number and the date of submission and be forwarded to: ,, Commander, DLA Avia on ,, ATTN: DSCR‐FACB ,, 6090 Strathmore RD, Bldg 31‐L‐53

Richmond, VA 23237

BP NORTH AMERICA PETROLEUM INC 0BF86 P/N BP TURBO OIL 2380

EASTMAN CHEMICAL COMPANY 74364 P/N EASTMAN TURBO OIL 2380

EXXON MOBIL CORP 72190 P/N MOBIL JET II

NYCO F4101 P/N TURBONYCOIL 600‐1QT

LINE ITEM 00021 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

NSN:014222407

GREASE<(>,<)> SILICONE INSULATED ELECTRIC MOTOR

UNIT OF ISSUE = TUBE (TU), ONE TU CONTAINS 5.3 OUNCES NET WT.

FOAM SEAL, INC. 00CE9 P/N G351

TRIUMPH CONTROLS, LLC 78710 P/N 57352‐02

LINE ITEM 00022 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:024

PACK CODE:U

SPECIAL MARKING CODE:00 ‐00 No special marking

NSN:012598231

METHYL PURPLE ALKALINITY STANDARD

THE TOTAL MATTER TEST FOR DISTILLED WATER IS NOT REQUIRED. ASTM D 1888

HAS BEEN CANCELLED BY ASTM.ALL OTHER REQUIREMENTS FOR THE DISTILLED

WATER (ASTM D 1193, TYPE II) ARE REQUIRED.

CALIBRATION REQUIREMENTS: CONTRACTOR'S INSPECTION AND TEST EQUIPMENT

UTILIZED IN DETERMINING CONFORMITY OF SUPPLIES WITH CONTRACT

REQUIREMENTS SHALL HAVE A CURRENT VALID CALIBRATION TRACEABLE TO

NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (NIST). THIS CALIBRATION

IS TO HAVE BEEN PERFORMED WITHIN THE PAST 12 MONTHS OR THE CONTRACTOR

MAINTAINS SUFFICIENT DOCUMENTED RECORDS PROVING CONTINUING EQUIPMENT

ACCURACY AND CONTROL THROUGHOUT THE ESTABLISHED INTERVAL. INSPECTION AND

TEST: PRIOR TO SAMPLE SUBMITTAL FOR GOVERNMENT ACCEPTANCE TESTING (GAT),

THE CONTRACTOR SHALL PERFORM ALL REQUIRED SPECIFICATION TESTS. THE TESTS

SHALL BE PERFORMED ON SIX SAMPLES RANDOMLY SELECTED BY THE CONTRACTOR

FROM EACH LOT/BATCH THE TESTS TO BE PERFORMED ARE BASED ON THE COMMODITY

TO BE TESTED. THE TESTS SPECIFIED IN SECTION 4.4 OF DOD‐R‐23679F(SH), 8

AUG 86 SHALL BE USED. ANY FAILURE SHALL BE CAUSE FOR REJECTION OF THE

LOT/BATCH REPRESENTED BY THE SAMPLES. THE CONTRACTOR SHALL CORRECT ANY

DEFICIENCIES IN THE SUPPLIES PRIOR TO SCHEDULING A SECOND AND FINAL

TEST. IF THE SAMPLES FAIL TO PASS THE SECOND TEST, THE CONTRACTOR SHALL

REFER THE MATTER TO THE PROCUREMENT CONTRACTING OFFICER (PCO) FOR

APPROPRIATE ACTION. THE PCO, AFTER CONSIDERING ALL RELEVANT

CIRCUMSTANCES, MAY GRANT THE CONTRACTOR THE OPPORTUNITY TO CORRECT ANY

DEFICIENCY OR MAY TAKE STEPS TO IMMEDIATELY TERMINATE THE CONTRACT FOR

DEFAULT, WHICHEVER ACTION IS IN THE BEST INTEREST OF THE GOVERNMENT.

UPON COMPLETION OF CONTRACTOR TESTING, THE CONTRACTOR WILL IMMEDIATELY

SELECT SIX SAMPLES FOR GAT SAMPLES SHALL BE SELECTED FROM EACH LOT.

THESE SAMPLES AND A COPY OF THE CONTRACTOR'S LOT ANALYSIS SHALL BE

FORWARDED AT THE CONTRACTOR'S EXPENSE TO THE FOLLOWING LABORATORY FOR

GAT: COMMANDING OFFICER NAVAL SURFACE WARFARE CENTER CARDEROCK DIVISION

NAVAL SHIP SYSTEMS ENGINEERING STATION CODE 614 PHILADELPHIA, PA

19112‐5083 PENDING RECEIPT OF ACCEPTANCE NOTICE OF THE LOT/BATCH FROM

THE NAVAL LABORATORY OR AUTHORIZATION FROM THE PCO, THE CONTRACTOR SHALL

WITHHOLD SHIPMENT OF THE LOT/BATCH. THE TIME ALLOWED FOR COMPLETION OF

GAT IS 15 WORKDAYS FROM RECEIPT OF SAMPLES AT THE LABORATORY. THE

LABORATORY WILL FORWARD A COPY OF THE DD FORM 1222 TO: COMMANDER,

DEFENSE SUPPLY CENTER RICHMOND ATTN: DSCR‐FAJA, 8000 JEFFERSON DAVIS

HIGHWAY RICHMOND, VA 23297‐5000 A COPY OF THE LAB ANALYSIS (GAT) AND

NOTICE OF ACCEPTANCE SHALL BE PROVIDED TO THE CONTRACTOR BY THE TEST

LAB.IF THE LABORATORY FAILS TO NOTIFY THE CONTRACTOR OF TEST RESULTS

WITHIN 15 WORKDAYS, AND SUCH DELAY CAUSE THE CONTRACTOR TO BE UNABLE TO

MEET THE SCHEDULED DELIVERY DATE, THE PCO WILL EXTEND THE CONTRACT

DELIVERY SCHEDULE BY A PERIOD CORRESPONDING TO THE DELAY WITHOUT PAYMENT

CONSIDERATION BY THE CONTRACTOR.

MARK AND LABEL IAW MIL‐STD‐129R(2)

UNIT OF ISSUE = BOX (BX), ONE BX CONTAINS SIX EACH 100 ML BOTTLES.

REFERENCE NUMBER:RS023

IAW BASIC SPEC NR MIL‐DTL‐23679G

REVISION NR G DTD 06/14/2021

PART PIECE NUMBER: CLASS P

LINE ITEM 00023 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

CONTRACTOR'S NEW & UNUSED PARTITIONED

FIBERBOARD BOX. MARK/LABEL EACH BOX

IAW DOD‐R‐23679 & MIL‐STD 129.

NSN:004022372

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD072

REFERENCE NUMBER:A1036

REFERENCE NUMBER:A1094

UNIT OF ISSUE = CAN (CN), ONE CN CONTAINS 5.0 GALLONS.

SHELF LIFE: TYPE II, SLC 6 24‐MONTHS.

Quality Assurance:

From the first produc on lot or batch of this contract, the Contractor shall select and forward a two gallon sample, with the contractor's lot analysis, to:

,,,,Army Petroleum Center

,,,,ATTN: AMSTA‐LC‐CJPT

,,,,Bldg 85‐3

,,,,New Cumberland, PA 17070‐5005.

The sample and lot analysis shall be forwarded within four days a er packaging of the lot has been completed. The sample and lot analysis shall be furnished without charge to the Government, and shall be packaged, packed, marked, and shipped at the contractor's expense. Any defec ve item discovered by the Government a er shipment may be cause for rejec on of the en re contract quan ty. This does not apply to material damaged in transit.

IAW BASIC SPEC NR MIL‐PRF‐46167D NOT 3

REVISION NR D DTD 07/20/2017

PART PIECE NUMBER: M461673‐OEA‐30

LINE ITEM 00024 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

NSN:014245540

PARTING COMPOUND

REFERENCE NUMBER:A1097

MARK IN ACCORDANCE WITH MIL‐STD‐129R(2) THAT WILL ALSO INCLUDE LOT OR

BATCH NUMBER. INSTRUCTIONS FOR USE AND STORAGE MUST BE INCLUDED AS WELL.

UNIT OF ISSUE = CAN (CN), ONE CN EQUATES TO AN AEROSOL CAN THAT CONTAINS

10.5 FL. OZ.

REFERENCE NUMBER:RS011

LOCTITE CORP 05972 P/N 38428

LINE ITEM 00025 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

SPECIAL MARKING CODE:32 ‐32 Type I, shelf life

MANUFACTURER'S AEROSOL CAN. PACK 12

CANS IN PARTITIONED FIBERBOARD BOX.

MARK & LABEL EACH CAN & BOX IAW

MIL‐STD 129.

GHS COMPLIANT SDS AND COPY OF PRODUCT LABEL(S) REQUIRED

NSN:010536688

CLEANER, LUBRICANT AND PRESERVATIVE. /CLP/

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ011

QPL APPLIES: MIL‐PRF‐63460 TYPE A

QUALITY ASSURANCE REQUIREMENTS Per MIL‐PRF‐63460F Para

6.2: documents should specify the following:

a. Title, number, and date of this specifica on, and its related QPL

(see 6.3) b. Title, number, and date of all documents referenced (see

2.1).

c. Type of CLP required (see 1.2.1).

d. Quan ty of CLP required.

e. Conformance tests required (see 6.3.1).

f. Type and size of container (see 6.9).

g. Packaging requirements (see 5.1 and 6.9)

h. Toxicological Data Requirements (see 3.2.3 and 4.2.3 and 6.4).

SELECT A ONE‐GALLON SAMPLE AND FORWARD THE SAMPLE WITH THE CONTRACTOR'S

LOT ANALYSIS TO THE ADDRESS AS INDICATED BELOW. THE SAMPLE AND LOT

ANALYSIS SHALL BE FORWARDED WITHIN 7 DAYS AFTER RECEIPT OF PURCHASE

ORDER. THE LOT ANALYSIS SHALL BE ANNOTATED WITH NSN, LOT NUMBER,

DELIVERY ORDER NUMBER, CONTRACT NUMBER AND DATE OF SUBMISSION. THE

SAMPLE AND LOT ANALYSIS SHALL BE SENT TO THE FOLLOWING ADDRESSEE AT THE

CONTRACTOR'S EXPENSE:

ARMY CCDC Ground Vehicle Systems Center Petroleum Center

5085 U Avenue

Building 85

New Cumberland, PA 17070‐5083

FOR BATCHES SUPPLIED IN MORE THAN ONE CONTAINER SIZE, REPRESENTATIVE

SAMPLES SHALL BE TAKEN AS SPECIFIED IN THE NSN ASSOCIATED WITH EACH

DIFFERENT CONTAINER FILLING.

ANY DEFECTIVE ITEM DISCOVERED BY THE GOVERNMENT AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. THIS CLAUSE DOES

NOT APPLY TO ITEMS DAMAGED DURING SHIPMENT.

UNIT OF ISSUE = GALLON (GL), ONE GL EQUATES TO A PLASTIC BOTTLE CONTAINS

1.0 GALLON.

IAW BASIC SPEC NR MIL‐PRF‐63460G

REVISION NR G DTD 11/30/2023

LINE ITEM 00026 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

UNIT CONT:ZZ OPI:M

PACK CODE:U

NSN:001818097

REFERENCE NUMBER:RP001

QPL APPLIES: MIL‐PRF‐9000

QUALITY ASSURANCE: During the dura on of this contract, the Contractor shall forward a copy of the inspec on/test report on each lot/batch of product to: ,,,, Commander ,,,, Defense Supply Center Richmond ,,,, ATTN: DSCR‐FAJA ,,,, 8000 Jefferson Davis Highway ,,,, Richmond, VA 23297‐5000

IAW BASIC SPEC NR MIL‐PRF‐009000K

REVISION NR K DTD 04/27/2011

LINE ITEM 00027 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

NSN:002316676

LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, PETROLEUM

REFERENCE NUMBER:RQ011

NATO CODE: O‐133

THE FOLLOWING EXCEPTION IS TAKEN TO MIL‐PRF‐6081D DATED NOV 10, 1997: 1.

TABLE 1, FOR THE COPPER STRIP CORROSION DELETE "121 C (250 F)" AND

SUBSTITUTE "100 C (212 F)".

UNIT OF ISSUE = DRUM (DR), ONE DR (18/18 GAGE) CONTAINS 55 GALLONS.

IAW BASIC SPEC NR MIL‐PRF‐6081E(1)

REVISION NR E DTD 09/10/2019

PART PIECE NUMBER: GRADE 1010

LINE ITEM 00028 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

NSN:013690048

SEALING COMPOUND

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD072

U/I = CA

SIZE: 2.5 FL OZ CARTRIDGE.

DESCRIPTION

A TWO‐PART, POLYTHIOETHER WINDSHIELD SEALANT COMPOUND FOR USE ON GLASS,

POLYCARBONATE, ACRYLIC, AND OTHER AIRCRAFT SUBSTRATES.

CLASS B‐1/2: SUITABLE FOR APPLICATION BY EXTRUSION GUN OR SPATULA; 1/2

HOUR WORK LIFE.,,

COLOR: GRAY

REFERENCE NUMBER:RS009

PRC DESOTO INTERNATIONAL INC 85570 P/N PR‐1829 B‐1/2 2.5 OZ

IAW REFERENCE SPEC NR MIL‐S‐38714B NOT 2

REVISION NR B DTD 04/09/2012

IAW REFERENCE NON GOVT STD SAE AS5502D

REVISION NR D DTD 04/01/2016

LINE ITEM 00029 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0

UNIT CONT:10 OPI:M

PACK CODE:U

UI = CA

CA = 2 fl oz in a 2.5 fl oz cartridge.

ITEM MARKING

Each item shall be marked with the following:

(1) marking in accordance with SAE Aerospace Standard AS5502, paragraphs

5.2.1 and 5.2.2 except for specifica on tle, AMS designa on, class, and type.

(2) instruc ons for use, thinning, mixing, shaking, etc. on unit containers only

(3) instruc ons for storage, i.e. do not freeze, requires refrigera on, etc.

(4) if a kit, then each kit component shall be marked with the kit name and component part.

(5) manufacturer's name and part number

(6) if applicable, the maximum vola le organic compound content (VOC), less water and exempt solvents, in lbs/gl or grams/liter.

(7) if the item is on an exis ng contract, the supplier shall follow the pre‐arranged California South Coast Air Quality Management District labeling requirements.

NSN:014292368

CLEANING COMPOUND, AIRCRAFT SURFACES

QPL APPLIES: MIL‐PRF‐87937

UNIT OF ISSUE = GALLON (GL), ONE GL CONTAINS 1.0 GALLONS.

IAW BASIC SPEC NR MIL‐PRF‐87937E

REVISION NR E DTD 09/27/2022

PART PIECE NUMBER: TYPE IV

LINE ITEM 00030 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MANUFACTURER'S UNIT CONTAINER.

PACK EACH CONTAINER IN FIBERBOARD BOX.

MARK AND LABEL UNIT CONTAINER AND BOX

IAW MIL‐STD 129 AND MIL‐PRF 87937.

GHS Compliant SDS and copy of Product Label(s) Required

NSN:002659408

HYDRAULIC FLUID, PETROLEUM BASE

UNIT OF USSUE = DRUM (DR), ONE DR CONTAINS 55 GALLONS

GOVERNMENT LOT ACCEPTANCE TESTING IS REQUIRED

SHELF LIFE: TYPE II, SLC 6 24‐MONTHS.

MARK & LABEL IAW MIL‐STD‐290H.

Quality Assurance:

From each produc on lot or batch of this contract, the contractor shall select a sample and forward the sample with the contractor's lot analysis to the address as indicated below. The sample and lot analysis with the delivery order number, contract number, lot number, NSN and date of submission shall be forwarded within 7 days a er packaging of the lot has been completed. The sample and lot analysis shall be furnished without charge to the Government and shall be packaged, packed, marked, and shipped at the contractor's expense to:

Aerospace Fuels Lab<(>,<)>

HQ AFPET/AFTLA<(>,<)>

2430 C Street<(>,<)>

Bldg 70, Area B<(>,<)>

Wright‐Pa erson AFB, OH 45433‐7632

The sample shall be taken as follows: The filling opera on shall be divided into 3 evenly spaced intervals. One‐gallon of product, from a drum randomly selected from each of the 3 filling intervals, shall be withdrawn and placed into a clean one gallon container and sealed. The type of sample container is not restricted (i.e., may be glass or plas c bo les, metal cans, etc.), but containers must be compa ble with the hydraulic fluid, be unused (new) and cleaned prior to taking samples, be sealable, and be acceptable to the carrier who will transport the samples to the laboratory. For batches supplied in more than one container size, representa ve samples shall be taken as specified in the NSNs associated with each different container filling.

Acceptance or rejec on of each individual batch will be based on tests conducted on the samples required above. The Government guarantees that upon receipt of said samples at the Government laboratory, tes ng will be completed and a decision on the product's acceptability will be received by the contractor through the Government QAR within 10 working days. The Government also agrees to no fy the contractor as soon as the samples arrive at the tes ng facility.

Ini al no fica on of the Government's decision on the acceptability of an individual batch may be verbal or wri en; however, if verbal no fica on is given, wri en no fica on shall follow within 24 hours. If no fica on on the acceptability of an individual batch is not received by the contractor through the Government QAR or directly from the lab to the contractor within 10 working days a er receipt of the samples, the Government shall accept the supplies by execu ng a DD

Form 250. However, if no fica on of failure of the samples is subsequently received by the contractor, all supplies in the batch from which the samples were drawn and which have not yet been shipped shall be withheld from shipment un l authoriza on to resume shipment is received, regardless of whether the batch has previously been accepted by the Government.

IAW BASIC SPEC NR MIL‐PRF‐5606J

REVISION NR J DTD 03/05/2018

IAW REFERENCE DRAWING NR 13873 002659408‐07243

REVISION NR DTD 08/31/2007

LINE ITEM 00031 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

PACK CODE:U

REFERENCE NUMBER:ZDP01 OBJECT TEXT ID ST

NSN:005842560

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

QPL APPLIES: MIL‐PRF‐17672 GRADE 68, 2135‐T‐H

UNIT OF ISSUE = DRUM (DR), ONE DR CONTAINS 55 GALLONS

UNLESS OTHERWISE REQUIRED BY SCHEDULE OR SPECIFICATION, THE HYDRAULIC

FLUID SHALL BE PASSED THRU 10 MICRON FILTER IMMEDIATELY PRIOR TO THE

FILLING CONTAINER.

THE USE OF A CLASS I OZONE DEPLETING SUBSTANCE (ODS) IN THE MANUFACTURE

AND TESTING OF THIS HYDRAULIC FLUID IS STRICTLY PROHIBITED, AND IT IS

THE MANUFACTURER'S RESPONSIBILITY TO IDENTIFY A SUITABLE SUBSTITUTE IN

ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS.

QUALITY ASSURANCE: FROM THE FIRST PRODUCTION LOT OR BATCH OF THIS

CONTRACT, THE CONTRACTOR SHALL SELECT AND FORWARD A TWO GALLON SAMPLE,

WITH THE CONTRACTOR'S LOT ANALYSIS, TO:

ARMY PETROLEUM CENTER

ATTN: AMSTA‐LC‐CJPT

BLDG 85‐3 ,,,,

NEW CUMBERLAND, PA 17070‐5005

THE SAMPLE AND LOT ANALYSIS SHALL BE FORWARDED WITHIN FOUR DAYS AFTER

PACKAGING OF THE LOT HAS BEEN COMPLETED. THE SAMPLE AND LOT ANALYSIS

SHALL BE FURNISHED WITHOUT CHARGE TO THE GOVERNMENT, AND SHALL BE

PACKAGED, PACKED, MARKED, AND SHIPPED AT THE CONTRACTOR'S EXPENSE. ANY

DEFECTIVE ITEM DISCOVERED BY THE GOVERNMENT AFTER SHIPMENT MAY BE CAUSE

FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. THIS DOES NOT APPLY TO

MATERIAL DAMAGED IN TRANSIT.

IAW BASIC SPEC NR MIL‐PRF‐17672E NOT 2

REVISION NR E DTD 03/16/2023

PART PIECE NUMBER: GRADE 68

LINE ITEM 00032 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

NSN:000827524

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

UNIT OF ISSUE = DRUM (DR), ONE DR CONTAINS 10.0 GALLONS.

GOVERNMENT LOT ACCEPTANCE TESTING IS REQUIRED

SHELF LIFE: TYPE II, SLC 6 24‐MONTHS

THE FOLLOWING EXCEPTION IS TAKEN TO MIL‐PRF‐5606H(3) DATED 09/07/2006:

1. TABLE V CITES FEDERAL TEST METHOD (FTM) 350. PARA. 5.2 AND 6.1.1 OF

FTM 350 DELETE "1,1,1‐TRICHLOROETHANE" AND SUBSTITUTE "HEPTANE, HEXANE,

PETROLEUM NAPHTHA, OR ACETONE".

EXCEPTION:

THE FOLLOWING EXCEPTION TO TABLE V, MIL‐PRF‐5606H(3), DATED SEPTEMBER

06, 2006 IS TAKEN: DELETE "SOLID PARTICLE COUNT TEST METHOD 3012" AND

REPLACE WITH DSCR DRAWING 002526383‐07243, "PARTICLE COUNT (MOD METHOD

3012)".

COMPOUND‐LINED

QUALITY ASSURANCE: FROM EACH PRODUCTION LOT OR BATCH OF THIS CONTRACT,

THE CONTRACTOR SHALL SELECT A SAMPLE AND FORWARD THE SAMPLE WITH THE

CONTRACTOR'S LOT ANALYSIS TO THE ADDRESS AS INDICATED BELOW. THE SAMPLE

AND LOT ANALYSIS WITH DELIVERY ORDER NUMBER, CONTRACT NUMBER, LOT

NUMBER, NSN AND DATE OF SUBMISSION SHALL BE FORWARDED WITHIN 7 DAYS

AFTER PACKAGING OF THE LOT HAS BEEN COMPLETED. THE SAMPLE AND LOT

ANALYSIS SHALL BE FURNISHED WITHOUT CHARGE TO THE GOVERNMENT AND SHALL

BE PACKAGED, PACKED, MARKED, AND SHIPPED AT THE CONTRACTOR'S EXPENSE TO:

AEROSPACE FUELS LAB<(>,<)>

HQ AFPET/AFTLA<(>,<)>

2430 C STREET<(>,<)>

BLDG 70, AREA B<(>,<)>

WRIGHT‐PATTERSON AFB, OH 45433‐7632

THE SAMPLE SHALL BE TAKEN AS FOLLOWS: THE FILLING OPERATION SHALL BE

DIVIDED INTO 3 EVENLY SPACED INTERVALS. ONE‐GALLON OF PRODUCT FROM A

DRUM RANDOMLY SELECTED FROM EACH OF THE 3 FILLING INTERVALS, SHALL BE

WITHDRAWN AND PLACED INTO A CLEAN ONE GALLON CONTAINER AND SEALED. THE

TYPE OF SAMPLE CONTAINER IS NOT RESTRICTED (I.E., MAY BE GLASS OR

PLASTIC BOTTLES, METAL CANS, ETC.), BUT CONTAINERS MUST BE COMPATIBLE

WITH THE HYDRAULIC FLUID, BE UNUSED (NEW) AND CLEANED PRIOR TO TAKING

SAMPLES, BE SEALABLE, AND BE ACCEPTABLE TO THE CARRIER WHO WILL

TRANSPORT THE SAMPLES TO THE LABORATORY. FOR BATCHES SUPPLIED IN MORE

THAN ONE CONTAINER SIZE, REPRESENTATIVE SAMPLES SHALL BE TAKEN AS

SPECIFIED IN THE NSNS ASSOCIATED WITH EACH DIFFERENT CONTAINER FILLING.

ACCEPTANCE OR REJECTION OF EACH INDIVIDUAL BATCH WILL BE BASED ON TESTS

CONDUCTED ON THE SAMPLES REQUIRED ABOVE. THE GOVERNMENT GUARANTEES THAT

UPON RECEIPT OF SAID SAMPLES AT THE GOVERNMENT LABORATORY, TESTING WILL

BE COMPLETED AND A DECISION ON THE PRODUCT'S ACCEPTABILITY WILL BE

RECEIVED BY THE CONTRACTOR THROUGH THE GOVERNMENT QAR WITHIN 10 WORKING

DAYS. THE GOVERNMENT ALSO AGREES TO NOTIFY THE CONTRACTOR AS SOON AS

THE SAMPLES ARRIVE AT THE TESTING FACILITY.

INITIAL NOTIFICATION OF THE GOVERNMENT'S DECISION ON THE ACCEPTABILITY

OF AN INDIVIDUAL BATCH MAY BE VERBAL OR WRITTEN; HOWEVER, IF VERBAL

NOTIFICATION IS GIVEN, WRITTEN NOTIFICATION SHALL FOLLOW WITHIN 24

HOURS. IF NOTIFICATION ON THE ACCEPTABILITY OF AN INDIVIDUAL BATCH IS

NOT RECEIVED BY THE CONTRACTOR THROUGH THE GOVERNMENT QAR OR DIRECTLY

FROM THE LAB TO THE CONTRACTOR WITHIN 10 WORKING DAYS AFTER RECEIPT OF

THE SAMPLES, THE GOVERNMENT SHALL ACCEPT THE SUPPLIES BY EXECUTING A DD

FORM 250. HOWEVER, IF NOTIFICATION OF FAILURE OF THE SAMPLES IS

SUBSEQUENTLY RECEIVED BY THE CONTRACTOR, ALL SUPPLIES IN THE BATCH FROM

WHICH THE SAMPLES WERE DRAWN AND WHICH HAVE NOT YET BEEN SHIPPED SHALL

BE WITHHELD FROM SHIPMENT UNTIL AUTHORIZATION TO RESUME SHIPMENT IS

RECEIVED, REGARDLESS OF WHETHER THE BATCH HAS PREVIOUSLY BEEN ACCEPTED

BY THE GOVERNMENT.

THIS ITEM IS USED IN A MERCURY FREE ENVIRONMENT AND MUST ADHERE TO THE

REQUIREMENTS AS SPECIFIED IN MERCURY FREE DRAWING 13873‐03‐0001. A COPY

OF THIS DRAWING IS AVAILABLE AT DSCR AND CAN BE OBTAINED VIA INTERNET AT

WEBSITE:

HTTP://WWW.DSCR.DLA.MIL/USERWEB/DSCRBAT/QAPS.HTM(ALL LOWER

CASE).

IAW BASIC SPEC NR MIL‐PRF‐5606J

REVISION NR J DTD 03/05/2018

PART PIECE NUMBER: TYPE II SHELF LIFE 24 MOS

IAW REFERENCE DRAWING NR 81349 MIL‐H‐5606

REVISION NR G DTD 09/01/1994

PART PIECE NUMBER: MIL‐H‐5606

IAW REFERENCE DRAWING NR 13873 000827524‐07243

REVISION NR DTD 08/31/2007

LINE ITEM 00033 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

NSN:015513910

HEAT TRANSFER FLUID

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

UNIT OF ISSUE = CONTAINER (CO), ONE CO CONTAINS 11.0 LB.

3M COMPANY 76381 P/N 7100003808

LINE ITEM 00034 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MANUFACTURER'S UNIT CONTAINER. PACK EACH IN FIBERBOARD BOX. MARK/LABEL

EACH IAW MIL‐STD 129.

ORIGINAL MANUFACTURER'S COMMERCIAL UNIT PACKAGING IS REQUIRED.

REPACKAGING IS NOT AUTHORIZED.

1 CO = 11 LB

NSN:001817594

CLEANING COMPOUND, ENGINE GAS PATH

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD064

REFERENCE NUMBER:ZD090

QPL APPLIES: MIL‐PRF‐85704

UNIT OF ISSUE = CAN (CN), ONE CN EQUATES TO A METAL CAN THAT CONTAINS

5.0 GALLONS.

IAW BASIC SPEC NR MIL‐PRF‐85704C NOT 1

REVISION NR C DTD 07/25/2019

PART PIECE NUMBER: TYPE I

IAW REFERENCE QAP 13873 CDRL‐COQC‐22104

REVISION NR DTD 04/08/2022

LINE ITEM 00035 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0

UNIT CONT:MO OPI:M

PACK CODE:U

GHS MARKINGS REQUIRED ON PACKAGING

CANS MUST BE PLACED AND SECURED WITHIN WOODEN CONTAINER TO PREVENT

DAMAGE, INNER CANS AND WOODEN CONTAINER SHALL BE LABELED IAW

MIL‐STD‐129.

NSN:014947677

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD072

MIL‐STD‐129 LABELS ARE REQUIRED, MIL‐STD‐129 LABEL WILL INCLUDE THE

ADDITION OF LOT OR BATCH NUMBER AND WILL BE AFFIXED TO EACH CONTAINER.

REFERENCE NUMBER:RS008

AVIATION DEVICES AND ELECTRONIC 1NPE1 P/N TF2219‐50

AVIATION DEVICES AND ELECTRONIC 1NPE1 P/N TF2219‐50‐ORANGE

LINE ITEM 00036 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

UNIT OF ISSUE: CA (CA EQUALS CARTRIDGE CONTAINING 50 ML)

NSN:014499473

DEICING‐DEFROSTING AND ANTI‐ICING FLUID

REFERENCE NUMBER:RP001

UNIT OF ISSUE = CONTAINER (CO), ONE CO CONTAINS 275 GALLONS.

CONCENTRATED FORM. PROPYLENE GLYCOL BASED.

NO ETHYLENE GLYCOL ALLOWED.

FLUID COLOR SHALL BE GREEN.

CONTRACTOR SHALL PROVIDE WITH OFFER, DOCUMENTATION REQUIRED BY SPEC PARA

4.5, TO INCLUDE PERIODIC, PREPRODUCTION, AND SAE AS5901, AS5900 AND

AS5900 TEST RESULTS. CUSTOMER SHALL CONFORM WITH WARNINGS STATED IN AIR

FORCE: TO 42C‐1‐2 / NAVY: NAVAIR 01‐1A‐520 (PARAGRAPH 3.1.3.2) The crossmixing of fluids from different SAEAMS 1428, Type II/IV suppliers will result in unknown aerodynamic proper es. A. SAE AMS 1428, Type

II/IV fluids shall not be crossmixed with MIL‐A‐8243, Type I/II fluids.

B. SAE AMS 1428, Type II fluid shall not be crossmixed with SAE AMS

1428, Type IV. Example: never crossmix an Octagon, Type II fluid with an

Octagon, Type IV fluid. C. Should there be an accidental crossmixing of fluids as described above, the resul ng mixture shall be sent to disposal. There shall be no excep ons to this requirement. SHELF LIFE

APPLIES ‐ TYPE II, SLC 6 24‐MONTHS. MARK IN ACCORDANCE WITH

MIL‐STD‐129R(2).

IAW BASIC NON GOVT STD SAE AMS1428K

REVISION NR K DTD 10/01/2018

PART PIECE NUMBER: AMS1428 TYPE IV

LINE ITEM 00037 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MANUFACTURER'S COMMERCIAL UNIT

PACKAGING IS REQUIRED.

GHS COMPLIANT SDS AND COPY OF PRODUCT LABEL(S) REQUIRED

NSN:013690049

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD072

U/I = CA

SIZE: 3.5 FL OZ IN A 6.0 FL OZ CARTRIDGE.

COLOR: GRAY

PRC DESOTO INTERNATIONAL INC 85570 P/N PR‐1829 B‐1/2 3.5 OZ

IAW REFERENCE SPEC NR MIL‐S‐38714B NOT 2

REVISION NR B DTD 04/09/2012

LINE ITEM 00038 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

TOS CODE = D

TEMPERATURE FOR STORAGE (TOS) = 60 TO 80 DEG F

TEMPERATURE FOR SHIPMENT IS 60 TO 80 DEG F

TEMPERATURE EXCURSION RANGE IS 60 TO 80 DEG F

***ALL UNIT, INTERMEDIATE, TRANSPORT PACKAGES AND UNIT LOADS SHALL BE

CONSPICUOUSLY MARKED WITH STORAGE TEMPERATURE REQUIREMENT***

PACKAGING: The product shall be furnished in cartridges conforming to

Military Specifica on MIL‐S‐38714B, Sealant Cartridge for Two Component

Materials. There shall be no interac on chemically or physically with the contents which would damage the container or alter the strength, quality, or purity of the contents. Each filled cartridge shall be sealed in an appropriate type bag/envelope. The cartridges shall be closed in a manner that insures the contents shall not spill or leak during shipment, handling, storage, and redistribu on.

NSN:016485549

REFERENCE NUMBER:RP001

SHELF LIFE: TYPE II SLC 7 36‐MONTHS.

MARK AND LABEL IAW MIL‐STD‐290H.

IAW BASIC SPEC NR MIL‐PRF‐2104N

REVISION NR N DTD 04/01/2021

PART PIECE NUMBER: SCPL

LINE ITEM 00039 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

NSN:013690050

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD072

REFERENCE NUMBER:A1036

REFERENCE NUMBER:A1094

REFERENCE NUMBER:ZD073

9 MONTHS

USE: A TWO‐PART, POLYTHIOETHER WINDSHIELD SEALANT COMPOUND FOR USE ON

GLASS, POLYCARBONATE, ACRYLIC, AND OTHER AIRCRAFT SUBSTRATES.

COLOR = GRAY

PRC ‐ DESOTO INTERNATIONAL, INC. 83574 P/N PR‐1829 B‐2/6 OZ

PRC DESOTO INTERNATIONAL INC 85570 P/N PR‐1829 B‐2/ 6 OZ

LINE ITEM 00040 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

U/I = CA

CA = 6 0Z

TOS CODE = D

TEMPERATURE FOR STORAGE (TOS) = 60 TO 80 DEG F

TEMPERATURE FOR SHIPMENT IS 60 TO 80 DEG F

TEMPERATURE EXCURSION RANGE IS 60 TO 80 DEG F

SPECIAL PACKAGING PROCEDURES ZZ

PACKAGING

PACKAGING: The product shall be furnished in cartridges conforming to

Military Specifica on MIL‐S‐38714B, Sealant Cartridge for Two Component

Materials, dated May 15, 1987. There shall be no interac on chemically or physically with the contents which would damage the container or alter the strength, quality, or purity of the contents. Each filled cartridge shall be sealed in an appropriate type bag/envelope. The cartridges shall be closed in a manner that insures the contents shall not spill or leak during shipment, handling, storage, and redistribu on.

PACKING

PACKING: Twenty‐four (24) injec on cartridges packaged as described above shall be further packed in a close‐fi ng, corrugated fiberboard box conforming to Sec on 6(a), Rule 41 of the Uniform Freight

Classif…